Three L Technologies SIA

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 8698, overall weight: 380 kg, Powerful corner crimping machine for processing aluminium profiles with groove sizes from 25–60 mm and profile chamber offset up to 40 mm. The adjustable punching units and infinitely height-adjustable sensors, knives, and stop inserts allow for precise adaptation to a wide range of profile contours. Hjdpsy Sptkefx Ai Djnl

Condition: new, Year of construction: 2024, Corner Crimping Machine - Pertici HP 601, year 2024 - BRAND NEW Hydraulic corner crimping machine designed for the processing of aluminium profiles: Its cast iron and steel construction makes it robust and reliable, ensuring consistent crimping quality over time. The crimping heads are controlled by a single mechanical command, guaranteeing perfect synchronization of movements. The machine is equipped with a hydraulic clamping wedge that ensures maximum profile holding during the crimping operation. The easy adjustment of the knife blocks allows quick and efficient profile changeovers. Hnsdpfoy R S Uuex Ai Del Technical specifications: Maximum crimping force: 3500 Kgp Maximum punching height: 120 mm Nominal pressure: 7 bar Dimensions (L x H x D): 850 x 1250 x 800 mm Weight: 300 kg

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Corner crimping press Elumatec, Type: EP 124, Year: 2005 Pressing height: 140 mm Pressing force: 70 kN (7 t) Drive: pneumatic With support arms and pressing knives Electrical connection: 230 V 50/60 Hz Compressed air connection: 7 bar Air consumption: 35 l per working cycle Hnsdpfx Ajy Rfz Uji Dol Dimensions (L x W x H): 1100 x 950 x 1230 mm Weight: 545 kg (Technical data subject to change and error, as well as prior sale reserved)

Condition: good (used), Corner joining machine, hydro-pneumatic, for aluminium window profiles up to 210 mm total height (max. punching height 150 mm) incl. 2 sets of standard punching knives, height adjustable; pneumatic hold-down cylinders; retractable stop; 2 swivelling profile support arms; operation via 2 foot pedals. Hjdpfjy Nm Dbjx Ai Donl

Condition: excellent (used), Year of construction: 2017, Year: 2017 - technically efficient, ready to work – after full service - split heads Hnodsy Naz Topfx Ai Dol - pneumatic drive - maximum profile height: 160 mm - resistance unit lowered under the table - hydraulic lock for reversing the resistance unit

Condition: used, Machine designed for inserting plastic bars into the slots of aluminium profiles. The drive system consists of four motorized rotors, preventing the bars from jamming during the insertion process. The AS 242 L thermal break profile bar insertion device has been designed to efficiently insert plastic bars into aluminium thermal break profiles, ensuring smooth flow, precise alignment, and reduced cycle times. No. 2 motors, 0.75 kW – 400 V – 50 Hz Operating pressure: 7 bar Hnsdjy Idxmspfx Ai Dsl Bar feed speed: 100 m/min Bar guide travel: transverse 7 – 256 mm, vertical 0.5 – 140 mm Working capacity (bar height): Minimum 10 mm – Maximum 60 mm Automatic ejection of the bar tail Push-button for partial insertion of the bars into the lower profile The transverse adjustment of the bar guide is carried out via a single control equipped with a decimal position indicator. The vertical adjustment of the bar guide is carried out via two independent controls, each equipped with a decimal position indicator. Bar stop can be excluded via push-button control Machine dimensions: 1020 mm (width) x 825 mm (depth) x 1400 mm (height) Machine weight: 235 kg

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 1240024978, input voltage: 230 V, operating pressure: 7 bar, pressure: 7 bar, We are offering this used elumatec EP 124 corner crimping press, year of manufacture 2011. Hjdpfey D Nbfex Ai Denl Model: EP 124 Machine No.: 1240024978 Voltage: 230 V Frequency: 50 Hz Current: 1 A Power: 120 W Operating pressure: 7 bar If you have any questions or need further information, please feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Corner Crimping Press Elumatec, Type: EP 124, Year: 2013 Pressing height: 140 mm Pressing force: 70 kN (7 t) Drive: pneumatic With support arms and pressing knives Electrical connection: 230 V 50/60 Hz Compressed air connection: 7 bar Air consumption: 35 l per working cycle Dimensions (L x W x H): 1100 x 950 x 1230 mm Hnjdpjyyq Ekofx Ai Djl Weight: 545 kg (Subject to changes and errors in technical data as well as prior sale.)

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 22499, overall weight: 545 kg, Pressing height 140 mm Pressing force 70 kN (7 t) Pneumatic drive Power supply 230 V, 1~, 50/60 Hz Compressed air supply 7 bar Air consumption per working cycle 35 l Length 1,100 mm, depth 950 mm, height 1,230 mm, weight 545 kg For pressing profiles with large dimensions with the highest quality requirements The machine is easy to adjust and operate and has short changeover times thanks to a simple blade-changing system Extremely high pressing force due to large-volume bellows cylinder (maintenance free) With retractable, hydro-pneumatically controlled counter bearing The specially-designed counter bearing head allows pressing of frames with an inner dimension starting at 150 mm (clear dimension) Hedpfeyyq Dmsx Ai Denl The pressing depth can be set separately for each tool carriage An adjustable pressing blade is also available to compensate for the profile chamber offset Support arms and pressing blades included as standard Machine is ready for operation. We can offer shipping.

Condition: used, Press height 140 mm Press force 70 kN (7 t) Hydropneumatic drive Compressed air connection 7 bar Air consumption per operating cycle 35 l Hnedpfx Aijyvgm Ao Dsl Length 1,100 mm, Depth 950 mm, Height 1,230 mm Weight 550 kg

Condition: used, Year of construction: 2001, Hydropneumatic operation Hodpfoyu Rztox Ai Djnl Profile height: 210 mm under hold-down Max. stamping height with double-adjustable punching heads: 145 mm Abutment height: 150 mm Weight: approx. 400 kg

Condition: used, Year of construction: 2009, Hydraulic operation Profile height up to 210 mm under hold-down Max. stamping height with double-adjustable punching heads: 145 mm Abutment height: 150 mm Hjdpfx Asyu Rw Isi Denl Weight: approx. 450 kg

Condition: like new (used), Year of construction: 2026, Corner Crimping Machine WEGOMA Hnedsyuziuopfx Ai Dol The EV175 has an automatic positioning system according to the profile width • easy convertible and adjustable by scale • dual foot pedal operation for clamping and crimping • laminated nylon support pads on table and support arms • second positioning key for special profiles and crimping tools on request • sinkable anvil, hydropneumatic • vertical clamping cylinders • weight of crimping knives easy adjustable

Condition: used, Year of construction: 1998, Hydropneumatic operation Profile height: 180 mm under hold-down Hsdpeyrrddjfx Ai Djnl Max. insertion height: 145 mm Abutment height: 150 mm Weight: approx. 400 kg

Condition: used, Year of construction: 1995, Hydropneumatic operation Profile height: 180 mm under hold-down Max. insertion height: 145 mm Abutment height: 150 mm Hnsdeyrrbvopfx Ai Dol Weight: approx. 400 kg

Condition: used, Year of construction: 2011, Hydropneumatic operation Profile height: 200 mm below hold-down Max. punching height: 150 mm Hedpfeynalujx Ai Donl Abutment height: 150 mm Weight: approx. 400 kg

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, overall weight: 380 kg, Dimensions (W x H x D): 950 x 800 x 1150 mm Weight: 350 kg Hnedjyl R T Depfx Ai Del Operating principle: hydropneumatic Operating pressure: pneumatic, 6 to 8 bar Air consumption: 10 liters per stroke Pressing force: 35 kN at 7 bar Air connection: R 1/4" Punching stroke: 20 mm Return stroke: 100 mm Max. punching height: 120 mm Max. profile height: 120 mm

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, overall weight: 4,000 kg, total height: 1,600 mm, total width: 4,000 mm, total length: 5,000 mm, input voltage: 400 V, type of input current: three-phase, operating pressure: 7 bar, Schüco aluminum window manufacturing machines for sale. Schüco EVM-S4 4-head crimping press, Elumatec dual-head mitre saw, Rotox pantograph milling machine, Graule dual blade angle cutter, Graule single blade divider miller, base presses for Schüco punching tools, various hand tools, complete manufacturing setup. Hodpoyf Idtjfx Ai Djnl

Condition: new, Year of construction: 2025, Corner Jointing Machine EV175 Stable and precise corner joints Hnedpfx Ajxta Rmsi Djl The EV175 combines cost-effectiveness with high corner stability. The ideal machine for all standard profiles and corner brackets.

Condition: used, Hydropneumatic operation Max. punching height: 90 mm Abutment stroke: 100 mm Punching stroke: 20 mm Pressing force: 30 kN Max. profile height: 100 mm Hsdpfx Asw Inudsi Djnl Weight: approx. 280 kg

Condition: good (used), Cable reel, cable unwinder, power cable reel, cable reel, workshop reel, cable drum, wall cable drum, workshop cable drum, wall reel -Manufacturer: Zeca, cable drum cable reel -Cable: 12-core, length: 50 m -Hole diameter: 180 x 10 mm -Dimensions: 715/480/H800mm Hnsdpfxjt Uwx De Ai Dol -Weight: 73 kg

Condition: excellent (used), Year of construction: 1999, Type: AKF 250L Motor: 400V 2,2kW Speed: 2800 rpm Cutter O: 250mm Cutter holder shaft O: 40mm Milling width: 300mm Milling depth: 85mm Profile height: 160mm Weight: approx. 150kg Dimensions W x H x D 950 x1450 x 930 mm Hnjdpfxjtt Eb Sj Ai Del

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 901 S Pnömatik Alüminyum Köşe Presi Makinası, - Conforms to CE standards Hnsdpfxjrbiv Ae Ai Dol - Corner press machine designed for 90 degree joining of aluminum profiles - 2 top presses and blade movement is pneumatic - There is a mm ruler system for the height and advancement of the blades. - Centering miter wedge is automatic - Drain button available for fine adjustment - Pneumatic presses use 2 pedals to squeeze the profile - Profile surfaces are polyamide sheet to prevent damage - Side support arms available

Condition: new, Year of construction: 2026, Pneumatic press for the production of aluminum components, suitable for all types of grooving, punching, and drilling, featuring an adjustable-height ram and foot pedal operation. Maximum force / working load: 3,000 kg at 8 bar Hjdpfx Ajpa Nw Sji Donl Pneumatic pressure: 6–8 bar Usable light (vertical clearance): 260 mm Stroke range: 0–35 mm Packing dimensions: 500 x 320 mm Ram speed: 23 mm/s Approximate air consumption per cycle: 25 liters Table dimensions: 530 x 340 mm Clear height: 260 mm Adjustable stroke: 0 to 35 mm OPTIONS: Rotary cabinet / base stand PACKAGING AND DIMENSIONS: 600 x 490 x 600 mm (86 kg) Standard packaging: wooden crate We look forward to hearing from you! Plantec Maschinen GmbH

Condition: excellent (used), Corner jointing machine Pressta Esiele PV10 P Hedpfx Ajl Skl Iei Denl EU shipping approx. €350