Mia Equipements

Condition: used, IBAG Screening machine 5500 x 1500 mm - 1 Decks Itodpfx Asyv D D Eebced

Condition: used, IBAG Screening Machine 4500 x 1500 mm - 2 decks Itedpeyv D Dxjfx Abcjd

Condition: ready for operation (used), Table size: 130 x 265 mm Itedeyv D Drspfx Abced Table height: 180 mm

Condition: used, Head Drum FAM (unused) Beltwidth: 2000 mm Roll lenght: 2200 mm, Ø 830 mm Incl.: Bearings and rubber liner Iodeyv D Dlepfx Abcotd

Condition: used, Eagle Gear Box Reduction : i = 1 : 85 Dimensions : 1100 mm x 800 mm x 400 mm Ext. Axle : diam. 50 mm, with Pulley SPC 400-3 Int. Axle : diam. 100 mm, with socket Itedpfxoyv D Dfj Abcjd

Condition: used, Lot of Belt Conveyors, consisting of Nr1= Itedpfx Aeyv D A Ujbcsd

Condition: excellent (used), Wide Belt Sander SCM Casadei Libra 30 Model – Libra 30 Sanding width: 950 mm Max material height: 170 mm Iodpfxsyv D A Io Abcjtd 2 sanding units (1 x steel roller, 1 x combination unit) Finishing pad 15 kW motor, star/delta starting Two feed speeds Electric table adjustment Table position display Oscillation with photocell control The sander is in very good condition, fully operational and ready for work Weight approx. 1100 kg

Condition: used, 50 pieces Rollertables Length 2200-3000 mm Width 500 mm Ijdpfx Absyv D Azecotd

Condition: used, Belt Conveyor Itedpfx Asyv D Ausbcod

Condition: used, Warman-Schabaver Pumps Typ : 8/6 - 8/6 RL - D150_43 - M150_N - M150_H Itjdpfx Ajyv D Anjbcsd

Condition: ready for operation (used), Table diameter: 250 mm Itodpfx Aboyv D Ahecod Table height: 105 mm

Condition: used, Habermann Pump-units Type HPK 200/560 In 250mm, Out 200mm Cap.: 450-800 cub/h Driving: E-Motor 90 kW including : Chassis and Spare-parts Itsdpfsyv D Absx Abced

Condition: good (used), Year of construction: 2012, operating hours: 2,322 h, load capacity: 1,000 kg, lifting height: 5,750 mm, fuel type: electric, mast type: triplex, construction height: 2,450 mm, mileage: 2,322 km, JUST IN Triplex reach truck Isdpeyv Dz Dofx Abcetd Brand: Still (Germany) Year of manufacture: 2012 ONLY 2,322 operating hours Overall height: 2,450 mm Lift height: 5,750 mm Equipped with: FREELIFT and SIDESHIFT Battery supplied with charger and automatic filling system

Condition: used, Bakker Magnetics Permanent Magnetic Block (unused) Iodpsyv Dzwjfx Abcetd

Condition: used, Electro Magnetic Block. Itedpfxjyv Dzke Abcod

Condition: excellent (used), mileage: 7,26,566 km, power: 331 kW (450.03 HP), first registration: 11/2017, fuel type: diesel, tire size: 315/60 R22.5, axle configuration: 4x2, wheelbase: 3,700 mm, fuel: diesel, brakes: retarder, color: other, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, total length: 6,120 mm, total width: 2,550 mm, Year of construction: 2017, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, fog lights, fridge, navigation system, parking air conditioner, parking heater, retarder, = Additional Options and Accessories = - (Roof) Spoiler - Aluminum fuel tank - Climate control - Sleeper berth - Radio/CD player - Side bar - Electrically adjustable side mirrors - Sun visor Itodpfxoyv Dzdo Abcsd - Digital tachograph = Further Information = General Information Cab type: single Registration number: 69-BKD-8 Technical Data Number of cylinders: 6 Engine capacity: 12,742 cc Unladen weight: 8,245 kg Axle Configuration Tire size: 315/60 R22.5 Brakes: disc brakes Suspension: air suspension Front axle: Max axle load: 8,000 kg; Left tire tread: 40%; Right tire tread: 40% Rear axle: Max axle load: 11,500 kg; Left tire tread: 20%; Right tire tread: 20% Maintenance Periodic technical inspection (APK): valid until 11/2026 Condition Technical condition: very good Visual condition: very good Damages: none

Condition: ready for operation (used), Centre height: 80 mm Spindle bore: 18 mm Iedpfsyv Dy Tjx Abcjtd Spindle mount: MT 3 Swivel range: +110° / -20° Weight: 26 kg

Condition: used, Radicon Worm gear units Type : BU 12 Ratio : 30 : 1 Itsdoyv Dy Hepfx Abcjd

Condition: used, Vibrating chute AVITEQ Length 1200 mm - width 1200 mm Lined with synthetic Incl: control equipment In stock: 1 piece. Iodpfx Aeyv Dyyebcstd

Condition: used, DRUM MOTORS drum motors used large stock of belt width 300-1400 mm Itsdpfx Absyv Dytjced

Condition: used, Joki Drum Motor Type: TM 633 Dim.: Roll Length 1600 mm, Ø 630 mm Power: 30 kW Speed: 3.15 m/sec Weight: 1100 kg Ijdpoyv Dymjfx Abcotd

Condition: used, ELECTROMOTORS type B3 ( new !!! ) : *ABB : 125 kW -- Rpm 1480 -- Axis 80 mm. *HEEMAF : 70 kW -- Rpm 735 -- Axis 90 mm. *HEEMAF : 80 kW -- Rpm 750 -- Axis 90 mm. *ROTOR : 1.8/3.6 kW -- Rpm 720/1430 -- Axis 38 mm. *ROTOR : 5.5 kW -- Rpm 2950 -- Axis 38 mm. *ROTOR : 5.5 kW -- Rpm 1450 -- Axis 38 mm. *ROTOR : 7.5 kW -- Rpm 1455 -- Axis 38 mm. *ROTOR : 30 kW -- Rpm 975 -- Axis 60 mm. *ROTOR : 30 kW -- Rpm 2950 -- Axis 48 mm. *ROTOR : 37 kW -- Rpm 975 -- Axis 65 mm. *ROTOR : 37 kW -- Rpm 1475 -- Axis 60 mm. *ROTOR : 45 kW -- Rpm 1430 -- Axis 60 mm. *SIEMENS : 110 kW – Rpm 728 -- Axis 90 mm. Itodpfxjyv Dyge Abced

Condition: used, AEG / AVITEQ Vibrating tube (only 2 left ) 1 x : length 3000 mm - diameter 500 mm with two pieces vibration motors of each 1,3 kW 1 x : length 5900 mm - diameter 500 mm with two vibration motors of 2.3 kW each Itodpsyv Dyajfx Abcsd

Condition: used, Hazemag Percussion Mill AP 4 complete with Drive unit, Spare rotor + spare parts Capacity : approximately 150 T/h. Power : 35 to 120 kW Opening : 700 x 1000 mm Weight : about 11000 kg Special offer now € 15,000 Ijdpfxoyv Dx Ns Abcotd

Condition: new, functionality: fully functional, Year of construction: 2026, degree of automation: automatic, actuation type: electric, controller manufacturer: SUDA, controller model: Raytools, laser type: fiber laser, laser source manufacturer: Raycus, laser source model: Raycus 6000W, laser wavelength: 1,064 nm, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 16 mm, sheet thickness aluminum (max.): 14 mm, sheet thickness brass (max.): 8 mm, sheet thickness copper (max.): 6 mm, table length: 3,000 mm, table width: 1,500 mm, working length: 3,000 mm, working width: 1,500 mm, input voltage: 400 V, type of input current: three-phase, type of cooling: water, total length: 8,450 mm, total width: 2,950 mm, total height: 2,320 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, FIBER LASER CUTTING MACHINE MTP F-6000 – 6000W High-performance fiber laser cutting machine designed for precise sheet metal processing. The MTP F-6000 combines a robust machine structure with high-quality components, ensuring excellent cutting quality, high working speed, and long service life. The machine is equipped with a 6000W laser source, an auto-focus cutting head, and a CNC control system. It is ideal for production plants, metal processing companies, and industrial workshops. The heat-treated frame structure ensures resistance to deformation and long-term precision. Key features: 6000W laser source Auto-focus cutting head CNC control system Linear guides Helical rack drive Rigid machine construction Automatic lubrication system Water cooling system Protective enclosure Advantages: High efficiency and cutting speed Excellent edge quality Low operating costs Iedpfsyv Dx Asx Abcjtd Easy operation Reliable continuous operation Applications: Steel structures production Sheet metal processing Automotive industry HVAC and ventilation Production of enclosures and metal parts Technical data: Model: MTP F-6000 Working area: 3000 × 1500 mm Laser power: 6000 W Cutting head: Auto Focus Control system: CNC Drive: Servo drives Guides: Linear Transmission: Helical rack Cooling: Water cooling system Lubrication: Automatic Construction: Welded, heat-treated frame Cutting capacity (6000W): Mild steel: up to approx. 25 mm Stainless steel: up to approx. 16 mm Aluminium: up to approx. 14 mm Standard equipment: 6000W laser source Auto-focus cutting head CNC control system Chiller Extraction system Working table Protective enclosure Optional equipment: Air compressor Dust extraction system Exchange table