Sd Meca

Condition: used, Year of construction: 2007, Mazak Nexus HCN 6000-II Twin Pallet Horizontal Machining Centre. S/No. 196442 (2007) with Mazatrol Matrix Nexus Control, Pallet Size 500 x 500mm, 60 Position ATC, High Pressure Coolant & Filtration System, Through Spindle Coolant, Spindle Speed 7000rpm, Spindle Taper CAT40, Rinishaw Tool Setter, Swarf Conveyor. Please Note: Back-End Spindle Tool Holders Only, Consumable Tools Not Included. Country of Origin: Japan Cjdpsyzhfdsfx Agfera Location: This lot is located in Bornago, Italy. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 2008, Mazak Integrex E500H-II x 3000 Multi-Tasking CNC Lathe. S/No. 204074 (2008) with Mazatrol Matrix Control, Maximum Cutting Diameter 820mm, Maximum Cutting Length 3048mm, C Axis 0.0001 degrees, B Axis -30/+210 degrees, 40 ATC, Spindle Speed 1,600rpm, Milling Speed 10,000rpm, Main Spindle 37Kw, Spindle Taper din50, Y axis -/+ 250mm, Fixed Steady, Swarf Conveyor Codpfxeyzhc Ne Agfera Please Note: There are no loading facilities on site, dismantling and loading will be at the cost of the purchaser. Location: These lots are located in Birmingham & Wolverhampton, UK. Please Note: There are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.

Condition: used, Year of construction: 2018, operating hours: 9,078 h, machine/vehicle number: IntNr231546, CNC Lathe HYUNDAI WIA L230 LMSA, Year 01_2018 Control: FANUC Swing diameter: 600 mm Max. turning diameter: 310 mm Turning diameter over support: 355 mm Spindle bore: 78 mm Bar capacity: 65 mm Spindle speed range: up to 4,000 rpm Max. turning length: 521 mm Z-axis travel: 560 mm X-axis travel: 220 mm Turret: 12 stations Codoyzg Iqopfx Agfera Control: Fanuc i C-axis resolution: 0.001° Sub spindle speed: up to 5,000 rpm W-axis travel: 590 mm Total connected load: approx. 20 kVA Machine weight: approx. 5 t Space requirement (L x W x H): approx. 3.7 x 1.7 x 1.9 m Well-maintained machine Spindle hours only 1,569 h 12-station tool turret, live tools up to 5,000 rpm Workpiece catcher Automatic swiveling probe Sub spindle: 5,000 rpm Chip conveyor Coolant pump Interfaces: USB, LAN & RS232C Tool holder package: 3-jaw chuck 205 mm 3-jaw chuck for sub spindle 2x driven tool holders (radial + axial) 10x fixed tool holders Tool cabinet Various sets of jaws Various turning tools USB, LAN & RS232C interfaces Chip conveyor Accessories Manuals Installation dimensions (approx.): Length (depth): approx. 1,685 mm Width: approx. 1,900 mm Height: approx. 1,860 mm Weight: approx. 5,000 kg Technical data subject to change and prior sale. Errors excepted!

Condition: good (used), Year of construction: 2005, Mazak Integrex 300 - III turning/milling center, year of manufacture 2005, Cjdpfx Ageyzfr Isfjra CNC control 640 MT, travel X/Y/Z 630/230/1,585 mm, B axis NC swiveling head -30°/+195°, tool magazine with 80 positions Capto, main spindle 26 kW, C axis 0.001°, tailstock MK 5, high-pressure coolant system 70 bar with filtration unit, Tooleye, 5-axis simultaneous machining package, Mazak Monitoring System, chip conveyor,

Condition: excellent (used), Year of construction: 2024, 3 axes, C-axis with live tooling Specifications: Crjdpfx Ageyzfgxjfsa Maximum turning diameter over bed: 400 mm Maximum turning diameter over cross slide: 330 mm Bar capacity: Ø 51 mm Spindle nose: A2-6 Spindle bore: 65 mm Spindle speed: up to 4,500 rpm Spindle motor power: 11/15 kW Spindle bearing diameter: 100 mm X-axis travel: 180 mm Y-axis travel: +/- 40 mm Z-axis travel: 600 mm Rapid traverse: 24 m/min Number of turret tool stations: 12 positions Tailstock quill travel: 500 mm Quill stroke: 60 mm Quill diameter: 60 mm Taper: MT#4 Bed inclination: 30° Guideway type: prismatic guides Machine weight: approx. 4,000 kg Dimensions: 3,525 (with chip conveyor) x 1,851 x H2,020 mm Standard equipment Automatic lubrication system Coolant system Halogen work lamp Chip conveyor (chain type) Programmable hydraulic tailstock 3-jaw chuck Tool holder Siemens 828D CNC control

Condition: like new (used), Year of construction: 2022, CMZ TA 20 YS-640: YEAR: 2022 CNC: Fanuc 32i FEATURES: Swing over bed: 760 mm Swing over carriage: 600 mm Maximum turning diameter: 460 mm Maximum turning length: 640 mm Distance between chuck faces: 649 mm X-axis travel: 310 mm Z-axis travel: 640 mm Y-axis travel: +70 / –50 mm Rapid traverse X / Z / B: 30 m/min Rapid traverse Y: 15 m/min MAIN SPINDLE: SMW 210 mm chuck Bar capacity: 66 mm Spindle speed: 4,000 rpm Power: 22 / 15 kW at 366 / 286 Nm Spindle nose: ASA 6 A2 Spindle bore: 73 mm TURRET: 12-station turret, all positions live tooling Max. live tool speed: 12,000 rpm Power: 11.3 / 8.1 kW Max. torque: 75 Nm SUBSPINDLE (Servo): SMW 175 mm chuck Chuck bar capacity: 56 mm Max. usable bar: 52 mm Spindle speed: 4,500 rpm Power: 14 / 18 kW Spindle nose: ASA 6 A2 Machine dimensions: 2,542 x 1,760 x 2,120 mm Weight: 7,500 kg EQUIPMENT: SMW Autoblok BBD 250 chuck SMW Autoblok BBD 175 chuck Tool presetter Servomotor for sub-chuck Set of tool holders including 2 live tool holders Chip conveyor Codpfx Ageyzfbvsfora Cycle end lamp High-pressure pump Manual/automatic parts catcher arm (80 x 220 mm – 8 kg) Parts ejector for sub-spindle Interface for bar feeder and mist extractor Set of fixed and live tool holders Set of 3 jaws for each chuck TOP AUTOMAZIONI X-files S-364 SX bar feeder, 3,200 mm/diameter 64 mm MACHINE CONDITION: Machine in excellent, as-new condition! Can be seen in operation.

Condition: good (used), Year of construction: 2022, functionality: fully functional, Niles N 30 MC - 4500 turning-milling center, year of manufacture 2022, Siemens SI 840 D SL control system, travel X/Z 4756/725 mm, Y-axis +/- 250 mm, B-axis swivel range -105° / +95°, B-axis spindle speed up to 5,000 rpm, C-axis main spindle 0.001°, spindle speed up to 3,000 rpm, tailstock, steady rest, 144-position tool magazine, workpiece measurement, gear hobbing software. Crsdpfsyzd Riox Agfja

Condition: good (used), Year of construction: 2019, functionality: fully functional, Niles N 40 MC - 6000 Turning/Milling Center, year of manufacture 2019, Siemens SI 840 D SL control, X/Z 850/6820 mm, Y axis -200 / +400 mm, B axis 0.001°, B axis swivel range -105° / +95°, tool changer with 192 positions, C axis main spindle 0.001°, spindle speed up to 1750 rpm, 2 gear stages, max. workpiece weight between chuck and tailstock 6,000 kg, drive power 87 kW, HSK 100 interface, steady rest 70 - 425 mm, tailstock. Crjdpfx Agjyzd Rcsfja

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, We offer you the following: Manufacturer: DMG Mori Model: CLX 350 V6 Year of manufacture: 2022 Control: DMG Mori SLIMline Siemens Operate Technical specifications: Maximum turning diameter: 320 mm Distance between centers: 780 mm Bar capacity: max. 65 mm Travels: X-axis travel: 185 mm Y-axis travel: +/- 40 mm Z-axis travel: 465 mm Main spindle: Spindle speed: 5,000 rpm Drive power: 11 / 16.5 kW Sub spindle: Spindle speed: 5,000 rpm Drive power: 12.6 / 16.2 kW Number of tool stations: 12 positions Tool holder: VDI 30 Operating hours: approx. 1,760 h Spindle hours: approx. 1,130 h Technical features & accessories: - Direct path measuring system for X and Y axes - External electronic handwheel - Bar package & interface, includes: - Workpiece pick-up device for parts up to D65 x 200 mm, max. workpiece weight 3 kg - Connection for bar feeder - Chip conveyor with right-side discharge - Four-color signal lamp - Collet chuck, make Hainbuch SPANNTOP nova combi - Differential pressure clamping for the sub spindle - External chuck flushing for the sub spindle - Automatic workpiece ejector, sub spindle with internal coolant supply for chuck flushing - Hydraulic 3-jaw chuck, make SMW BB-D 175 for sub spindle - Coolant system 5 – 20 bar, includes: - High-pressure pump - Double cartridge filter for cooling lubricant Crsdpfxeyzbl Re Agfja - Coolant spray gun 5 bar - Preparation for oil mist separator - Manual tool measurement device - Automatic bar loader, make IEMCA KID80/16 - Partial belt conveyor - Technology cycle “Alternating Speed” - Technology cycle “Y-Axis Parting” - Technology cycle “Easy Tool Monitoring 2.0” Accessories, depicted tools and clamping devices are only included with delivery if specified in the additional information. Subject to change and prior sale. Technical data and information may be subject to errors or modifications.

Condition: excellent (used), Year of construction: 2014, Haas ST25Y Year of manufacture: 2014 C-axis Y-axis Cedpfeyy N D Ssx Agfera Low hours Good working condition Including tooling

Condition: ready for operation (used), Year of construction: 2004, DMG CTX 320 Crjdpfx Agoyy Np Uofsa Still in production and available for inspection Many tools included 6 live tools Spindle 5000 RPM Travel X,Z 160x450 mm Turret with 12 tool stations Weight 3700 kg Dimensions 4.5x2.5x2.5 m

Condition: used, Year of construction: 2011, HWACHEON HI-TECH 200B MC CNC LATHE MAKE HWACHEON, MADE IN SOUTH KOREA MODEL HI TECH 200B, MC YEAR 2011 CONTROL FANUC Oi-TD SWING OVER BED 500.0 mm SWING OVER SADDLE 390.0 mm MAX MACHINING DIA 350.0 mm Csdpfxjyyy Ste Agfsra MAX WORK LENGTH 400.0 mm TRAVERSES (XZ) X AXIS: 195.0 mm Z AXIS: 430.0 mm CHUCK DIA 250.0 mm MAX. SPINDLE SPEED 3,500 RPM SPINDLE NOSE A2-8 SPINDLE BAR CAPACITY 76 mm TURRET 12 STATIONS MACHINE WEIGHT 4,500 kgs PLUS C AXIS MILLING CNC BARFEED RENISHAW PROBE PARTS CATCHER TAILSTOCK SWARF CONVEYOR MACHINE MANUALS

Condition: used, Year of construction: 2008, functionality: fully functional, Turning / milling center with counter spindle with 10 CNC axes (X1, X2, Z1, Z2, Y1, Y2, B1, B2, C1, C2) Control: FANUC 31:iA Main Spindle Power: 15/11 kW bar material dia.: 51 mm spindle revolution: 5.000 min-1 Codeyyx Tvspfx Agfjra Counter Spindle Power: 11/7,5 kW bar material dia.: 51 mm spindle revolution: 5.000 min-1 Turning and milling spindle Power: 7,5/3,7 kW Turning and milling spindle speed: 12.000 min-1 max. rotation length turret bottom: 1.005 mm Slide cross X1 / X2 / Z1 / Z2 / B2: 455 / 222,5 /1.090 / 1.005 / 1.008 mm Slide cross Y1 / Y2: +/- 70 / +20, -50 mm Swivel range B1 axis: +/- 95 ° Linear rack magazine incl. support robot CNC support steady rest Coolant cyclone filter system incl. 2 pcs. coolant pumping spindle oil cooler

Condition: excellent (used), Year of construction: 2008, CNC Lathe with y-axis MAZAK - QTN 250 MSY MACH-ID 9482 Make: MAZAK Type: QTN 250 MSY Control: Mazatrol Matrix Nexus Year: 2008 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Crjdpfxsyyxugs Agfoa

Condition: used, Year of construction: 1998, turning diameter / mm turning length / mm control / Technical Specifications Working Area Max. swing diameter: 540 mm Max. turning diameter: 540 mm Max. turning diameter over ways: 520 mm Max. turning length: 1029 mm Main Spindle Speed range: 35–5,000 rpm Main drive power: 22 kW Max. torque: 349 Nm Spindle nose: A2 – 6 inches Crjdpjyyqthsfx Agfea Spindle bore: 61 mm Spindle positioning C-axis: 0°–360°/0.001° Tool turret Tool turret type: Single-spindle turret Driven tools Speed range: 15–6,000 rpm Drive power: 7.5 Kw Max. torque: 103 Nm Tool magazine Number of tool positions: 40 Max. tool weight: 7 kg Machine weight: approx. 5700 kg A wide range of accessories included – see photos A backup from 3 September 2012 is available

Condition: ready for operation (used), Mori Seiki Duraturn 2550 + 6 live tools Still in production Year: 2007 Weight: 4,250 kg Spindle motor: 19.5 kW 3,000 RPM Turning length: 436 mm Turning diameter: 340 mm Dimensions: 2375x1793x1832 Csdpfxeyyqhre Agfera Also for sale: DMU 50 V, DMU 70, CTX 320

Condition: as good as new (ex-display), Year of construction: 2023, • Hwacheon Cutex 180 AL SMC, year of manufacture 2023, new machine • CNC control: Fanuc 0i-TF Plus LCD with Manual Guide I • Rapid traverse X / Z / B: 36 / 36 / 36 m/min • Max. turning diameter: Ø 300 mm Credpfx Aoyypvbegfea • Max. turning length: 478.5 mm • Chuck size: 6" / Ø 150 mm, 5" / Ø 120 mm • Max. spindle speed: Main spindle 6,000 rpm / Sub-spindle 6,000 rpm • Bar capacity: Ø 51 / 32 mm • Main/sub-spindle motor power: 11 / 15 kW, 3.7 / 5.5 kW • 12-station turret, all stations driven • 5,000 rpm, 3.7 / 5.5 kW • Robust full slant bed made from stabilized Meehanite cast iron with precision linear guides on all axes • High-performance spindles with spindle nose A2-5 / sub A2-4 • Automatic tool measurement arm • Parts catcher • Full enclosure • Hydraulic system • Coolant system with retractable tank, 6 bar pump • Ergonomically designed, swiveling control panel • Electronic handwheel • Waterproof LED work area lighting • Transformer

Condition: as good as new (ex-display), Year of construction: 2023, • Hwacheon Cutex 180 AL YSMC, year of manufacture 2023, new machine • Control: Fanuc 0i-TF Plus LCD with Manual Guide I • Rapid traverse X / Z / B: • 36 / 36 / 36 m/min • Y-axis travel: +/- 55mm • Max. turning diameter: Ø 300mm • Max. turning length: 478.5mm • Chuck size: • 6” / Ø 150mm, 5” / Ø 120mm • Max. spindle speed: • Main spindle 6,000 rpm • Sub spindle 6,000 rpm • Bar capacity: Ø 51 / 32mm • Main/Sub spindle motor power: • 11 / 15 kW, 3.7 / 5.5 kW • 12-station turret, all stations driven • 5,000 rpm 3.7 / 5.5 kW • Robust one-piece slant-bed made from stabilized Meehanite cast iron, with precision linear guideways on all axes • Powerful spindles with spindle nose A2-5 / Sub A2-4 • Automatic tool presetter • Parts catcher • Full enclosure • Hydraulic system • Coolant system with movable tank, 6 bar pump • Ergonomic pivoting control panel • Electronic handwheel • Waterproof LED work area lighting Crjdsyypuwopfx Agfea • Transformer

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Technical details turning diameter 820 mm turning length 6000 mm control Siemens Si 840 D sl total power requirement 155 kW weight of the machine ca. 65 t dimensions of the machine ca. 16350 x 3700 x 3850 m Additional information Purchase price EUR 1.550.000 Time recording from Feb. 2025 Operating hours = 38601 h Main spindle = 1958 h Milling spindle = 1760 h CNC control Si 840D sl Working area 6000 mm Working height 1390 mm Swing diameter over bed slide/bed 820 mm X-axis travel +850 -25 mm Z-axis travel 6820 mm C-axis, smallest increment +/-0.001° Workpiece spindle Spindle head according to DIN 55026 A15 Bathing through 160 mm Front diameter Bearing 240mm 2-stage gearbox, infinitely variable programmable Drive power at 100/60% duty cycle: 78/87kW Speed ranges: 2 Speed range I: 10-501 rpm Speed range II: 10-1750 rpm Torque I, 60% duty cycle: 8000 Nm Torque II, 60% duty cycle: 2308 Nm Crsdeyymvlopfx Agfja C-axis Holding torque with backlash-free spindle brake: 3000 Nm Speed: 0-50 rpm Maximum torque (100/60% duty cycle): 3700/4430 Nm Steady rest clamping range: 70-425 mm Turning, drilling, milling head Front diameter: Bearing 110mm Interface HSK100/C8 Tool magazine Storage locations: 2 magazines, Baluff chip system Max. tool diameter (each position/every 2nd position) 125/200mm Max. tool length 600mm Tool weight 25kg Tailstock Quick diameter 180mm Stroke 170mm Internal taper MK6 Axially force, manually adjustable 5-30 kN Quick tip height adjustment +/-0.15mm Other: Collision monitoring sensor ACS 3-ARTIS Chip conveyor system Coolant system 980l tank and more

Condition: excellent (used), Year of construction: 2014, operating hours: 21,200 h, functionality: fully functional, machine/vehicle number: 256316, turning length: 1,000 mm, turning diameter: 730 mm, spindle motor power: 18,500 W, spindle speed (min.): 35 rpm, spindle speed (max.): 12,000 rpm, travel distance X-axis: 1,100 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 900 mm, rapid traverse X-axis: 50,000 m/min, rapid traverse Y-axis: 50,000 m/min, rapid traverse Z-axis: 50,000 m/min, rotational speed (max.): 1,000 rpm, rotational speed (min.): 35 rpm, type of input current: three-phase, torque: 160 Nm, workpiece weight (max.): 680 kg, spindle nose: Cône 7/24, N°40, table load: 880 kg, number of slots in tool magazine: 120, pallet changer: automatic, Equipment: CE marking, chip conveyor, documentation/manual, We are offering this Mazak INTEGREX i500V CNC turning and milling machining center, in very good condition, year of manufacture 2014. Manufacturer: Mazak Model: INTEGREX i500V Codpfxjyymrmo Agfora Year of manufacture: 2014 Condition: very good If you have any questions or need more information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 2007, functionality: fully functional, CNC turning and milling centre with Y-axis, 2 turrets, subspindle and bar feeder. A total of over 44.000,- EUR has been invested in necessary repairs and maintenance over the last 5 years by DMG MORI (replacement of the main spindle S4, ball-screws, etc.). Technical details turning diameter 100 mm turning length 320 / 345 mm control Siemens 840 D swing diameter 145 mm spindle distance 580 mm slide I - cross travel (X1) 220 mm slide I - longitudial travel (Z1) 320 mm y-axis +/- 30 mm rapid traverse (X/Y/Z) 30/15/30 m/min slide II - cross travel (X2) 120 mm slide II - longitudial travel (Z2) 345 mm rapid traverse (X/Z) 30 m/min Travel subspindle (Z3) 380 mm vertical stroke (X3) 145 mm Cedpfx Aoyymhzjgfora bar material dia. max. 36 mm rapid traverse (X/Z) 20/30 m/min power capacity (40/100 % ED) 26/21 kW spindle turning speed range 40 - 7200 U/min total power requirement 42 kVA weight of the machine ca. 5,3 t Equipment: - SIEMENS 840 D powerline CNC control - Number of controlled axes: 9 - 2 x C-axis - Y-axis in upper turret - Pick-up device with gripper - 2 SAUTER turrets with 12 tool positions (driven), VDI 25 - Tool drive with a speed range of 30 to 6000 rpm - Coolant system with paper band filter - Chip conveyor - Collet chuck on main and subspindle - Bar loading magazine, make: IEMCA BOSS 332 E 32 L, max. bar length 3180 mm

Condition: used, Year of construction: 1999, functionality: fully functional, turning diameter: 340 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 160 mm, travel distance Z-axis: 455 mm, rotational speed (max.): 6,000 rpm, feed length X-axis: 160 mm, feed length Z-axis: 455 mm, overall weight: 3,600 kg, We offer this used Mazak Super Quick Turn 10M CNC turning and milling center, year of manufacture 1999. MAZAK CNC Turning Centre with C-axis and live tooling Type: SQT10M Year: 1999 Control: MAZATROL FUSION 640T XZ travel: 160x455mm Distance between centres: 500mm Turning diameter: 340mm Spindle speed: 6000 rpm Toolchanger: 12-position ATC Machine weight: 3600kg With tailstock With tool eye With parts catcher Csdpfx Asyyl Erogfsra If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Technical details turning diameter 660/275 mm turning length 1498 mm control Fanuc/Mori Seiki MSX 701 total power requirement 90 kVA weight of the machine ca. 26,6 t dimensions of the machine ca. 5301 x 2997 x 2788 mm Additional information 9-axis CNC turning and milling centre * Fanuc MSX-701 CNC control * Milling spindle at top (B axis), as full 4th axis, positioning 0.0001 deg. * 40-position tool magazine * 10-position turret at bottom, all positions driven * 2 x 3-jaw quick-change chuck KNCS-N 315/91 * KNOLL high-pressure coolant system, pressure setting 12/25/35/45/55/62 and 72 bar, with maintenance-free rotary filter system * Chip conveyor * Drain system for main spindle chuck (controlled via M function) * Drain system for tool cutting edge (controlled via M function) * Coolant gun incl. accessories * Oil mist extraction * Direct measuring system X1, X2, Y-axis * Bar loader interface * Double foot switch for both spindles * Islands and pocket programming for MAPPS * High-speed fixed cycle for MAPPS * Programm memory extension to 8 MB * Programm restart * 3-stage signal lamp * 512 MB memory card (CF card) Swing diameter over cross slide (tool spindle 1): 750 mm Swing diameter over cross slide (turret 2): 400 mm Max. turning diameter (tool spindle 1): 660 mm Max. turning diameter (turret 2): 275 mm Max. machined workpiece length: 1498 mm Max. bar material: 90 mm Travels: X1 axis (tool spindle): 750 mm Y axis (tool spindle): 420 (+/- 210) mm Z1 axis (tool spindle): 1635 + 100 mm for tool change B axis (tool spindle): +/- 120 deg., full B-axis 1 deg. indexed and 0.0001 deg. braked X2 axis (turret): 195 mm Z2 axis (turret): 1525 mm SZ axis (subspindle): 1610 mm Rapid traverse: (X1,Z1) 50 m/min. / (Y,X2,Z2,SZ) 30 m/min. Main and subspindle: Spindle speeds infinitely variable (spindle 1 + 2): 30-3000 rpm. C axis (spindle 1 + 2): 0.001 deg. Main spindle motor: 22/18.5 kW Subspindle motor: 22/18.5 kW Torque (spindle 1 + 2): 1000 Nm Disc turret: Number of tool positions: 10 Speed of driven tools: 6000 rpm. Drive power: 5.5/3.7 kW Milling spindle head: Tool holder: HSK A63 Max. speed: 12,000 rpm Crodpjyyk R Tofx Agfja Drive power: 18.5/11 kW Torque: 120/44 Nm Tool changer: 40-stations Tool diameter 70/140 mm Tool length 400 mm Tool weight 8/10 kg Total power requirement 90 kVA Main dimensions Length x width x height 5301 x 2997 x 2788 mm Machine weight 26.6 t Accessories: Measuring arm (picture) tool measurement in machine Tool holder + box, reduction sleeves, driven tools Clamping jaws package Collets package

Condition: good (used), Year of construction: 2014, functionality: fully functional, Technical details turning diameter 356 mm turning length 510 mm control M 730 BM travel -x axis 260 mm travel -y axis -50 / +50 mm travel -z axis 590 mm Travel subspindle (B) 624 mm bar material dia. 65 mm main spindle speeds: 5000 transmission ratio 2 power capacity 15 / 11 kW Subspindle spindle speeds 6000 power capacity 11 / 7,5 kW rapid traverse (X,Y,Z,B) 30/10/30/30 m/min weight of the machine ca. 6,6 t Additional information * CNC control Mitsubishi M 730 BM * Mainspindle with 3-jaw power chuck KITAGAWA N-08, diameter 210 mm * Subspindle with 3-jaw power chuck HAINBUCH B-TOP 165-43 Crjdpjyycggefx Agfea * 12-station turret, tool spindle speed 10000 rpm, power 5.5/3.7 kW * Y-axis travel * C-axis * High/low pressure chuck system for main and subspindle * MABEO high-pressure pump with 1.5 MPa filter unit * Coolant sprayer on the chuck for main and subspindle * Coolant sprayer for the machine bed cladding * Oil mist separator * Chip conveyor * Renishaw workpiece measuring system with optical signal transmission, subspindle * Cooling of the ball screw in the X-axis * Gantry loader, left-hand installation, 14-station storage, 20-pallet workpiece storage, Double gripper conveyor

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Technical details turning diameter 760 mm turning length 1540 mm control Fanuc 31i-B dimensions of machine 5500 x 2700 x 3110 mm chip conveyor 6900 x 2400 mm total power requirement 94,42 kW weight of the machine ca. 15,5 t Additional information Credpfxsyycd Ee Agfsa Turning center with infinitely variable swiveling milling head and Y-axis, motorized lower turret and subspindle. Condition: Very well preserved, machine comes from a company liquidation. Time recording: Control unit on: 13127 hours Runtime: 3833 hours Processing time: 2835 hours The upper head is fed by a tool magazine and can turn or mill at various angles. Even highly complex components can be completely machined without further repositioning. Fanuc 31i-B CNC control Swing diameter over bed: 1000 mm Maximum turning diameter: 760 mm Maximum turning length: 1540 mm Maximum bar diameter (manual/continuous): 76/76 mm Y-axis travel: 230 mm (±115 mm) Clamp (counter spindle) ASA interface: A2-8 Spindle speed: 4000 rpm AC motor power (cont./30 min.) 22/26 kW Turning/milling head B-axis rotation / indexing 240 deg. (±120 deg.) Tool holder Capto C6 Speed in revolutions per minute 12000 rpm AC motor power 30 min. 15/18.5 kW Number of tools 40 (Opt. 80) Tool turret Number of driven tools 12 (12) Number of driven tools 7.8 kW/30 min.