Used cup grinding machines for sale (22)

Condition: used, Cup grinding machine Make Gustav Brueckner Type FSH 1 Klsdpfscv Tb Djx Adwjl maximum distance : table - grinding wheel 200 mm table surface 315 x 135 mm 380 volt 0,75 kw 1,85 ampere Space requirement : D.650 x W.600 x H.1600 mm

Condition: used, Year of construction: 1998, Technical details: height of profile: 180 mm max. dia. of grinding wheel: 200 / Topfscheibe mm grinding wheel hole diameter: k.A. grinding spindle speed: 2800 U/min Table dimensions: LxB: 500 x 160mm mm voltage: 220 / 380 V Klsdpsu Ngrqofx Adwel total power requirement: 3,0 kW weight of the machine ca.: 0,57 t dimension machine xH: 1,1 x 1,0 x 1,7 m Application for face grinding Magnet mount: LxW = 680 x 200mm; tilt approx. 15°; swivel 360° via radial scale magnet: Type S2D; permanent magnet, clamping surface 300 x 150mm. Grinding wheel support: -adjustment vertical = length 180mm manual; swivel = approx. 45° right/left manual. Operation via control panel on machine. Coolant tank with pump and feed *

Condition: used, Cup grinder, swivel arm grinder, carbide chipbreaker groove grinder, tool grinder, grinder, angle grinder, lathe tool grinder -Grinding head: swiveling -Clamping table: 410 x 410 mm -Magnetic disk Hitachi: 470 x 160 mm -Abrasive tool diameter: 90 mm -Dimensions: 1440/760/H1745 mm -Weight: 712 kg Kljdpfx Aefl Acijdwol

Condition: used, Surface grinder, tool grinder, grinding machine, -Clamping table: 650 x 200 mm -x-axis: 650 mm -y-axis: adjustable 200 mm Kjdpfx Aofk Ud Hedwoll -max intermediate dimension: 350 mm -grinding wheels: Ø 150/max. 200 mm -Dimensions: 1300/1680/H1460 mm -Weight: 1080 kg

Condition: used, functionality: fully functional, Cup Grinding Machine Manufacturer: Delta Type: LF-350 Grinding length: approx. 360 mm Grinding width: approx. 155 mm Max. grinding height: approx. 280 mm Magnetic clamping surface: 350 x 150 mm Drive power: approx. 3 kW Grinding spindle speed: approx. 2840 rpm Grinding wheel dimensions: approx. Ø 200 x 80 x 78 mm Z-feed: manual Grinding movement: manual Equipment: Magnetic table Grinding wheel Grinding wheel protection Splash guard enclosure Space required: 1200 x 1200 x 1800 mm (L x W x H) Weight: approx. 450 kg Kjdjv Tqugopfx Adwsll The machine can be tested/demonstrated on-site under power. All information is provided without guarantee. Subject to prior sale. The purchased item is sold excluding any warranty. This exclusion does not apply to claims for damages resulting from grossly negligent or intentional breach of obligations by the seller, nor to any injury to life, body, or health.

Condition: good (used), Cup grinding machine, swivel arm grinding machine, carbide chip breaker groove grinding machine, tool grinding machine, grinding machine, angle grinding machine, turning tool grinding machine -Clamping table: 440 x 300 mm -Max. intermediate dimension: 130 mm -Grinding disc diameter: 125 mm -Dimensions: 1200/840/H1680 mm Kjdpfxecvnaio Adwell -Weight: 380 kg

Condition: excellent (used), Cup grinding machine Swivel arm grinding machine Make Lomefa Type Unicum 8" YEAR OF MANUFACTURE 1980 grinding wheel diameter 200 mm Motor 380 Volt 1,84 kw Separate coolant tank in the machine base Transport dimension: L.850 mm W.800 mm Kodpfxsui S R Do Adwoll H.1650 mm Weight 350 kg

Condition: new, Year of construction: 2024, functionality: fully functional, This powerful machine to meet the requirements of larger woodworking companies, ensuring exceptional sharpening results. Equipped with an electronic tooth counter and an autonomous cooling system. The ZM150 offers precise sharpening while maintainingoptimal operating conditions. With two electric motors, including a 150mm CBNdisk for sharpening and a motor reduction group for precise blade movement,this sharpener delivers outstanding performance. Power supply voltage - 380-400V Frequency - 50Hz Power - 0.20kVa Capacity - 65 teeth per min Blade width - 20 to 100 mm Tooth pitch - 6 -25mm Kledoxiv Ugjpfx Adwsl Sharpening disc - Profiled 150mm CBN disc Weight - 115kg

Condition: new, Year of construction: 2025, functionality: fully functional, The ASM 6-30 is a high-speed tooth setter for band saw blades, making it perfect for companies that use different volumes of bandsaw / sawmill blades per day. The machine is very user-friendly and easy to set up, making it the ideal solution for a wide variety of customers with different experiences in the industry. Voltage - 220V Frequency - 50Hz Power - 220V Secondary voltage - 24V Blade width - 15mm-60mm Tooth pitch - 6-30mm Accuracy - +- 0.04mm Blade thickness - 1.2mm Possible types of tooth set - left, right,straight/right,left,straight Kedpoxivgcjfx Adwoll The machine is very user-friendly and easy toset up, making it the ideal solution for a wide variety of customers withdifferent experiences in the industry. Achieving precise tooth setting isessential for straight cutting and extended blade life, and our advancedclamping system delivers an impressive accuracy of 0.04mm. Capable of setting80-120 teeth per minute, the ASM 6-30 enhances your company's efficiency andensures a smooth workflow.

Condition: new, Technical data: Distance between axes d. Grinding wheel - axis of the column: 300 mm Max. distance table - grinding wheel: 280 mm Largest grinding surface: 140 x 300 mm Rapid feed per speed: 2 Fine adjustment by micrometer: 0.01 mm Cup wheel dimensions: 178 x 78 x 78 mm Segment dimensions: 50 x 16 x 90 mm Speed of the grinding wheel: 2840 1/min Spindle motor power: 2.2 kW Electric pump power: 0.06 kW Weight: 400 kg Dimensions: 850 x 850 x 1650 mm Kjdpfjvnriuox Adwell Equipment: - Cast column on adjustable ball roller bearings - Wet grinding device - Safety low-voltage system (24V) - Grinding wheel holder and grinding segments (first set) - Grinding wheel protection and Table enclosure - Operating and maintenance instructions - CE declaration of conformity

Year of construction: 1985, condition: refurbished (used), Cup grinding machine Make: GMN Model: MPS E-200 Year of manufacture: 1985 Machine No.: 9701 with warranty Kledpfsgayvqjx Adwel Accessories: - Grinding wheel Ø 200 with flange - Dressing diamond - lateral dresser - magnetic clamping plate 250 x 150 mm (pole pitch: 2 mm) - wet grinding device - instruction manual - used, as seen -

Condition: new, Cup grinding machine Make: DELTA Kodsfhv Edopfx Adwell Model: LB 300 Condition: New machine equipped as standard with: - Grinding wheel flange - grinding wheel - Wet grinding device - Operating instructions

Condition: used, Year of construction: 1968, workpiece length 200 mm work piece width 110 mm workpiece height 135 mm Kedpfxowz Rtds Adwjll dia. of cup wheel 125 mm magnetic clamping plate 200 x 100 mm spindle throat 75 mm spindle speed: 2.800 U/min. voltage 380 V total power requirement 0,8 kW weight of the machine ca. 120 kg dimensions of the machine ca. 0,65 x 0,65 x 1,80 m - Serial-No.: 5991 - with magnetic plate - hydr. UP / DOWN - Fine feed via rotary wheel - Diamond cup wheel - Coolant device

Condition: used, Year of construction: 1982, functionality: fully functional, Cup grinding machine with internal cooling Klodpsw Elu Defx Adwjl Magnet size: 200x150 mm Grinding wheel diameter: 170 mm Height adjustable up to 160 mm and can be lowered. Hydraulic operation with hand lever. Fine adjustment with crank Internal lighting

Condition: good (used), Kugelmüller MPS 3 Grinding length approx. 600 mm Kodpfxjukpd Ro Adwjll Magnetic plate 200 x 400 mm Table with hydraulic drive Hydraulic lifting and lowering Fine infeed vertical Surface grinding and profile grinding Used to grind guideways

Year of construction: 1992, condition: good (used), machine/vehicle number: 20281, Offer 23034 Technical data: - max. grinding length approx. 350 mm - max. grinding width 150 mm - max. installation height with / without magnet 150 / 210 mm - grinding wheel stroke approx. 200 mm - clamping surface 300 x 160 mm - magnetic clamping plate 250 x 150 mm - grinding wheel dimension approx. 200 x 80 x 78 mm - grinding wheel speed 2800 rpm - swivel range of the grinding arm approx. 180 ° Kljdpfx Aoklxwksdwol - manual swivel arm clamping via clamping lever - wet grinding device - drive 400 V / 1,85 kW - space requirement approx. W 850 x H 1650 x D 800 mm - weight approx. 350 kg

Condition: new, Vertical precision grinder with rotary table, grinding wheel dimensions 200x78x78 mm, wheel speed 2800 rpm, grinding wheel motor 3 kW, electropump motor 0.09 kW, rotary table 400 mm. Machine dimensions 1250x950x1800 mm, weight 600 kg. Kodpfjxdnprox Adwsll

Condition: good (used), Cup wheel - diameter: 175 mm Spindle projection: 180 mm Operating voltage: 400 V Klodpfx Aec Skfbjdwol Machine weight approx.: 300 kg Space requirement approx.: 0.90 x 0.60 x 1,80 m

Condition: used, Year of construction: 1980, machine/vehicle number: 46.60, workpiece length:310 mm work piece width:150 mm workpiece height:210 mm spindle speed max.:2800 U/min distance grinding wheel - table:280 mm magnetic clamping plate: magnetic:300 x 150 x 70 mm spindle throat:250 mm Column-Diameter:130 mm Klsdpfx Aocxxlrsdwol total power requirement:1,9 kW weight of the machine ca.:0,58 t dimensions of the machine ca.:0,62 x 0,72 x 1,80 m

Condition: good (used), DELTA LC 400 - Cup Grinding Machine / Rotary Table Grinding Machine - Grinding diameter: 400 mm - Grinding height: approx. 220 mm - Speed range: 2850 rpm - Grinding wheel dimensions: 200x80 mm (corundum) - Height adjustment via hand wheel - Fine feed via hand wheel Kedsxch R Hepfx Adwjll - Drive power: 3 kW - 2 x emergency stop/start - Coolant system - Machine enclosure - Documentation Dimensions: LxWxH 1.1x0.8x1.8 meters / Weight 800 kg Subject to errors and omissions

Condition: good (used), G & N - Kugelmüller MPS 1 / Cup Grinding Machine -Spindle speed: 3150 rpm Kledpfxsw U Atzj Adwsl -Grinding height above magnet: 130 mm -Magnetic chuck: 200x100 mm -Lateral grinding wheel dresser device -Fine adjustment -Drive motor: 0.6 kW -Coolant unit through grinding spindle -Machine enclosure -Documentation Dimensions: LxWxH 0.8x0.7x1.8 meters / Weight 180 kg Errors and input mistakes excepted

Condition: good (used), G&N Kugelmüller MPS 1 - Surface Grinding Machine - Spindle speed 3150 rpm - Grinding height above magnet approx. 130 mm Kedpow Dptusfx Adwsll - Magnetic chuck 200x100 mm - Side mounted wheel dresser - Fine adjustment - Drive motor 0.6 kW - Machine enclosure Dimensions: LxWxH 0.8x0.7x1.6 meters / Weight 150 kg Errors and omissions excepted.