Kögel Werkstoff- und Materialprüfsysteme GmbH

Year of construction: 2026, condition: as good as new (ex-display), - Automatic grinding and polishing machine - Base: - Powerful motor with high torque - Power supply 230 V/50 Hz - 10"/12" (250/300mm) disc diameter - Retractable water hose for easy cleaning - Variable speed settings - Manual operation possible - Corrosion-resistant machine housing Sample head: - Automatic 6-position sample head (Ø30/40/50mm) - Pneumatic sample pressure - Manual swing-in/swing-out of the sample head - Motorized Z-axis (up/down) Todpfxs Ahg A Do Airsd - Variable speed setting - 7-inch touchscreen system Standard scope of supply: - Grinding & polishing machine 10"/12" (Ø250/300mm) - Aluminum disc - Magnetic disc for attachment to any self-adhesive backing plate - Ferromagnetic backing sheet - Holding tape - Clamping ring - Splash guard ring - Cover - Automatic 6-position sample head - Operating manual Optional: - Automatic dispenser (3x suspension / 1x lubricant) - Delivery / installation / training

Year of construction: 2026, condition: new, - Modern, ergonomic design - Automatic testing sequence with digital display (reading accuracy of 0.1 HR units) - Simple operation and fast testing sequence - Testing chamber height approx. 270mm - Testing chamber depth approx. 170mm Testing load ranges: 15 / 30 / 45 / 60 / 100 / 150kg Testing method: Rockwell & Super Rockwell Standard scope of delivery: - Hardness tester 3R-150M - Prism support - Testing table, flat, Ø200mm - Testing table, flat, Ø60mm Todpfx Aj Ahgvdeirjd - Diamond indenter 120° Rockwell - Hardness comparison plate HRC - Indenter protection/clamping cap - Spindle protection - Accessory case Optional: - Delivery / installation / calibration & training

Year of construction: 2026, condition: new, Product Information: This hardness testing device is ideally suited for mobile hardness testing, where great emphasis is placed on fast and accurate results. Up to 3 different test probes can be used. (UCI, manual & motorized / Leeb) Conversion to HL, HRC, HRB, HB, HV, and MPa is possible. Features include: average value calculation, limit value function, statistical function, and testing in all directions (360°). Dimensions of housing (W x D x H): approx. 28 x 83 x 165 mm Tjdpfe Ahgrlox Airjd Housing material: painted metal Battery operating time (with backlight): approx. 6 hours Battery operating time (without backlight): approx. 12 hours Battery charging time: approx. 8 hours Input voltage: 110 - 240 V Power supply/adapter included: EURO *Subject to technical changes* Standard delivery scope - Display unit - Manual test probe, selectable: 10N / 50N / 100N (HV1 / HV5 / HV10) - Connection cable - Protective case - Battery / charger - Hardness comparison plate HV - Calibration certificate HV5 (UCI) - Sturdy transport case Optional accessories: - Motorized test probe (HV0.3; HV0.5; HV0.8; HV1; HV2) - Leeb test probe (HLD/HLG) - Measuring stand - and more (see homepage)

Condition: used, VÖTSCH Vötsch VT³ 7012 S2 Cold and Heat Shock Testing Chamber – Temperature Shock Chamber, -80 °C to +220 °C – 125 Liters Vötsch VT³ 7012 S2 Industrial temperature shock testing chamber with two temperature zones, 125-liter test chamber volume, and digital touchscreen control For sale is a Vötsch cold and heat shock testing chamber, model VT³ 7012 S2. The unit is suitable for testing components, electronic parts, and materials under rapid temperature changes. The hot chamber has a temperature range of +50 to +220 °C, and the cold chamber has a temperature range of -80 to +70 °C. The testing chamber has two temperature zones, a stainless steel test chamber, and a digital touchscreen control for setting and monitoring test programs and test cycles. Technical data: Manufacturer: Vötsch Industrietechnik GmbH Model / Type: VT³ 7012 S2 Product type: Cold and heat shock testing chamber / Temperature shock chamber Year of manufacture: 2016 Equipment number: 58566224220040 Test chamber volume: approx. 125 liters (model specification) Temperature zones: 2 Operation: Digital touchscreen Operating hours according to control display: 4,800.5 h Weight: approx. 1,000 kg (estimate, not weighed) Temperature ranges: Hot chamber: +50 to +220 °C Cold chamber: -80 to +70 °C Temperature ranges according to technical model specifications. Electrical data: Rated voltage: 3/N/PE AC 400 V ± 10 % Mains frequency: 50 Hz Rated power: 10 kW Rated current: 25 A Refrigerant: R404A: 1.70 kg R23: 1.27 kg Pressure specifications: Maximum low pressure: 22.5 bar(g) Maximum high pressure: 25 bar(g) Standing pressure: 14 bar(g) Equipment: Two temperature zones for cold and heat shock testing Stainless steel test chamber Insulated test chamber door with viewing window Interior lighting Air circulation system with fans Digital touchscreen control with graphical user interface Digital temperature displays RS232 interface RS485/RS422 interface Connection options for external measurement and control functions Scope of delivery: 1 × Vötsch VT³ 7012 S2 temperature shock testing chamber with integrated touchscreen control and existing equipment as shown in the picture. Other accessories not shown in the picture are not included in the offer. Condition: Used Optically well-maintained condition with typical signs of wear. The unit can be switched on. Touchscreen control, temperature displays, and interior lighting are functioning. Todpfx Ao Agm Ucjirsd Condition and scope of delivery, see pictures. Tools, machines, and other items not explicitly mentioned are not part of the sale. Subject to change, errors, and prior sale. We would be happy to answer any further questions by telephone.

Condition: used, WEISS TECHNIK Weiss Technik WK1-180/70 Climate Test Chamber, Temperature Test Chamber – -70 to +180 °C – 5.5 kW Weiss Technik WK1-180/70 Climate and temperature test chamber with a stainless steel test chamber, digital control panel, and a temperature range of -70 to +180 °C. For sale is a used climate test chamber from the manufacturer Weiss Umwelttechnik GmbH. Tsdpfe Agmfnex Aired This device is suitable for temperature and climate testing of components, assemblies, and industrial products. The temperature range extends from a minimum of -70 °C to a maximum of +180 °C. The test chamber features a stainless steel test chamber, an insulated door with a viewing window, and a digital control panel. Lateral cable entries allow for the connection of measuring cables during testing. Technical data: Manufacturer: Weiss Umwelttechnik GmbH / Weiss Technik Model: WK1-180/70 Product type: Climate and temperature test chamber Device no.: 58226012250020 Material no.: 67609071 Temperature range: -70 to +180 °C Operating hours according to display: 45,555.3 h Permissible operating overpressure: 25 bar Test chamber volume: approx. 190 liters Electrical data: Voltage supply: 3/N/PE AC 400 V ± 10 % Mains frequency: 50 Hz Rated power: 5.5 kW Rated current: 12 A Refrigerant: R404A: 2.3 kg R23: 0.8 kg Equipment: Digital control and operating panel Stainless steel test chamber with insert grid Insulated test chamber door with viewing window Interior lighting Circulation fan Lateral cable entries Cable entries: Measured diameters: approx. 57.69 mm approx. 87.23 mm approx. 132.42 mm Scope of supply: 1 × Weiss Technik WK1-180/70 Climate Test Chamber with integrated control panel and insert grid as shown in the picture. The sale is made in the condition shown. Condition: Used Signs of wear and tear due to age and use. Condition and scope of supply see pictures. Tools, machines, and other items not explicitly mentioned are not included in the sale. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, WEISS Weiss WK3-1000/70 climate testing chamber with temperature and humidity control – 990 liters – -70 to +180 °C Weiss WK3-1000/70 Air-cooled climate and temperature testing chamber with touch panel, 990 liters test chamber volume, and a temperature range of -70 to +180 °C For sale is a Weiss climate testing chamber, type WK3-1000/70, with temperature and humidity control. The unit is suitable for temperature and climate testing of components, assemblies, and industrial products. The integrated touch panel allows for setting and monitoring temperature, humidity, and test programs. Technical data: Manufacturer: Weiss Type: WK3-1000/70 Product type: Climate and temperature testing chamber Serial number: 59226115080010 Test chamber volume: approx. 990 liters Cooling: Air-cooled Operation: Touch panel Weight: approx. 955 kg Test chamber dimensions: Height: 950 mm Width: 1,100 mm Depth: 950 mm External dimensions: Height: approx. 2,000 mm Width: 1,415 mm Depth: 2,105 mm Data for temperature testing: Temperature range: -70 to +180 °C Heating rate: approx. 4.0 K/min Cooling rate: approx. 2.5 K/min Data for climate testing: Temperature range: +10 to +95 °C Humidity range: 10 to 98 % relative humidity Electrical data: Rated voltage: 3/N/PE AC 400 V ± 10 % Mains frequency: 50 Hz Rated current: 29 A Rated power: 13.8 kW Refrigerant: R404A: 4.6 kg R23: 1.2 kg Equipment: Touch panel for operation and program control Test chamber made of stainless steel Viewing window with lighting Air circulation system with fans Insert shelf Side openings: approx. 50 mm and 130 mm Communication interfaces Testing: The climate testing chamber has been tested. Heating, cooling, and humidity functions have been checked. Scope of delivery: 1 × Weiss WK3-1000/70 climate testing chamber with integrated equipment and insert shelf Tsdpj Aghkuefx Airsd Scope of delivery as shown in the pictures. Condition: Used The unit has been tested. Condition and scope of delivery, see pictures. Tools, machines, and other items not explicitly mentioned are not part of the sale. Subject to changes, errors, and prior sale. We will gladly answer any further questions by telephone.

Year of construction: 2021, condition: good (used), • Manufacturer: Weiss Technik GmbH • Model: HeatEvent F 60/90 (Basic Line) • Year of manufacture: 2021 Tsdpfj Agfinjx Airjd • Maximum temperature: 220 °C • Usable volume: 324 liters • Internal dimensions (usable space): approx. 600 mm (W) x 900 mm (H) x 600 mm (D) • Control: Touchscreen interface • Safety standard: Compliant with DIN EN 1539 (drying of flammable materials) • Connection: 400 V (3~/N/PE AC 50 Hz) • Weight: approx. 350 kg

Condition: used, Vötschtechnik Climate chamber / Temperature chamber Vötschtechnik ClimeEvent C/480/70/15 Temperature and climate chamber, water-cooled Approx. 480 liters / -72 °C to +180 °C / 10 to 98 % RH For sale is a used climate chamber from Vötschtechnik GmbH. The test chamber is suitable for temperature and climate tests, environmental simulation, material testing, quality assurance, as well as development, aging, and stress tests. The integrated touchscreen control allows temperature and humidity profiles and automatic test programs to be created and executed. Existing test programs include tests according to IEC 60068, among others. Technical data Manufacturer: Vötsch Industrietechnik GmbH Type: ClimeEvent C/480/70/15 Device type: Climate chamber / Temperature chamber Test chamber volume: approx. 480 liters Country of manufacture: Germany Tsdpfx Ais Af Ig Aerod Temperature range: -72 °C to +180 °C Temperature change rate heating: approx. 17 K/min Temperature change rate cooling: approx. 21 K/min Max. heat compensation at +20 °C: approx. 8,000 W Temperature homogeneity spatially: ±0.5 to ±2 K Temperature gradient up to +180 °C: ≤2 K Climate range temperature: +10 °C to +95 °C Dew point range: +4 °C to +94 °C -3 °C to +4 °C discontinuous Humidity range: 10 to 98 % RH Humidity deviation over time: approx. ±1 to ±3 % RH Temperature deviation over time in climate operation: ±0.1 to ±0.3 K Temperature homogeneity spatially in climate operation: ±0.5 to ±1 K Refrigerant: R449A / R23 Refrigerant quantity: 4.00 kg / 2.30 kg GWP: 1,397 / 14,800 CO₂ equivalent: 5.59 t / 34.04 t Max. operating pressure ND/HD: 19 / 25 bar(g) Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 24 kW Rated current: 43 A Cooling Water-cooled design Cooling water supply and cooling water return available Connection for demineralized water Overflow and condensate drain Dimensions and weight Test chamber volume: approx. 480 liters External dimensions according to installation plan (W × D × H): approx. 2,807 × 1,000 × 2,020 mm Transport dimensions with overhangs (L × W): approx. 2,857 × 1,115 mm Weight according to series documentation: approx. 1,350 kg Equipment Touchscreen control / WEBPanel Program and manual test operation Temperature and humidity control Stainless steel interior Large viewing window Test chamber lighting Several shelves / insertion levels Water-cooled design Side test chamber openings Safety temperature limiter RS232 interface RS485 / RS422 interfaces USB interface Status, alarm and maintenance display Operating hour counter Program management and reporting function Areas of application Temperature testing Climate testing Environmental simulation Humidity testing Material testing Electronics testing Component testing Quality assurance Research and development Aging and stress tests Condition Used Workshop inspected Optical condition according to pictures Scope of supply 1x Vötschtechnik ClimeEvent C/480/70/15 climate chamber Shelves according to pictures Existing documentation / operating manual Accessories according to pictures Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection Shipping or forwarding possible. Subject to changes, errors and prior sale.

Condition: used, VÖTSCH Tjdo Aa Nufopfx Airsd Temperature Testing Chamber / Vibration Testing Chamber / ShakeEvent Vötsch ShakeEvent T/1200/70/5/V/S Temperature range: -70 °C to +180 °C Test chamber volume: approx. 1,150 liters / Year of construction: 2019 Water-cooled – Electrically adjustable test chamber height For sale is a used temperature testing chamber from the manufacturer Vötsch Industrietechnik GmbH / Weiss Technik, model ShakeEvent T/1200/70/5/V/S. The system was developed for demanding temperature tests and the combination with vibration and shock testing systems. Technical data: Manufacturer: Vötsch Industrietechnik GmbH / Weiss Technik Model: ShakeEvent T/1200/70/5/V/S Type of equipment: Temperature testing chamber / Vibration testing chamber Year of construction: 2019 Test chamber volume according to manufacturer's standard version: approx. 1,150 liters Version: water-cooled Adjustable test chamber height: electrically Country of manufacture: Germany Temperature data: Temperature range: -70 °C to +180 °C Temperature change rate, cooling, according to manufacturer: approx. 4.5 K/min Temperature change rate, heating, according to manufacturer: approx. 5.5 K/min Refrigerant circuit: Refrigerant 1: R449A Filling quantity: 6.50 kg GWP according to nameplate: 1,397 CO₂ equivalent: 9.08 t Max. low pressure: 19 bar g Max. high pressure: 25 bar g Refrigerant 2: R23 Filling quantity: 2.50 kg GWP according to nameplate: 14,800 CO₂ equivalent: 37.00 t Max. low pressure: 19 bar g Max. high pressure: 25 bar g Standby pressure: 12.5 bar g Electrical data: Mains connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 24 kW Rated current: 41 A Test chamber: Test chamber volume according to manufacturer: approx. 1,150 liters Internal dimensions (W × D × H): approx. 1,100 × 1,100 × 1,100 mm Electrically adjustable test chamber height Interior for temperature and stress testing Dimensions / Transport: External dimensions (W × D × H): approx. 1,525 × 3,210 × 2,150 mm Weight: approx. 1,600 kg The specified dimensions and weight are based on the manufacturer's table for the corresponding ShakeEvent T/1200/70/5/V standard version. Deviations in the existing /V/S version are possible and must be checked before transport. Equipment: Programmable touch panel control WEBSeason operating interface Temperature control Electrically adjustable test chamber height Water-cooled cooling system Multi-stage cooling system Test chamber with viewing window Test chamber lighting Side test specimen access Preparation for vibration and shock testing systems Temperature and status display Alarm and warning display Cooling water supply and return Overflow and condensate drain LAN communication interface Connection and supply components according to the images Application areas: Temperature testing Combined temperature and vibration testing Environmental simulation Environmental Stress Screening (ESS) Electronics and component testing Automotive testing Material testing Quality assurance Research and development Aging and stress tests Temperature cycling test Condition: Used Year of construction 2019 Optical condition according to the images Scope of delivery: 1 × Vötsch ShakeEvent T/1200/70/5/V/S temperature testing chamber Programmable touch panel Existing connection and supply components Accessories according to the images Shipping via freight forwarder possible upon agreement. Due to the dimensions and weight, loading and transport must be coordinated in advance. Subject to

Year of construction: 2019, condition: good (used), functionality: fully functional, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) Tedpfx Aie Aa Ig Hored ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Year of construction: 2006, condition: good (used), functionality: fully functional, machine/vehicle number: 3109, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, Todpfx Ao Aarlmjirsd and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: used, RS SIMULATORS Climate Testing Chamber / Temperature and Humidity Testing Chamber RS Simulators KKC 2/45 Temperature range: -30 °C to +130 °C Todpfxjz Uny Ds Airsd For sale: a used climate testing chamber from the manufacturer RS Simulators Prüf- und Messtechnik GmbH. The system is suitable for temperature and humidity testing, environmental simulation, material testing, quality assurance, as well as development and stress testing. The chamber features a programmable controller, temperature and humidity display, a viewing window, and a stainless steel test chamber. Technical data: Manufacturer: RS Simulators Type: KKC 2/45 Design: Compact climate chamber Temperature range according to workshop report: -30 °C to +130 °C Humidity function: available Air-cooled design Humidity testing at 30 °C / 40 % RH Humidity testing at 80 °C / 85 % RH Refrigerant: R449A Filling quantity: 2.0 kg GWP according to nameplate: 1,397 Mains connection according to nameplate: 3 × 400 V / N / PE Rated current: 20 A External dimensions according to previous description (W × D × H): approx. 1,390 × 2,550 × 2,390 mm Weight according to nameplate: 1,400 kg Equipment: Programmable controller SE-604 Temperature and humidity control Digital temperature and humidity display Program and curve display Data logger menu Test chamber made of stainless steel Test chamber door with viewing window Test chamber lighting Circulation fan Insert shelf and support rails Emergency stop switch Water connections Application areas: Temperature testing Climate testing Humidity testing Environmental simulation Material and component testing Electronics and component testing Quality assurance Research and development Aging and stress tests Condition: Used Optical condition according to images Scope of delivery: 1 × RS Simulators KKC 2/45 climate testing chamber Insert shelf and accessories according to images Shipping or freight forwarding possible. Subject to changes, errors and prior sale.

Year of construction: 2021, condition: like new (used), WeissTechnik ClimeEvent C/180/70a/3 climatic chamber – year 2021 – EXCELLENT CONDITION For sale: a professional WeissTechnik ClimeEvent C/180/70a/3 climatic chamber, manufactured in Germany in 2021. The unit is in excellent technical and visual condition. It has only been used a few times, so it shows minimal signs of wear. The chamber was purchased from an official Polish distributor and has been serviced regularly. Key information: * Year of manufacture: 2021 * Used only a few times * Technical and visual condition: EXCELLENT * Unit is 100% functional * Regularly serviced * Purchased from an official distributor in Poland * German production – high quality and reliability Technical specifications: * Manufacturer: Weiss Technik * Series: ClimeEvent * Model: C/180/70a/3 Tsdjz Tzvvjpfx Airod * Year of manufacture: 2021 * Chamber volume: 180 liters * Temperature range: from -70°C to +180°C * Relative humidity control: typically from 10% to 98% RH * Rated current: 15 A * Rated power: 5.3 kW * Power supply: 3/N/PE AC 400 V * Country of manufacture: Germany Temperature and humidity control The WeissTechnik ClimeEvent climatic chamber enables precise environmental testing under controlled temperature and humidity conditions. The humidity control system allows for simulating various climatic conditions, including high-humidity environments, which makes it possible to test the resistance of materials, electronic components, and finished products. Possible applications: * Climatic and environmental testing * Resistance testing to high and low temperatures * Testing under high-humidity conditions * Material aging studies * Testing of electronic components * Quality control in industry * Laboratory and research & development (R&D) studies Condition of the unit The chamber has been used sporadically and is in excellent condition. It represents an attractive alternative to purchasing a new unit, offering professional research capabilities at a significantly lower cost. The unit is fully functional and ready for further use.

Year of construction: 2025, condition: like new (used), functionality: fully functional, 12 months warranty, available from 12/2026, like new, additional images available upon request - with frame - TS version, pass-through cabinet with fully insulated stainless steel doors, locking mechanism to minimize contamination - e.g. for material transfer between cleanroom and non-cleanroom environments - Maximum temperature: 250 °C - Oven chamber volume: 161 liters - External dimensions without frame: 745 x 1233 x 584 mm (W x H x D) - Oven chamber dimensions: 560 x 720 x 400 mm (W x H x D) - Adaptive, multifunctional, digital PID microprocessor controller with high-resolution TFT color graphic display - Timer: Digital countdown timer with target time indication, adjustable from 1 minute to 99 days - SetpointWAIT function: Process time starts only when the target temperature is reached - Calibration: Three freely selectable temperature values - Adjustable parameters: Temperature (Celsius or Fahrenheit), speed of the circulation fan, exhaust flap position, program runtime - Further adjustable parameters: Time zones, daylight saving time - Air turbine: Electronically controlled, adjustable in 10% steps, low noise - Fresh air: Addition of preheated fresh air via electronically adjustable exhaust flap - Exhaust: Exhaust nozzle with throttle valve, electronically controlled - Maximum 8 inserts possible (only 2 included) - Maximum load per shelf: approx. 20 kg - Maximum total load: 210 kg - Power: 3200 W - Voltage: 230V, 50/60 Hz - Oven weight: 125 kg + frame - Documentation, CE declaration The oven is not to be used for substances containing solvents. Oven, industrial oven, heating cabinet, heat oven, laboratory oven, drying oven, temperature oven, test cabinet, universal cabinet. Todpfsz Tf Ddex Airjd Precise drying, heating, tempering, aging, curing, testing, and hardening in research, science, industry, and quality assurance.

Condition: excellent (used), For sale: a climate chamber in excellent technical and visual condition. If you have any questions, please feel free to contact me. Technical specifications: Chamber capacity: 749 liters Operating temperature range: From 0°C to +70°C (without humidity control) From +5°C to +70°C (with humidity control) Humidity control range: from 10% to 90% RH (relative humidity) Cooling/heating: Peltier technology (very energy-efficient, with low vibration) Internal dimensions (W × H × D): 1040 × 1200 × 600 mm External dimensions (W × H × D): 1224 × 1720 × 755 mm Power supply: 230 V, 50/60 Hz Maximum power consumption: 1050 W Todpfx Aijz Tc Hiered

Condition: used, Technical details: Item description Temperature range: 0 to +70 °C Setting accuracy: 0.1 °C Internal volume: 53 liters External dimensions (W × H × D): approx. 585 × 787 × 604 mm External depth incl. door handle: approx. 660 mm Internal dimensions (W × H × D): approx. 400 × 400 × 330 mm Weight: 74 kg Power consumption: 275 W Power supply: 230 V / 50–60 Hz Current consumption: 1.2 A Todpfxsz Szl Ue Aired Maximum number of shelves: 4 Maximum total load: 80 kg

Condition: used, Item description Temperature range: +20 to +80 °C (IN/IF) Setting accuracy: 0.1 °C Capacity: 161 liters External dimensions (W × H × D): approx. 745 × 1107 × 584 mm Tsdjz Szlzepfx Aired External depth including door handle: approx. 640 mm Internal dimensions (W × H × D): approx. 560 × 720 × 400 mm Weight: 72 kg Power: 1,600 W (IN/IF) Power supply: 230 V Power consumption: 7.0 A (IN/IF) Max. number of shelves: 8 Max. load per shelf: 30 kg Max. total load: 210 kg

Condition: used, LDS Shaker Spare Parts / Vibration Testing System Accessories LDS V8-440 / HBT750C Spare Parts and Accessories Package 30 individual parts – sensors, filters, cables, and mechanical spare parts Mostly individually packaged and visually in new condition For sale is a comprehensive spare parts and accessories package from the inventory of an LDS V8-440 / HBT750C vibration testing system. The collection consists of various spare parts for electrodynamic vibration testing systems, including filter elements, pressure sensors, connecting cables, and mechanical components. Depending on compatibility, the parts are suitable as a stock of spare parts for the maintenance, repair, and servicing of suitable shaker systems. Technical Data / Parts List: Manufacturers / Brands: LDS, BD Sensors, WIKA, and HYDAC Equipment Type: Shaker Spare Parts / Vibration Testing System Accessories Original System Assignment: LDS V8-440 / HBT750C Total Scope: 30 individual parts in 15 positions LDS Filters and Filter Elements: 4x LDS V300232 – Filter mats 25 x 25 mm 2x LDS V500133 – Filter elements for vibrators 1x LDS V500135 – Filter element for HBT sliding table 1x LDS V500131 – Oil filter for LPT 1x HYDAC 1260880 / 0030 D 020 ON – Hydraulic filter LDS Mechanical Spare Parts: 2x LDS V300089 – Target / Reference element for V8/V895 1x LDS V300087 – Target / Reference element 1x LDS V300135 – Steel bushing / ball joint 1.5 inches 1x LDS V300666 – Steel guide shaft for shaker armature 2x LDS V300122 – Spare parts, exact designation unknown Todsz Spt Hjpfx Airsd Sensors / Pressure Measurement Technology: 5x BD Sensors DMP 331 – Industrial pressure transmitters 1x WIKA S-2631301 / P.8392006 – Pressure sensor / pressure transmitter Connecting Cables / Wires: 1x LDS V300187 – Electrical connecting cable 1x LDS V300186 – Grounding connecting cable 6x Shaker receiver cables – signal and connecting cables Features / Special Characteristics: Extensive spare parts inventory Original part numbers on numerous packages Several filter elements for vibrators and sliding table Pressure transmitters from various manufacturers Electrical connecting and signal cables Mechanical spare parts for shaker systems Mostly individually packaged components Application Areas: Electrodynamic vibration testing systems LDS shaker systems Maintenance and servicing Spare parts supply Vibration and shock testing technology Hydraulic and pressure measurement technology Industrial testing systems Compatibility: The spare parts package comes from the environment of an LDS V8-440 / HBT750C vibration testing system. Individual packages show additional model designations such as V8/V895, V810, or V850. The actual suitability and compatibility of the respective spare parts should be checked before use using the part numbers and technical data. Condition: Used stock / Used Mostly individually packaged Visually in new or unused condition Functionality testing of the sensors is not documented Optical condition according to images Scope of Delivery: 1x complete LDS shaker spare parts and accessories package 30 individual parts according to the listed parts list Accessories as shown in the images The table or other items not explicitly mentioned in the photos are not included in the sale. Shipping is possible. Subject to changes, errors, and prior sale. We will gladly answer any further questions by telephone.

Condition: used, TIRA Climate simulation chamber / walk-in climate test chamber TIRA TCZ 4022 S -2K Air-cooled | -40 to +140 °C | Refrigerant R449A For sale is a used, walk-in climate simulation chamber from the manufacturer TIRA. The system consists of an insulated test chamber, an air handling unit, external humidification, a machine unit and a control cabinet. It is used for temperature and humidity testing. Technical data: Manufacturer: TIRA Type: TCZ 4022 S -2K Cooling type: air-cooled Temperature range: -40 to +140 °C Temperature stability, supply air: over time ≤ ±0.5 °C; spatially ≤ ±1.0 °C Heating / Cooling: approx. 2 K/min each (-30 to +85 °C, without test item and thermal load) Climate range: +10 to +90 °C Humidity: 10 to approx. 95 % RH Dew point: +5 to +89 °C Humidity stability, supply air: over time ≤ ±2.5 % RH With heat compensation up to 16 kW: +15 to +80 °C; 15 to approx. 80 % RH Dew point: +10 to +74 °C Test chamber (W x D x H): approx. 2260 x 4648 x 2260 mm External dimensions: approx. 2660 x 6460 x 2800 mm Door opening (W x H): 2260 x 2260 mm Climate module KB 127: 1700 x 800 x 1400 mm Control cabinet: 800 x 500 x 2000 mm Power connection: 400 V, 3/PE/N, 50 Hz Rated power: 95 kW; Rated current: 150 A Fuse rating: 200 A, slow-blow Total weight according to specifications: approx. 5834 kg Equipment: Stainless steel interior and floor Double-wing door with viewing window approx. 1000 x 1000 mm Supply air at the top / exhaust air at the bottom on the rear wall Electric heating, direct cooling and dehumidification Bitzer 6G-30.2Y; Refrigerant R449A; Oil SEZ 32 Steam humidifier EDB 40 4 test chamber spotlights à 500 W Insulation: 80 mm PUR and 120 mm mineral wool Floor load: 15,000 N/m²; Wheel load: 1,500 N/wheel (≥ 4 cm²) Application areas: Temperature and climate testing Environmental simulation Material and component testing Quality assurance and development Condition: Tsdpfx Asz Sn Uvjirsd Used Optical condition according to pictures Scope of delivery: TIRA TCZ 4022 S -2K with associated components as shown in the pictures Items not explicitly mentioned are not part of the sale. Shipping by freight forwarder is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: excellent (used), For sale is a professional Vötsch VTL 7010 climate chamber, designed for conducting temperature tests and simulating environmental conditions. The device is used in laboratories, quality control departments, research and development centers, and for testing electronic, automotive, and mechanical components. The chamber is in good working order – the touchscreen starts up correctly and displays the main menu and the current operating temperature, as confirmed by the photos. Technical specifications: Manufacturer: Vötsch Industrietechnik GmbH Model: VTL 7010 Year of manufacture: 2010 Temperature range: -70°C to +180°C Heating/cooling rate: approx. 3.5 K/min Refrigerant: R404A – 0.8 kg R23 – 0.2 kg Power supply: 230 V AC, 50 Hz Todpfxoz Snbwe Airjd Rated power: 3.5 kW Rated current: 15.2 A Operating pressure: 8 bar Control via a color touchscreen Working chamber made of stainless steel Door with a viewing window Adjustable internal shelves CE marking Applications The device is ideally suited for: temperature tests, material testing, testing electronics and components, durability tests, quality control, research and development work. Condition: used, functional, control panel operates correctly, internal chamber is clean and well-maintained, normal signs of wear and tear, sold exactly as shown in the pictures. Included: Vötsch VTL 7010 climate chamber, 2 perforated shelves, built-in control panel.

Condition: good (used), For sale: professional Vision Engineering Lynx Compact X6 stereo microscope, manufactured in the UK. This is a modern eyepiece-free microscope, providing a spatial 3D image without the need to place eyes against eyepieces – offering exceptional comfort for quality control and precision assembly tasks. Technical specifications: Tjdpfx Aijz Sli Eerod • Manufacturer: Vision Engineering Ltd. (UK) • Model: Lynx Compact X6 • Magnification: 6× (Compact X6 objective) • Type: stereo, eyepiece-free • Illumination: integrated LED in the base • Power supply: 230 V • Head with focus and height adjustment • Serial number: MFS 11572 • DGUV safety inspection – current safety test certification Condition: • Used item, optics are clean, mechanics fully operational. • Damaged upper cover of the plastic element (visible in photos) – does not affect operation or image quality. • Illumination is fully functional. • Device tested and ready for use. Applications: Laboratories, quality control, electronics, optics, and medical industries. Excellent for precision work, SMD soldering, PCB inspection, micromachining, and micromechanics.

Condition: excellent (used), Professional, mechanical analog hardness tester for measuring the hardness of metals according to the following scales: Brinell / Rockwell B / Rockwell C / Vickers The device operates without power – ideal for quick measurements in the field, production, or quality control. Features: • Original set with carrying case, instruction manual, and accessories • Brinell, Rockwell B and C, and Vickers scales • Model: No. 3 / Instrumatic Universal Hardness Tester • Manufacturer: C.V. Instruments Ltd, Bradford, England • Mechanical dial gauge – measurement without power Tjdpfxez Skquj Airjd • Clear analog measurement scale ⸻ Included in the set: • Hardness tester • Carrying case • Instruction manual in German • Complete set of adapters and sleeves (visible in the set) Condition: like new / warehouse stock Equipment unused or used a few times for testing – no signs of wear.

Condition: used, Vötsch Temperature testing chamber / Climate testing chamber Vötsch VT 7004 temperature testing chamber Temperature range from -70 °C to +180 °C For sale is a used temperature testing chamber from the manufacturer Vötsch Industrietechnik GmbH. The temperature testing chamber is suitable for temperature tests, environmental simulation, material testing, quality assurance, electronics and component testing, as well as development, aging and stress tests. The system features a programmable controller, a stainless steel test chamber, air cooling, and a side access for test specimens. Technical data: Manufacturer: Vötsch Industrietechnik GmbH Type: VT 7004 Device type: Temperature testing chamber / Climate testing chamber Temperature range: -70 °C to +180 °C Humidity control: not available Air-cooled design Test results documented in the workshop protocol: Temperature change rate, heating: approx. 5.44 K/min Temperature change rate, cooling: approx. 4.81 K/min Todjz R Nrzepfx Airod Refrigerant 1: R404A Refrigerant quantity: 0.7 kg Refrigerant 2: R23 Refrigerant quantity: 0.22 kg Standing pressure: 15 bar Permissible operating overpressure: 25 bar Mains connection: 1/N/PE AC 230 V ±10 % / 50 Hz Rated power: 2.0 kW Rated current: 10 A External dimensions according to manufacturer's drawing (W × D × H): approx. 950 × 830 × 757 mm Weight: approx. 150 kg Test specimen access: approx. Ø 80 mm Equipment: Programmable controller Temperature control Air-cooled design Stainless steel test chamber Side access for test specimens RS232 interface RS485/RS422 interface Digital I/O Potential-free contact Program operation and manual operation Application areas: Temperature testing Environmental simulation Material testing Electronics testing Component testing Assembly testing Sensor testing Quality assurance Research and development Aging and stress tests Condition: Used Optical condition as shown in the pictures With signs of wear and tear due to age and use Scope of delivery: 1x Vötsch VT 7004 temperature testing chamber Accessories as shown in the pictures Important note: For the safety of our customers, the following work will be carried out on the offered testing and climate systems in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection The table shown in the photos and any other items not explicitly mentioned are not included in the sale. Shipping or freight transport is possible. Subject to changes, errors and prior sale. We are happy to answer any further questions by telephone.

Condition: used, Weiss   Weiss ShockEvent D/210/a/V1   Type of equipment: Temperature-controlled shock testing chamber   Testing principle: Stationary test chamber with supply of warm, cold, and ambient air via flaps   Test chamber volume: approx. 210 liters   Usable test chamber width / height according to installation plan: 700 / 500 mm   Installation dimensions according to installation plan (W × D × H): approx. 1,480 × 1,670 × 1,967 mm, plus space for attachments   Weight: approx. 1,350 kg   Temperature range, warm chamber: +50 to +225 °C Temperature range, test chamber, warm phase: +50 to +200 °C Temperature range, test chamber, cold phase: −65 to 0 °C Temperature range, cold chamber: −70 to 0 °C   Heating rate: 18 K/min, i.e. 18 °C Cooling rate: 2 K/min, i.e. 2 °C   Temperature deviation over time: ±0.3 to ±0.5 K in steady state Temperature homogeneity spatially: ±0.5 to ±1.5 K   Heat compensation, cold phase: max. 6,000 W at −20 °C Heat compensation, warm phase: 0 W   Maximum load, test chamber floor: 100 kg, evenly distributed   Maximum number of insert baskets: 7 pieces Maximum load per insert basket: 7.5 kg Maximum total load of insert baskets: 50 kg Distance between insert baskets: 50 mm   Operation: WEBPanel touch display with WEBSeason®   Remote control: via computer, smartphone, or tablet   Interfaces: Ethernet, USB, and digital I/O   Power connection: 3/N/PE AC 400 V ±10 %, 50 Hz; actual design according to nameplate   Other connection options according to instructions: 380 V / 50 Hz or optionally 440 V / 60 Hz Rated power: 31.9 kW Rated current: 57 A On-site protection: 63 A slow-blow fuse Protection class, control cabinet and operating unit: IP23   Cooling: water-cooled Cooling water connections: Supply and return, each 1" internal thread   Cooling water temperature: +12 to +28 °C Cooling water pressure: 2.5 to 6 bar Differential pressure, cooling water circuit: over 2 bar   Todpfoz Rwk Rox Airjd Cooling water consumption under full load with 18 °C inlet and 10 K heating: 2.9 m³/h Cooling water consumption under full load with 28 °C inlet and 5 K heating: 5.8 m³/h   Maximum heat dissipation to the cooling water: 33.7 kW Maximum heat dissipation to the installation room: 1 kW   Compressed air supply: 4 to 10 bar overpressure Compressed air connection: quick-release coupling DN 7.2 Compressed air temperature: +2 to +50 °C   Condensate drain: hose connection Ø 8 mm   Sound pressure level: approx. 63 dB(A)   Permissible ambient temperature during operation: +10 to +35 °C   Permissible relative humidity at the installation location: max. 75 %   Refrigerant: R449A 3.5 kg R469A 2.5 kg   Shipping or freight transport possible. Subject to changes, errors, and prior sale.   We will be happy to answer any further questions by telephone.

Condition: used, VÖTSCH Industrial drying cabinet / chamber dryer / chamber drying oven Vötsch VTL 75/100 Industrial convection drying cabinet up to 250 °C with 562 liters of usable volume For sale is a used industrial drying cabinet from Vötsch Industrietechnik GmbH, model VTL 75/100. The VTL 75/100 is an electrically heated chamber dryer for industrial drying, heating, and tempering processes. The VTL series is designed for drying processes with controlled exhaust air extraction and takes into account the safety requirements of EN 1539. The unit features a spacious drying chamber with removable wire mesh shelves, an insulated door with an all-round seal, and a side-mounted control and operating unit. Technical data: Manufacturer: Vötsch Industrietechnik GmbH Type: VTL 75/100 Equipment type: Industrial drying cabinet / chamber dryer Rated temperature: 250 °C Rated voltage: 3/N/PE AC 400 V ±10 %, 50 Hz Connected load: 20 kW Rated power: 18 kW Rated current: 29.0 A Usable volume: 0.562 m³ / 562 liters Steam volume: 0.998 m³ Minimum exhaust air volume flow: 240 m³/h Internal dimensions according to manufacturer: Width: approx. 750 mm Height: approx. 1,000 mm Depth: approx. 750 mm External dimensions according to manufacturer: Width: approx. 1,470 mm Height: approx. 1,900 mm Depth: approx. 1,210 mm Empty weight: approx. 475 kg The external dimensions and weight are manufacturer's specifications for the VTL 75/100 model size. Deviations may occur depending on the specific equipment. Equipment: Electrical heating Convection system with fan Exhaust system with fan and air duct JUMO dTRON 304 temperature controller Additional digital display and control unit Several removable wire mesh shelves Tsdpfx Aiez N Am Iered Insulated drying chamber Single-leaf door with all-round seal Side-mounted control cabinet with operating elements Main switch and indicator lights Electrical control and switching components Application areas: Industrial drying processes Drying of coatings and paints Heating and tempering of components Material testing and heat treatment Production and manufacturing processes Research and development Scope of supply: 1 x Vötsch VTL 75/100 industrial drying cabinet Wire mesh shelves as shown in the pictures Other equipment as shown in the pictures Condition: Used Optical condition as shown in the pictures Signs of wear and tear Shipping by freight forwarder is possible upon agreement. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.