Joinery

AUERTECH Blockhausfräse BL100A, Bj.2006

Condition: used, Year of construction: 2010, Chalet construction machineused, good condition, little usedmake Krüsitype CMI 40year of manufacture 2010CE type-approvedbsi 140 mm round timber corner jointssaw 1xdrilling 1xrouting 3xworkpiece height 200 mmworkpiece width 250 mmweight approx. 2200 kgTotal connected load approx. kWStorage location 97447 Gerolzhofen, free loaded, unpackedHandover in actual condition as inspected,without guarantee and warranty Fjdevwfqqspfx Ag Roft

Condition: new, Year of construction: 2023, Application combs 15 mm Application combs 20 mm finger joint profile 15 mm finger joint profile 20 mm Fjdpfx Aeiacbpjg Rjft delivery time 3 days

Year of construction: 2022, condition: new, Pallet Board Stacker New upgraded M4 version. Included: - Unscrambler - Stacker with integrated lift - 2 spacer dispensers with support frame Ffsdpohhnblofx Ag Rjt - Outfeed conveyor (one pack on the lift on on the outfeed) - pack lift for easy forklift operation

Year of construction: 1998, condition: excellent (used), Kap Saw Reinchardt NC 700 automatic Manufacturer Reinchardt Model / machine type NC 700 Year of production 1998 Machine category Kapła Kapowa Location Fjdpjd H Hmhsfx Ag Rjft Gorzów Wlkp. Conditions of delivery OWN RECEIPT Cost of delivery Customer cover Start type to be agreed Description Comments CUTTING SAW FOR CUSTOMIZED DIMENSIONS, ACCURACY UP TO 1MM, NEW CONTROLLER, SAW BLADDER BY HYDRAULIC AGREEMENT

Condition: excellent (used), functionality: fully functional, Vertical, double-sided press for wood by C.O.P.E. Ffedeudy A Nspfx Ag Rjt Two working fields with dimensions of 620x110cm.

Year of construction: 2003, condition: ready for operation (used), functionality: fully functional, Drying chamber Make: Mühlböck Ffodjwr Tzfopfx Ag Rjt Type: ZLSM Year of construction: 2003 Internal dimensions approx. 7400 x 4500 x 4250 mm (LxWxH) 3 fans each 3 kW 10 measuring points With frequency converter With control system Heating power 223 kW Water temperature 85 °C Water quantity 14 m³/h Voltage 230/400 Volt Connected load 12 kW Fans 3 x 3 kW Control program MB Intellevent 5000

Condition: like new (used), Year of construction: 2004, HYDRAULIC PRESS FOR GLUING WOODEN ELEMENTS TO THE THICKNESS OF HSKG Category: VI - Hydraulic presses for gluing wooden parts. The HSKG device is used for gluing wooden cut-thickness parts under high pressure of hydraulic cylinders. The range of achievable crushing forces per cylinder is 5-11kN (horizontal) and 25-55kN (vertical). The gluing of elements is carried out in a stack with the dimensions of the loading field. Stack forming is carried out by hydraulic compression between the sliding vertical beams and the vertical slats of the transverse cylinders. Both stack forming elements are equipped with wooden or metal inserts corresponding to the profile of the slat stack. Gluing wooden elements from the thickness improves the quality of the frames, reduces the cost of machining, reduces the amount of wood waste. Technical and operational data ( of standard execution HSKG - 6m ) Number of loading fields pcs 4 Dimensions of a single loading field - loading height - length of slats in one field mm mm 1140 1530 Maximum width of slats mm 150 Maximum length of glued elements mm 3120 Installed power kW 3 Electricity supply V AC 3/N/PE, 400V 50Hz Control voltage V DC 24 Number of actuators on one field: mm mm O 50x100 - 3 pcs. Fodjtrl R Ajpfx Ag Rsft O 80x100 - 3 pcs. External dimensions (L x W x H) mm 8120x1000x2300 Weight of the device kg 4800 At the request of the customer, we also make other configurations of pressure actuators control depending on the expected length of glued elements, as well as other lengths of individual working fields in different quantities in the whole press set, and working width of up to 220 mm maximum with increased pressure force.

Condition: good (used), Obel Pedersen RF feed band press Opel Pedersen press type 2412 Fodpfx Agjdybr Re Rsft Press length 2500 mm width 600 mm with gluing, carriage, HF generator T20 V and water cooling System has been released.

Year of construction: 2023, condition: used, Used machine Year of manufacture: 2023, delivered in 2024 Condition: as new, machine is in original packaging and has not been commissioned Ffsdpfx Aoxavtkog Rot Equipment and technical data: Infeed Table / Cross Conveyor: - Number of strands: 6 × Supergrip timing belts - Pitch: 650 / 650 / 850 / 1500 / 1500 mm - Length: approx. 1.8 m - Drive: geared motor, 1.5 kW - Minimum workpiece infeed length: 0.8 m - Function: Automatic transfer of raw material by lowering level to the infeed table Infeed Table: - Smooth sliding table with sliding plastic for damage-free feeding of raw material by servo pusher into the machining zone - Support width: approx. 200 mm BLOCKHAUS 4F-SERVO (main milling unit): - Machining dimensions: 140 × 200 mm - Maximum horizontal milling depth top: 60 mm - Maximum horizontal milling depth bottom: 35 mm - Maximum vertical milling depth: 95 mm - Milling spindles: Ø 30 mm - Horizontal milling tools: 2 × D = 220 mm × W = 120 mm - Vertical milling tools: 2 × D = 280 mm × W = 120 mm - Motor power: 4 × 4.0 kW - Feed: horizontal and vertical via SERVODRIVE, infinitely variable via software - Milling depth adjustment: spindle with digital counter - Workpiece clamping devices: vertical pneumatic, horizontal pneumatic - Extraction: below-floor hopper Ø 160 mm (pit by customer required) - Control: IPC / PLC / IITO software - Machine frame prepped for end tenon or dovetail milling, drilling unit and crosscut saw - Machine enclosure: fully closed, with swiveling safety hood (gas strut, viewing window) - Electrical control cabinet on base, cable carrier 3.0 m Option i (automatic milling depth adjustment for 4F milling unit): - Four additional NC-controlled servo axes for automatic positioning of the 4F tools - Control via IPC / IITO software - Function: automatic milling depth adjustment with ±0.1 mm tolerance - Extended machining capabilities: - individual grooves and millings on four component sides, - recesses and markings for window and door openings, - double and triple joints, - half corner joints (e.g. for top and bottom log beams) Tools: - 2 × 3-piece groove cutter D 220 mm, width 21–65 mm, LM - 2 × 3-piece groove cutter D 280 mm, width 21–65 mm, LM - 1 × end tenon cutter D 240 mm × 20 mm - 1 × dovetail cutter D 40 mm, width 15 mm Combination End Tenon & Dovetail Milling Unit: - 3-axis milling unit for production of end tenons and dovetail joints - End tenon cutter Ø 240 mm × width 30 mm - Max. milling depth for end tenon: 40 mm - Dovetail width variable - Motor power: 4.0 kW - Speed: inverter-controlled, max. 4,500 rpm - Feed (DT.Y axis): SERVODRIVE, infinitely variable - Height adjustment (DT.Z axis): SERVODRIVE - Rotation adjustment (DT.R axis): SERVODRIVE - Workpiece clamping device: vertical pneumatic - Minimum beam thickness for longitudinal connection: 80 mm - Control: automatic via IPC / PLC / IITO software Horizontal Drilling Unit with Drill Guide (BGD SERVO): - Max. drilling diameter: Ø 30 mm - Drill Ø = 20 mm included in delivery - Motor power: 1.1 kW - Speed: 1,500 rpm - Feed: SERVODRIVE, infinitely variable - Height adjustment (Z axis): SERVODRIVE, digital counter - Workpiece clamping device: vertical pneumatic

Condition: new, SIZES OF THE TABLES: Length: Min.800mm, Max.1600mm Width: Min.50mm, Max.150mm Ffjdpfx Ashpbnnog Rst Thickness: Min.10mm, Max.25mm (optional up to 100mm)