Hauer-Schmidt GmbH

Condition: good (used), Year of construction: 1972, functionality: fully functional, Drawing slide force: approx. 800 Mp Blank holder force (die cushion): 320 Mp Drawing slide stroke: 900 mm Blank holder stroke (die cushion): 400 mm Maximum distance between table and slide: 1920 mm Table size: 3200 x 2000 mm Clear opening on the loading side: 3250 mm Table height above floor level: 400 mm Overall height above floor level: 6300 mm Chsdpfj Ah Squex Aarjd Drive power: 100 hp Machine weight: 153 tons

Condition: good (used), Year of construction: 1982, functionality: fully functional, Hydraulic Try-Out Press (Four-Column Press) Pressing force: 3.000 kN Maximum slide stroke: 1,200 mm Table size: 2.600 x 1.300 mm Distance between columns: 2.050 mm (long side), 700 mm (short side) Maximum daylight (clamping surface to slide): 1.350 mm Minimum shut height: 250 mm Stroke speeds: Rapid traverse (downward): 140 mm/sec Rapid traverse (upward): 140 mm/sec Working speed: 16–50 mm/sec Chedpfxe Ah Sk Ij Aarjd Operating pressure: 300 bar Power requirement: 55 kW Tank capacity: 1.200 l Total weight: 55.000 kg Press height: 5.800 mm

Condition: excellent (used), Year of construction: 1982, machine/vehicle number: 1053, functionality: fully functional, power: 30 kW (40.79 HP), input voltage: 220 V, pressing force: 500 t, stroke length: 400 mm, table width: 900 mm, table length: 1,000 mm, distance table to ram: 400 mm, total length: 2,300 mm, total width: 1,800 mm, total height: 4,500 mm, overall weight: 18,000 kg, Equipment: documentation/manual, safety light barrier, Hydraulic press with arch frame, 500-ton capacity, with heated platen. Ceds Ahy Dgjpfx Aarehd The machine is in perfect condition, available for immediate sale, and can be inspected at our workshops in Peschadoires, France. Technical documentation is included with the press. You will find the photos of the press and the technical data sheet attached. Price available upon request.

Condition: good (used), Year of construction: 1990, Bending length: 14,000 mm Column width: 10,500 mm Control: CYBELECCNC 7000 with graphic Table width: 1,000 mm Distance between table and press beam: 1,800 mm Controlled axes: Y1; Y2; X1; X2 Cedpfx Aj Ahxl Usarshd Control system was renewed in 2012 Total power requirement: 75 kW Machine weight approx. min.: 465 t Space requirement approx.: 14,600 x 4,200 x 7,200 mm Additional information - Distance between table and press beam: 1,800 mm

Condition: like new (used), Year of construction: 1988, machine/vehicle number: 2240 & 2250, functionality: fully functional, power: 11 kW (14.96 HP), pressing force: 150 t, stroke length: 180 mm, operating speed: 12 mm/s, reverse speed: 160 mm/s, table width: 410 mm, table length: 540 mm, clearance between the columns: 300 mm, oil tank capacity: 300 l, total length: 1,010 mm, total width: 1,130 mm, total height: 2,435 mm, overall weight: 2,600 kg, Equipment: documentation/manual, Two EXNER 150T hydraulic presses are available for immediate sale and can be viewed at our workshop in Peschadoires, central France. Both presses are in excellent condition, as shown in the attached technical specifications and photos. Operating manual and technical documentation are available for each machine. Price upon request. Csdpfx Aas Ahq Dujrjhd

Condition: good (used), Year of construction: 1997, Hydraulic press, two-column press, oil hydraulic press, hydraulic press, high-speed press, high-speed hydraulic press, double-column press, single-column press -Manufacturer: Hans Schoen, Hydraulic press type TES/20 with safety device -Pressing force: 20 tons -Motor: 3 kW -Clamping table: 500 x 440 mm / Bore Ø 150 mm -Max. insertion height: 395 mm -Protrusion: 260 mm -Max. stroke: 250 mm -Hole: Ø 40 mm Chsdpj Ahghmsfx Aared -Operation: Two-hand operation / foot pedal -Safety device: Sick 14-FGS -Dimensions: 1340/1050/H2460 mm -Weight: 1740 kg

Condition: excellent (used), FOR SALE – INDUSTRIAL HYDRAULIC PRESS, SACK & KIESSELBACH Selling a SACK & KIESSELBACH hydraulic press, workshop identification number AE 7417. This is a robustly built machine, equipped with: • Work table with wedges and support pieces, as seen in the photos. Cjdo Aggbujpfx Aarshd • Control panel with analog gauges. • Separate hydraulic unit with a Siemens motor. • Protective housing around the work area.

Condition: ready for operation (used), Year of construction: 1981, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Cede Ad H Ttjpfx Aarehd Loading: December 1st to December 10th. TECHNICAL DETAILS GENERAL DATA Manufacturer: NEFF Type: RHS 25 Year of manufacture: 1981 Machine number: 3,786 PRESS DATA Press force: 25 t Table dimensions: 600 × 360 mm ELECTRICAL DATA Operating voltage: 380 V Frequency: 50 Hz Rated current: 35 A Connected power: 7.5 kW MACHINE DETAILS MACHINE DIMENSIONS Length: 1,600 mm Width: 1,200 mm Height: 2,100 mm Weight: 3,000 kg

Condition: used, Year of construction: 1998, machine/vehicle number: 845, functionality: fully functional, pressing force: 106 t, stroke length: 1,000 mm, table width: 1,200 mm, table length: 1,700 mm, table height: 650 mm, total length: 1,965 mm, total width: 2,645 mm, total height: 3,992 mm, overall weight: 12,500 kg, Equipment: documentation/manual, Hydraulic 4-column stamping press – 106 T – 1,700 × 1,200 mm For sale is a hydraulic 4-column stamping press from the manufacturer ALN with a maximum pressing force of 106 T. The machine has a table size of 1,700 × 1,200 mm, an open height of 1,450 mm, and a stroke of 1,000 mm, making it suitable for stamping, forming, straightening, inserting, and assembly work in industrial applications. ##### Technical data + information: Hydraulic 4-column stamping press – 106 T – 1,700 × 1,200 mm ==== General information - Reference ID: TPT-09 - Manufacturer: ALN - Type: Hydraulic 4-column stamping press - Model: 4 SPY 60 SO - Machine number: 845 - Year of construction: 1998 - Pressing force: 106 T - Table size (usable area): 1,700 × 1,200 mm - Table height: 650 mm - Open height: 1,450 mm - Stroke: 1,000 mm - Overall height: 3,992 mm - Overall width: 2,645 mm - Overall depth: 1,965 mm Chjdpfxo Ad H S Ae Aared - Total weight: 12.5 T - Basement required: no ==== Hydraulic cylinder - Max. working pressure: 243 bar - Return speed downwards: 250 mm/s - Return speed upwards: 280 mm/s - Initial pressing speed: 17.5 mm/s ==== Hydraulics & drive - Main motor: 25 kW - Oil tank: 650 l ==== Safety and equipment - Slug damping: yes - Maintenance platform: no ==== Documentation - Hydraulic diagram - Electrical diagram - Operating manual ##### Application areas: Stamping, forming, straightening, inserting, assembly work, toolmaking, mold making, metalworking, mechanical engineering, contract manufacturing, series production (Hydraulic 4-column stamping press, 4-column stamping press, hydraulic press, ALN press, 4 SPY 60 SO, 106 T press, 106-ton press, forming press, stamping press, straightening press, inserting press, assembly press, industrial press) Are you looking for a hydraulic press tailored to your specific application? Contact us for a customized offer. Our hydraulic presses are manufactured according to German and European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they comply with all points of the national Brazilian safety guideline NR 12, which is based on these. Our great strength lies in the design and manufacture of custom machines and press automation. We distribute tailor-made hydraulic presses at surprisingly competitive prices. For the hydraulics of the presses, we mainly use components from leading European manufacturers.

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS PRESS Pressing force: 40 t Drawing cushion force: 40 t WORK TABLE Csdpfx Ae Ad Hq Sjarehd Table dimensions: 700 × 630 mm Number of table slots: 3 MACHINE DETAILS Manufacturer: LAUFFER Machine type: Hydraulic press Length: 1,000 mm Width: 800 mm Height: 2,500 mm Weight: 10,000 kg

Condition: used, Year of construction: 1997, machine/vehicle number: 835, functionality: fully functional, pressing force: 200 t, stroke length: 400 mm, table width: 890 mm, table length: 1,460 mm, table height: 600 mm, total length: 1,800 mm, total width: 2,120 mm, total height: 3,550 mm, overall weight: 12,500 kg, Equipment: documentation/manual, Oil-hydraulic 4-column forming machine – 200 T – 1,460 × 890 mm For sale is an oil-hydraulic 4-column forming machine from August Luigart & Sohn GmbH u. Co. KG with a maximum pressing force of 200 T. The machine has a table size of 1,460 × 890 mm, a maximum installation height of 800 mm, and a stroke of 400 mm, making it suitable for forming, stamping, straightening, and assembly work in industrial applications. ##### Technical data + Information: Oil-hydraulic 4-column forming machine – 200 T – 1,460 × 890 mm ==== General information - Reference ID: TPT-08 - Manufacturer: August Luigart & Sohn GmbH u. Co. KG - Design: Oil-hydraulic 4-column forming machine - Model: 4 SPY 200 SO - Machine number: 835 - Year of construction: 1997 - Pressing force: 200 T - Rated force: 2,000 kN - Table size (working area): 1,460 × 890 mm - Table height: 600 mm - Open height: 800 mm - Installation height: 800 mm - Stroke: 400 mm - Ram width: 1,460 mm - Lateral passage: 450 mm - Total height: 3,550 mm - Total width: 2,120 mm - Total depth: 1,800 mm - Total weight: 12,500 kg - Max. upper tool weight: 2,500 kg ==== Hydraulic cylinder - Number of cylinders: 1 - Cylinder diameter: Ø 300 mm - Piston rod diameter: Ø 270 mm - Guide column diameter: Ø 160 mm - Stroke: 400 mm - Max. working pressure: 285 bar - Return speed downwards: 200 mm/s - Return speed upwards: 251 mm/s - Pressing speed: 37–11 mm/s - Setting speed: 10 mm/s ==== Hydraulics & Drive - Main motor: 32.5 kW - Oil tank: approx. 850 l - Hydraulic oil: HL / HLP ISO VG 46 - Oil filter fineness: < 25 µm - Max. oil temperature: 60 °C - Vibration damper: EFFBE LM 7-100 - Foundation according to manufacturer's specifications required ==== Tooling - Number of T-slots: 5 - T-slots: T22 M20 according to DIN 650 ==== Control - Control: no PLC - Control panel: on the frame - Light curtain / light barrier: available - Two-hand operation: available ==== Safety - Decay time: 82 ms - Decay distance: 164 mm - Safety distance: 13 mm - Protective grid: available - CE-compliant design ==== Electrical connection - Operating voltage: 415 V - Power supply: 3PEN - Frequency: 50 Hz - Conductor cross-section: 25.0 mm² - Fuse rating: 80.0 A - Rated current: 64.2 A - Control voltage: 230 V AC - Valve voltage: 24 V DC Chodpfx As Ad Haysarod ==== Environmental conditions - Ambient temperature: +5 to +40 °C - Relative humidity: 30–95 % (non-condensing) - Installation altitude: max. 1,000 m above sea level - Noise level: < 70 dB(A) ##### Application areas: Forming, stamping, straightening, embedding, assembly work, toolmaking, mold making, metalworking, mechanical engineering, contract manufacturing, series production (Oil-hydraulic 4-column forming machine, 4-column forming machine, hydraulic press, August Luigart press, 4 SPY 200 SO, 200 T press, 200 ton press, forming press, stamping press, straightening press, embedding press, industrial press)

Condition: used, Year of construction: 2008, machine/vehicle number: 240-124, functionality: fully functional, pressing force: 160 t, stroke length: 800 mm, table width: 1,600 mm, table length: 1,200 mm, table height: 650 mm, total length: 1,900 mm, total width: 3,600 mm, total height: 3,300 mm, Equipment: documentation/manual, Hydraulic sub-platen press – 160 T – 1,200 × 1,600 mm For sale is a hydraulic sub-platen press from the manufacturer LÄPPLE with a maximum pressing force of 160 T. The machine has a table size of 1,200 × 1,600 mm, an open height of 1,050 mm, and a stroke of 800 mm, and is particularly suitable for forming, straightening, pressing, and assembly work in industrial applications. The press is equipped with a PILZ control system and has an electrical version for operation on a 3 × 400 V AC power supply. ##### Technical data + information: Hydraulic sub-platen press – 160 T – 1,200 × 1,600 mm ==== General information - Reference ID: TPT-07 - Manufacturer: LÄPPLE - Type: Hydraulic sub-platen press - Model: TV1600-50 - Machine number: 240-124 - Year of manufacture: 2008 - Pressing force: 160 T - Table size (working area): 1,200 × 1,600 mm - Table height: 650 mm - Open height: 1,050 mm - Stroke: 800 mm - Overall height: 3,300 mm - Overall width: 3,600 mm - Overall depth: 1,900 mm - Basement required: no ==== Hydraulic cylinder - Max. working pressure: 240 bar - Idle travel downwards: 10 mm/s - Idle travel upwards: 28 mm/s - Initial pressing speed: 10 mm/s ==== Hydraulics & drive - Main motor: 22 kW ==== Control system - Control system: PILZ - Control panel: on the frame - Electrical design: EPLAN 5.40 - Electrical documentation: wemascon Zeulenroda GmbH ==== Safety - Safety control system: PILZ - Light curtain / light barrier: available - Two-hand operation: available - CE-compliant design - Slug damping: no - Maintenance platform: no ==== Electrical connection - Main supply: 3 × 400 V AC - Frequency: 50 Hz - Power supply: PE/N Cjdpfxj Ad Anto Aarehd - Fuses: 63 A - Rated current of the system: 47 A - Control voltage: 24 V DC ##### Application areas: Forming, straightening, pressing, assembly work, toolmaking, mechanical engineering, metal processing, maintenance, pressing operations, series production (Hydraulic sub-platen press, sub-platen press, hydraulic press, LÄPPLE press, LÄPPLE TV1600-50, 160 T press, 160-ton press, forming press, straightening press, pressing press, assembly press, industrial press) Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German Machinery Directive and European Machinery Directive (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they comply with all points of the national Brazilian safety guideline NR 12, which is based on these. Our great strength lies in the design and manufacture of customized machines and press automation. We distribute tailor-made hydraulic presses at surprisingly favorable prices. For the hydraulics of the presses, components from leading European manufacturers are mainly used.

Condition: used, Year of construction: 2013, machine/vehicle number: 1584.18, functionality: fully functional, pressing force: 160 t, stroke length: 700 mm, table width: 2,000 mm, table length: 1,400 mm, table height: 800 mm, total length: 2,000 mm, total width: 3,200 mm, total height: 5,000 mm, overall weight: 28,000 kg, Equipment: documentation/manual, Hydraulic 4-column press – 160 T – 2,000 × 1,400 mm For sale is a hydraulic 4-column press from the manufacturer HYMAG with a maximum pressing force of 160 T. The machine has a table size of 2,000 × 1,400 mm, a maximum installation height of 1,200 mm, and a stroke of 700 mm, making it suitable for forming, straightening, upsetting, and assembly operations in industrial applications. ##### Technical data + information: Hydraulic 4-column press – 160 T – 2,000 × 1,400 mm ==== General information - Reference ID: TPT-06 - Manufacturer: HYMAG - Design: Four-column press - Model: HS 4-160 K - Machine number: 1584.18 - Year of manufacture: 2013 - Pressing force: 160 T - Rated force: 1,600 kN - Table size (working area): 2,000 × 1,400 mm - Plunger plate size: 2,000 × 1,400 mm - Table height: 800 mm - Open height: 1,200 mm - Stroke: 700 mm - Front clearance: 2,010 mm - Side clearance: 900 mm - Overall height: 5,000 mm - Overall width: 3,200 mm - Overall depth: 2,000 mm - Total weight: 28 T - Basement required: no ==== Hydraulic cylinder - Stroke: 700 mm - Max. working pressure: 305 bar - Return speed (downward): 220 mm/s - Return speed (upward): 150 mm/s - Pressing speed: 45 mm/s ==== Hydraulics & Drive - Main motor: 55 kW - Additional hydraulics: 7.5 kW - Oil tank: 500 l - Hydraulic oil: ISO VG 46 - Pump type, main unit: V30D-115-RKN - Pump type, additional hydraulics: PGH4-2X/025 - Oil-air cooler: TFS/A-20-400 - Stepless pressure control via proportional valves - Stepless speed control via proportional valves - Actual pressure display in the PLC - Quick traverse cylinder with after-suction/locking valve - Oil-air cooler with its own circulation pump (45/75 °C) - Additional hydraulics: 130 bar - 2 double-acting tool cylinders - Tool cylinder speed: approx. 50 mm/s at Ø 100 mm ==== Tooling - T-slots: 9 - T-slot design: M20 according to DIN 650 ==== Control system - Control: Siemens SIMATIC C7 - Control panel: on the frame - Stepless pressure control - Stepless speed control ==== Safety - Light curtain/light barrier: available - Two-hand operation: available - Safety control: available - CE-compliant design - Dwell time: 70 ms - Dwell travel: 118 mm ==== Electrical connection - Operating voltage: 400 V Cjdpo Adz Ulefx Aarjhd - Main motor current consumption: 105 A - Main motor speed: 1,450 rpm - Additional hydraulics voltage: 400 V - Additional hydraulics power: 7.5 kW - Additional hydraulics current consumption: 15 A - Cooling motor power: 1.5 kW - Cooling motor voltage: 400 V - Cooling motor current consumption: 5.1 A ##### Application areas: Forming, deep drawing, straightening, upsetting, assembly work, toolmaking, mold making, mechanical engineering, metalworking, contract manufacturing, series production (Hydraulic 4-column press, four-column press, 4-column press, hydraulic press, HYMAG, HYMAG HS 4-160 K, 160 T press, 160 ton press, forming press, deep drawing press, straightening press, upsetting press, assembly press, industrial press)

Condition: used, Year of construction: 1994, machine/vehicle number: 10353, functionality: fully functional, pressing force: 153 t, stroke length: 700 mm, table width: 1,300 mm, table length: 1,800 mm, total width: 4,870 mm, total height: 4,830 mm, overall weight: 27,000 kg, Equipment: documentation/manual, Hydraulic double-column press – 153 T – 1,800 × 1,300 mm For sale is a hydraulic double-column press from Maschinenfabrik Exner GmbH & Co. KG with a maximum pressing force of 153 T. The machine has a table size of 1,800 × 1,300 mm, an open height of 1,200 mm, and a stroke of 700 mm, making it suitable for forming, straightening, pressing, and assembly operations in industrial applications. ##### Technical Data + Information: Hydraulic double-column press – 153 T – 1,800 × 1,300 mm ==== General Information - Manufacturer: Maschinenfabrik Exner GmbH & Co. KG - Design: Hydraulic double-column press - Model: EX SBR 150 - Machine number: 10353 - Year of manufacture: 1994 - Pressing force: 153 T - Rated force: 1,500 kN - Table size (usable area): 1,800 × 1,300 mm - Open height: 1,200 mm - Stroke: 700 mm - Overall height: 4,830 mm - Overall width: 4,870 mm - Total weight: 27 T - Basement required: no ==== Hydraulic Cylinder - Number of cylinders: 1 - Cylinder diameter: Ø 320 mm - Stroke adjustment: 300 mm - Stroke rate: 300 strokes/h - Retraction force: 175,000 N - Max. working pressure: 320 bar ==== Hydraulics & Drive - Main motor: 30 kW - Auxiliary hydraulics: 15 kW - Cooling motor: 7.5 kW - Stroke adjustment motor: 1.5 kW - Fan motor: 0.18 kW - Main motor speed: 1,460 rpm - Total power consumption: 46.68 kW - Oil tank: 1,300 l - Oil type: ISO VG 46 - Air-oil cooler: yes - Lubrication pump: Motor-driven lubrication pump ==== Tooling - Number of T-slots: 4 - T-slot width: 22 mm - T-slot spacing: 500 mm - Thickness of clamping plates: 150 mm - Additional clamping plate: yes - Tool protection / tool securing: yes ==== Guidance - Guidance: 8-way - Ram locking / catch mechanism: 2-way ==== Control System - Control system: PLC / programmable control console - Operating panel: Control console ==== Safety - Snap-off damping Chsdpfxo Advkuj Aarjd - Follow-up travel: 48 mm - Follow-up time: 135 ms - Safety distance: 216 mm - Light curtain / light barrier - Protective grating - Separate control cabinet ==== Electrical Connection - Operating voltage: 400 V - Frequency: 50 Hz ##### Application areas: Forming, straightening, pressing, assembly operations, toolmaking, mold making, mechanical engineering, metalworking, steel construction, contract manufacturing, heavy industry, series production (Hydraulic double-column press, double-column press, hydraulic press, EXNER press, Maschinenfabrik Exner, EX SBR 150, 153 T press, 153-ton press, forming press, straightening press, assembly press, industrial press) Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German and European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they comply with all aspects of the Brazilian national safety directive NR 12. Our strength lies in special machine construction and press automation. We distribute customized hydraulic presses at surprisingly affordable prices. Predominantly, components from leading European manufacturers are used for the hydraulics of the presses.

Condition: ready for operation (used), Year of construction: 1985, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS GENERAL DATA Manufacturer: Schoen Type: SH/LF100 Year of manufacture: 1985 Machine type: Hydraulic press PRESS Pressing force: 100 t Chsdpfx Ae Adu Ryoared Table dimensions: 1,200 × 1,200 mm MACHINE DETAILS DIMENSIONS AND WEIGHT Length: 3,000 mm Width: 2,000 mm Height: 3,200 mm Weight: 12,000 kg

Condition: used, Year of construction: 2008, machine/vehicle number: 1540.18, functionality: fully functional, pressing force: 160 t, stroke length: 700 mm, table width: 2,000 mm, table length: 1,400 mm, table height: 800 mm, total length: 2,000 mm, total width: 3,200 mm, total height: 5,200 mm, overall weight: 28,000 kg, Equipment: documentation/manual, Hydraulic 4-column press – 160 T – 2,000 × 1,400 mm For sale is a hydraulic 4-column press from the manufacturer HYMAG with a maximum pressing force of 160 T. The machine has a table size of 2,000 × 1,400 mm, an open height of 1,200 mm, and a stroke of 700 mm, making it suitable for forming, straightening, pressing, insert molding, and assembly operations in industrial applications. ##### Technical data + information: Hydraulic 4-column press – 160 T – 2,000 × 1,400 mm ==== General information - Manufacturer: HYMAG - Type: Hydraulic 4-column press - Model: HS 4-160K - Machine number: 1540.18 - Year of manufacture: 2008 - Pressing force: 160 T - Table size (working area): 2,000 × 1,400 mm - Table height: 800 mm - Open height: 1,200 mm - Stroke: 700 mm - Overall height: 5,000 mm - Overall width: 3,200 mm - Overall depth: 2,000 mm - Overall weight: 28 T - Basement required: no ==== Hydraulic cylinder - Stroke: 700 mm - Max. working pressure: 280 bar - Return speed downwards: 220 mm/s - Return speed upwards: 150 mm/s - Initial pressing speed: 45 mm/s ==== Hydraulics & drive - Main motor: 55 kW - Auxiliary hydraulics: 7.5 kW - Oil tank: 600 l - Pneumatic pressure accumulator: yes ==== Control - Control: SIEMENS SIMATIC C7 Codpfxo Adtl Ao Aarohd - Control panel: pendant control panel - Two-hand operation ==== Safety - Blanking force limitation - Maintenance platform - Emergency stop - Light curtain / light barrier - Protective grating - Separate control cabinet ##### Application areas: Forming, deep drawing, straightening, insert molding, assembly work, toolmaking, mold making, mechanical engineering, metalworking, contract manufacturing, series production (Hydraulic 4-column press, 4-column press, hydraulic press, HYMAG, HYMAG HS 4-160K, 160 T press, 160 ton press, forming press, deep-drawing press, straightening press, insert molding press, assembly press, industrial press) Are you looking for a hydraulic press tailored to your specific application? Contact us for a customized quote. Our hydraulic presses are manufactured according to German and European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they meet all points of the national Brazilian safety guideline NR 12, which is based on them. Our core strength lies in the design and construction of custom-made machines and press automation. We distribute customized hydraulic presses at surprisingly affordable prices. Predominantly, components from leading European manufacturers are used for the hydraulics of the presses.

Condition: used, Year of construction: 1998, machine/vehicle number: 844, functionality: fully functional, pressing force: 61 t, stroke length: 1,000 mm, table width: 1,200 mm, table length: 1,700 mm, table height: 640 mm, total length: 1,965 mm, total width: 2,645 mm, total height: 3,992 mm, overall weight: 12,000 kg, Equipment: documentation/manual, Hydraulic 4-column stamping press – 61 T – 1,700 × 1,200 mm For sale is a hydraulic 4-column stamping press from the manufacturer ALN August Luigart & Sohn GmbH & Co. KG with a maximum pressing force of 61 tons. The machine has a table size of 1,700 × 1,200 mm, a maximum installation height of 1,350 mm, and a stroke of 1,000 mm, making it suitable for stamping, forming, straightening, and assembly operations in industrial applications. ##### Technical Data + Information: Hydraulic 4-column stamping press – 61 T – 1,700 × 1,200 mm ==== General Information - Manufacturer: ALN August Luigart & Sohn GmbH & Co. KG - Type: Oil-hydraulic 4-column stamping press - Model: 4 SPy 60 SO - Machine number: 844 - Year of manufacture: 1998 Chedpfj Adrzcex Aarod - Pressing force: 61 T - Rated force: 600 kN - Table size (working area): 1,700 × 1,200 mm - Ram plate size: 1,700 × 1,200 mm - Table height: 640 mm - Open height: 1,450 mm - Installation height: 1,350 mm - Stroke: 1,000 mm - Front opening: 1,700 mm - Side opening: 850 mm - Installation width front/rear: 1,700 mm - Installation width side: 850 mm - Tool upper part weight max.: 1,200 kg - Total height: 3,992 mm - Total width: 2,645 mm - Total depth: 1,965 mm - Total weight: 12 T - Basement required: no ==== Hydraulic cylinder - Number of cylinders: 1 - Cylinder diameter: Ø 180 mm - Piston rod diameter: Ø 160 mm - Guide column diameter: Ø 125 mm - Stroke: 1,000 mm - Max. working pressure: 236 bar - Return speed downwards: 250 mm/s - Return speed upwards: 280 mm/s - Initial pressing speed: 17.5 mm/s - Setup speed: 10 mm/s ==== Hydraulics & Drive - Main motor: 25 kW - Oil tank: 650 l - Oil type: HLP ISO VG 46 - Oil filter fineness: < 25 µm - Operating temperature max.: 60 °C - Pneumatic pressure accumulator: yes ==== Tooling - T-slots: 5 - T-slots according to DIN 650 / T22 M20 ==== Control System - Control: SIEMENS SIMATIC Touch Panel - Control panel: on the frame - Two-hand operation - Valve voltage: 24 V DC - Control voltage: 230 V AC ==== Safety - Stroke end damping - Follow-up stroke: 26 mm - Follow-up time: 113 ms - Safety distance: 228 mm - Emergency stop - Light curtain / light barrier - Protective grid - Separate control cabinet - Maintenance platform: no ==== Electrical Connection - Operating voltage: 415 V - Frequency: 50 Hz - Power supply: 3PEN - Connection cable: 16 mm² - Fuse: 63 A - Main motor current consumption: 48 A - Noise level: < 70 dB(A) ##### Application areas: Stamping, forming, straightening, press-fitting, assembly operations, toolmaking, mold making, metalworking, mechanical engineering, contract manufacturing, series production (Hydraulic stamping press, 4-column stamping press, oil-hydraulic stamping press, hydraulic press, hydraulic press, ALN press, August Luigart press, 4 SPy 60 SO, 61 T press, 61-ton press, forming press, stamping press, straightening press, assembly press, industrial press)

Condition: used, Year of construction: 2008, functionality: fully functional, used lathe Manufacturer: Pfeiffer Csdpfxs Aarras Aarshd

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, power: 9 kW (12.24 HP), input frequency: 50 Hz, type of input current: three-phase, pressing force: 160 t, stroke length: 800 mm, operating speed: 120 mm/s, ram plate width: 1,000 mm, ram plate length: 1,800 mm, overall weight: 5,800 kg, Equipment: CE marking, Boschini OB 18/10 160t hydraulic press in like-new condition Manufacturer: Oleodinamica Boschini Model: OB 18/10 160 Year of manufacture: 2019 Codpfxoz T R Emo Aarshd Table size: 1800x1000 mm Max. speed: 120 mm/s (adjustable) Stroke length: 800 mm Pressing force: 160 tons Maximum pressure: 250 bar Power: 9.2 kW, 400 V/50 Hz Overall dimensions: 2500x1400x2950 mm Net weight: 6 t

Condition: ready for operation (used), Year of construction: 1997, input voltage: 415 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 40 t, operating speed: 7 mm/s, reverse speed: 50 mm/s, table length: 4,000 mm, throat depth: 500 mm, total length: 4,200 mm, total width: 1,800 mm, total height: 2,500 mm, overall weight: 11,000 kg, year of last overhaul: 2026, Equipment: documentation/manual, safety light barrier, CNC Megoform PB 40-130 Upstroke press brake. Cjdpfx Ajz Tdbhjarjhd Serial Number 0622183 - 25/09/97 4000 mm (4 meters) working bed length. Tonnage / Capacity: 135-ton capacity Daylight (without tools) 340mm Side frame throat depth 500m Advance speed 37mm/s Working speed 7.5mm/s Return Speed 50mm/s Approx weight 11,000 Kgs Shipping dimensions L 4400mm , W 1800mm , H 2500mm Hurco auto bend 7 cnc controller X & R axis auto set , Z axis manual set Light guard

Condition: good (used), Year of construction: 1979, functionality: unexamined, pressing force: 40 t, overall weight: 5,000 kg, Equipment: safety light barrier, SHC 40 Hans Schoen Chodpez S E S Sjfx Aarsd

Condition: used, Year of construction: 2001, pressure 200 t table surface area 1600 x 1300 mm ram stroke 600 mm dayligth 900 mm die cushion capacity 80 t die cushion stroke 150 mm die cushion area 1200 x 750 mm Chjdpsz St Izefx Aarod distance between columns 1650 mm table height over floor 1060 mm ram surface 1600 x 1300 mm oil volume 1400 l height over floor 3500 mm rapid drop speed 400 mm/sec drawing speed 42 (80 to) mm/sec drawing speed 20 (200 to) mm/sec return speed 325 mm/sec Control Siemens total power requirement 75 kW weight of the machine ca. 20 t Machine is with cushion in table (80 t), light guards and Siemens control for presses.

Condition: like new (used), functionality: fully functional, pressing force: 250 t, total height: 4,800 mm, overall weight: 14,000 kg, Intemach TURI 250-H 250-ton hydraulic press. Own weight is 14 tons, height is 4.8 meters. Table size: 1400 x 900 mm Main engine: 37 kW Auxiliary cylinder: 80 x 50 mm diameter Master cylinder: 340 mm diameter Ram stroke: 600 mm Chodpfx Aaoz Rprtersd Working speed: 2 – 20 mm/sec

Condition: ready for operation (used), Year of construction: 1973, machine/vehicle number: 22123, functionality: fully functional, pressing force: 315 t, table width: 1,500 mm, table length: 2,500 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Pressing force: 315 t Table width: 1,500 mm Codpfx Aez Izcwearjhd Table length: 2,500 mm Maximum working area: 883 mm MACHINE DETAILS Dimensions: 3.0 m x 1.6 m x 4.5 m EQUIPMENT Separate hydraulic unit Control panel

Condition: excellent (used), Year of construction: 2008, machine/vehicle number: 461/08, functionality: fully functional, For sale: Energo hydraulic NC press - Type: GTVS 400 NC - Year of manufacture: 2008 - Serial no.: 461/08 Cjdoz Iymnepfx Aarehd The hydraulic press is in like-new condition. It has 5,000 operating hours and has been used at minimal pressures, with a maximum force of 50 tons. It has been regularly serviced by the manufacturer, Energo. It offers high precision, with a ram depth accuracy of 0.01 mm and the capability for multi-step simultaneous programming, allowing you to set the depth, pressure, and pressing speed. It is connected to the power supply and ready for operation.