Jema Vertrieb Inh. Erika Höhn

Condition: used, Year of construction: 2004, Technical details turning diameter 210 mm turning length 700 mm control Okuma OSP-E 100 L total power requirement 35,7 kVA weight of the machine ca. 7,1 t dimensions of the machine ca. 2660 x 2000 x 2330* mm Additional information CNC turning and milling center with C-axis and Y-axis, 2 turrets, and subspindle. The machine is being sold partially overhauled. CNC control: Okuma OSP-E 100 L Maximum turning diameter: 210 mm Swing over bed: 400 mm Distance between spindle noses: 960 mm Main spindle: Spindle bore: 53 mm Speed range: 50 to 6000 rpm Motor power: 11/7.5 kW Subspindle: Spindle nose: JIS A2-6 Speed range: 38 to 5000 rpm Motor power: 11/7.5 kW Z-axis: Travel: 700 / 700 mm (ZA + ZB) Rapid traverse: 40000 mm/min Dsdpezzwmujfx Aptjwb W-axis: Travel: 940 mm Rapid traverse: 40000 mm/min X-axis: Travel: 167 / 192 mm (XA + XB) Rapid traverse: 30000 mm/min Y-axis: Travel: 92 mm (+50/-42 mm) Rapid traverse: 15000 mm/min C-axis: Indexing: 360 x 0.001 deg. Rapid traverse: 400 rpm Disc turret: 2 x 12 stations Tool holder mount: VDI 30 mm Power of driven tools: 4 kW Total connected load: 35.7 kVA Machine weight: 7100 kg Machine dimensions: 2660 x 2000 x 2330 mm* Plus swarf conveyor and bar loader Accessories FMB Turbo 5-42/6200/A bar loader, year of manufacture 2005 Chip conveyor Coolant system Collet chuck for main and subspindle Both turrets equipped with tool holders Machine documentation.

Condition: like new (used), Year of construction: 2016, operating hours: 12,000 h, Spinner TTC300 52 SMMCY Year of manufacture: 2016 Control system: Siemens Sinumerik 840D sl (2-channel operation) Dwodpfx Apezzvd Ejtsb Operating hours: approx. 12,000 hours (counter in the control cabinet shows 12,137.0 hours) If you have any further questions, please do not hesitate to contact me.

Condition: good (used), Year of construction: 2015, Parts shown by hand not come. Dwjdpfx Apszzqnxstob

Condition: ready for operation (used), Year of construction: 1998, functionality: limited functionality, INDEX G200 in good condition. Limited operational capability, as the CPU for the chip conveyor is defective. MAIN SPINDLE Spindle bore, clamping tension mm 60 Spindle diameter at the front bearing mm 100 Spindle nose ISO 702/1 size 5 Chuck diameter mm 140/160 Max. nominal turning diameter mm 200 Max. swing diameter mm 420 Power Pmax 100% kW 7.5/13/20 Power Pmax 40% kW 13.3/22/29 Torque Mdmax 100% Nm 35/61/95 Torque Mdmax 40% Nm 64/105/140 Djdpszzp Dlefx Aptowb Speed nmax min-1 5000 Alignment and switching device (division angle 2.5°) TAILSTOCK Spindle bore, clamping tension mm 60 Spindle diameter at the front bearing mm 100 Spindle nose ISO 702/1 size 4 5 5 1) - 2) Chuck diameter mm 140/160 Power Pmax 100% kW 7.5/13 Power Pmax 40% kW 13.3/22 Torque Mdmax 100% Nm 35/61 Torque Mdmax 40% Nm 64/105 Speed nmax min-1 5000 Min. distance, clamping chuck mm 15 Longitudinal travel mm 445 Rapid traverse m/min 22.5 Alignment and switching device (division angle 2.5°) Expansion stages (main and tailstock) C-axis (resolution 1/1000 degree) Workpiece stop device Coolant line through the working spindle Air blow-out line through the working spindle Speed monitoring system TOOL CARRIER Turret heads (identical for all tool carriers) Number of tools 14 Tool system DIN 69 880 size 25x48 Further information available upon request. Errors and prior sale are excepted. Can be inspected while powered on.

Condition: used, Year of construction: 2021, Citizen Miyano BNJ-51SY6 5 Axis Fixed Headstock Lathe with Fanuc Oi-TF Control, Serial No. DV8166 (2021), Twin Spindle Collet Chucks, Twin Turret, Main Turret 12 Position all Driven, Secondary Turret 8 Position 4 Driven, Main Spindle 50 - 5000rpm, Sub Spindle 50 - 5000rpm, Parts Catcher, Cromar Combi 500 Swarf Conveyor, Imeca Boss 545-E 5 Meter Barfeed, Serial No. 020529GA01. 5,800kg. (2) x Boxes of Driven & Static Tooling for BNJ 51. Country of Origin: Philippines Dodozzb Rdjpfx Aptewb Location: These lots are located in Biggleswade, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: used, Year of construction: 2021, Citizen Miyano BNJ-51SY6 Fixed Headstock Lathe 5 Axis Machine with Fanuc Series Oi - TF CNC Control, Twin Spindle Collet Chucks, Twin Turret, Main Turret 12 Position All Driven, Secondary Turret 8 Position, 4 Driven, Max Spindle 50 - 5000rpm, Sub Spindle 50 - 5000rpm, Max Work Piece Diameter 51mm, Parts Catcher, Cromar Combi 500 Swarf Conveyor. Serial No. DV8125 (2021), Imeca Boss 551E 5 Meter Barfeed, Serial No. 020829GA03. 6200kg. (1) x Box of Driven Tooling for BNJ 51. Country of Origin: Philippines Location: These lots are located in Biggleswade, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. Dedpfx Apozzb Hfotewb

Condition: excellent (used), Year of construction: 2022, operating hours: 1,400 h, functionality: fully functional, turning length: 1,350 mm, turning diameter: 550 mm, spindle motor power: 48 W, spindle speed (max.): 3,000 rpm, spindle bore: 95 mm, travel distance X-axis: 380 mm, travel distance Y-axis: 140 mm, travel distance Z-axis: 1,350 mm, spindle nose: A2-11, 12-tool turret Spindle speed: 12,000 rpm Tool presetter arm Chip conveyor Dedpfx Aozzb Amjptjwb High-pressure pump: 15 bar Autoblok SLU3.1 steady rest Chuck: Ø315 Bar feeder interface Tool holder set

Condition: used, Year of construction: 2014, Miyano ABX-64THY2 Twin Spindle Fixed Head Stock Lathe with Fanuc Series 31i Model B CNC Control, Triple Turret all 12 Position, Hainback Collet Chucks, 10 Axis Machine, Driven Tooling Capability, Spindle 1 - 40 - 4000rpm, Spindle 2 - 50 - 5000rpm, Max Working Diameter 64mm, IEMCA Master 21 3m Bar Feed, LNS Swarf Conveyor. S/No. CP640028 (2014) 11.350kg. (2) X Right Angle Driven Tooling for Miyano ABX64, (2) x Straight Driven Tooling for Miyano ABX64. Country of Origin: Japan Dwsdpfozzbxbex Aptjb Location: These lots are located in Biggleswade, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: good (used), Year of construction: 2016, operating hours: 7,500 h, functionality: fully functional, turning length: 760 mm, turning diameter over cross slide: 406 mm, spindle motor power: 18 W, spindle speed (max.): 5,000 rpm, spindle bore: 76 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 105 mm, travel distance Z-axis: 830 mm, Equipment: documentation/manual, Automatic measuring arm Chip conveyor Parts collector Set of tool holders, including 2 motorized ones Presetting tools Chip conveyor Dwsdpfxezzap Ee Aptsb Parts collector Set of tool holders, including 2 motorized ones

Condition: good (used), Year of construction: 2017, Max. turning diameter 366 mm Max. turning length 510 mm Bar capacity Ø 65 mm Travel ranges X / Y / Z 260 / 100 / 590 mm Main spindle 5,000 rpm Counter spindle 6,000 rpm Driven tools 10,000 rpm · 29 Nm Turret 12 stations, BMT Controlled axes X, Y, Z, C, B Dwsdpfxjzy U Nwo Aptsb Machine weight 5,500 kg Connection current max. 115 A - Y-axis milling off-center, complete machining in a single setup - Counter spindle with synchronized transfer – machining the back side without re-clamping - Built-in motor turret (BMT) drive in the turret, stiffer and more thermally stable than VDI systems - Tool measuring probe for both spindles - Bar loader LNS Quick Load Servo 65 for bars up to Ø 65 mm, unmanned series production - Parts catcher and parts conveyor for gentle parts removal - Chip conveyor, high-pressure coolant supply - CELOS with ERGOline 21″ touch control panel Machine running time approx. 14,100 hours Program running time approx. 9,900 hours Machine price excluding shown accessories (extensive accessories can be purchased separately) Errors and prior sale excepted. The machine can be inspected under power with short notice.

Condition: good (used), Year of construction: 2001, functionality: fully functional, turning length: 1,020 mm, turning diameter over cross slide: 580 mm, spindle motor power: 22,000 W, travel distance X-axis: 565 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 1,080 mm, rotational speed (max.): 4,500 rpm, overall weight: 12,000 kg, For Sale: Mori Seiki MT2000SZ Multi-Axis Turn-Mill Center For sale: A highly versatile and efficient Mori Seiki MT2000SZ multi-axis CNC turn-mill center for demanding industrial production. This machine enables complete machining of complex components in a single setup using its main spindle, sub-spindle, B-axis milling spindle, and lower turret. General Information Manufacturer: Mori Seiki Model: MT2000SZ Control Unit: MAPPS / MSG-501 (Fanuc) Year of Manufacture: 2001 Technical Specifications Dwedpfx Aozy Ntkjptob Capacity & Travel: Max. Turning Diameter: 550 mm Max. Turning Length: 1,020 mm X-axis Travel: 565 mm Y-axis Travel: ±80 mm Z-axis Travel: 1,077 mm B-axis (Milling Spindle): ±120° (0.001° indexing) Main Spindle & Sub-Spindle: Main Spindle Speed / Power: 4,500–6,000 rpm / 22 kW / Bar Capacity Ø 65–73 mm Sub-Spindle Speed / Power: 4,500–6,000 rpm / 15 kW C-axis: Both main and sub-spindle (0.001°) Milling Spindle (Upper Head) & Tool Magazine: Milling Spindle Speed: 10,000 rpm Milling Spindle Power: 7.5 kW Tool Magazine (ATC): 60 positions Lower Turret: Tool Stations: 12-position turret (live tooling) Live Tooling Speed: 4,000–6,000 rpm Dimensions & Weight: Dimensions (L x W x H): approx. 3,830 mm x 2,881 mm x 2,650 mm Machine Weight: approx. 12,000 kg Features & Equipment Multi-Axis Configuration: Main spindle, sub-spindle, B-axis milling head, and lower turret Upper Head (Milling Spindle): Full B-axis for driven tools with Automatic Tool Changer (ATC) Lower Turret: Independent lower turret for flexible and high-efficiency simultaneous machining Included Accessories: Plenty of tools, chuck jaws, and user manuals, etc.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, turning length: 600 mm, turning diameter: 370 mm, Machine type: CNC turning center Manufacturer: Okuma Type: LU300-2ST Year of manufacture: 2005 Control: OSP-E100L Delivery time: in stock Machine equipment - Parts conveyor belt and parts collection tray – workpiece chute with removal transport belt incl. electrical kit - 2 turret heads with VDI40 (12 + 8 stations) - Hydraulic cylinder for hollow spindle – bore in draw tube 52mm - Extension kit “D” – Kit one touch IGF-D - Open/close chuck with spindle running via M-code - Reinforced coolant pump 8 bar - Coolant can be switched to A and B turrets via M-function - Interface for connecting bar feeder - Chip conveyor Technical details - Swing diameter over bed: 530mm - Swing diameter over carriage: 380mm - Distance between centers: 600mm - Max. turning diameter: 370mm - Max. turning length: 600mm - Travel X-axis: upper 260mm / lower 140mm - Travel Z-axis: upper 640mm / lower 615mm - Rapid traverse X-axis: 20,000 mm/min Dsdezy Iq Ujpfx Aptowb - Rapid traverse Z-axis: 25,000 mm/min - Spindle speed: 45 ~ 5,000 rpm - Spindle bore diameter: 62mm - 2 tool turrets: upper 12 stations, lower 8 stations - Spindle power: 22/15 kW - Machine dimensions LxB: approx. 2950 x 2050mm - Machine height: approx. 2010mm - Weight: approx. 6500 kg Optional - Transport organization and execution - Machine delivery and installation - Machine commissioning

Condition: ready for operation (used), Year of construction: 2020, operating hours: 7,597 h, functionality: fully functional, machine/vehicle number: NL257200651, turning diameter: 366 mm, spindle speed (max.): 4,000 rpm, controller model: Mitsubishi 730UM CELOS, working length: 700 mm, number of slots in tool magazine: 12, TECHNICAL DETAILS Maximum machining length: approx. 700 mm Maximum turning diameter: 366 mm Workpiece length with tailstock: max. 728 mm Spindle speed: max. 4,000 rpm Tool turret: 12-position BMT60 star turret Tool drive: 40 / 14 Nm Speed of driven tools: max. 10,000 rpm Overhang length of driven tools: 100 mm Chuck: 10" hollow chuck, Ø 254 mm Chuck cylinder: hollow chuck cylinder BB210A821 Tailstock: NC tailstock Tailstock taper: MK 5 MACHINE DETAILS Coolant type: water-miscible coolant / emulsion Coolant pressure: 5 bar Extraction connection: Ø 150 mm Mains voltage: 380 V Frequency: 50 Hz Transformer power: 45 kVA Phases: 3 phases Isolation transformer: 400 V ± 5 % Current: 65 A Control system: Mitsubishi 730UM CELOS User interface: CELOS with ERGOline touch panel Machine operating time: 7,597 h Program runtime: 2,138 h Last maintenance: April 2024 Weight: 5,800 kg Dedpjzy Hx Defx Aptjwb EQUIPMENT DMG MORI M730UM control system with CELOS ERGOline touch panel 12-position BMT60 star turret with driven tools 10" hollow chuck, Ø 254 mm Hollow chuck cylinder BB210A821 Double foot switch with protective cover NC tailstock with MK-5 mount Oil-air cooler for circulating spindle coolant Hinged belt chip conveyor High-pressure coolant system, 5 bar Oil mist separator AFS 1100 including interface Manual, swiveling tool pre-setter SCHNEIDER transformer 45 kVA Technology cycle "Alternating Speed" Further technical data can be found in the document attached!

Condition: good (used), Year of construction: 2007, The Emco Maxxturn 45 SM is in good condition and is still in use daily for production on the Emco Maxxturn 45. Primarily, parts made of plastic are manufactured on this machine. Spindle hours: only 23,848 hours. Approximately 6 months ago, the machine control panel with display and the air conditioning unit were replaced. Last maintenance performed in 04/2026; geometry was checked. The machine can still be inspected during production until week 39 of 2026. Technical data: Control: Siemens 840 D. Main spindle: Speed 6,300 rpm. Counter spindle 6,300 rpm. Spindle bore max. 45 mm. 2 x C-axis, 0.001°. High-pressure coolant system at the tool turret. Chip flushing for the counter spindle. Sauter tool turret with 12 stations, VDI25. All stations for driven tools. Speed range: 6,000 rpm. Travel in X/Z axis 160/510. Dwsdpfjzyyp Asx Aptjb Accessories: Chip conveyor Knoll. High-pressure coolant pump. Finished parts collector. Interface for bar feeder. New control cabinet air conditioning unit. LED indicator light, 4 wedge shoes, machine documentation. Machine keyboard with cover. 8 rigid tool holders VDI 25. 2 x axial driven tools. 1 x radial driven tool. The tools and clamping devices shown in the picture are not included in the sale.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 510424, Equipment: documentation/manual, Machine in very good condition. Y and B axes available, with a subspindle. It is connected to power and can be inspected at any time. The machine is 100% complete, with numerous driven tool holders and spindle diameter reducers. 2 x HAINBUCH 65 BZI. Dwsdjzyypcjpfx Aptjb Parts conveyor, chips conveyor, and Sameca bar feeder available. 2 x Spindle bore 60 mm. Tool holders VDI25.

Condition: used, Year of construction: 1995, turning diameter 510 mm turning length 1000 mm Dsdpfjzyvcrox Aptowb control MAZATROL T PLUS total power requirement 22-26 kW weight of the machine ca. 6,5 t

Condition: used, Year of construction: 2005, turning diameter 170 mm Max. Turning length 120 mm bar capacity 52 mm control FANUC MSX-501 travel -x1 axis 140 mm travel -x2 axis 140 mm travel -z1 axis 450 mm travel -z2 axis 410 mm travel -y axis +/- 40 mm travel - b axis (spindle 2) 525 mm speeds station 1 60 - 6000 U/min spindle bore 1 62 mm speeds station 2 60 - 6000 U/min spindle bore 2 62 mm driven tools turning speeds 6.000 U/min CNC Turning- and Milling Center | MORI SEIKI - ZT 1500 Y equipped with 2 turrets for driven tools, Y-axis and bar loader. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Dsdpfxozyvb Ij Aptjwb #Tags: ZT1500Y | ZT-1500 Y | ZT 1500Y | ZT-1500-Y

Condition: used, Year of construction: 2004, operating hours: 67,991 h, spindle bore: 92 mm, spindle speed (max.): 4,000 rpm, rotational speed (max.): 4,000 rpm, bar passage: 92 mm, CNC universal lathe Gildemeister CTX 520 linear V3 | Year of manufacture: 2004 | C-axis & driven tools For sale is a CNC universal lathe from the manufacturer Gildemeister (DMG), model CTX 520 linear V3. This machine, manufactured in 2004, is equipped for complete machining and features a C-axis, driven tools, and a tailstock. General machine data * Manufacturer: Gildemeister * Model: CTX 520 linear V3 * Year of manufacture: 2004 * Serial number: 02280000301 * Operating hours: 67,991 h * Spindle hours: 16,244 h Control system * Type: SIEMENS 840D powerline Djdpfszyp Alox Aptewb * User interface: ShopTurn Spindle & clamping devices * Max. speed: 4,000 rpm * Hydraulic collet chuck * Draw tube inner diameter: max. 92.5 mm * Clamping force: 100 kN (at P max. 80 bar) * Partial collet chuck Equipment * C-axis * Tool drive for driven tools * Sauter disc turret * Tailstock * Chip conveyor From an insolvency proceeding, sale via free sale. Offer deadline: September 30, 2026, 6:00 PM. Package price possible for multiple machines from this proceeding. Inspection: September 16, 2026, 10:00 AM – 12:00 PM, Fraunhoferstraße 10–12, 04178 Leipzig. Collection: October 6, 2026, 9:00 AM – 4:00 PM. Further information and offer submission can be found on our IKV Fester GmbH homepage under Auctions.

Condition: not inspected (used), Year of construction: 1990, functionality: limited functionality, turning length: 600 mm, spindle speed (min.): 4,000 rpm, spindle bore: 65 mm, type of input current: three-phase, total height: 270 mm, total length: 5,000 mm, total width: 220 mm, overall weight: 4,000 kg, No. 202 Monforts RNC 4 without tailstock Machine No. 13772 Serial No. 11914 Control: GE Fanuc Tool turret: SAUTER turret ø40 • Type 0.5.801.020; • ID No. 070615; • Commercial No. 14-89.44436/7 without chuck without tools Accessories: Chip conveyor KS Kabelschlepp Year of manufacture: 1990 Item No. 3046 ----- 201 Monforts RNC 4 with tailstock Machine No. 137xx Serial No. 119xx Control: GE Fanuc Monforts Control System F SAUTER turret ø 40mm • Type 0.5.801.020; • ID No. 070615; • Commercial No. 14-89.44436/7 without chuck, without tools Accessories: with tailstock Chip conveyor KS Kabelschlepp Year of manufacture: 1990; Item No. 3254 ----- Technical data: RNC 4, RNC series Control: Fanuc 10 T Monforts Control F Max. turning length 600 mm / 1000mm Machine Ø over bed 420 mm Max. swing diameter over cross slide 280 mm Tool turret stations 12 VDI Spindle flange according to DIN 55026 A 6/A 8 Spindle Ø in front bearing 130 mm Material passage through the spindle 65 mm Speed range basic version 5-4000 rpm Tool turret, 12 tool positions: Total power requirement: 22 kW Machine weight approx.: 4 t Djdpezypb Ujfx Aptewb Space requirement approx.: m The machines have not been in production for several years and were intended to be used as a source of spare parts. The batteries for the control system were replaced regularly. Both machines will be sold as a package. The machine is still connected to the power supply, and the control system starts up without any problems.

Condition: good (used), Year of construction: 2012, functionality: fully functional, DOOSAN PUMA 2600S – CNC turning center with subspindle, FANUC, year 2012 We offer for sale a DOOSAN PUMA 2600S CNC turning center with subspindle, equipped with a reliable DOOSAN-FANUC i Series control system. The machine is in operation and can be demonstrated and tested upon request. Dsdszyn Hcspfx Aptowb Technical specifications: Manufacturer: Doosan Infracore Model: PUMA 2600S Year of manufacture: 09/2012 Serial number: ML0218-000034 CNC control: DOOSAN-FANUC i Series Configuration: main spindle + subspindle Max. turning diameter: approx. 376 mm Max. turning length: approx. 760 mm Main spindle chuck: approx. 10" Bar capacity through main spindle: approx. 76 mm Max. main spindle speed: approx. 3,500 rpm Main spindle power: approx. 18.5 / 22 kW X-axis travel: approx. 260 mm Z-axis travel: approx. 830 mm Turret: 12 positions Automatic subspindle for complete part machining Chip conveyor Rated machine power: 40.7 kVA Power supply: 200/220 V, 3 phases, 50/60 Hz Machine weight: 5,400 kg Robust CNC turning center suitable for both series and single-piece production. Thanks to the subspindle, it enables machining of the part from both sides without the need for manual switching between individual operations. The machine is currently powered on and can be demonstrated in operation.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Turning / milling center with counter spindle with 10 CNC axes (X1, X2, Z1, Z2, Y1, Y2, B1, B2, C1, C2) Control: FANUC 31:iA Main Spindle Power: 15/11 kW bar material dia.: 51 mm spindle revolution: 5.000 min-1 Counter Spindle Power: 11/7,5 kW bar material dia.: 51 mm spindle revolution: 5.000 min-1 Turning and milling spindle Power: 7,5/3,7 kW Turning and milling spindle speed: 12.000 min-1 max. rotation length turret bottom: 1.005 mm Slide cross X1 / X2 / Z1 / Z2 / B2: 455 / 222,5 /1.090 / 1.005 / 1.008 mm Slide cross Y1 / Y2: +/- 70 / +20, -50 mm Swivel range B1 axis: +/- 95 ° Linear rack magazine incl. support robot Dwjdpezynypjfx Aptjb CNC support steady rest Coolant cyclone filter system incl. 2 pcs. coolant pumping spindle oil cooler

Condition: good (used), Year of construction: 2002, machine/vehicle number: 04780000061, spindle motor power: 45 W, travel distance X-axis: 605 mm, travel distance Y-axis: 210 mm, travel distance Z-axis: 1,470 mm, overall weight: 22,000 kg, Gildemeister TWIN500 Djdpezymvisfx Aptewb Siemens 840 D Main spindle: 45 kW, 3200 rpm, swing: 610 mm, spindle distance: 1850 mm Counter spindle: 45 kW, 320 rpm Travel ranges: X-axis: 605 mm Y-axis: 210 mm B-axis: 240° Z-axis: 1470 mm Turning/milling spindle: HSK 63, 12000 rpm X-axis: 267 mm Z-axis: 1440 mm Tool magazine: 80 positions Machine Condition : Functional, good.

Condition: used, operating hours: 11,655 h, functionality: fully functional, spindle bore: 65 mm, overall weight: 8,500 kg, spindle diameter: 65 mm, Well-maintained WT150 lathe, including an LNS Quick Load bar loader, fixed chucks, powered chucks, and Hainbuch collets. Djdpszylw Eofx Aptowb

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, turning length: 1,000 mm, turning diameter over cross slide: 680 mm, turning diameter: 465 mm, spindle speed (max.): 3,500 rpm, spindle bore: 76 mm, travel distance X-axis: 300 mm, travel distance Z-axis: 1,050 mm, rotational speed (max.): 3,500 rpm, type of input current: three-phase, total height: 2,120 mm, total length: 4,865 mm, total width: 1,770 mm, spindle nose: FL 220 h5, overall weight: 7,500 kg, Equipment: documentation/manual, rotational speed infinitely variable, The Gildemeister CTX 510 is a rather heavy, industrial CNC turning machine. It is a machine that is particularly interesting if you want to machine a lot of material and are not just doing light turning operations. We acquired this machine in working condition from the first owner and it can also be inspected in working condition! Additional options & accessories: - Full pallet with static VDI-40 tool holders. - Chip conveyor - Marposs measuring arm Dwsdpfx Aezyai Njptsb - Collet chuck 173E (Quadro NC - Marquar) - Adapter sleeve for 185E collet chuck - Coolant gun - High-pressure coolant pump - Chip conveyor - Double foot pedal - Original Gildemeister documentation. Weight & dimensions: 7,500 kg 4865 x 1770 x 2120 mm (L x W x H incl. chip conveyor)

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, SPINNER TC300-52 SMCY – CNC turning center, manufactured in 2012 including bar feeder Spinner Servo-Load 80-1500 and tool package Availability: expected November/December 2026, as soon as the replacement machine is delivered. The machine is currently in continuous production and operating at full capacity – inspections while powered and in operation are possible at any time by appointment. It has been running continuously in a single-shift operation. Operating hours: 25,000 hours General - Manufacturer: SPINNER Werkzeugmaschinenfabrik GmbH, Sauerlach - Type: TC30052SMCY | Machine no. AZ0145 | Manufactured in 2012 - Control: Siemens Sinumerik 840D sl, ShopTurn - Connection: 3/PE ~ 400 V, 50/60 Hz, I_B 34 A, I_N 35 A Dodpfx Apozx Subetewb - Weight approx. 3,700 kg | Dimensions approx. 2.0 × 1.6 × 2.0 m Working area - Max. swing diameter approx. 300 mm - Max. turning diameter approx. 250 mm - Max. turning length approx. 400 mm - Travels X 180 / Y Z approx. 500 mm - Rapid traverse X/Z 15 / 24 m/min Turret 1 - Max. 5,000 min⁻¹ | 15 kW (S1) | 95 Nm (S1) - Bar capacity 52 mm | C-axis Turret 2 (counter-spindle) - Max. 7,000 min⁻¹ | 6 kW | 38 Nm | C-axis Tool turret - 12 tools, VDI 25 - 12 rotating tool stations, max. 6,000 min⁻¹ - Power 5.9 / 2.2 kW (S6 40 % / S1) - Torque 14.75 / 9.5 Nm (S6 40 % / S1) Operating materials - Coolant tank approx. 150 l | Hydraulic tank approx. 11 l | Central lubrication approx. 2–3 l Bar feeder SPINNER Servo-Load 80-1500 - Original Spinner, factory-matched to the machine - Bar length up to 1,500 mm, diameter up to 52 mm - Servo-electric, separate control panel, including guide tubes Scope of supply - Counter-spindle, C-axis, Y-axis, driven tools - Bar feeder Servo-Load 80-1500 - Chip conveyor, chip tray, coolant system - Tool cabinet with driven and static tool holders, drilling bar holders, collets - Complete documentation Pictures and a video of the tools, documentation, and scope of supply will follow in the next few days. Terms and conditions Sale of a used machine from ongoing production, as is, with no warranty of any kind. Price net ex works plus VAT. Dismantling and transport can be arranged upon request. Technical data according to the manufacturer's original documentation. Equipment and condition without guarantee, to be checked on the machine before purchase. If you have any questions or would like to arrange an inspection, please do not hesitate to contact me at any time.