Robert Schotten

Condition: used, Unused DGM Environmental Technologies model DGH 500/600 granulator. Has approximately 636mm x 615mm feed opening. Unit has (5x2) knives fitted to rotor which measures approximately 500mm diameter x 600mm wide. Includes (2) stator knives and (1) block knife for wedge. Unit is driven by 55kw, 400volt, 50hz, 1480rpm motor. Unit has 10mm bottom screen fitted. Unit has hydraulic powerpack driven by 0.75kw, 400volt, 50hz, 1383rpm motor. Includes double bag off system with 7.5kw blower. Unit includes control panel. Also includes spare blades, rotor, stator and block. Codox Dfm Ujpfx Addsaa

Condition: used, Unused DGM Environmental Technologies model DGH 600/800 granulator. Has approximately 800mm x 700mm opening with feed hopper that has side opening of 970mm x 770mm. Unit has (5x2) knives fitted to rotor which measures approximately 600mm diameter x 800mm wide. Includes (2) stator knives and (2) block knives for wedge. Unit is driven by 75kw, 400volt, 50hz, 1480rpm motor. Unit has 10mm bottom screen fitted. Unit has hydraulic powerpack driven by 1.5kw, 400volt, 50hz, 1400rpm motor. Includes double bag off system with 7.5kw blower, spare knives and (1) spare screen. Unit includes control panel. Cedpfxjx Dfm Io Addeaa

Condition: ready for operation (used), Year of construction: 2020, operating hours: 8,950 h, functionality: fully functional, overall weight: 916 kg, total length: 1,200 mm, total width: 1,100 mm, total height: 2,000 mm, motor manufacturer: Atlas Copco, power: 55 kW (74.78 HP), fuel type: electric, volume flow: 650 m³/h, operating pressure: 13 bar, Equipment: documentation/manual, type plate available, Atlas Copco Screw Compressor Model: FA55VSD+ Cjdpfx Adex Dfmzedsaa Year of manufacture: 2020 Operating hours: 8,950 h Motor rated power: 55 kW Pressure: 4.0 to 13.0 bar Volume flow: 182.5 l/s or 10.9 m³/min Voltage/Frequency: 400 V / 50 Hz Dimensions (L/W/H): approx. 1,200 / 1,100 / 2,000 mm Weight: 900 kg The compressor is in excellent working condition and has been regularly inspected and maintained. It is currently still powered and can be viewed in operation. An associated air dryer and compressed air tank can be purchased optionally (see further listings).

Condition: ready for operation (used), Year of construction: 2020, operating hours: 6,683 h, functionality: fully functional, overall weight: 916 kg, total length: 1,200 mm, total width: 1,100 mm, total height: 2,000 mm, motor manufacturer: Atlas Copco, power: 55 kW (74.78 HP), fuel type: electric, volume flow: 650 m³/h, operating pressure: 13 bar, Equipment: documentation/manual, type plate available, Atlas Copco Screw Compressor Caodpfxjx Dfmus Addsa Model: FA55VSD+ Year of manufacture: 2020 Operating hours: 6,683 h Motor rated power: 55 kW Pressure: 4.0 to 13.0 bar Volume flow: 182.5 l/s or 10.9 m³/min Voltage/Frequency: 400 V / 50 Hz Dimensions (L/W/H): approx. 1,200 / 1,100 / 2,000 mm Weight: 900 kg The compressor is in perfect working condition and has been regularly inspected and serviced. It is currently still energized and can be viewed in operation. An associated air dryer and compressed air tank are available as optional extras (see other listings).

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 1,595 h, load capacity: 2,000 kg, lifting height: 1,730 mm, fuel type: electric, mast type: telescopic, construction height: 1,220 mm, fork length: 1,180 mm, drive type: Elektro, Operator Stand Forklift Load Center: 600 mm Mast Type: Telescopic Condition: Ready for operation and fully functional Technical Condition: Very good Front Tyre Type: Vulkollan Rear Tyre Type: Vulkollan Battery Voltage: 24V Battery Capacity: 375Ah Battery Manufacturer: Jungheinrich Battery Type: PzS Csdpfxjx Dfmns Addoaa Battery Year: 2019 Description: In addition to this machine, we offer other forklifts and warehouse equipment. All our machines are professionally serviced and inspected according to FEM 4.004 standards. Please contact us by email or phone. You can also find us under hsr-gabelstapler. We naturally also purchase your used equipment, without obligation to purchase a vehicle from us. Hire purchase and financing at attractive rates available on request. We are happy to provide comprehensive and professional advice on our vehicles. Features: Impulse control, initial lift, non-marking tyres, double-deck loading, joystick, seat.

Condition: new, sheet thickness: max. 30 (bei 280 MPa) / max. 22 (bei 360 MPa)total power requirements: 124weight approx.: 54000messurements (LxWxH): 8000 x 2300 x 4700CAPACITYMax. thickness (280 MPa) mm 30 Max. thickness (360 MPa) mm 22 Max. flat plate diameter mm 7000 Min. flanging diameter (ØD) mm 1700 Min. flanging diameter (with additional manual   device) (ØD) mm 1200 Flanging (knuckle) radius (r) mm 120-850 Max. head height (H) mm 1535 Max. torispherical head diameter (ØD) mm 6000 Max. elliptical head diameter (ØD) mm 5500 Total power kW 124 SIZELength mm 8000 Width mm 2300 Height mm 4700 Weight (Approx.) Ton 54    QUOTATION SCOPE OF SUPPLY & PRICING FMB 30x7000 FLANGING MACHINE Special steel and heat treated (one) knuckle roll – R100 mm Special steel and heat treated (one) flanging roll Hydraulic bottom support rollers adjustable in height Manual centralized auto-lubrication Control panel placed on the body Hydraulic (air) oil cooler Cedpfx Adjx Dfmhsdjaa Variable speed of rotation Automatic flanging feature (called CNC/NC by other manufacturers) Lightning for flanging area Telescopic and stainless protection cover sheet for bottom head holder channel Top and bottom head holders driven by hydro-motors Rear lifting cylinder Roll changing device

Condition: used, Year of construction: 1998, pallet roller conveyor 3450-1040-900 RA2442 Cjdpfx Adsx Dfmbsdoaa Pallet roller conveyor segment, continuous design length: 3450 mm Roller width (RB): 900 mm, Steel rolls Nominal/outer width (NB): 1040 mm roller distance / pitch 200 mm Overall height frame: 170/380 mm for pallet weight up to 1000 kg The shown supports are included in delivery. Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, Year of construction: 1998, pallet roller conveyor 1993-1040-900 RA2443 Pallet roller conveyor segment, continuous design length: 1993 mm Roller width (RB): 900 mm, Steel rolls Nominal/outer width (NB): 1040 mm roller distance / pitch 200 mm Caodpfxsx Dfl Re Addsa Overall height frame: 170/380 mm for pallet weight up to 1000 kg The shown supports are included in delivery. Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, Year of construction: 1998, pallet roller conveyor 1500-1040-900 RA2441 Pallet roller conveyor segment, continuous design length: 1500 mm Roller width (RB): 900 mm, Steel rolls Nominal/outer width (NB): 1040 mm roller distance / pitch 200 mm Overall height frame: 170/380 mm for pallet weight up to 1000 kg The shown supports are included in delivery. Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Caedpfsx Dfl Dox Addsa Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, Year of construction: 1998, pallet roller conveyor 580-1040-900 RA2440 Pallet roller conveyor segment, continuous design length: 580 mm Roller width (RB): 900 mm, Steel rolls Nominal/outer width (NB): 1040 mm roller distance / pitch 200 mm Overall height frame: 170/380 mm Cjdpfx Aex Dflwoddeaa for pallet weight up to 1000 kg The shown supports are included in delivery. Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, Year of construction: 1998, pallet roller conveyor 2100-1040-900 RA2439 Pallet roller conveyor segment, continuous design length: 2100 mm Roller width (RB): 900 mm, Steel rolls Nominal/outer width (NB): 1040 mm roller distance / pitch 200 mm Overall height frame: 170/380 mm for pallet weight up to 1000 kg The shown supports are included in delivery. Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik Csdpfxjx Dflqo Addsaa

Condition: ready for operation (used), Wagner Electro Magnetic Conveyor Belt Brand: Wagner 2 pieces on stock: *1x Length frame A-A = 2500 mm, Beltwidth: 1150 mm Cajdpfx Aex Dflksddsa Driving: 4 kW gearbox Dim. Block : 1150 x 1150 x 600mm Including rectifier. *1x Length frame A-A = 2600 mm, Beltwidth: 1200 mm Driving: 7 kW gearbox Dim. Block : 1700 x 1150 x 600mm Including rectifier.

Condition: ready for operation (used), Screening machine Flämrich for fine materials Brand: Flämrich Surface: 1600 x 600 mm – 1 Deck Cajdpfxex Dflds Addoa Driving: 4 kW E-Motor

Condition: used, Used stainless steel twin screw cooling conveyer by AMF (Apener Maschinenbau und Forderanlagen Gustav Bruns GmbH & Co KG) model HDS 250 x 3500. Machine has two stainless steel screws with total length 3500 mm and working length about 3000 mm. Screws are driven by el motor 1.1 kW and reducer. Working rotation of screws up to 2.7 rpm. Each screw has a internal channel and is connected to cooling medium. Working pressure inside the shafts - up to 1.5 bar, temperature range from -10C up to +30C, volume - 2 x 18 l. Screws are working in jacketed tank. Width of tank 570 mm x length 3500 mm. Tank has volume about 430 l and is working on atmospheric pressure. Temperature range from -10 up to 0C. Tank has stainless steel jacket at bottom and side walls. Volume of jacket 40 l, working pressure up to 1.5 bar, working temperature range - from -10C up to +30C. Top of the tank is equipped with 3 stainless steel lids, each with lenght 90 cm. Cover under the section where discharge is located is equipped with inspection manway with diameter 30 cm and stainless steel round lid. Inlet to conveyer has dimensions: 30 cm x 55 cm. Outlet has dimensions 28 cm x 30 cm. Machine has local control panel and is mounted on 4 wheels. Last time used in food industry. Cjdpfxox Dfk Ts Addeaa

Condition: used, Used vertical stainless steel (AISI 304) mixing tank by ZUGIL (Poland) with a working volume 10000 l. Inside dimensions: diameter 2600 mm x length of straight side of wall 2100 mm. Tank has top mounted 2 level paddle type agitator, driven by reducer and el. motor with power 2.2 kW, 380 volt 3/50 Hz. Working rotation of agitator up to 20 rpm. Agitator is supported at bottom. Mixing chamber is equipped with 4 baffles welded to the wall. Top flat, with bolted stainless steel cover, equipped with hinged inspection manway. Bottom, elipsoidal, welded, with central discharge outlet. Tank is mounted on (3) stainless steel legs. Last time used in chemical production. Specifications: Capacity: 10,000 L Diameter: 2,600 mm Height: 2,100 mm Type Of Heads: Top flat, bottom elipsoidal Vertical/Horizontal: Vertical Type of stainless: AISI 304 Legs/Lugs: 3 legs Caodpfx Adox Dfk Hedja

Condition: used, Used vertical stainless steel (AISI 304) mixing tank by ZUGIL (Poland) with a working volume 12500 l. Inside dimensions: diameter 2600 mm x length of straight side of wall 2550 mm. Tank has top mounted 2 level paddle type agitator, driven by reducer and el. motor with power 4 kW, 380 volt 3/50 Hz. Working rotation of agitator up to 18 rpm. Agitator is supported at bottom. Mixing chamber is equipped with 4 baffles welded to the wall. Top flat, with bolted stainless steel cover, equipped with hinged inspection manway. Bottom, elipsoidal, welded, with central discharge outlet. Tank is mounted on (3) legs carbon steel legs. Last time used in chemical production. Specifications: Capacity: 12,500 L Csdjx Dfkyspfx Addoaa Diameter: 2,600 mm Height: 2,550 mm Type Of Heads: Top flat, bottom elipsoidal Vertical/Horizontal: Vertical Type of stainless: AISI 304 Legs/Lugs: 3 legs

Condition: used, Used dissolver by Oliver+Batlle S.A.(ES) type DISPERMIX 50 designed for work on vacuum. Machine has non-corrosive shaft with working length 144.5 cm. Shaft is belt driven by el motor 40 kW, 1470 rpm, 380/660 V, 50 hz. Ex design of motor (ExeG). Mechanical adjustment of shaft rotation. Shaft is equipped with stainless steel toothed disc, with diameter 350 mm. Rising and lowering of agitator in range 110 cm and is driven hydraulically. Machine has also lid cover, with diameter 108.5 cm, for work on vacuum, rised and lowered by two hydraulical actuators. Together with mixer there are: Casdpjx Dfktefx Addea - vacuum pump Pfeiffer Vacuum model Hena 200, output up to 240 m3/h, driven by el motor 5.5 kW. - stainless steel mixing pan with volume 500 l. Mounted on 4 leg, no bottom discharge outlet. - local control panel integrated with two hydraulic devices. Specifications: Power: 40 kW

Condition: used, Used Brogtec (CH) model MH-8 stainless steel homogenizing mixer. Mixer has total volume of mixing chamber 10 l and working volume about 8 l. Tank is rising and lowering manually. Has bottom discharge outlet and possibility to discharge by manual tilt. Working pressure range - mixing chamber from vacuum till 29 PSI (2 bar). Heating jacket up to 43 PSI (3 bar). Working temperature range - mixing chamber from 32 - 250 F (-1 to 120 C). Heating jacket - from 89 - 250 F (31 - 120 C). Mixer is equipped with anchor with wall scrappers type agitator, vertical ribbon agitator and hi-speed homogenizing mill. Anchor and ribbon agitators are driven by gearbox and el motor 0.3/0.44 kW, 1660/3260 rpm, 460 V, 60 hz. Working rotation of vertical ribbon agitator is about 124 rpm, working rotation of anchor agitator - up to 62 rpm. Hi-speed homogenizing mill is belt driven by el motor 0.3/0.44 kW, 1660/3260 rpm, 460 V, 60 hz. Working rotations from 2755 up to 5379 rpm. Mixer is equipped with local vaccum pump and heating device by GMK type teco 60. Machine has local control panel. Cjdpfx Adex Dfkmodoaa

Year of construction: 2021, condition: ready for operation (used), - USED - TRAVELLING COLUMN MILLING MACHINE LONGITUDINAL TRAVEL: 4500 mm TRANSVERSAL TRAVEL: 1300 mm VERTICAL TRAVEL: 1800 mm RAPID FEEDS L-T-V: 35 m/min TABLE SIZE: 6000 x 1100 mm TABLE HEIGHT FROM FLOOR LEVEL: 850 mm SPINDLE: 20-4000 rpm; 37-43 kW; 900-1045 Nm; ISO 50 HEAD: MILLING AND BORING AXIAL HEAD TOOL MAGAZINE: CHAIN-TYPE ; 60 POS CONTROL UNIT: HEIDENHAIN TNC 640 Caodpfxjx Dfkgj Addsa WEIGHT: 24800 Kg OVERALL DIMENSIONS: 6970 x 4310 x 4150 mm ACCESSORIES: SWARF CONVEYOR ; LINEAR SCALES ; TOUCH PROBE NOTE: PIATTAFORMA OPERATORE

Condition: used, mileage: 65,000 km, power: 85 kW (115.57 HP), fuel type: diesel, gearing type: mechanical, first registration: 12/2019, emission class: euro6, color: white, Year of construction: 2019, Equipment: air conditioning, central locking, power assisted steering, sliding door, vehicle with some scratches certified mileage vehicle registered as a commercial truck internal load compartment dimensions: transfer of ownership not included in the price the vehicle is sold as seen, in its current condition, without warranty; possibility to extend warranty with paid policy test drive available customized financing available trade-in of used vehicle possible listed equipment may differ from actual features for information or appointments, WhatsApp or call Casdsx Dfkaopfx Addoa

Condition: used, mileage: 1,09,000 km, power: 70 kW (95.17 HP), fuel type: diesel, gearing type: mechanical, first registration: 10/2018, emission class: euro6, color: white, Year of construction: 2018, Equipment: air conditioning, central locking, power assisted steering, sliding door, vehicle with some scratches and hail dents Casdpfex Dfi Nox Addja certified mileage vehicle registered as N1 category commercial vehicle ownership transfer costs not included in the price vehicle sold as seen, without warranty; option for extended warranty available with paid insurance policy test drive possible customized financing options available trade-in of used vehicle accepted listed options may differ from those stated for information or appointments, please contact via WhatsApp or call the number

Condition: used, Used rotary tablet press by Kilian (DE) model T100/18 EU-B. Machine has 18 punches. Die dimensions: diameter 30.16 mm x height 22.22 mm. Working output from 5400 tablets up to 129600 tablets, depending on size, shape and product. Maximal tablet diameter 16 mm. Maximal filling up to 16 mm. Machine has hydraulical compression. Pre-compression force up to 60 kN. Main compression force up to 65 kN. Machine has local control panel and electric cabinet with work recording computer and printer. Technical documentation included with machine. Toolings not included. Caodpfx Aex Dfipeddoa

Condition: used, Used stainless steel lab size mobile fluid bed dryer by Glatt model GPCG-1. Working volume of drying chamber up to 4.5 l. Operating pressure 0.79 bar. Machine is equipped with two stainless steel cones - one for coating process, second for drying. Coating cone is also equipped with 4 stainless steel screens. Nozzle not included. Electric power supply for heating 4 kW. Working temperature range from 10 up to 140 C. Dryer is equipped with centrifugal fan driven by el. motor 2.2 kW, 2850 rpm, 220-230/380-400 V, 50 hz. Compressed air - pressure 6 bar. Casdox Dfiispfx Addja

Condition: used, Used stainless steel clarifying filter press by Seitz Orion type OF 100/150. Press has 154 stainless steel filter plates with dimensions 1000 mm x 1000 mm and two end plates. Filtration surface approx 310 m2. Machine has hydraulic closure. Mounted on stainless steel frame. Includes feeding connections, manometers and local control panel. Specifications: Material: Stainless steel Plate Size: 1000 mm x 1000 mm Cajdox Dficspfx Addea # of Plates: 154 stainless steel filter plates Eyes: 4 Plate Type: Clarifying Surface Area: 310 m2 Closure: Hydraulic

Condition: used, Used carbon steel grinding mill by Pallmann (Germany) model PR8. Mill has bolted rotor with diameter 795 mm and stator with diameter 800 mm. Belt driven by el. motor 100 kW, 1480 rpm, 380 V, 50 hz. Manual adjustment of gap between milling plates. Mill has mounted 5 nozzles for feeding gas or liquid inside the milling chamber. Front door bolted with central feeding inlet through feeding chute. Bottom discharge. Csdpfx Adox Dfh Ssdeaa