Used milling machines - univ.NC/CNC over 1000mm X-axis travel for sale (33)

Condition: used, Year of construction: 2008, functionality: limited functionality, machine/vehicle number: 2315, travel distance X-axis: 2,050 mm, travel distance Y-axis: 3,050 mm, travel distance Z-axis: 150 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, spindle speed (max.): 24,000 rpm, spindle speed (min.): 6,000 rpm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, total height: 1,800 mm, total width: 3,000 mm, total length: 4,000 mm, type of input current: three-phase, overall weight: 2,075 kg, input voltage: 380 V, input frequency: 50 Hz, We are offering this used Digima RJ2030 ATC CNC milling machine, year of manufacture 2008. Additional information is available if needed, please contact us. Gtedpjx Tqghsfx Ah Hst

Condition: good (used), Year of construction: 1988, travel distance X-axis: 1,000 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, 5-axis machine Feed rate stepless: 2-4000 Total power requirement: 20 kW Machine weight approx.: 7 t Gedjx T Atyspfx Ah Hott Space requirement approx.: 7 linear meters

Condition: good (used), The machine is in good technical condition. Maximum spindle torque: 1200 Nm Maximum feed force in X, Y, Z axes: 25,000 N Gsdpfx Aox Ai Igoh Hjtt Maximum workpiece weight: 10,500 kg Total table area: 1000 x 5000 mm Number of T-slots: 7/140 mm Width of central slot: 22H7 Longitudinal travel (X-axis): 5000 mm Cross travel (Y-axis): 1000 mm Vertical travel (Z-axis): 1400 mm Minimum distance from horizontal spindle axis to table clamping surface: 150 mm Minimum distance from vertical spindle face to table clamping surface: 125 mm Spindle taper: ISO 50 Spindle diameter at front bearing: 100 mm Tool taper: ČSN 22 0434 (DIN 69871 - A 50) Drawbar force of clamping mechanism: 16,100 N Swivel range of horizontal spindle: bi-directional +177.5° to -180° Swivel range of vertical spindle: bi-directional +177.5° to -180° Usable power of main drive motor: 22 kW Spindle speed range: 11 to 2500 rpm Number of speed steps: stepless Feed range: 1 to 5000 mm/min Rapid traverse in Y and Z axes: 10 m/min Rapid traverse in X axis: 15 m/min Maximum approach speed to reference point: 3000 mm/min Spindle head rotation about machine cross axis: +177.5°, ±180° The machine has undergone partial general overhaul (GO).

Condition: ready for operation (used), Year of construction: 2011, operating hours: 12,214 h, machine/vehicle number: 111146, the machine has an IKZ 22 bar. Chip conveyor, handwheel, Heidenheim control 530 machine is sold without tools without vice technical condition very good, can be inspected at any time without electricity. Gtedpfou A Azusx Ah Hst

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, 1 used CNC bed type milling machine with Heidenhain control. Gsdpfx Ahjwxxzqe Hett Additionally, rotary table The rotary table has a diameter of 1200 mm. €220,000 – in 2012/2013 rebuilt with a new Rexroth rotary table, fully installed as a C axis. Swivel head is available. A wide range of tools as well as a 3D touch probe are included.

Condition: excellent (used), Model: F30 Gtjdpfx Ahowif Rmj Hot Table Area: 1625 x 800mm Fully Rotational Through Control Control: Heidenhain 426 ‘X’ Axis: 1800mm ‘Y’ Axis: 1150mm ‘Z’ Axis: 1370mm Spindle Taper: 50 INT Spindle Speeds: To 1800 RPM

Condition: used, Year of construction: 2015, operating hours: 1,603 h, functionality: fully functional, machine/vehicle number: MV0062-000372, travel distance X-axis: 2,160 mm, travel distance Y-axis: 762 mm, travel distance Z-axis: 650 mm, type of input current: AC, overall weight: 15,000 kg, Equipment: USB port, Doosan DNM 750 II – CNC Machining Center – Excellent Condition – Available in 2 Weeks The machine is currently running in daily production, accumulating hours, and can be demonstrated live during inspection. It has been professionally maintained and shows no mechanical or electronic issues. Gjdpfxjx Ar Dqs Ah Hott Machine Condition - Fully functional, operates flawlessly - Clean and well-maintained - No vibrations, spindle issues, or alarm errors - Ready for immediate demonstration - Delivery possible in approx. 2 weeks Important Notes - Sold without accessories (no tool holders or workholding included) - All documents and technical information available on request - Ideal for machining steel, aluminum, and engineering plastics Additional Information - The machine can be inspected under power - Cutting test available on request - Loading and transport can be arranged at buyer’s cost

Condition: good (used), Year of construction: 2003, Vertical milling machine, UNITECH, type: FSS 315-S7, year of manufacture 2003 with 3-axis digital display ACU-RITE Hydraulic tool clamping, synchronous milling device, coolant device. Gtedpfev A Trasx Ah Het Travel paths: X 1000 mm Y 355 mm Z505 mm Table: 315 mm X 1250 mm. Spindle mount: ISO 50 Spindle speeds: 28 - 2240 rpm Machine in good condition, machine documentation available. For further data, see data sheets.

Condition: repair required (used), feed length X-axis: 1,500 mm, feed length Y-axis: 600 mm, feed length Z-axis: 450 mm, Manufacturer: Reckermann Tip: Beta 10 Movements: X: 1500 mm Y: 600 mm Z: 450 mm Control: Sinumerik 810M Gtedpfx Ahouhnznj Hjt Y-axis does not move, it does not stand on a reference point!

Condition: ready for operation (used), Year of construction: 2012, operating hours: 12,958 h, machine/vehicle number: 121113, used milling machine IKZ 22 bar chip conveyor handwheel technical condition very good. The machine is sold without tools and without accessories under power Inspection possible at any time. Gtedpfou A A Dcex Ah Hot

Condition: good (used), Year of construction: 2013, operating hours: 4,951 h, functionality: fully functional, machine/vehicle number: 1002823, travel distance X-axis: 1,020 mm, travel distance Y-axis: 830 mm, travel distance Z-axis: 240 mm, total height: 2,000 mm, total width: 2,000 mm, total length: 3,500 mm, table width: 1,000 mm, table length: 1,400 mm, table height: 960 mm, table load: 200 kg, overall weight: 2,000 kg, operating hours of spindle: 2,803 h, DATRON M 10 PRO A CNC Milling Machine - Operating voltage: 3 x 400 V - Frequency: 50 Hz - Rated current: 16 A - Operating pressure: 7 - 10 bar - X-axis travel: 1020 mm - Y-axis travel: 830 mm - Z-axis travel: 240 mm - X and Y travel limited by tool changer: 1020/720 mm - Gantry clearance: 200 mm - Bushing distance: 100/100 - Table cut-out width/depth: 630/348 mm - Table width: 1000 mm - Table depth: 1400 mm - Table height: 960 mm - Max. table load: 200 kg - Distance to outer edge: 175/148 mm - Recorded machine operating hours: 4951 h - Spindle running time: 2803 h The machine is equipped with a tool presetting device from manufacturer SCHUNK, type TRIBOS. Includes various holders and a vacuum pump. Gtjdpfoxxwxfsx Ah Hst FCA D-01237 Dresden – loaded on truck

Condition: new, The VECTOR 1400 M SI is a robust Vertical Machining Center from KNUTH, specifically designed for the efficient machining of large and heavy workpieces. This C-Frame Vertical CNC Center features a high-quality Meehanite casting base that offers exceptional stability and high precision, even in multi-shift operations. Key attributes include a travel capacity of 1,400 mm in the X-axis and 720 mm in the Y-axis, ensuring flexibility for diverse applications. With a state-of-the-art spindle supported by multiple bearings, the VECTOR minimizes vibrations and ensures optimal machining quality thanks to its 30-bar coolant system. The machine is loaded with standard equipment such as a Siemens 828D control, a 24-station tool changer, and an automatic central lubrication system, all designed to enhance productivity. Whether you’re considering automation options or specific customizations, the VECTOR series allows tailored solutions to meet your machining needs. For exceptional performance in the realm of Vertical Machining Centers, request a quote today and discover the capabilities of the VECTOR 1400 M SI. Gedpoww T Trofx Ah Hott

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: 56600, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,600 mm, spindle speed (max.): 3,000 rpm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, table width: 1,000 mm, table length: 4,000 mm, table load: 10,000 kg, Table dimensions: 4000x1000 mm Number of T-slots: 7 T-slot dimensions: 22 mm Max table load: 10,000 kg X-axis travel: 4000 mm Y-axis travel: 1200 mm Z-axis travel: 1600 mm Head type: Automatic, 360,000 positions 0.001° (2 bodies) Speed range: 35-3000 rpm Main motor power: 32 kW Working feed: 15,000 mm/min Rapid traverse (X,Y,Z): 30,000 mm/min Year: 2011 Equipped with: Gsdpjx Iu Ryefx Ah Hjtt CNC control: HEIDENHAIN iTNC 530 Electronic handwheel: HR 420 Tool changer: 30 tools Workpiece probe: HEXAGON Coolant: Internal Chip conveyor: Yes Paper filter tank: Yes

Year of construction: 1988, condition: good (used), CNC universal console milling machine Fabr.KLOPP Type:FWS15 Bj.88 CNC contouring control Heidenhain TNC 155. Travel:X1170mm Y:420mm Z:420mm Aufspanntisch:1500X400mm Spindle mounting:SK50 Spindle power:15KW Spindle speed:35-3550rpm Counter bearing for horizontal milling, cooling device, spittoon, Gtodsbu Em Ajpfx Ah Het Various tool holders, Complete machine documentation. Machine immediately ready for use Workshop tested. New parameters and batteries on 20.08.2020 Installed. Good general condition. Machine can be run under current.

Condition: used, CNC 5-Axis HMC – Horizontal Machining Center, Milling Center, Manufacturing Center Manufacturer: LICON Model: Liflex 1266 PC B1 Year of construction: 2016, Commissioned: 2017 Equipped with SIEMENS 840D SL (Solution Line) CNC path control, with 5 simultaneously controlled axes Travel paths X: 1200 mm, Y: 660 mm, Z: 650 mm A-axis as swivel bridge +/– 135° (270°) B-axis 360° continuous Axis acceleration X + Y-axis 6 m/s² Axis acceleration Z-axis 9 m/s² Feed force X + Y-axis 7500 N Feed force Z-axis 10000 N Positioning tolerance (X/Y/Z) 0.008 mm A-axis swivel speed 180° rotation in 4 sec. Interference diameter on the swivel bridge max. 1400 mm Transport load on the swivel bridge max. 700 kg Tool holder HSK 63 Spindle speed max. 12,000 rpm, stepless Spindle power 37kW at 40% duty cycle Spindle torque at 40% duty cycle 85 Nm Maximum spindle torque 100 Nm Tool change time (chip-to-chip) approx. 3.7 sec. Tool diameter with adjacent slots occupied Ø 140 mm Tool diameter with adjacent slots free Ø 250 mm Maximum tool length 400 mm Gtsdpfx Ast Ac Efsh Hot Maximum tool weight 20 kg Power supply 400 Volt, 50 Hz Connected load 80 kVA Compressed air connection 5-8 bar - LIFLEX MSP 80/63/85/12,000 motor spindle (output 37kW/40% duty cycle) with liquid cooling and recooling unit - 2-axis rotary tilting table LICON as B- and C-axis, with hydraulic axis clamping - Zero-point clamping system on the swivel axis turntable - Dual pallet changer, without pallets (these need to be newly sourced) - Media transfer of 5 single-action pressure lines for oil or air, for workpiece clamping on the pallets Hydraulic functions from 30-150 bar, with pressure monitoring (controllable via M-functions) - Tool changer with 30 tool positions, disc turret type - Machine designed for dry machining with minimal quantity lubrication (MQL) system - MQL-TSC, internal MQL lubrication supply through the spindle - Scraper belt chip conveyor, discharge height 1150 mm - Licon ECO-Mode (energy-efficient aggregate operation) - Direct linear measurement system on all axes - Operating hours (control voltage on) ≈ 7,500 h Space required for operation L x W x H 9,000 x 5,000 x 3,800 mm Space required for transport L x W x H 6,100 x 4,400 x 3,600 mm Base machine weight approx. 21 tons Total weight: approx. 24 tons Very good condition

Condition: used, Year of construction: 2018, x-travel 3200 / 2630 mm y-travel 750 mm z-travel 695 / 800 mm Control Heidenhain TNC 640 swivelling range -98 bis 98 Grad rotary table dia. 750 mm total power requirement 29 kW weight of the machine ca. 16 t Hedelius traveling column machining center Tiltenta 7 Magnum with continuously swiveling main spindle, 5-axis CNC control Heidenhain TNC 640, 22.0 kW/117 Nm main spindle drive 50-12000 rpm, 50-fold tool magazine and NC rotary table integrated into the fixed machine table. Machine equipment: T7M-3200, operating mode 3 -Pressure booster pump 50 bar -Heidenhain TNC 640-T series -Spindle speed 12000 rpm/29.0 kW -Extended swivel range TNC/T -HR 510 handheld control unit -SK40/190 standby magazine Gjdpowfqqkefx Ah Hott -Cone cleaning station -900 l slant bed coolant system -25 bar internal coolant supply -Slant bed coolant system prefilter -Electrostatic exhaust air filters T / 2x1300 -Compressed air nozzle on spindle head -Internal compressed air supply -Blow-off guns -Rinsing guns -Infrared receiver M&H 91.40 -3D infrared measuring probe M & H 25.50 -Toolsetter M&H 35.70 -Workspace partition T7 with slider Control on: 33163:56:22 Machine on: 24185:07:21 Program run: 16784:12:57 Spindle: 11751.13.08

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 8105, Universal milling machine 1300 KOMBI Gedpfsx Ezaiox Ah Hstt

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 142333097, travel distance X-axis: 1,600 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 710 mm, rotational speed (max.): 6,000 rpm, table load: 2,000 kg, TECHNICAL DETAILS Travel X-axis: 1,600 mm Travel Y-axis: 800 mm Travel Z-axis: 710 mm Gtjdpfx Ajx Ap S Eeh Het Max. spindle speed: 6,000 rpm Table dimensions (L x W): 1,800 x 800 mm Table load capacity: 2,000 kg Spindle taper: ISO 50 MACHINE DETAILS Machine dimensions: 2.73 x 4.31 x 3.03 m Length with chip conveyor: 4.31 + 1.03 m Depth with control system: 2.73 + 0.40 m Depth with coolant tank: 2.73 + 1.80 m Control unit: Heidenhain iTNC 530 Note: The machine can still be inspected under power until week 50.

Condition: excellent (used), Year of construction: 2018, Clausing Colchester 4VSQ MLLPWR CNC Turret Milling Machine Acu-rite Mill Power 3 Axis CNC Control Table Size 1370 x 254mm Travels: X – 1050mm Y – 390mm Z (Quill) – 115mm Gtedpfx Aex Af I Ajh Hjt Z (Knee) – 355mm Vari Speed Head Spindle Taper IS040 Spindle Speeds Low 60 – 500rpm Spindle Speeds High 55 – 4300rpm Weight: 1850Kgs 3 Phase Electrics Manufactured: 2018 Complete with: Vice Interlocking Table Guards Air Draw Bar Tooling Packaged (ISO40) Power Rise and Fall to Knee Auto Lube Worklight Coolant & Swarf Guards / Tray *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79028 Machine Serial Number: TC0015 Cost: £12,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Manufacturer: SHW Machine tools Type: UF 21 / UF 31 Travel distances X,Y, Z: 1000, 700,625mm Control: -Machine 1: Heidenhain TNC 355 -Machine 2: Heidenhain TNC 415 Table: NC rotary table 1100x840mm Automatic swivel head Sleeve 120mm Milling spindle holder SK 50 Speed 2500 rpm As we offer several machines of this series, the pictures advertised are only sample pictures of comparable machines. Please send us your individual (control, table size, tilting & tilt) equipment, etc.) request, so that we can offer you a machine suitable for your requirements. MBM Maschinenservice & Gebrauchtmaschinen GmbH, is an independent specialist for SHW milling machines. Our main focus lies in the field of tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control system modernizations. Our services: - Used machines - Spare parts - Customer Service - Machine Service - Machine overhauls Gsdpjftc Uxjfx Ah Hstt - Control system modernisation

Condition: good (used), Year of construction: 1981, Table size 1300 x 400 mm Tool recording A4, ISO 40 Trajectories X-axis, autom./hand 1000/1020 mm Y-axis, autom./hand 350/370 mm Z axis, autom./hand 430/450 mm Speed range, 2 levels 32 – 1400 U/min Pinole in the vertical milling head yes Milling head, swivel ± 90 ° Pre-push X/Y axis, continuously 10 – 1000 mm/min Pre-push Z-axis, continuously 4 – 400 mm/min Breaking X/Y axis 5 m/min Gjded D Tf Hepfx Ah Hjtt Rush pass Z-axis 1.8 m/min Drive power, vertical + horizontal 3.2/4 kW Area requirement L x B x H 3200 x 2700 x 2200 mm Weight 2400 kg Accessories/Special features: • NC-Point Stretch Control HEIDENHAIN TNC 131 S • Interface RS 232 • Stepless feed • Automatic and/or manual operation possible • Safety devices/-queries for securing hand cranks when the X-Y and Z axis are moved manually as well as manual tool clamping • Vertical and horizontal milling spindle • Pinole in vertical milling head • Hydraulic axis clamping • Central lubrication • Coolant system Siegfried Volz Machine Tool Ruffle drinking str. 151-153 D-44143 Dortmund-Wambel

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, feed length X-axis: 2,000 mm, feed length Y-axis: 900 mm, feed length Z-axis: 800 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, total height: 3,130 mm, total width: 3,680 mm, total length: 5,350 mm, table width: 800 mm, table length: 2,000 mm, table height: 500 mm, position of the milling head: souvisle řízená ve 2 osách, type of input current: three-phase, rotational speed (max.): 4,000 rpm, rotational speed (min.): 20 rpm, table load: 3,000 kg, overall weight: 9,000 kg, workpiece weight (max.): 3,000 kg, Equipment: rotational speed infinitely variable, FSGQ 80 SM/A2 CNC - TOS KUŘIM Bed-Type Milling Machine, Table Length 2m Control System: Heidenhain TNC 530 Availability: In stock FSGQ 80 SM/A2 CNC – Technical Specifications: Basic Machine Data: Manufacturer: TOS Kuřim Overall length: 5,350 mm Overall width: 3,680 mm Overall height: 3,130 mm Total weight: 9,000 kg Total power requirement: 35 kVA Working Range: Longitudinal travel, X axis: 2,000 mm Transverse travel, Y axis: 900 mm Vertical travel, Z axis: 800 mm Spindle Head (Head S): Spindle taper: HSK-A 63 Max. power: 19.3 kW Speed range: 20 – 4,000 rpm Number of speed stages: stepless Machining: stepless in 2 axes Feed Range X – Y / Z: Number of stages / range: stepless / 5 – 20,000 mm.min-1 Table: Table size: 800 x 2,000 mm Max. table load: 3,000 kg Tool Changer: Gjdpfexp Iyusx Ah Hstt Number of tools: 24 Low-pressure tool cooling: 4 bar High-pressure cooling: 20 bar Control system: Heidenhain TNC 530 Further details upon request.

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 9101291, travel distance X-axis: 2,500 mm, travel distance Y-axis: 940 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 2,100 rpm, table length: 2,600 mm, TECHNICAL DETAILS Travel distances X-axis: 2,500 mm Y-axis: 940 mm Z-axis: 1,000 mm Spindle speed: 2,100 rpm Table length: 2,600 mm MACHINE DETAILS Control: Heidenhain 355 Weight: 10,000 kg Gtedpfx Ahsxdaiqs Hst EQUIPMENT SK50 milling head

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, travel distance X-axis: 1,390 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 540 mm, table load: 1,500 kg, controller model: Heidenhain TNC 355, TECHNICAL DETAILS Travel X: 1,390 mm Travel Y: 710 mm Travel Z: 540 mm Table width: 560 mm Table length: 1,800 mm Table load capacity: 1,500 kg Tool holder: SK50 Speed range: 45 - 2,240 rpm Vertical speed: up to 2,800 rpm Feed range: 3 - 2,000 mm/min MACHINE DETAILS Control: Heidenhain TNC 355 Main drive: 18.5 kW Transport dimensions & weight Transport dimensions (L x W x H): 2.7 x 3.0 x 2.9 m Transport width with X-axis drive removed: 2.45 m Machine weight: approx. 5.5 t Godpfsxn S Sfjx Ah Hett EQUIPMENT Rapid traverse on all 3 axes Swivelling milling head +/- 45°, including quill stroke 90 mm Swivelling bracket for vertical milling head Swivelling counterholder for horizontal milling arbors Electromechanical tool clamping Manuals

Condition: good (used), Year of construction: 2010, BMS 4AL CNC vertical milling machine ECS 1801 CNC Robust milling machine for a wide range of applications Meehanite cast iron construction 5HP spindle motor with inverter (variable speed) Gtodpfx Asupg Nujh Hot Automatic X- and Y-axis feeds with 1/2 HP motor and inverter Shelf ascent and descent with 1HP motor Large working area 305x1500 mm Spindle taper ISO 40 - Shank ø 105 mm Y- and Z-axis square guides Sliding on Turcite - B X and Y axes Case-hardened table and guides