Metaclay

Year of construction: 2024, condition: new, New /Unused 2024 Natural Gas Fired Auxiliary Boiler pre-assembled in a base frame (skid) Fuel Gas Pressure Reducing Station PRS, installed upstream the skid to reduce gas pressure from inlet pressure of 0.5 to 1.5 Bar (g) to 0.3 Bar (g). • Once-through type steam generator with single fuel burner, feedwater pumps, Ignition System and Flame Detection System, pressure safety valve, Steam water Separator etc. • Electrical Steam Super-Heater • Local Control Panel installed on the skid consisting of Burner Management System, Programmable Logic Controller PLC and motor starters • Chemical Dosing System • Atmospheric Blow Down Tank • Flue gas duct and stack installed outside the skid close to the Steam generator. Auxiliary Boiler is designed for: • Steam Flow: kg/s 1.2 • Steam Pressure: bar a 12 Nksdpfx Aeydmmkedwjt • Steam Temperature: 195°C • Design Pressure: Bar g24 • Design Temperature: 343°C • Design Code: ASME/Supplier Std.

Year of construction: 2021, condition: used, General information Field of application: Freight transport Nksdpfjydi Spjx Adwot Technical information Power: 220 kW (299 HP) Engine capacity: 7.698 cc Type of fuel: Diesel Transmission: Automatic Carrying capacity: 500 kg Condition General condition: good Technical condition: good Visual appearance: good Other information Vehicle's outer dimensions: 10x2,5x3,25 Production country: DE Additional information Please contact Christian Theißen for more information Manufacturer: Rosenbauer Model: L 32 A XS (DLK 23-12) Year of build: 2021 Condition: Used Data: First registration: 11/2021 Fuel type: Diesel Gear type: Automatic Drive type: Switchable 4WD (Allison Transmission) Engine power/displacement: 220 kW / 7.698 Max. working height: 32,00 m Max. platform height: 30,10 m Total permissible weight: 16.000 kg Empty weight: 910735: 14.275 kg / 910736: 14.305 kg Dimensions LxWxH: 10 x 2,5 x 3,25 m Colour: Red (RAL 3000), ladder set: anthracite Supports: individually controllable, continuous horizontal and vertical support, with ground pressure monitoring and axle locking Support width: min. 2,50 m / max. 4,80 m Number of axles: 2 Seats: 3 (1 driver seat and 2 passenger seats) Lighting: area lighting compliant with EN 1846T2 (LED type), top surface lighting (LED-bands), locker compartment lighting (LED-strips), 2x LED-headlights mounted to the basket and main operator station, 2 high performance LEDs located at the base and the sides of the rescue basket (forward shining) Ladder set: 5-section ladder, articulating arm, fully automatic, aluminum pipe permanently installed in the top ladder section, lifting lug at the basket fork, lifting eye enables usage of the ladder as a lifting device (lifting capacity: up to 4 tons at the lower section, up to 400 kg at the tip of the ladder) Payload: max. 500 kg (with basket), 600 kg (without basket) Max. basket load: 500 kg / 5 people Max. Wind force: 22 m/s Equipment: Rear view camera, cameras at the front and bottom of the rescue basket as well as the jib (enables surveillance of the presonnel inside the rescue basket when out of viewing range), color display inside the driver's cab and at the stabilizer control station, analogue load indicator located at the ladder set, automatic retraction of the ladder set, ARF (Automatic-Return-Function), active vibration dampening, TMS (Target-Memory-System), VRS (Vertical-Rescue-System) Special features: Warning lights and sirens, main operator station with display, foldable roof and heated seat, aluminum safety podium with 6 locker compartments with shutters for various equipment, rescue basket with detachable multi functional pillars and two anchor points for PFPE (Personal Fall Protection Equipment), 360°/infinitely rotatable stretcher mount can be attached at the bottom of the rescue basket, additional hose C-coupling at the rescue basket/monitor, CAN bus control, generator RS14, 400V motor for emergency operation of the turntable ladder, connectors for Motorola as well as Sepura, heated windschield wipers, radio Location: 41468 Neuss immediately available

Condition: ready for operation (used), empty load weight: 200 kg, total length: 900 mm, total width: 680 mm, total height: 1,360 mm, - drie aangedreven rollen - de twee onderste rollen zijn verstelbaar Njdpfx Adeydf Hiewjkt Dia rolls: 117/227 mm Dia of die mandrel: 30 mm Rotationspeed: 20 rpm Motorpower: 2 HP

Condition: used, power: 2 kW (2.72 HP), color: black, overall weight: 120 kg, Year of construction: 2018, Air output: 32200 m3/h Speed: Variable Waterreservoir: 180 L Nsdpfxeyddnre Adwskt Noise: 50db~70db Dimensions (cm): 186(H)×155(W)×81(D)cm Weight: 120 kg Power consumption: 1.35 kw ( 1250Watt ) If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Year of construction: 2018, condition: used, Field of application: Freight transport Serial number: VF640J565JB00xxxx Please contact ATS Norway for more information Please provide reference number upon request: 22251 Specifications: Mileage: 160,000 km Transmission: Automatic Steel suspension front, air suspension rear Engine brake 6 seats Only 1 previous owner Zepro tail lift, 1,500 kg Norka box body Good tires Changing room with lockers Webasto heater in changing room Interior length: 3.0 m Interior width: 2.43 m Interior height: 2.10 m Tow bar Reversing camera Webasto Radio/CD Climate control / AC Video available Full service history at Volvo Delivered with new service Ready for delivery Description: 2018 Renault crew cab truck with only 160,000 km.Equipped with changing room, 6 seats, storage cabinets and tail lift. Delivered with new service.Ready for delivery. HK: 245 Technical approved: Yes EU-approved until: 14.04.2026 Own weight: 6700 Total Weight: 12000 Payload: 5225 Width: 250 Length: 778 Euro: 6 Model: D Mannskapsbil m/ Skap – Løftelem – 6 seter – 160 000km! SE VIDEO Gearbox: Automatic Nkedpfx Ajyc Rmfodwet

Condition: good (used), Pump ready for operation Nksdpfx Adoycx Hgswst Capacity: 160 m3/h

Year of construction: 2017, operating hours: 200 h, condition: excellent (used), functionality: fully functional, Filtration line with the following pieces: -Membrane filter press -Squeezing pump -Feeding pump -Cloth washing pump -Cake washing pump -Belt conveyor -Walking platform Technical parameters of the filter press • compressing type: automatic hydraulic system • Plate shifting type: automatic plate shifted one by one • Feeding type: double feeding and center feeding • Filtration area: 500m2 • Chamber Qty: 80 • Chamber volume: 10m2 • Cake thickness: 40mm Plate type; recessed plate Filter plate size: 1000x1000x90/83mm Feeding pressure: Nkedpfeycqmfsx Adwjt

Year of construction: 2019, condition: used, Mileage: 30.000 km Field of application: Freight transport Serial number: WV1ZZZ7HZKH06xxxx Please contact ATS Norway for more information Please provide reference number upon request: 22154 Specifications: 2019 model Mileage: approx. 30,000 4x2 Tires (see pictures) 2 sets of tires Nodpfxoycpt Rj Adwjkt Rico equipment Rico FW100CT.2 Camera SR50axd Two tractors Smallest tractor: 110 mm Largest tractor: 1000-1500 mm rr Automatic raising and lowering on the largest tractor Hook for raising and lowering tractor Hook with lift Winch Remote control for the rear compartment Rear control panel Rear AC/climate Ready for delivery Description: 2019 Volkswagen Transporter road inspection truck with Rico equipment and two tractors. There is a control panel in the back of the car with AC and climate control. The car has been driven very little and according to the owner, the equipment has been used for perhaps 200-300 hours. Ready for delivery. Km: 30000 HK: 149 Technical approved: Yes EU-approved until: 02.05.2027 Own weight: 2180 Model: TRANSPORTER

Condition: ready for operation (used), power: 15 kW (20.39 HP), empty load weight: 5,200 kg, Punching line for flat iron and corners - CNC controlled (Siemens Sinumerik) - With CNC automatic length feeding system: 7000 mm - 4 punch stations 100 Ton – Cap: Ø 50 in 20 mm thickness - Movements: X=7000 mm, Y:760 mm - Max width: 750 mm - Max height: 20 mm in flat steel or 240 mm in U / I beams corners Punchingcapacity: 4 x 100 Ton each Nksdpfx Aoycmppodwst Dia x sheetthickness: Ø 39 x 20 mm / Ø 58 in 13 mm / Ø 90 x 8.5 mm Strokes/min: 10 -> 100 str/min Work level: 1075 mm

Condition: ready for operation (used), empty load weight: 1,300 kg, Bouw-/werkverplaatsingen (veelgenoemde waarden): X-as (longitudinaal): ~200–300 mm Y-as (dwars): ~200–400 mm Nsdpfx Adsycmn Sowskt Z-as (verticaal / hoogte): ~127–450 mm Tafel / opspanvlak (veel voorkomende afmetingen): ca. 600 × 430 mm of opspanvlak 250 × 700 mm 1.3 kW Speeds: 50-10 000 rpm

Condition: ready for operation (used), empty load weight: 1,050 kg, S1061 DE 0060 type BFM2011C 1500 tpm Generator 66 kVA Nedpfxeycmn Ej Adwskt Diesel Diesel-oil (1) -- Naphte (2) -- Electr (3): diesel Max output: 66 kVA voltage: 380V / 230v

Condition: ready for operation (used), Maximale diameter onderdeel: 200 mm Balansringprocedures volgens ISO 1940 PC-gebaseerde grafische interface Nsdpjycmnxsfx Adwokt HSK 63 Gereedschapsinstelling: 9BB4KP00002000 Softwareversie: R150F09 De BB 4000 is een dynamisch balanceerapparaat voor roterende onderdelen. Het ontmoet onbalans (massa × excentriciteit) terwijl het werkstuk draait en geeft exact aan: Hoeveel onbalans er is Waar de onbalans zit (hoekpositie) In welk vlak (links / rechts of enkel vlak) Een BB 4000 wordt typisch gebruikt voor: -Elektromotor-rotoren - Ventilatoren en blowers -Pompas-rotoren -Turbo -Rollen / assen / spindels make:: 230V Distance between centres :: 600 mm Weight of workpiece :: 20 Kg max

Condition: ready for operation (used), controller manufacturer: Heidenhain iTNC530, empty load weight: 1,70,000 kg, Zware portaalfreesmachine Type: FPM-50/200 - tussen kolommen: 3480 mm Njdpfx Aoycmnrjdwokt - met automatische indexeerfreeskop (elke 0,1° in beide vlakken) 27 kW / max. 6000 tpm / 660 Nm hogedrukkoeling via de spindel (17 bar) - 2 Heidenhain-operatorstations - gereedschapswisselaar met 120 posities - 2 spanentransportbanden - met koel- en filtereenheid en zelfreinigend systeem Als u de linker- en rechterkant van een werkstuk wilt bewerken, is de maximale breedte 3200 mm. In de huidige configuratie staat de tafel op de grond. Maar als je de tafel lager zet, kun je er ook hogere werkstukken op kwijt. Passage beween uprights: 3480 mm Longitudinal travel X-axe: 20 000 mm Cross travel Y-axe: 3800 mm Travel (height) Z-axe: 1350 mm Dimensions Clamping space - table: 20 000 x 2500 mm Max height of workpiece: 1750 mm (adjustable - according to table position) Power on spindle: 27 kW - 660 Nm Admission in millingheadspindle (ISO): ISO 50 Max speedrange: 10 > 6000 rpm Cooling system: yes Toolchanger: yes Number of tools: 120 positions

Year of construction: 2017, operating hours: 500 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 1632, HF suspended welding machine, 16KW, double electrode 15x1000mm, cooling unit included Nkjdpfxeycg T Ue Adwst

Year of construction: 2008, operating hours: 8,000 h, condition: used, machine/vehicle number: 508202292, The OCHSNER GMLW 19 (often referred to as "GMLW 19 plus") is a high-performance air-to-water split heat pump from the OCHSNER Golf series, suitable for heating and domestic hot water production in single-family and multi-family homes. It offers heating outputs around 17 kW (for example, 16.8 kW at L2/W35) and is designed for efficient operation with heating surfaces such as underfloor heating or radiators. The split design allows for space-saving installation while delivering high efficiency and low operating costs, even at low outdoor temperatures. Key features: - Type: Air-to-water split heat pump (separate indoor and outdoor units). - Series: OCHSNER Golf Maxi Plus. - Output: Heating capacity approx. 17 kW (e.g. 16.8 kW at L2/W35). - Heat source: Outdoor air. - Heat emission: Suitable for underfloor heating (low supply temperatures) and radiators. - Domestic hot water: Usually provided by the heat pump itself with an additional storage tank. - Efficiency: Achieves high efficiency levels even in colder conditions thanks to special evaporator technology. Njdpfxjybv Ure Adwokt - Installation: Easy installation due to the split design; does not require ground collectors. Areas of application: - Ideal for properties with a heated area of approx. 300-350 m². - Perfect for retrofits and new buildings, as it can be integrated with existing heating systems (underfloor heating, radiators). This is a used air source heat pump.

Year of construction: 2005, condition: used, Mileage: 198.500 km Field of application: Freight transport Serial number: WDB6703521N11xxxx Please contact ATS Norway for more information Please provide reference number upon request: 22186 Specifications: 2005 model EU approved until 01.07.2026 Km: approx. 198,500 150 hp Manual Tires (see pictures) Comes with summer tires Owner believes it is a 2 cubic meter water tank 1000L suction tank Solenoid valve is defective. Webasto not working Ready for delivery Description: 2005 Mercedes Vario wash truck with low mileage. The solenoid valve on the car must be replaced. Ready for delivery. Km: 198500 HK: 149 Technical approved: Yes EU-approved until: 01.07.2026 Nkedpfx Adoya Ua Dewet Own weight: 3640 Model: ANDRE Gearbox: Manual

Condition: used, Loading bridge 10 ton Length 12.90 Width 255/ total width 270. Nodeya Hlrjpfx Adwokt electrically adjustable District can also arrange your transport Ask about the possibilities

Year of construction: 2007, condition: used, GS International 10t Njdpsya Hdzefx Adwokt Bj 2007 L12 x b 2.12cm We can also organize your transport. Ask about the possibilities

Year of construction: 2024, operating hours: 500 h, condition: excellent (used), functionality: fully functional, AR30PROP-AVH Technology AIRLESS Guns: 2 Dimensions 1500x710x h980 mm Weight 162 Kg Additional: Gun wheal Laser guide Graco 2000 (green laser) Electric engine HONDA GXE2.0 2,4 HP (1,8 Kw) Nksdpfxjya Eccj Adwst Hand push Airless hydraulic piston pump 6,17 l/min 2 removable paint gun with nozzle for line 10-15 cm High-pressure paint filter Swivel front wheel Battery charger Additional battery as original.

Condition: new, Cyclone Dust, Chip, and Sawdust Extractor Separator CORMAK DC3300 3kW The DC3300 model from CORMAK is a high-performance and robust cyclone dust extractor, designed for efficient air purification in woodworking shops, furniture manufacturing plants, and metal processing facilities. With a cyclone separator, powerful radial fan, and advanced filtration system, the unit ensures effective separation of dust fractions and maintains consistently high operating efficiency over prolonged use. Nsdpoyaqvnsfx Adwekt

Condition: new, PJM pumps are designed for pumping clean and slightly contaminated water in water supply installations, booster sets, pump units, heating systems, and other installations, such as industrial systems. They can also be used for pumping other non-aggressive liquids that do not affect the materials the pump is made of. Nsdpfoyaqchox Adwskt

Condition: new, functionality: fully functional, power: 1.1 kW (1.50 HP), gearing type: other, fuel type: electric, Year of construction: 2026, Open-type cabin of professional construction, in very good condition, equipped with a high-efficiency ventilation system. It features a 1.1 kW electric motor running at 2800 rpm and a blower, providing a strong airflow of 2600 m³/h. The cabin is supplied with various accessories and is suitable for installation on different types of machinery and applications. Sturdy and reliable build for professional use, not a closed cabin. Dimensions: 1269 × 1367 × 2379 mm. Njdpfx Aeyapu Nsdwskt

Condition: used, With this offer, you are purchasing a used ‘Selecta Victoria’ vending machine. Item for sale: 1 x Selecta Victoria with the following features: Includes cooling system Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The machine has been tested to ensure it is in working order. Nksdoyam Awepfx Adwet Packaging and shipping: You are welcome to view the machine during our business hours. Please make an appointment to do so! Seaworthy packaging and worldwide shipping available on request! For more information, please feel free to contact us personally.

Year of construction: 2021, operating hours: 50 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 40667, Solvent recovery unit, model Di15Ax, ATEX-compliant (explosion-proof), with an actual load capacity of 15 liters per cycle. - The cycle is fully automatic; there is no need to monitor the machine, as it stops automatically at the end of each cycle. - This FORMECO unit is CE-certified. - Further technical specifications as detailed in the attached brochure. - Voltage: 220 V Includes a pack of 40 bags. Nsdpfxeyak Nbs Adwskt

Year of construction: 2021, condition: excellent (used), functionality: fully functional, The embossing station comes with: test stones (for wear inspection of embossing dies) / SolidStamp embossing dies max. 45HRC (1 pair) / SolidStamp embossing dies max. 35HRC (1 pair) / 1x center marker made of carbide / 1x workpiece stop / 1x pneumatic-hydraulic pressure intensifier / 1x protective shield / The base body was renewed in 04/2025. Raw parts up to 360 mm can be embossed. Nkjdoyaa U Hepfx Adwst