Shapiro Enterprises Ltd.

Condition: used, Parallel Lathe WEISSER HEILBRONN Between points: 1100 mm Maxi Ø on bench: 440 mm Itjdpjxpufqofx Aabsn Maxi Ø over saddle: 230 mm Cone: CM4 Spindle diameter: Ø 45 mm Spindle speed: from 45 to 2000 RPM TRIPAN Turret 3-jaws chuck Ø 200 mm Threadings: Metric + Whitworth Auto feeds longitudinal + transversal Lubricant pump Voltage: 380 V Dimensions (L x W x H): 2500 x 1300 x 1500 mm Weight: approx 2 T

Condition: ready for operation (used), WEILER COMMODOR 230 / Heidenhain digital readout Machine originates from an educational institution Itsdpfx Aoxpilfoabon - CS identifier - Centre height: 230 mm - Distance between centres: 1000 mm - Swing over bed: 475 mm - Swing over cross slide: 270 mm - Bar capacity: 56 mm - Spindle speed range: 25-2000 rpm - Automatic longitudinal/cross feeds - Thread cutting / metric / imperial etc. - Tailstock: Morse taper 4 - 3-jaw chuck: 200 mm - Quick-change toolpost with inserts - Coolant system - Chuck guard - Chip backsplash - Work lamp - Emergency stop - Machine feet - Documentation Dimensions: LxWxH 2.5 x 1.5 x 1.7 meters / Weight: 1800 kg Subject to errors and omissions

Condition: good (used), Year of construction: 1997, Used lathe by TOS Itsdoxphxqspfx Aabon Type: SN 40 C 1000 Swing diameter: 400 mm Turning length: 1000 mm 2-axis digital readout 3-jaw chuck

Condition: ready for operation (used), Year of construction: 1977, Available immediately from insolvency: Isdpfx Ajxn R Dmjabjtn Stanko Lathes (longitudinal and transverse) Type 16 K 20 Year of manufacture: 1977 Retrofit and digital readout in 2012 Centre height: 200 mm Swing over bed: 400 mm Swing over cross slide: 220 mm Spindle bore: 55 mm Spindle speeds: 12.5 – 1600 rpm Drive: 7.5 kW Chuck Tailstock Coolant system Multifix tool holder with inserts Digital readout Steady rest (Lynette) Weight: 2700 kg Priced at EUR 2,500 plus VAT ex works

Condition: excellent (used), Parallel Lathe WEILER type PRIMUS Between points: 400 mm Itsdpfx Aaexnp I Djbjn Maxi Ø on bench: 250 mm Maxi Ø over saddle: 130 mm Spindle Ø 24 mm Turret Multifix type A 3-jaws chuck Ø 155 mm Threadings Metric + Whitworth Tailstock CM2 Scale HEIDENHAIN ND522 Feeds: auto 2 axes New electrical panel Delivered with: 1 4-jaws chuck Ø 155 mm, 4 tool holders, 1 drill chuck Voltage: 380 V Dimensions (L x W x H): 1300 x 900 x 1900 mm Weight: approx 500 kg Machine in VERY GOOD CONDITION

Condition: ready for operation (used), Year of construction: 1978, spindle bore: 41 mm, turning diameter: 500 mm, center width: 1,000 mm, capacity 1000x500MM gap bed 750MM spindle bore 41MM Isdpfexnc Tmox Aabstn

Condition: ready for operation (used), Year of construction: 1981, functionality: fully functional, machine/vehicle number: 6970-06, turning diameter: 480 mm, turning diameter over top slide: 240 mm, center height: 240 mm, turning length: 1,000 mm, spindle speed (max.): 2,240 rpm, No minimum price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! Submitting a bid obligates you to collect the machine on time between 01/12/2025 and 05/12/2025! TECHNICAL DETAILS Turning diameter: 480 mm Swing diameter over cross slide: 240 mm Turning length: 1,000 mm Spindle bore: approx. 63 mm Spindle speed: 11–2,240 rpm Iodpfx Aoxm Sizoabjtn Centre height above bed: 240 mm Centre height above carriage: 140 mm Turning diameter over carriage: 240 mm MACHINE DETAILS Electrical Data Operating voltage: 380 V Frequency: 50 Hz Rated current: 35 A Dimensions & Weight Dimensions (L x W x H): 3,500 x 1,200 x 1,800 mm Weight: 3,000 kg EQUIPMENT Tailstock Steady rest Toolpost Four-jaw chuck, diameter 250 mm Three-jaw chuck, diameter 250 mm Three-axis digital readout Various tool holders Centres Taper

Condition: good (used), Year of construction: 1957, Ref. -No.: 10573 Manufacturer: VDF Type: W 40 Year of construction: 1957 Type of control: Konventionell Storage location: Halberstadt Country of origin: Germany Machine-No.: 030XXXX Turning Diameter: Ø 960 mm Itjdpfxsxmd Upo Aabsn Turning Length: 4500 mm Spindle Speeds: Ø 105 RPM Turning diameter over cross slide: Ø 600 mm

Condition: new, Bernardo Universal Lathe Solid 460 x 2000 Pro Vario Technical Specifications Centre distance: 2000 mm Centre height: 230 mm Swing over bed: 460 mm Swing over gap: 690 mm Swing over cross slide: 274 mm Bed width: 300 mm Spindle bore: 80 mm Spindle mount: DIN 55029, D1-8 Speed range: 25 – 250 / 250 – 1700 rpm Longitudinal feed range (42): 0.055 – 3.065 mm/rev Cross feed range (42): 0.025 – 1.386 mm/rev Metric threads (41): 0.1 – 14 mm Inch threads (60): 2 – 112 TPI Quill diameter: 60 mm Quill stroke: 130 mm Quill taper: MT 4 Motor power: 5.5 kW (7.5 HP) Itedpfxexl Tcmj Aabjn Machine dimensions (W x D x H): 3250 x 1080 x 1370 mm Weight approx.: 2030 kg Features • Modern main spindle bearing with precision angular contact ball bearings • Standard with Delta frequency inverter for high torque at low speeds and nearly constant speed under load • Infinitely variable speed control, set speed displayed on digital readout • Hardened and ground gears and shafts, including in feed gearbox • Standard with rapid traverse longitudinally and in cross for reduced non-productive times • Central, user-friendly feed and thread selection with leadscrew and feed rod • Oversized, hardened, and precision-ground gears • Simple, smooth, and precise speed and feed adjustment • One-piece cast machine bed, extremely torsion-resistant and low-vibration, ensuring essential prerequisites for precision turning Scope of Delivery • 3-axis digital readout ES-12 V with LCD display • 3-jaw chuck PS3-250 mm / D8 • Fixed steady rest – max. passage diameter 150 mm • Travelling steady rest – max. passage diameter 110 mm • Initial fill with Shell Tellus 46 • Face plate 450 mm • Quick-change tool post with 4 holders • Safety device for quick-change tool post • Foot pedal with CE-compliant brake function • Coolant system • Frequency inverter • Overload clutch • Rapid traverse longitudinal and cross • Change gears • Reducing sleeve • 2 centres • Thread dial indicator • LED machine lamp • Chip guard at the rear • Operating tools

Condition: new, Bernardo Universal Lathe Solid 460 x 1000 Pro Vario Technical Specifications - Distance between centres: 1000 mm Iodpfx Ajxl Tcasabotn - Centre height: 230 mm - Swing over bed: 460 mm - Swing over gap: 690 mm - Swing over cross slide: 270 mm - Bed width: 300 mm - Spindle bore: 80 mm - Spindle mount: DIN 55029, D1-8 - Spindle speed range: 25 – 250 / 250 – 1700 rpm - Longitudinal feed range (42 rates): 0.055 – 3.065 mm/rev - Cross feed range (42 rates): 0.025 – 1.386 mm/rev - Metric thread pitches (41): 0.1 – 14 mm - Inch thread pitches (60): 2 – 112 TPI - Quill diameter: 60 mm - Quill travel: 130 mm - Quill taper: MK 4 - Motor power: 5.5 kW (7.5 HP) - Machine dimensions (W x D x H): 2300 x 1080 x 1600 mm - Weight: approx. 1730 kg Features • Modern headstock spindle bearing with precision angular contact ball bearings • Standard-equipped with Delta frequency inverter for high torque at low speeds and near-constant speed under load • Infinitely variable speed control; set speed is shown on the digital display • Hardened and ground gears and shafts, including in the feed gearbox • Standard longitudinal and cross rapid traverse for minimized idle times • Central, user-friendly controls for feeds and threading, with leadscrew and feed rod • Large-size gears, hardened and precision-ground • Simple, smooth and precise speed/feed adjustments • Machine bed is one-piece cast, extremely rigid and low-vibration for accurate turning Scope of Delivery • 3-axis digital readout ES-12 V with LCD display • 3-jaw chuck PS3-250 mm / D8 • Fixed steady rest – max. diameter 150 mm • Travelling steady rest – max. diameter 110 mm • Initial fill with Shell Tellus 46 • Face plate 450 mm • Quick-change toolpost with 4 tool holders • Safety guard for quick-change toolpost • Foot pedal with CE-compliant braking function • Coolant system • Frequency inverter • Slip clutch • Longitudinal and cross rapid traverse • Change gears • Reducing sleeve • 2 dead centres • Thread dial indicator • LED machine lamp • Chip guard • Operating tools

Condition: new, Bernardo Universal Lathe Smart 410 x 1500 Pro Vario Technical Specifications Centre distance: 1500 mm Centre height: 210 mm Swing over bed: 420 mm Swing over gap: 580 mm Ijdoxl Ta Sopfx Aabotn Swing over cross slide: 255 mm Bed width: 250 mm Spindle bore: 52 mm Spindle mount: DIN 55029, D1 – 6 Speed range, 2 stages: 30 – 550 / 550 – 3000 rpm Longitudinal feed range (17): 0.05 – 1.7 mm/rev Cross feed range (17): 0.025 – 0.85 mm/rev Metric threads (42): 0.2 – 14 mm Imperial threads (45): 2 – 72 TPI Quill diameter: 50 mm Quill travel: 140 mm Quill taper: MT 4 Motor power: 5.5 kW (7.5 HP) Machine dimensions (W x D x H): 2590 x 1050 x 1600 mm Weight: approx. 1325 kg Features • Equipped as standard with Delta frequency inverter for high torque at low speeds and nearly constant speed under load • Infinitely variable speed control, selected speed displayed digitally • Prism bed made of cast iron, inductively hardened and precision ground • Central, user-friendly feed and thread control with leadscrew and feed shaft • Modern main spindle bearings with precision angular contact ball bearings • Standard features include frequency inverter and 3-axis digital readout • Hardened and ground gears and shafts, including in the feed gearbox • Speed and feed settings are simple, smooth, and precise to operate • Adjustable tailstock for taper turning, handwheel with fine scaling (0.02 mm) • Removable bridge allows machining of large-diameter workpieces Scope of Delivery • 3-axis digital readout ES-12 V with LCD display • 3-jaw steel chuck PO3-200 mm / D6 • Faceplate 350 mm • Fixed steady – max. workpiece diameter 135 mm • Travelling steady – max. workpiece diameter 65 mm • Foot pedal with brake function according to CE • Four-way tool post • Safety guard for four-way tool post • Micrometer longitudinal stop • Turret stop with fine adjustment • Frequency inverter • First fill with Shell Tellus 46 • Coolant system • Slip clutch • Thread dial indicator • LED machine lamp • Change gears • Reducing sleeve • 2 dead centres • Chip guard/rear screen • Operator tools

Condition: new, Bernardo Universal Lathe Smart 410 x 1000 Pro Vario Technical Specifications Centre distance: 1000 mm Centre height: 210 mm Swing over bed: 420 mm Swing over gap: 580 mm Swing over cross slide: 255 mm Bed width: 250 mm Spindle bore: 52 mm Spindle mount: DIN 55029, D1 – 6 Speed range, 2 steps: 30 – 550 / 550 – 3000 rpm Longitudinal feed range (17): 0.05 – 1.7 mm/rev Cross feed range (17): 0.025 – 0.85 mm/rev Metric threads (42): 0.2 – 14 mm Inch threads (45): 2 – 72 TPI Quill diameter: 50 mm Quill travel: 140 mm Quill taper: MT 4 Motor power: 5.5 kW (7.5 HP) Machine dimensions (W x D x H): 2090 x 1050 x 1600 mm Weight approx. 1145 kg Features • Standard with Delta frequency inverter for high torque at low speeds and nearly constant speed under load • Infinitely variable speed control, with set spindle speed displayed digitally • Prism bed made of grey cast iron, induction-hardened and precision ground • Central, user-friendly controls for feeds and threading with leadscrew and feed shaft • Modern main spindle bearing arrangement with precision angular contact ball bearings • Standard with frequency inverter and 3-axis digital readout • Hardened and ground gears and shafts, including those in the feed gearbox • Simple, smooth, and precise adjustment of speed and feed settings • Sliding tailstock for taper turning, handwheel with adjustable fine scale (0.02 mm) • Removable gap bridge for machining large-diameter workpieces Scope of Delivery • 3-axis digital readout system ES-12 V with LCD display • 3-jaw steel chuck PO3-200 mm / D6 • Face plate 350 mm • Fixed steady rest – max. capacity dia. 135 mm • Travelling steady rest – max. capacity dia. 65 mm • Foot pedal with brake function, CE compliant • Four-way tool post • Safety guard for four-way tool post • Micrometer longitudinal stop Iodpfxexl Tare Aabotn • Indexing stop with fine adjustment • Frequency inverter • Initial fill with Shell Tellus 46 • Coolant system • Slip clutch • Thread dial indicator • LED machine lamp • Change gears • Reducing sleeve • 2 centre points • Chip guard (rear) • Operating tools

Condition: new, Bernardo Universal Lathe Solid 460 x 2000 Pro Technical Specifications Distance between centers: 2000 mm Center height: 230 mm Swing over bed: 460 mm Swing over gap: 690 mm Swing over cross slide: 270 mm Bed width: 300 mm Spindle bore: 80 mm Spindle mount: DIN 55029, D1-8 Spindle speed range (12 steps): 25 – 1700 rpm Longitudinal feed range (42 steps): 0.055 – 3.065 mm/rev Cross feed range (42 steps): 0.025 – 1.386 mm/rev Metric threads (41): 0.1 – 14 mm Inch threads (60): 2 – 112 TPI Tailstock quill diameter: 60 mm Tailstock quill travel: 130 mm Tailstock taper: MT 4 Motor power: 5.5 kW (7.5 HP) Machine dimensions (W x D x H): 3250 x 1080 x 1600 mm Weight approx.: 1995 kg Features • Modern main spindle bearing assembly with precision angular contact ball bearings • Hardened and ground gears and shafts, including feed gearbox • Central, ergonomic control for feeds and threads via lead and feed shaft • Large, hardened, and precision-ground gears • Simple, smooth and precise speed and feed adjustment • Rapid traverse (longitudinal and cross) as standard for reduced non-productive time • Machine bed cast in one piece, extremely torsion-resistant and low-vibration for high precision turning Itsdpfx Aaoxl Dzajbjn Scope of delivery • 3-axis digital readout ES-12 V with LCD display • 3-jaw chuck PS3-250 mm / D8 • Faceplate 450 mm • Coolant system • Initial fill with Shell Tellus 46 • Fixed steady rest – max. diameter 150 mm • Travelling steady rest – max. diameter 110 mm • Quick-change toolpost with 4 holders • Safety device for quick-change toolpost • Motor with electromagnetic brake according to CE • Foot pedal with brake function according to CE • Slip clutch • Rapid traverse longitudinal and cross • Change gears • 2 centers • Reducing sleeve • Thread-chasing dial • LED machine lamp • Chip guard at rear • Operating tools

Condition: new, Bernardo Universal Lathe Solid 460 x 1500 Pro Technical Specifications Centre distance: 1500 mm Centre height: 230 mm Swing diameter over bed: 460 mm Swing diameter over gap: 690 mm Swing diameter over cross slide: 270 mm Bed width: 300 mm Spindle bore: 80 mm Spindle mount: DIN 55029, D1-8 Speed range (12 steps): 25 – 1700 rpm Longitudinal feed range (42 steps): 0.055 – 3.065 mm/rev Cross feed range (42 steps): 0.025 – 1.386 mm/rev Metric threads (41): 0.1 – 14 mm Inch threads (60): 2 – 112 TPI Quill diameter: 60 mm Quill travel: 130 mm Quill taper: MT 4 Motor power: 5.5 kW (7.5 HP) Machine dimensions (W x D x H): 2750 x 1080 x 1600 mm Weight approx.: 1845 kg Features - Modern main spindle bearing with precision angular contact ball bearings - Hardened and ground gears and shafts, including feed gearbox Itodpfx Aasxl Dyvsbon - Central, user-friendly control for feeds and threads with leadscrew and feed rod - Oversized, hardened and precision-ground gears - Simple, smooth, and precise speed and feed adjustment - Rapid traverse longitudinal and cross as standard to reduce non-productive times - One-piece, heavily ribbed machine bed for high torsional stiffness and vibration damping, providing the basis for accurate turning Scope of Delivery • 3-axis digital readout ES-12 V with LCD display • 3-jaw chuck PS3-250 mm / D8 • Face plate 450 mm • Coolant system • Initial fill with Shell Tellus 46 • Fixed steady rest – max. through-hole dia. 150 mm • Follow steady – max. through-hole dia. 110 mm • Quick-change tool post with 4 holders • Safety guard for quick-change tool post • Motor with magnetic brake conforming to CE standards • Foot pedal with braking function, CE compliant • Slip clutch • Rapid traverse longitudinal and cross • Change gears • 2 centre points • Reducing sleeve • Thread dial indicator • LED machine lamp • Chip guard rear wall • Operating tools

Condition: new, Bernardo Universal Lathe Smart 410 x 1000 Pro Technical Specifications Distance between centers: 1000 mm Center height: 210 mm Swing over bed: 420 mm Swing over gap: 580 mm Swing over cross slide: 255 mm Bed width: 250 mm Spindle bore: 52 mm Spindle mount: DIN 55029, D1 – 6 Spindle speed range (16): 45 – 1800 rpm Longitudinal feed range (17): 0.05 – 1.7 mm/rev Cross feed range (17): 0.025 – 0.85 mm/rev Metric threads (42): 0.2 – 14 mm Inch threads (45): 2 – 72 TPI Quill diameter: 50 mm Quill travel: 140 mm Quill taper: MK 4 Motor power: 3.0 / 4.5 kW Machine dimensions (L x W x H): 2070 x 900 x 1600 mm Weight approx.: 1220 kg Features • Prism bed made of grey cast iron, induction-hardened and precision-ground • Electromechanical foot brake for reducing non-productive times • Central, user-friendly control for feeds and threading with leadscrew and feed rod Itedpfx Aasxl Dx Eebsn • Modern main spindle bearings with precision angular contact ball bearings • Large-dimensioned, hardened and precision-ground gears • Hardened and ground gears and shafts, including in the feed gear box • Speed and feed settings are straightforward, smooth, and precise to operate • Adjustable tailstock for taper turning, handwheel with adjustable fine scale (0.02 mm) • Removable gap bridge allows machining of large-diameter workpieces Scope of Delivery • Prism bed made of grey cast iron, induction-hardened and precision-ground • Electromechanical foot brake for reducing non-productive times • Central, user-friendly control for feeds and threading with leadscrew and feed rod • Modern main spindle bearings with precision angular contact ball bearings • Large-dimensioned, hardened and precision-ground gears • Hardened and ground gears and shafts, including in the feed gear box • Speed and feed settings are straightforward, smooth, and precise to operate • Adjustable tailstock for taper turning, handwheel with adjustable fine scale (0.02 mm) • Removable gap bridge allows machining of large-diameter workpieces

Condition: new, Bernardo Universal Lathe Smart 410 x 1500 Pro Technical Specifications - Distance between centers: 1500 mm - Center height: 210 mm - Swing over bed: 420 mm Itedjxl Dwuopfx Aabjn - Swing over gap: 580 mm - Swing over cross slide: 255 mm - Bed width: 250 mm - Spindle bore: 52 mm - Spindle mount: DIN 55029, D1–6 - Speed range (16 steps): 45 – 1,800 rpm - Longitudinal feed range (17 steps): 0.05 – 1.7 mm/rev - Cross feed range (17 steps): 0.025 – 0.85 mm/rev - Metric threads (42): 0.2 – 14 mm - Inch threads (45): 2 – 72 TPI - Tailstock quill diameter: 50 mm - Tailstock quill travel: 140 mm - Tailstock taper: MT 4 - Motor power: 3.0 / 4.5 kW - Machine dimensions (L x W x H): 2570 x 900 x 1600 mm - Weight approx.: 1,400 kg Product Features • Prism bed made of grey cast iron, induction hardened and precision ground • Electromechanical foot brake for reduced auxiliary times • Central, user-friendly control for feeds and threading with lead and feed screw • Modern main spindle bearing with precision angular contact ball bearings • Large-dimensioned, hardened and precision-ground gears • Hardened and ground gears and shafts, including feed gearbox • Simple, smooth, and precise adjustment of speed and feeds • Adjustable tailstock for taper turning, handwheel with fine scale (0.02 mm) • Removable gap bridge for machining large-diameter workpieces Scope of Delivery • 3-axis digital readout ES-12 V with LCD display • 3-jaw chuck DK11-200 mm / D6 • Face plate 350 mm • Fixed steady rest – max. capacity 135 mm • Traveling steady rest – max. capacity 65 mm • Coolant device • Four-way tool post • Safety guard for tool post • Micrometer longitudinal stop • Slip clutch • Turret stop with fine adjustment • Thread indicator dial • Motor with electromagnetic brake, CE-compliant • Foot pedal with brake function, CE-compliant • Initial fill with Shell Tellus 46 • LED machine lamp • Change gears • Reducing sleeve • 2 dead centers • Chip guard • Service tools

Condition: good (used), Centre height: 195 mm Distance between centres: 1250 mm Max. swing diameter over bed/cross slide: 400/265 mm Iodsxlg Dwjpfx Aabetn Spindle mount/bore: Camlock D1-6"/54 mm Tailstock quill taper: MT 5 Spindle speeds steplessly adjustable in 3 ranges: 0 - 2500 rpm Longitudinal feeds: 0.018 - 1.2 mm/rev Cross feeds: 1/2 of longitudinal feeds 51 metric thread pitches: 0.2 - 14 mm 56 imperial (inch) threads: 2 - 56 TPI 20 module threads: 0.2 - 3.5 module 20 diametral pitch threads: 8 - 56 DP Electrical connection: 400 V, 7.5 kW Weight: 1500 kg Space requirement: 2500 x 1300 x 1300 mm

Condition: excellent (used), Year of construction: 2007, Technical data: Centre height: 500 mm Swing diameter: 1090 mm Swing diameter over cross slide: 690 mm Centre distance: 1500 mm Spindle speeds: 6 – 1250 rpm Spindle bore: 155 mm Digital position display: SONY Bed width: 700 mm Tool holder: MT 6 Motor power: 30 kW CE marking Dimensions (L x W x H): approx. 3500 x 1750 x 1900 mm Weight: approx. 7.5 t Accessories: Central lubrication Coolant system Rear splash guard Iedpfxoxlgmfe Aabotn 3-jaw chuck 500 mm 4-jaw chuck 800 mm The seller is not liable for typographical or data transmission errors. The machine’s condition regarding appearance, technical characteristics, and wear is in accordance with its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, Swing dia over bed 400 mm Swing dia over crosss slide 220 mm Between centers 1500 mm Spindle hole 50 mm Spindle speed 12,5 – 3150 rpm Spindle power 5,5 kW Power required 16 kVA Dimensions L x W x H = 2900 x 1000 x 2200 mm Itodjxiymtepfx Aabsn Weight cca 1600 kgs Accessories, features - 3 jaws chuck, D200 mm chuck - 4-fold tool holder - Tailstock - Display motor load - Rapid speed - Driwing system by clutch - Spindle break - Splash wall - Hardened and ground linear guides are in perfect condition - Steady rest - Coolant unit - Manual The machine is in great and original technical condition. It was barely used. No DRO system on it.

Condition: used, Year of construction: 1975, total length: 4,400 mm, total width: 1,450 mm, total height: 1,700 mm, Empty weight: 4.000 kg Itjdjxixh Nopfx Aabjn - Drive system: Conventional - Centre height [mm]: 230 - Swing over bed [mm]: 460 - Distance between centres [mm]: 2000 - Spindle bore [mm]: 70 - Min. spindle speed [rpm]: 7.1 - Max. spindle speed [rpm]: 1400 - Options: Three-jaw chuck, Quick-change tool post, Travelling steady, Fixed steady - Year: 1975 - Documentation available: Yes - Serial number: 1677 - Transport dimensions: 4400mm x 1450mm x 1700mm (l x w x h) - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: new, The KNUTH Roturn 400 M is a highly advanced CNC Slant Bed Lathe positioned within the 2-axis CNC Lathes group. This machine combines modern technology with robust design, featuring a rigid inclined-bed configuration that enhances stability and chip removal efficiency. Equipped with the Siemens 828 D Basic control, it meets comprehensive control technology requirements, providing you with precision performance. The Roturn 400 M includes a hydraulic 3-jaw chuck, a 12-station tool turret with driven tools for versatile applications, and precise linear guides for high accuracy even under heavy loads. Additionally, the machine boasts an automatic central lubrication system, including a hinged belt conveyor and a powerful coolant system to ensure optimal operation. The spacious enclosed workspace is easily accessible, designed for user convenience and safety. If you're looking for a reliable CNC Slant Bed Lathe, request a quote for the Roturn 400 M today to elevate your machining capabilities in the lathe category. Isdpsxhfugjfx Aabetn

Condition: new, Precision lead screw and feed screw lathe Manufacturer: GDW Itedpjxg Emysfx Aabon Model: LZ 400 V economyline Condition: New machine with stepless speed control to the highest safety standard Centre height: 200 mm Centre distance: 1,000 mm Spindle bore: 62 mm Standard configuration includes: -- 3-axis digital readout, 7" colour display with constant V feature - LED machine light, integrated into machine enclosure - Electromechanical limit switch system for threading and feed operations - Quick-change toolpost size B with turning tool holder - Main drive brake system (spindle brake) - Sliding chuck guard with interlock monitoring - Removable chip guard rear panel - Sliding splash guard - Extendable chip tray - Simple bed stop - Central lubrication system - Set of change gears (number of teeth: 21-33-84-120) - Reducing sleeve for main spindle inner taper ME 70/MK 4 - Protective flange for spindle nose DIN 55027-6 - Additional service socket - 2 fixed centres DIN 806-MK 3 - Set of operating tools, keys and oil gun - Spare shear pins - Operating manual with spare parts list and electrical documentation

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, spindle bore: 128 mm, turning diameter: 1,700 mm, turning diameter over bed slide: 1,300 mm, turning length: 6,000 mm, spindle speed (max.): 500 rpm, spindle speed (min.): 5 rpm, faceplate diameter: 1,250 mm, 1 pc. used lathe Manufacturer: STANKO Model: PT 317 - 6 Year of manufacture: 2002 Technical data: Swing diameter over bed: 1700 mm Swing diameter over cross slide: 1300 mm Center distance: 6000 mm Iodexgq Enepfx Aabotn Spindle bore: 128 mm 24 spindle speeds: 5 - 500 rpm Working feeds: 0.06 – 2.42 mm/rev Tailstock quill taper: 6 MT Drive power: 30 kW Machine weight approx.: 25,000 kg Space requirement (L x W x H): 9000 x 2275 x 2450 mm Accessories: -Complete electrical equipment 380 Volt -Rapid traverse -Faceplate 1250 mm -2 steadies -3 support stands -Digital readout -Tool holder

Condition: ready for operation (used), Year of construction: 1983, turning length 1500 mm turning diameter 475 mm Ijdpfx Aaoxfwc Rebetn turning dia. over face-slide 290 mm turning dia. in gap 655 mm turning speed range 14.0 - 2000 U/min feeds - longitudinal 0.05 - 0.736 mm/min spindle passage 61.0 mm tail stock MK 4 quill stroke 200 mm diameter of quill Ø 70.0 mm spindle head DIN 55022 GR 6 voltage 380 V total power requirement 7.5 kW weight 2400 kg range L-W-H 3080 x 1160 x 1485 mm From a maintenance workshop (university hospital) in good condition (!!) With original documentation + machine card Features: - Robust electric motor-driven conventional lathe - KLOPFER 4-jaw chuck Ø 200 - MULTIFIX steel holder with 3x inserts - Movable steel holder guard - Adjustable bed stop - Movable tailstock incl. center point - Swiveling machine light - Machine swing feet - Chip guard (movable from behind) - EMERGENCY stop button at the front - Original operating instructions + machine card

Condition: used, turning diameter over bed 370 mm turning diameter over slide rest 200 mm turning length 1000 mm centre height 185 mm spindle bore 56 mm tailstock quill taper MT 4 turning speeds 50 - 2000 U/min power capacity 4,0 kW weight of the machine ca. 1,4 t Itedpfx Aajxfwcksbon dimensions of the machine ca. 2,3 x 1,1 x 1,3 m Center lathe 200mm three-jaw chuck Size B Multifix tool post 3 Multifix tool holders Emergency stop device