Vigano' Mario Srl

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 1779, The K1 was rebuilt in 2020 and equipped with the latest safety features. It is now dismantled and can be loaded immediately. Dodox Ehmajpfx Addjwf

Condition: good (used), Year of construction: 2007, Tigerstop under-table crosscut saw with automatic length stop MUK 500 under-table crosscut saw with 500 mm saw blade and 5.5 kW motor power Djdex Ehlvopfx Addowf Tigerstop automatic length stop with a working length of 6,800 mm and closed roller table

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, K2 UF5 with HMD planer in front of the K2 To be dismantled by the buyer. Hundegger is available, if needed, to assist with dismantling either at the beginning of January or at the end of February. Machine delivered in JULY 2003. - 5-axis saw. - 5-axis universal milling unit. - Spare slot. - Vertical combination: 2 drilling spindles, 1 router. - Horizontal combination: 1 tilting drill, 1 drill, 1 mortiser. - Hydraulic turner. Dwedpfx Asx Dzu Ioddjf - 4-sided planer with reinforced 9.2kW motors. Sold with extraction system to dismantle and scraper system in the pit.

Condition: used, Year of construction: 2006, functionality: fully functional, Hundegger K2 450 Joinery Machine (UF5) with good equipment, well-maintained and reliable. Dwedjx Azrkepfx Addsf For sale is a Hundegger K2 joinery machine in good, regularly serviced condition. The machine comes from a well-kept operational environment and has always been properly maintained and cleaned. Manufacturer: Hundegger Model: K2-450 (UF5) Year of manufacture: 2006 Equipment: - Machine length: 11.76 m - Infeed: 8.51 m - Max. timber length infeed: 14.5 m - Max. timber length outfeed: 13.0 m - Colour: RAL 5012 blue - Infeed cross conveyor: 6 strands, horizontal, 2.2 m with flat bar chain - Infeed strand with shaft extension 2.2 m - Extendable timber outfeed - Under-table swiveling cross-cut saw - Alternative disposal via bin - Control for disposal device - Universal 5-axis milling unit UF5 - Roller cutter - Finger jointing cutter - Dovetail cutter - Combination support for vertically working tools - Drilling unit 2.2 kW - Drilling unit 3.0 kW - Finger jointing cutter - Combination support for horizontally working tools - Drilling unit 2.2 kW - Swiveling drilling unit - Slotting unit, 900 mm, double-sided guide - Longitudinal and cross-groove milling unit - Marking and labeling device integrated in table - Hydraulic beam turning station - Roller conveyor with pusher, 5.30 m - Network connection Available from: Autumn 2026 Location: Austria Price: on request All information subject to change; prior sale reserved. Sale ex location. No warranty or guarantee. Inspection and test run available by arrangement. If interested, just get in touch – we are happy to answer any further questions.

Condition: used, Year of construction: 2010, functionality: fully functional, CNC Production Line for Log Construction FORMA MBL The FORMA MBL CNC line is designed for speedy and high-precision machining of wall elements for both glulam and solid log houses. The system operates on Cadwork (IFC-based) software. Dwodpfx Aoxyf Evoddjf Material Capacity • Beam thickness: 120–240 mm • Beam height: 120–240 mm • Maximum workpiece length: 7.5 m The line is equipped with a hydraulic lifter and an automatic infeed system for efficient and continuous material handling. Processing Capabilities Drilling Operations • Vertical drilling for electrical conduits, dowels, and threaded rods • Horizontal drilling for electrical wiring, switch boxes, and socket recesses Corner Joint Machining Modules • Dovetail corner joint module • Cross corner joint module Sawing Modules • Horizontal saw unit for beam splitting and machining of window and door openings • Vertical cross-cut saw unit for trimming and end-cutting components Milling Operations • Electrical channel milling (cable grooves) • Sliding-beam milling for window openings Additional machining functions are illustrated in the attached graphic and photo documentation.

Condition: used, Year of construction: 2015, A very high quality German designed and built spindle moulder from leading manufacturer Martin. The machine although compact in design has a number of premium features as standard including the heavy composite frame to ensure maximum stability along with the 5.7" TFT colour touch screen control unit. This is positioned economically at eye level and helps reduce set up times markedly. From this unit the operator can easily set the required height of the spindLE. In addition the tool data memory gives the facility to store up to 500 different tools, automatically recalling the spindle height position, speed and other program data for the particular tool selected. Other standard features include a precision fence assembly, with hand wheel adjustment and digital display in the control unit, electronic soft braking device for the spindle motor and 'Dornfix' quick shaft change system Specification - Heavy duty basement for maximum stability and precise machining. - Precision ground cast iron table. - Overhead user friendly graphic colour touch screen control unit. - Heavy duty fence assembly with precision movement - movement by hand wheel - 1 off 11/4" dia spindle shaft (140mm working length) - SK40 'Dornfix' quick change system. - 7.5hp motor - 3000,4500,6000,8000 and 10,000 spindle rpm. - Centralised lubrication. Complete with following options: - Table extensions to both sides giving overall length of 2200mm with extendable workpiece support bar 3000mm overall length. - Integral fence plates - Digital display of fence plate right on control screen with adjustment by handwheel (instead of just normal scale rule). - Cast iron console for feed support - Comfort feed support arm with quick rise / fall by handwheel with mechanical display of height position. Heavy duty cast iron brackets and large steel clamping levers to ensure feed unit is securely locked in required position. - Feed unit variomatic 3 roller with variable mechanical feed speeds of 3 to 17m/min. On / off buttons for the feed unit integrated in to the control panel. Dwsdpfxjxx Upne Addef - Centrex cutter guard in Lieu of standard CPS guard.

Condition: excellent (used), Year of construction: 2021, operating hours: 4,000 h, functionality: fully functional, Equipment: type plate available, X-motion plus control: • with rotatable 15" smartouch monitor • unlimited memory space for operator-defined work programs • precise adjustment of distance parameters • simple and self-explanatory symbols for units and functions • glue temperature adjustment, automatic glue temperature reduction in standby mode • selection of units, precise adjustment of position-controlled and motor-set units (adjustment accuracy 1/100 mm) from the control panel • optimization of edge overhang at the front and rear of panels during pre-trimming • clear error messages Dwodsxx Aiispfx Addjf FORMAT 4 is a brand of FELDER KG

Condition: used, Year of construction: 2021, Dimensions of the blocks:​ Dwsdpfx Asxxw U Hsddsf Length : 114 mm [4.5 in] to 914 mm [36 in] Width : 38 mm [1 1/2 in] to 203 mm [8 in]​ Thickness : 16 mm [5/8 in] to 63 mm [2 1/2 in] ​ Production Input : Up to 200 lugs per minute Output : Up to 15 press cycles per minute

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, Blockhouse milling machine BL100A, completely overhauled with factory warranty For log thickness up to 140mm, construction height up to 200mm, machining length up to 9.0m • Infeed table (timing belt cross conveyor) and entry table for timber length 9m • Blockhouse milling machine BL100A – 4-side milling machine with hydro-pneumatic feed, 2x4kW / 2x3kW for cross-section approx. 140x220mm • Carbide insert tools for wall thickness approx. 40 – 100mm included • End groove milling unit 3.0kW with cutter B=21-40mm • Drilling device with drill guide and drill bit D=20mm Dodpfxoxxhwlj Addswf • Integrated under-table crosscut saw 4.0kW, saw blade D=500mm • Workpiece clamping pneumatic, with horizontal clamping jaws • Outfeed table 9m with pusher device and material storage table 6x1.5m • Servo slider positioning system with IPC control and IITO control software • Label printer for component marking, laser printer for production list printouts • Excellent condition, factory-refurbished and fully serviced, with parts warranty, ready for operation • Price & delivery time on request. Subject to prior sale and all rights reserved

Condition: like new (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 12762, cutting height (max.): 300 mm, Fully automatic wood infeed Infeed roller conveyor Infeed and loading cross conveyor Under-table pivot cross-cut saw 11 kW 5-axis universal milling unit – UF5 Combination support for vertically operating tools Drilling unit 2.2 kW – vertical drilling direction Combination support for horizontally operating tools Reinforced drilling unit (3.0 kW) horizontal drilling direction Slotting unit 7.5 kW Rear marking device (on the stop side) Fully automatic beam turning station, hydraulic Transport and positioning device "two-hand system" Dwedpfxexxa Dwj Addef Electronic control with Hundegger production software Roller conveyor for wood outfeed with ejector 5-arm timber rack Safety devices and guards Refined machine surface Extension for infeed cross conveyor Infeed roller conveyor for timber length 13 m 5-axis universal milling unit – UF5 Revolver milling unit – vertical from above Remote maintenance possible Control cabinet special arrangement Control unit for extraction with operating buttons Extension roller conveyor 7.10 m without drive Raising and lowering safety baffle plate

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, COMPLETE FACTORY FOR MOBILE PRODUCTION FOR SALE 1 pc AUTOMATIC ANGULAR PANEL SAW Manufacturer: HOLZMA – Germany Model: HCL 11/56/22 Serial No.: 0-241-17-0009 Year: 2001 1 pc AUTOMATIC SIZING, EDGEBANDING, AND BORING LINE INCLUDES: - BRIDGE VACUUM LOADER - AUTOMATIC SIZING AND EDGEBANDING MACHINE Manufacturer: HOMAG – Germany Model: OPTIMAT KFL 525/6/A3/15 Serial No.: 0-202-10-1687 Year: 2007 Dwodpsxwt Igefx Addjf - 90-DEGREE ROLLER CONVEYOR Manufacturer: HOMAG – Germany Model: PROFI TB 10/25/12 Serial No.: 0-205-10-5100 Year: 2007 - AUTOMATIC SIZING AND EDGEBANDING MACHINE Manufacturer: HOMAG – Germany Model: OPTIMAT KFL 526/8/A3/15 Serial No.: 0-202-10-1689 Year: 2007 - ROLLER CONVEYOR Manufacturer: HOMAG – Germany Model: OPTIMAT TDL 310/25/12 Serial No.: 0-205-10-1688 Year: 2007 - BORING MACHINE Manufacturer: WEEKE – Germany Model: OPTIMAT BST 500 D Serial No.: 0-251-04-2754 Year: 2007 - BORING MACHINE Manufacturer: WEEKE – Germany Model: OPTIMAT BST 500 D Serial No.: 0-251-04-2755 Year: 2007 - BRIDGE VACUUM UNLOADER

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 11174, For sale: our used Hundegger fully automatic joinery machine, model K2, year of manufacture 2001 - Infeed and loading cross conveyor (6-strand) - Underslung pivoting crosscut saw - Universal milling unit (UF4) - Combination support for vertically operating tools - Drilling unit 2.2 kW - vertical - Drilling unit 3 kW - vertical - Vertical finger-joint cutter 7.5 kW - Combination support for horizontally operating tools - Drilling unit 2.2 kW - Drilling unit 2.2 kW - horizontally swiveling - Slotting unit - Rear marking unit - Underside marking and labeling device - Fully automatic beam-turning station - Dovetail cutter - Transport and positioning device "two-hand system" - Electronic control - 5.30 m roller conveyor extension - 6-arm output table - Height-adjustable safety stop plate - AWF extension + timber feeder 13 m - Tooling included - Further details and accessories as shown in photos and available on request. Dwedpfx Adexvychsdof The machine is fully operational and can be inspected by appointment. Available from Spring 2026. All documentation is present, regularly serviced by Hundegger, sold without refurbishment. Dismantling and collection by the buyer. The sale is made as a used machine with the exclusion of any warranty or guarantee.

Condition: used, Year of construction: 2012, operating hours: 15,000 h, functionality: fully functional, machine/vehicle number: RD 22, feed length Y-axis: 15,000 mm, workpiece weight (max.): 15,000 kg, cutting height (max.): 300 mm, power of the milling unit: 12,000 W, saw blade diameter: 800 mm, working width: 625 mm, Equipment: safety light barrier, HUNDEGGER ROBOT DRIVE Year 2012 Section 40x60 to 650x300 Infeed length 15 m, outfeed with door Regular maintenance Centralized lubrication Tool package Dwjdpfx Adjxt Ndcsdef Dismantling not included Loading assistance included

Condition: new, functionality: fully functional, Equipment: CE marking, SRB - Vranje Construction Project specializes in the production of complete pelletizing equipment with capacities from 500 kg/h up to 6 t/h. We manufacture the following: Boilers Dedpfexqd T Hsx Addowf Dryers Silos Mixer with conditioner Mill Pellet cooler Presses Conveyor belts Mixers Dedusting systems Crushers All our equipment comes with a 1-year warranty. 24h service support We offer the following services: Equipment installation Diagnostics Servicing Line maintenance Staff training Commissioning All inquiries and requests can be sent by email or by phone on working days from 09:00 to 17:00.

Condition: excellent (used), USED MACHINE - V380/50 - "CE" Code: CAL-052 _ _ _ Working width: 1100 mm 1st group: steel roller 2nd group: rubber roller 3rd combined group: roller/pad Dedjxp Ecyopfx Addowf Motor power: 2 x 15 kW

Condition: used, 5-Bag Suction Filter, Complete Dedpfoxlb Siex Addjwf

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Hundegger Speed Cut SC1 CNC 2005 vintage, in good technical condition, looking for a new owner. Excellent for the production of nailed sheet metal roofs. Dsdpfexftaljx Addjwf Videos show the machine in operation.

Condition: ready for operation (used), functionality: fully functional, Automatic hydraulic press with GANG–NAILS connectors for trusses. Hydraulic press for pressing metal connectors and manufacturing trusses and other structural elements. Machine dimensions: 5.0 x 1.30 m – Left roller table 12.95 x 3.9 m – Right flat table 12.00 x 3.90 m – Pressing area 400 x 130 x height 20 cm – Total length 26.30 m x depth 3.90 m (tables) and 5.0 m (press). Includes a large batch of cartons of GANG–NAILS connectors. Dedpfx Asxdiuceddowf The right table is used for assembly and preparation of trusses and for distributing GN plates. Then, stepwise feed and clamping in the press. Finished elements are received on the left roller table. Manual removal of the item. In good technical condition.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 90450080, feed length Z-axis: 1,550 mm, workpiece weight (max.): 12,500 kg, cutting height (max.): 400 mm, feed rate Y-axis: 2,700 m/min, total length: 27,500 mm, total height: 4,500 mm, cutting width (max.): 800 mm, saw blade diameter: 520 mm, overall weight: 12,500 kg, power: 40 kW (54.38 HP), working length: 12,000 mm, working width: 800 mm, type of input current: three-phase, 5-Axis CNC Timber Frame Machining Center ESSETRE Techno One 1TG–5A 5-axis timber processing center (X Y Z B C) with fixed gantry Designed for the machining of all roof elements: straight and angled dovetail joints, tenon and mortise, hip and valley cuts, drilling with helical bits and by milling, all types of cuts, grooves and rebates – automatic feeding of beams – three tool magazines: 9, 2, and 5 positions each. Control panel – Essetre Travi graphical software Available tooling: saw blade, helical cutter head, tenoning cutter, roughing and straight cutters, dovetail cutters, 45° cutters, chain mortising unit Machining dimensions: max length 12,000 mm, max section 800 × 400 mm Overall dimensions: length 27.5 m × depth 390 cm × height 450 cm – total machine weight 12,000 kg Total installed power: 40 kW – 400 Volts – 60A – Air consumption: 400 Nl/min – Compressed air pressure: 6 bar Djdpfx Adexdik Rodswf Complete with a set of cutters, drill bits, and various accessories In good technical and visual condition Ref. M26 / y12–pp410k

Condition: good (used), Year of construction: 1994, Chalet notching machine with 10-meter Tiger stop pusher, equipped with: 1 horizontal milling unit on top, 1 horizontal milling unit below, 1 front/rear milling unit, 1 horizontal drilling unit diameter 16 mm, 1 automatic Tiger stop of 10 meters, year: 2001, effective working length: 9.20 m. Dedpfjxbn N Tox Addswf

Condition: used, functionality: fully functional, A complete production line for round timber processing, featuring frame saw technology as its core. The line is capable of processing logs with a top diameter of 15 cm and a butt diameter of up to 55 cm, in lengths from 2.5 to 9.5 meters. The technology consists of: 1) Log cascade for timber up to 10 meters in length, with dosing system 2) G710 frame saw, Královopolské strojírny - Equipped with a dosing carriage mounted on rails, featuring hydraulic centering of the piece - Output of the frame saw is fitted with separating wedges for distinguishing main and side lumber - The saw is powered by a 55 kW electric motor - Detailed description available in a separate file - The frame saw is followed by roller conveyors - Main lumber is returned via conveyors and directed to the second frame saw - Side boards are continuously transferred to the cascade, which delivers them to the edging center 3) G560 frame saw, Královopolské strojírny - Equipped with a dosing carriage mounted on rails, featuring hydraulic centering of the piece - Output of the frame saw is fitted with separating wedges for distinguishing main and side lumber - The saw is powered by a 45 kW electric motor - Detailed description available in a separate file - The frame saw is followed by a roller conveyor directing side boards to the cascade of the edging center - Main lumber is extracted immediately after being sawn, placed onto a carriage on rails, and, after package completion, pulled out of the sawmill using a winch 4) Edging center, Strojírny Loučná n. Desnou - Maximum cutting height 26 mm, cutting width 70 – 370 mm, total power consumption 29.2 kW - Detailed description available in a separate file Dwjdpfsxa Ettjx Addef - Side boards are dosed into the edging center via the vertical cascade - If required, boards are first cut to the desired production length, which can be set to fixed values or optimized for yield maximization - After cross-cutting, boards are edged to fixed widths in order to maximize lumber yield. Edged boards are then automatically transported via conveyors into storage bins according to their cut length. The final product is width-unsorted side lumber, typically with a width of 80 mm or more.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Technical specifications: Cast iron table dimensions: 905 x 372 mm Number of spindles: 21 Distance between spindles: 32 mm Maximum distance between spindles: 640 mm Maximum horizontal drilling height: 60 mm Maximum tool diameter: ø40 mm Dwjdjxauw Uopfx Addef Workpiece thickness: 10–85 mm Maximum panel width between arms: 833 mm Maximum drilling head travel: 70 mm Number of clamping holders: 16 Motor power: 400 V / 50 Hz, 1.8 kW (2.5 HP) Motor speed: 2800 min-1 Operating pressure: 5 bar Weight: 320 kg Pneumatic adjustment of the drilling head vertically and horizontally. Drilling head lockable at 0° – 45° – 90° positions. Standard includes 2 pneumatic clamps for workpiece securing. Drilling height adjustable via handwheel with mechanical display. Drilling depth adjustable via 5-position turret stop.

Condition: used, Year of construction: 1999, functionality: fully functional, saw blade diameter: 350 mm, working length: 3,200 mm, working width: 3,200 mm, saw blade speed: 4,600 rpm, saw drive: 7,500 W, working height: 60 mm, Equipment: documentation/manual, Homag Optimat CH04/32/32 Panel Saw – Fully Equipped Still in use to date, 1 to 2 days per week, but offered for sale due to business closure in Slovakia. Always well maintained. ✅ Powerful performance Saw motor (7.5 kW) – Scoring saw (1.1 kW) Main saw RPM: 4600 rpm – scoring saw 5100 rpm ✅ Ease of use Air blower unit for easy positioning of panels to be cut Dwjdpfx Aew S Tqljddef Immediately available, fully equipped 📍 The machine is located in Slovakia and must be dismantled and collected on site by the buyer.

Condition: used, Year of construction: 2022, functionality: fully functional, machine/vehicle number: MJY 142S-35, MJF 143-1535, MJY-MJF production line from the Chinese manufacturer China SHENGONG. The equipment was commissioned in 11/2022 and is designed for processing round logs with a maximum diameter of 340 mm and length of 5 m. The technology comprises: - Log infeed deck for 5 m logs with dosing and centering - Infeed conveyor to the machine - Double-shaft canting saw MJY 142S-35 - Outfeed pressure rollers - Distribution outfeed conveyor for cant and side boards - Side boards conveyor - Cant conveyor with lateral ejection and flipping - Cant conveyor to multi-rip saw - Centering unit before multi-rip saw - Double-shaft multi-rip saw MJF 143-1535 Dwjdpfx Asw Rg Emjddsf - Lumber conveyor behind the saw - Side chains and lumber conveyor - Edging saw MJ 141-0440 with 5 lasers for saw blade positioning - Roller conveyor before and after the edger - Belt conveyor under the Multipris for offcut removal - Connecting belt conveyor - Belt conveyor under the multi-rip saw for offcut removal to chipping - Belt conveyor for removal from the hall - Chutes and conveyor connections - Accessories: hydraulics, electrics, and control system The price of the technology is without dismantling and at FCA Nepomuk Incoterms.

Condition: excellent (used), Year of construction: 2020, Machines included in the line 1. VANHOLD M 300 tracked multi-blade saw 2. Outfeed belt behind the multi-blade saw 3. Transfer belt to the automatic feeder with knockers 4. VANHOLD Speed Master automatic feeder 5. VANHOLD Powermax 2300_5 four-sided planer Dwjdpfx Adew Nhflodsf Detailed technical specifications of the line – available on request via email. The price of the new line is 100,000 euros.