Ferdinand Bilstein Gmbh

Condition: excellent (used), Brüel & Kjaer LDS Dactron Laser USB LAS 200 Type: LAS 200 LDS Dactron Vibration Testing and Shaker Control System including Acer laptop with installed software For sale is a used LDS Dactron LASER USB Shaker Control System, Type LAS 200. The system was last used in an industrial vibration testing facility and is suitable for electrodynamic shaker systems, vibration tests, resonance tests, random tests, and shock tests. Manufacturer / Model Manufacturer: LDS Dactron / Brüel & Kjær Type: LASER USB Model: LAS 200 Made in U.S.A. Software / Functions Installed software: Shaker Control Version 8.1001 Library Version 6.3120 Activated modules according to software display: Random Sine on Random Random on Random Swept Sine Resonance Search, Track and Dwell Sine Oscillator Classical Shock Shock Response Spectrum Long Time History Further activated options: Automatic Drive Notching / Limiting Real Time Data Exchange High Frequency Control Amplifier Controller Technical Data 8 active input channels 2 output channels Sampling Rate: 96 kHz A/D Resolution: 24 Bit USB Mode: 2.0 Input Type: Volt / ICP / TEDS Suitable for electrodynamic vibration testing systems and industrial shaker systems. Calibration Calibration data according to system display: Last calibration: 09/20/2023 Displayed due date: 09/19/2024 Kodpfxsy T Iv Hj Afpelt Dimensions / Weight Controller approx.: 430 x 350 x 90 mm (W x D x H) Controller weight: approx. 6 - 8 kg Scope of supply LDS Dactron LASER USB Controller Acer laptop with installed software Connection cables / accessories as shown in the pictures Condition Used equipment from industrial use. Optical condition see pictures. Normal signs of wear and tear and storage. System starts, software can be opened and the hardware has been recognized. No further tests were performed. Notes Sale exclusively to commercial customers. No guarantee or warranty. Subject to prior sale, errors and changes. We will be happy to answer any further questions by telephone or message.

Condition: excellent (used), Memmert Forced Convection Drying Oven / Heating Cabinet Manufacturer: Memmert GmbH + Co. KG Type: UFP 800 For sale is a used Memmert UFP 800 from commercial use. Technical data Type: UFP 800 Protection class: IP20 Standard: DIN 12880-KI 3.1 Temperature range: up to approx. 250 °C Connection: 3N~ 400 V / 50-60 Hz Power consumption: approx. 4800 W Current consumption: approx. 7 A External dimensions: approx. 1190 x 750 x 1620 mm Internal dimensions: approx. 1040 x 600 x 1200 mm Volume: approx. 749 liters Weight: approx. 170 kg Equipment Stainless steel interior Kljdsy T Idwepfx Afpst Forced convection operation Digital control Programmable operation possible Glass viewing doors Multiple insertion levels Movable on castors Condition Used equipment from commercial use. Optical condition see pictures. Normal signs of use and storage are present. Scope of supply Memmert UFP 800 heating cabinet Inserts / accessories as shown in the pictures Scope of supply exclusively as shown in the pictures. Notes Sale exclusively to commercial customers. Used item without guarantee or warranty. Subject to changes, errors and prior sale. We will gladly answer further questions by telephone or message.

Condition: excellent (used), Type: UF 450plus Airflow: forced recirculation Temperature Temperature range: +20 °C to +300 °C Operating range: at least +10 °C above ambient temperature Setting accuracy: – up to 99.9 °C: 0.1 °C – from 100 °C: 0.5 °C Temperature sensors: 2× Pt100 (DIN Class A, 4-wire) Interior and capacity Volume: 449 liters Internal dimensions (W × H × D): 1040 × 720 × 600 mm Maximum number of inserts: 8 Load per insert: 30 kg Maximum total load: 300 kg Interior: stainless steel, all-round heating External dimensions and weight External dimensions (W × H × D): approx. 1224 × 1247 × 784 mm Net weight: approx. 160 kg Gross weight: approx. 185 kg Electrical data Voltage: 400 V, 3-phase Power: approx. 5800 W Control and regulation Control: ControlCOCKPIT TwinDISPLAY Controller: digital PID microprocessor Timer: 1 minute to 99 days Functions: SetpointWAIT, HeatBALANCE, calibration at 3 temperature points Adjustable parameters: temperature, fan speed, exhaust flap, time programs Ventilation Recirculation: adjustable in 10% increments Fresh air: electronically adjustable Exhaust: with throttle valve Communication Interfaces: Ethernet, USB Kodpfxjy T Icts Afpolt Software: AtmoCONTROL Safety Temperature limiter (TB), protection class 1 Temperature monitor/limiter (TWW/TWB) selectable ASF system for over- and under-temperature monitoring Equipment Stainless steel door with 2-point locking Stainless steel housing Low-noise air turbine Rear has 2 openings each with an approx. 12 cm diameter. Condition: used Scope of supply: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Year of construction: 2014, functionality: not functional, Ishida model IX-G2-4027-H X-ray machine with rejection system, year of construction 2014. Kodpfxey Tl Erj Afpslt

Condition: excellent (used), LDS Vibration Testing System / Shaker System Type: V8-440 HBT750C Combo + SPA56K v3 Manufacturer: LDS Test & Measurement / IMV For sale is a complete electrodynamic vibration testing system consisting of an LDS shaker system, SPA56K v3 power amplifier, matching transformer PT65.0/3E, hydraulic unit, and IMV K2+ vibration controller. Suitable for vibration tests, shock tests, endurance tests, environmental simulation, automotive, aerospace, electronics testing, research & development, and industrial quality assurance. Shaker / Vibrator Manufacturer: LDS Test & Measurement Type: V8-440 HBT 750 COMBO Serial Number: 1324-000010 Year of Manufacture: 2007 Air-cooled electrodynamic vibrator. Sine force peak: 57.8 kN Random force peak: 60 kN Shock force peak: 264 kN Frequency range: 5 – 2500 Hz Armature diameter: approx. 440 mm Air-bearing and vibration-isolated heavy-duty system. Slip Table / Horizontal Table Type: HBT750C XX4 Mounting surface: 750 x 750 mm 2 hydraulic bearings available. Max. pitching moment: 32.17 kNm Max. rolling moment: 34.00 kNm Max. yawing moment: 24.69 kNm Thread pitch: 100 mm Threaded inserts: M10 Power Amplifier Manufacturer: LDS Test & Measurement Type: SPA56K v3 Serial Number: 1004913/1 Professional high-performance switching amplifier. Kodpfey S U Hiex Afpjlt Supply voltage: 50 Hz: 380 / 400 / 415 / 440 V 60 Hz: 380 / 400 / 415 / 440 / 460 / 480 / 500 / 520 V Current setting: 415 V Max. output power: 86.9 kVA Matching Transformer Manufacturer: LDS / Romarsh Ltd. Type: PT65.0/3E Serial Number: 07001 Power: 56 kVA Input voltage range: 0 – 100V AC Frequency range: 5 – 2500 Hz Controller IMV K2+ Vibration Control System Multi-channel vibration controller including software, data storage, license dongle, and documentation. Supported functions according to documentation: Sine Resonance search Noise Shock Sine-on-Random Random-on-Random Shock Response Spectrum Notching / Limiting Equipment Complete vibration and shock testing system HBT750C slip table included Hydraulic system included Matching transformer included Software package included Documentation included Dimensions / Weight Large industrial system / heavy-duty system Weight of shaker: approx. 2,000 – 2,500 kg Weight of power amplifier: approx. 800 – 1,200 kg Weight of matching transformer: approx. 500 kg Total weight of complete system: approx. 4,000 – 6,000 kg Transport only by a suitable heavy-duty transport company. Dimensions, weights, and technical data are partially estimated or not fully known. Condition Used industrial system from industrial use. Optical condition see pictures. Inspection and testing on-site possible by arrangement. Scope of supply LDS V8-440 HBT750C Combo Shaker LDS SPA56K v3 Power Amplifier Matching Transformer PT65.0/3E Hydraulic unit HBT750C Slip Table IMV K2+ Control System Software / Data Storage / License Dongle Documentation and accessories as shown in the pictures. Loading possible by arrangement. Commercial sale without warranty. Subject to changes, errors and prior sale.

Condition: good (used), UNHOLTZ-DICKIE / HS-Simulators Vibration Testing System Type: TA117SA-560 + HS 520 K 60 V Manufacturer: UNHOLTZ-DICKIE Corporation / HS-Simulators Horstmann GmbH For sale is a complete electrodynamic vibration testing system consisting of an UNHOLTZ-DICKIE shaker system, SALL50F power amplifier, VWIN II control system, and an HS-Simulators climate chamber. Ideal for combined vibration and climate testing in industrial, automotive, aerospace, electronics testing, as well as research and development applications. The hall crane / other hall equipment visible in the pictures is not included in the scope of supply. Shaker / Vibrator Manufacturer: UNHOLTZ-DICKIE Corporation Type: 560 System: TA117SA-560 Serial Number: 259 Air-cooled electrodynamic shaker Sine force: 6000 lbf peak / 26.7 kN peak Random force: 5200 lbf RMS / 23.1 kN RMS Max. acceleration of free table: 100 g / 981 m/s² Shaker stroke: 1 inch / 25.4 mm Axial resonance frequency: approx. 2200 Hz / approx. 2.2 kHz Armature effective weight: Kledpfx Asy S S Eijfpst 45 lb / approx. 20.4 kg Driver Coil: 200 A Sine 140 A Random Air-cooled and vibration-isolated system. Power Amplifier Manufacturer: UNHOLTZ-DICKIE Corporation Type: SALL50F Power Amplifier Serial Number: 4414 Power Module: PML-50-S Master Controller: MCLL50 Supply voltage: 400 V / 3 Phase / 50 Hz Power consumption: 41 kVA / 60 A Blower: 15 kVA / 22 A Maximum Driver Currents: 440 A RMS OUT SINE 300 A RMS OUT RANDOM Forced air cooling. Control System UNHOLTZ-DICKIE VWIN II DSP Vibration Control System including industrial PC / monitor as shown in the pictures Control Console: MA117SA-560 Serial Number: 1838 Charge Amplifier: Type 122P Serial Number: 8963 Supported test types: Random Vibration Sine Vibration Resonance Dwell Classical Shock Pulse SRS Shock & Analysis Sine-on-Random Random-on-Random Gunfire Interfaces: TCP/IP RS232 Ethernet USB HS-Simulators Climate Chamber Manufacturer: HS-Simulators Horstmann GmbH Type: HS 520 K 60 V Temperature range: -60 °C to +180 °C Electrical data: 380 V 17 A 10 kW Refrigerant: R13 R502 Features: Combined climate and vibration testing Complete electrodynamic testing system DSP-based real-time control Forced air cooling system Completely wired testing system Original documentation available: Operating Manual Maintenance Manual System Specifications System Diagrams Performance Curves Dimensions / Weight Amplifier: approx. 1000 x 537 x 825 mm Climate chamber: approx. 1200 x 1800 x 2000 mm Total weight estimated: approx. 2500 – 4000 kg Transportation only by a suitable heavy-duty transport company. Technical data partially estimated. Specifications may vary. Condition Used system from industrial application. Optical condition see pictures. Functionality not fully tested. Inspection possible and desired upon agreement. Scope of delivery UNHOLTZ-DICKIE shaker model 560 SALL50F power amplifier Control console / control system VWIN II controller system Charge amplifier HS-Simulators climate chamber HS 520 K 60 V Industrial PC / monitor as shown in the pictures Documentation and accessories as shown in the pictures Loading possible upon agreement. Commercial sale without warranty. Errors and prior sales excepted.

Condition: excellent (used), LDS / CTS Vibration Testing System Type: V850-440 LPT 750C + CTS CV-70/1100-5 Manufacturer: LDS / CTS / IMV For sale is a complete electrodynamic vibration testing system consisting of an LDS shaker system, an LDS SPA30KCE power amplifier, an IMV K2+ vibration controller, and a CTS climate chamber. Suitable for combined vibration and climate testing in the automotive, aerospace, electronics testing, research & development, material testing, and industrial quality assurance fields. The blue hall crane / portal crane visible in the pictures is not included in the scope of supply. Shaker / Vibrator Manufacturer: Ling Dynamic Systems Ltd. (LDS) Type: V850-440 LPT 750C Air-cooled electrodynamic vibrator. Armature diameter: 440 mm Frequency range: DC – 3000 Hz Resonant frequency: approx. 2200 Hz Sine force: approx. 22.2 kN peak Random force: approx. 22.2 kN RMS Shock force: approx. 66.7 kN peak Max. velocity: 2.0 m/s Displacement: 50.8 mm pk-pk Kjdpjy Sy Npsfx Afpolt Internal load capacity: approx. 350 kg Compressed air supply required: Load support: approx. 5.5 bar Air isolation: approx. 6.9 bar Shaker weight: approx. 1,300 kg Power Amplifier Manufacturer: LDS Type: SPA30KCE Class-D high-performance switching amplifier. Supply voltage: 50 Hz: 380 / 400 / 415 / 440 V 60 Hz: 380 / 400 / 415 / 440 / 460 / 480 / 500 / 520 V Current setting: 400 V Max. input power: 38.14 kVA Max. output power: 21.0 kW Output voltage: 100 V RMS Amplifier weight: approx. 550 kg Controller IMV K2+ Vibration Control System Multi-channel vibration controller including Dell Precision PC system. Functions: Sine Resonance dwell Limit control Random Sine-on-random PSD limit control Shock Scheduler System monitor CTS Climate Chamber Manufacturer: CTS Clima Temperatur Systeme GmbH Type: CV-70/1100-5 Year of manufacture: 10/2019 Temperature range: -70 °C to +180 °C Humidity range: 10 % to 95 % RH Rated voltage: 400 V / 3/N / 50 Hz Power: 15.9 kW Refrigerant: R452A: 6.8 kg R23: 2.1 kg Equipment Combined climate and vibration testing Slip table / Fixturing table included Completely wired testing system Service and maintenance documentation available Slip table: Mounting area: approx. 760 x 850 mm Threaded insert spacing: approx. 100 mm Dimensions / Weight Large industrial system / heavy-duty system. Total system weight: approx. 6,000 – 7,000 kg Transport exclusively via a suitable heavy-duty transport company. Dimensions, weights and technical data are partially estimated or not completely known. Condition Used industrial system from industrial use. Optical condition, see pictures. Inspection and testing on site possible by arrangement. Scope of supply LDS V850-440 LPT 750C shaker system LDS SPA30KCE power amplifier IMV K2+ vibration controller Dell Precision PC system CTS climate chamber CV-70/1100-5 Slip table / Fixturing table Accessories and documentation as shown in the pictures Not included in the scope of supply: Blue hall crane / portal crane. Loading possible by arrangement. Commercial sale without warranty. Subject to changes, errors and prior sale.

Year of construction: 2025, condition: like new (used), Binder MKF 720 E5 Climate Chamber, year 2025. Brand new, unused chamber with 3-year warranty on spare parts. The Binder MKF 720 E5 is a professional climate/environmental chamber designed for stability studies, temperature, and climate testing in compliance with DIN and IEC standards. The E5 series is part of Binder’s latest generation, featuring a touchscreen interface and advanced program control. Key features: * Temperature range: -40°C to +180°C * Humidity range: 10–98% RH Kedpfx Afoy Sg Nvspolt * Chamber volume: approx. 734 liters * APT.line™ preheating chamber technology * Ultra-fast temperature changes * Humidity control via capacitive sensor + steam humidification * Binder E5 touchscreen controller with segment and time programming * Integrated data logger + data export via USB * Ethernet interface * Heated inspection window with LED lighting * Automatic water supply and drainage management * Stainless steel interior chamber * Compressor cooling * Refrigerant: R-452A

Condition: like new (used), Year of construction: 2025, Device from 2025, like new. Two-year warranty on spare parts. Kjdpfxey R Tz As Afpolt The Binder KB 240 E6 is a professional refrigerated laboratory incubator with a compressor unit, designed for microorganism cultivation, stability studies, material testing, and sample storage at controlled temperatures. The E6 model, using R-134a refrigerant, is one of the most highly regarded generations in the KB series thanks to its excellent cooling performance and wide temperature range. Key features: * Temperature range: -10°C to +100°C * Chamber volume: approximately 247 liters * Compressor-based cooling * BINDER E6 controller with time programming * APT.line™ technology ensuring uniform temperature distribution * Inner doors made of tempered glass * Stainless steel chamber * 30 mm access port * RS422 interface / compatible with APT-COM™ Applications: * Incubation of microorganisms * Biological and pharmaceutical research * Stability testing * Sample storage * Material testing * Temperature simulation Technical specifications: * Capacity: approx. 247 L * Maximum temperature: 100°C * Power supply: 200–230 V * Power rating: approx. 1.2 kW Benefits of the KB E6 series: * Excellent temperature stability * Effective cooling below ambient temperature * High reliability * More energy-efficient than previous generations * Suitable for continuous operation in laboratories * Popular model for pharmaceutical and microbiological labs

Condition: good (used), Binder FED 400 Heat Cabinet Heat Cabinet / Drying Oven / Laboratory Furnace Industrial model with forced convection Manufacturer: Binder GmbH Model: FED 400 Design: Heat cabinet with forced convection For sale is a pre-owned Binder FED 400 heat cabinet from an industrial facility closure. This heat cabinet is suitable for laboratory, research, development, quality assurance, materials testing, as well as industrial applications. The unit features electronic temperature control, forced convection, and a stainless steel chamber in a robust industrial build. Technical Data (according to nameplate / manufacturer specifications): Manufacturer: Binder GmbH Model: FED 400 Version: E2 Serial-No.: 15-21306 Made in Germany Kedpjy R Axqsfx Afpslt Electrical Data: Operating voltage: 400 V Frequency: 50 / 60 Hz Power supply: 3 N~ Nominal power: 3.40 kW Current: 7.4 A Protection class: IP20 Temperature Data: Temperature range: up to 300 °C Forced convection Safety device according to DIN 12880 Class 2.0 External dimensions approx.: Width: 1235 mm Height: 1025 mm Depth: 765 mm Chamber dimensions approx.: Width: 1000 mm Height: 800 mm Depth: 500 mm Chamber volume: approx. 400 liters Weight (manufacturer information): approx. 145 kg Equipment: Binder FED 400 heat cabinet Forced convection Digital temperature control Electronic controller Stainless steel chamber Double-leaf doors Removable shelves Rear exhaust port Industrial and laboratory design Condition: Used equipment with typical signs of age and use. Visual condition as shown in photos. The device is from ongoing operation. Scope of delivery: Binder FED 400 heat cabinet Removable shelves Scope of delivery as pictured Notes: Inspection possible by prior appointment. Actual technical data, dimensions, weights, and features may vary. Information without guarantee. Subject to prior sale. Commercial sale – sold without warranty.

Condition: used, functionality: unexamined, Complete metal testing and materials testing laboratory Industrial quality assurance/testing laboratory as a complete package A fully equipped professional metal and materials testing laboratory from the industrial QA sector is for sale. The package includes, among others: OES metal analysis, universal testing machine, technical cleanliness analysis according to VDA 19 / ISO 16232, metallography equipment, hardness testing, coating thickness measurement, laboratory scales, water analysis, laboratory devices, extensive Köttermann laboratory furnishings, and consumables. Manufacturers include: AMETEK/SPECTRO, GALDABINI, JOMESA, Struers, Fischer, List, Ernst, Zeiss, KERN, Mettler, IKA, Memmert, Macherey-Nagel, Hanna, WTW, and Köttermann. Key features: - AMETEK / SPECTRO SPECTROTEST TXC02 UV portable OES metal analyzer - GALDABINI QUASAR 100 universal testing machine / tensile tester 100 kN - JOMESA filter analysis system for technical cleanliness in accordance with VDA 19 / ISO 16232 - Struers TransPol-5 portable metallographic grinding and polishing system - Struers Rotopol-2 metallographic grinding and polishing machine - Fischer DELTASCOPE FMP30 coating thickness measuring system - List-Magnetik MEGA-CHECK Master coating thickness gauge - Ernst Computest SC portable hardness testing system - Carl Zeiss Jena Neophot metallographic reflected light microscope - Köttermann fume hoods, laboratory benches, hazardous materials cabinets, and chemical cabinets - Extensive laboratory consumables, laboratory glassware, and accessories Kodsy Rglnjpfx Afpjlt Complete object description can be found in the documents.

Condition: good (used), KÖHLER Corrosion Test System HK-400 Manufacturer: KÖHLER Type: presumed HK-400 Control System: ADWEST KÖHLER PC102 Marking: SSK_Köhler_0400-01 PN: 1356 For sale is a KÖHLER corrosion test system suitable for salt spray, condensation, and corrosion tests in industry, research, development, and quality assurance. Klsdpfx Afoy N R Tajpst The unit is designed for testing components, coatings, metal parts, and technical assemblies under corrosive environmental conditions. Visually, the system corresponds to a KÖHLER HK-400 model for salt spray and condensation testing. Technical specifications: Test chamber volume: approx. 400 liters Internal dimensions: approx. 1020 × 750 × 500 mm External dimensions: approx. 1970 × 1050 × 600 mm Temperature range: ambient +10 °C to approx. +55 °C Voltage: 220 V / 50 Hz Equipment/features: ADWEST KÖHLER PC102 control system Digital display unit Stainless steel test chamber Viewing window in the door Multiple test grids / shelves Integrated pressure gauges Connections for test media supply Industrial-grade construction Possible test procedures: Salt spray testing Condensation water testing Kesternich corrosion testing Corrosion testing on coatings and metal parts Automotive and industrial test applications Condition: Used equipment with signs of age and use. Visual condition as shown in the pictures. Important note: The original manufacturer's nameplate was not present on the unit. The technical data was compiled based on existing markings, pictures, and comparable KÖHLER HK-400 manufacturer information. Scope of delivery: System as shown All included items according to the pictures. Other notes: Inspection by appointment is possible. Loading can be arranged. Commercial sale – Sale without warranty. (Specifications subject to change and errors excepted.)

Condition: good (used), ESPEC Climate Test Chamber PL-3KPH Manufacturer: ESPEC Corp. Model: PL-3KPH Design: Air-cooled temperature and climate test chamber For sale is a used ESPEC climate test chamber for temperature and climate testing in research, development, quality assurance, and industrial applications. Technical Data: Test chamber volume: approx. 400 liters Temperature range: approx. -40 °C to +180 °C Humidity range: approx. 20% to 98% RH Internal dimensions (W x H x D): approx. 600 × 850 × 800 mm External dimensions (W x H x D): approx. 1010 × 1690 × 1195 mm Electrical connection: AC 400 V / 3~ / 50 Hz Max. current draw: approx. 11 A Weight: approx. 350 kg Cooling: Air-cooled No external water connection required Refrigerant as per label: R452A – approx. 1.2 kg Features: Touchscreen control Programmable and constant operation modes Temperature and humidity control Observation window in the door Stainless steel test chamber Interior lighting / chamber lamp Side cable/pipe port, approx. Ø 100 mm Overheat protection Integrated hour meter RS-232C interface Water tank system Specimen power supply control Time signal connection Condition: Used machine with signs of age and use. Partial rust and corrosion present in the lower housing area. Interior with usage marks. See images for visual condition. Scope of Delivery: Kledpsy N Awqofx Afpjt ESPEC Climate Test Chamber PL-3KPH One shelf included Delivery as shown Service: Function check and replacement of necessary components Refilling with legally compliant refrigerant if required Leak test with certificate Documented test run Notes: Inspection possible by arrangement. Loading can be organized. Commercial sale – Sold as-is without warranty. Subject to change and error.

Condition: good (used), Feutron Temperature Test Chamber: -40 to +100°C Thanks to its robust construction, the Feutron TPK 3403/125 is a workhorse for standardized temperature testing. The primary areas of application for this model are: 1. Electronics and Component Testing This is the most common area of ​​application. It focuses on how components react to extreme temperatures: Functional Testing: Does the circuit board continue to operate flawlessly even at -40°C or +150°C? Burn-In Testing: Artificial aging of components through continuous operation at high temperatures to induce early-stage failures. 2. Materials Testing Investigation of physical changes in materials: Brittleness: Do plastics or rubber seals become brittle in cold conditions? Deformation: Do composite materials warp when exposed to heat? Storage Testing: How stably do chemical substances or adhesives behave over extended periods at a constant temperature? 3. Quality Assurance (QA) Sample Testing: In-process testing conducted alongside production to ensure that manufacturing output adheres to specified temperature ranges. Standards Compliance Testing: Conducting tests in accordance with common industry standards (e.g., DIN EN 60068) that prescribe specific temperature profiles. 4. Research & Development Prototyping: Testing new housing designs or materials under controlled thermal conditions prior to mass production. Manufacturer: Feutron Model: TPK 3403/125 Temperature Range: -40 to +100°C Refrigeration System: Air-cooled condenser Temperature Stability: approx. ±0.1 to ±0.5 K Usable Chamber Volume: approx. 125 liters Refrigerant: R22 Operating Pressure: 23 bar Power Supply: 220/280V-3-50Hz Input Fuse Rating: 25 A Protection Class: IP 20 Ksdpfxjy Nynao Afpelt Weight: 480 kg "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find additional items—both new and used—in our shop! International shipping costs available upon request!

Condition: excellent (used), Binder Temperature Test Chamber Type: MK240-400V Manufacturer: Binder Klsdpjy Nic Hofx Afpjt For sale is a Binder MK 240 temperature test chamber suitable for professional heat and cold testing in industry, research, development, and quality assurance. Binder’s MK series temperature test chambers are particularly well-suited for cyclic temperature testing and reproducible tests under defined environmental conditions. The test chamber enables temperature testing in a range from -40 °C to +180 °C, providing an efficient alternative to custom solutions. Technical specifications: Temperature range: -40 °C to +180 °C Test chamber volume: approx. 228 liters Temperature performance data: Spatial temperature deviation: 0.1 to 1.2 ± K (depending on setpoint) Temporal temperature deviation: 0.1 to 0.5 ± K (depending on setpoint) Heating rate: approx. 5.0 K/min Cooling rate: approx. 4.5 K/min Cooling time from +180 °C to -40 °C: approx. 110 minutes Test chamber: Internal dimensions: approx. 735 x 700 x 443 mm (W x H x D) Dimensions: External dimensions: approx. 1115 x 1710 x 925 mm (W x H x D) Load capacity: Max. load per shelf: approx. 30 kg Max. total load: approx. 70 kg Features: 2 x feedthroughs Ø 70 mm 1 door 2 standard shelves / up to 6 shelves possible Electrical data: Rated voltage: 400 V Mains frequency: 50 Hz Rated power: approx. 4.0 kW Protection: 16 A Phases: 3~ Weight: approx. 320 kg Buyer safety: The following steps are carried out on all chambers we offer before sale: 1. Functional check and replacement of necessary components 2. If required, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: Used Scope of delivery: Scope of delivery as shown in the pictures Inspection possible by appointment. Loading can be organized. Sale without warranty. (Specifications subject to change and errors excepted)

Condition: excellent (used), Binder Temperature Test Chamber Type: MK240-400V Manufacturer: Binder For sale is a Binder MK 240 temperature test chamber designed for professional heat and cold testing in industrial settings, research, development, and quality assurance. The temperature test chambers from Binder’s MK series are particularly suited for cyclic temperature tests and reproducible testing under defined environmental conditions. This test chamber enables temperature testing within a range from -40 °C to +180 °C, providing an efficient alternative to custom-built solutions. Technical specifications: Temperature range: -40 °C to +180 °C Test chamber volume: approx. 228 liters Temperature performance data: Spatial temperature deviation: 0.1 to 1.2 ± K Temporal temperature deviation: 0.1 to 0.5 ± K Heating rate: approx. 5.0 K/min Cooling rate: approx. 4.5 K/min Cooling time from +180 °C to -40 °C: approx. 110 minutes Test chamber: Internal dimensions: approx. 735 x 700 x 443 mm (W x H x D) Dimensions: External dimensions: approx. 1115 x 1710 x 925 mm (W x H x D) Load capacity: Max. load per shelf: approx. 30 kg Max. total load: approx. 70 kg Features: 2 x access ports Ø 70 mm 1 door 2 standard shelves / up to a maximum of 6 shelves possible Electrical data: Rated voltage: 400 V Kledpfx Aey Nicmsfpet Line frequency: 50 Hz Rated power: approx. 4.0 kW Circuit protection: 16 A Phases: 3~ Weight: Approx. 320 kg Condition: Used Scope of delivery: As shown in images Viewing by appointment possible. Loading can be arranged. Sale without warranty. (Specifications and technical details subject to change and error.)

Condition: excellent (used), Weiss Temperature Test Chamber Model: WT3-600/70/5 Manufacturer: Weiss Umwelttechnik For sale is a high-quality Weiss WT3-600/70/5 temperature test chamber, suitable for professional temperature testing in industry, research, development, and quality assurance. The unit features a modern S!MCON / 32 control system with a touch panel for convenient operation and programming of the test procedures. This temperature chamber is water-cooled and designed for demanding temperature tests in the range of -70 °C to +180 °C. Features: Ksdpfx Afoy Nibpopolt - S!MCON / 32 control system - Control panel with touch panel - Adjustable leveling feet - Feedthroughs on left and right sides - R1 feedthrough NW 125 mm - L1 feedthrough NW 50 mm - Test chamber illumination - Water-cooled version Technical Data: - Temperature range: -70 °C to +180 °C - Test chamber volume: approx. 600 liters - Internal dimensions: approx. 800 x 950 x 800 mm (W x H x D) Temperature Performance Data: - Temporal temperature deviation: ± 0.1 to ± 0.5 K - Spatial temperature deviation: ± 0.5 to ± 1.5 K - Heating rate: approx. 7.5 K/min - Cooling rate: approx. 7.5 K/min - Heat compensation: max. 2500 W Electrical Data: - Mains connection: 3/N/PE AC 400 V ±10% / 50 Hz - Rated current: approx. 23 A - Rated power: approx. 13 kW - Fuse protection: 16 A slow-blow Refrigerants: - R404A / R23 Dimensions: With hinges and door lock: approx. 1090 x 1995 x 1660 mm (W x H x D) Without hinges and door lock: approx. 1000 x 1995 x 1660 mm (W x H x D) Weight: - approx. 620 kg Sound Pressure Level: - approx. 58 dB(A) Condition: - Used Scope of Delivery: - As per photos Viewing by appointment possible. Loading can be organized. Sale without warranty. (Subject to changes and errors)

Condition: excellent (used), CTS Climate Test Chamber C-70/600 Type: C-70/600 Manufacturer: CTS Klima Temperatur Systeme Design: water-cooled For sale is a CTS climate test chamber for temperature and climate testing in industrial, research, development, and quality assurance applications. Condition / Display: Used unit, cosmetic condition as shown in the pictures. Display in manual mode / stop. Actual temperature: 16.59 °C Set temperature: 5.00 °C Actual humidity: 39.7% r.h. Water reservoir: 11.0 l Special features: Extended temperature range up to +210 °C (many standard models up to only +180 °C) Technical specifications: Temperature range: -70 °C to +210 °C Humidity range: 10% to 98% r.h. Dew point range: -10 °C to +94 °C Temperature change rate: approx. 2.5 K/min (heating/cooling) Kedpfx Asy I Tdxefpslt Test chamber volume: approx. 600 liters Electrical data: Connection: 400 V / 3/N / 50 Hz Rated power: approx. 9.0 kW Rated current: approx. 14.6 A Protection class: IP 22 Refrigeration system: Refrigerants: R452A / R23 Cascade refrigeration system for low temperatures down to -70 °C Pressure data: Operating overpressure: 25 bar Test pressure: 27.5 bar Test chamber: internal dimensions: approx. 850 x 850 x 830 mm Dimensions: approx. 1900 x 1115 x 1850 mm Weight: approx. 800 kg (depending on configuration) Equipment: Observation window Stainless steel test chamber Digital set/actual value display Specimen protection / temperature limiter DI water connection Condensate drain Tube ports RS232 interface Digital outputs for test specimen control Scope of delivery: CTS climate test chamber C-70/600 Scope of delivery as pictured Service / Preparation: Function check and replacement of necessary components Refilling with compliant refrigerant (if required) Leak test with certificate Documented test run Miscellaneous: Inspection by appointment possible Loading can be arranged Commercial sale – sold as is, without warranty. (Subject to change and errors excepted)

Condition: excellent (used), CTS Temperature Shock Test Chamber Type: TSS-70/32 Manufacturer: CTS Klima Temperatur Systeme Version: air-cooled For sale is a CTS temperature shock test chamber designed for thermal cycling and shock testing in industrial, research, and development settings. Technical Specifications: Test chamber volume: approx. 32 liters Max. test specimen weight: approx. 10 kg Temperature ranges: Hot chamber: +50 °C to +200 °C Cold chamber: -80 °C to +100 °C Performance data: Heating rate: approx. 6 K/min Cooling rate: approx. 6 K/min Temperature change rate: up to approx. 100 K/min Transfer time: < 10 seconds Temperature deviation: ±1 K / ±2 K Electrical data: Connection: 400 V / 3/N / 50 Hz Rated power: approx. 9.7 kW Rated current: approx. 15.4 A Fuse: 16 A slow-blow Protection rating: IP 22 Refrigerants: R404A: 2.3 kg R23: 0.90 kg Pressure data: Operating overpressure: 25 bar Test pressure: 27.5 bar Dimensions: approx. 1325 x 2012 x 1820–2020 mm (W x D x H) Weight: approx. 650 kg Additional data: Sound pressure level: < 58 dB(A) Compressed air connection: 1/4" external thread Kodpfey I Ntcjx Afpolt Equipment: Two-chamber system (hot/cold chamber) Digital CTS controller Display / control panel Program mode Operating hours counter Observation window Interior lighting Temperature limiter Specimen protection RS232 interface Documentation: Declaration of conformity available Test certificates available Operating manual available Wiring diagram available Piping diagram available Quick guide available Safety data sheets available Note: The table shown in the photos is not included in the sale. Condition: Used Visual condition as seen in the pictures Scope of delivery as pictured Inspection by appointment possible. Loading can be arranged. Commercial sale. Sold without warranty. (Subject to change and error)

Year of construction: 2019, operating hours: 3,577 h, condition: excellent (used), Weiss Climate Test Chamber ClimeEvent C/1000/70/5 Type: C/1000/70/5 Manufacturer: Weiss Technik GmbH Year of manufacture: 2019 Design: water-cooled Operating hours: approx. 3,577 h For sale is a Weiss ClimeEvent climate test chamber with a 1,000-litre test volume. Suitable for temperature and climate testing in the industrial, automotive, electronics fields, as well as research and development. Temperature and climate data: - Temperature range: approx. -70 °C to +180 °C - Temperature change rate: up to approx. 5 K/min - Humidity range: approx. 10% to 98% RH Test chamber: - Volume: approx. 1,000 litres - Internal dimensions: approx. 950 x 1,100 x 950 mm Dimensions: - External dimensions: approx. 2,000 x 1,415 x 2,030 mm Electrical data: - Mains connection: 3/N/PE AC 400 V ±10% / 50 Hz - Rated power: approx. 21 kW - Rated current: approx. 34 A Refrigerants: - R449A - R23 Weight: - approx. 1,300 kg Applications: - Temperature testing - Climate testing with humidity - Thermal cycling tests - Continuous load tests Condition: - Used - Device was in operation until recently Scope of delivery: - Weiss ClimeEvent C/1000/70/5 - Accessories as shown in the pictures Inspection possible by appointment. Loading can be organised. Sale without warranty. Kodpfx Aey Iyx Asfpolt (Subject to prior sale and alterations.)

Condition: excellent (used), Vötsch Temperature Shock Test Chamber Model: VT 7012 S2 Manufacturer: Vötsch Industrietechnik GmbH Design: Water-cooled For sale is a Vötsch temperature shock test chamber in a two-chamber configuration, designed for rapid temperature cycling tests. Suitable for use in industry, automotive, aerospace, as well as research and development. Klodpfey Iyuwox Afpst Temperature Ranges: Hot Chamber: +50°C to +220°C Cold Chamber: -80°C to +70°C Temperature Data: Temporal temperature deviation: ±1 K Spatial temperature deviation: ±2 K Heating rate (hot chamber): approx. 11 K/min Heating rate (cold chamber): approx. 2 K/min Cooling rate: approx. 3 K/min Test Area: Volume: approx. 125 liters Internal dimensions: approx. 470 x 650 x 410 mm Cable port: Ø 67 mm Electrical Data: Connection: 3/N/PE AC 400 V ±10% / 50 Hz Rated power: approx. 10 kW Rated current: approx. 25 A Refrigerants: R404A: 2.9 kg R23: 1.27 kg Pressure Data: Low pressure max.: 22.5 bar High pressure max.: 25 bar Dimensions: Approx. 930 x 2115 x 1970 mm Weight: Approx. 1000 kg Equipment/features: Two-chamber shock test system Digital control Programmable operation Observation window Cable port Condition: Used Control system overhauled and newly rewired Control panel replaced Spindle and spindle motor replaced Plate heat exchanger insulated Scope of delivery: Vötsch VT 7012 S2 temperature shock test chamber Accessories as shown in the pictures Inspection by appointment possible. Loading can be arranged. Sold as-is, without warranty. (Subject to prior sale and technical modifications)

Condition: excellent (used), LDS / CTS Vibration Test System Model: V895-440 HBT SP + CTS CV-70/1700-10 Manufacturer: Ling Dynamic Systems (LDS) / CTS For sale is a complete electrodynamic vibration test system consisting of an LDS shaker, SPA56K power amplifier, K2+ control system, and CTS climate chamber. Ideal for combined vibration and environmental testing in industrial, automotive, aerospace, as well as research and development applications. Shaker / Vibrator Manufacturer: Ling Dynamic Systems Ltd. (UK) Model: V895-440 HBT SP Air-cooled vibrator Armature diameter: 440 mm Frequency range: DC – 2100 Hz Sine force: 55.6 kN Shock force: 166.8 kN Max. acceleration: 981 m/s² Max. velocity: 1.6 m/s Kjdpfjy Iwp Sjx Afpslt Displacement: 63.5 mm pk-pk Payload: approx. 700 kg Air-bearing and vibration-isolated system. Compressed air supply required. Power Amplifier Manufacturer: LDS Model: SPA56K v3 V890/5 Class-D high-performance switching amplifier Air-cooled industrial version Mains voltage: 415 V Max. power consumption: 86.9 kVA Efficiency: > 90 % Controller display: Amplifier: SPA8/16K_v3 Vibrator: V830_185 Control System IMV K2+ vibration control system Multi-channel control system Including Dell Precision PC system, monitor, keyboard, and mouse CTS Climate Chamber Manufacturer: CTS Clima Temperatur Systeme Model: CV-70/1700-10 Year of manufacture: 03/2020 Temperature range: -70 °C to +180 °C Humidity range: 10% to 95% r.h. Volume: approx. 1700 liters Rated voltage: 400 V / 3/N / 50 Hz Power: 21.9 kW Rated current: 37.1 A Refrigerant: R452A: 9.5 kg R23: 3.7 kg Equipment Combined climate and vibration testing Slip table / mounting table included Vibration-isolated installation Programmable operation possible Slip Table 760 mm x 850 mm Threaded insert spacing: 100 mm Activated Licenses: Excitation modes Sine, resonance dwell, limit control, amplitude dwell Multi sweep sine, noise soft-clipping, sine-on-random PSD limit control, shock Extensions Scheduler, multi-language, launcher, system monitor Weight Shaker: approx. 3.0 – 3.2 t Total weight: approx. 6,000 – 7,000 kg Condition Used system System was last in operation System starts / control active Inspection under power possible Scope of delivery LDS V895-440 HBT SP shaker LDS SPA56K amplifier IMV K2+ system Complete PC system CTS climate chamber Accessories per photos Loading possible. Sale without warranty. Subject to prior sale and changes.

Condition: excellent (used), CTS Climate Test Chamber C-70/1000-S Device Data Manufacturer: CTS GmbH Model: C-70/1000-S Year of manufacture: 08/2011 Serial number: 113054 Type: Climate test chamber / Environmental simulation chamber Cooling: Water-cooled Description Used CTS climate test chamber for precise temperature and climate testing. Suitable for material, component, and reliability testing. Applications in industry, research, development, and quality assurance. Temperature and Climate Data Temperature range: -70 °C to +180 °C Temperature change rate: approx. 2.5 K/min heating Temperature change rate: approx. 2.5 K/min cooling Humidity range: 10% to 98% RH Dew point range I: +7 °C to +94 °C Dew point range II: -10 °C to +7 °C Electrical Data 400 V / 3/N / 50 Hz Power: 9.7 kW Current: 17.9 A Protection class: IP 22 Cooling System Refrigerants: R404A / R23 Pre-cooling stage: R404A, 2.3 kg Cooling stage: R23, 0.86 kg / 15 bar Operating overpressure PS: 25 bar Test pressure PT: 27.5 bar Features CTS control unit with LCD display Programmable operation Digital setpoint/actual value display Viewing window in door Stainless steel test chamber Test specimen protection / temperature limiter Interior lighting Cable ports on the sides Feedthroughs approx. 50 mm and approx. 125 mm RS232 interface as per documentation Digital outputs for test specimen control Mobile design on castors Dimensions Test chamber volume: approx. 1000 liters External (W x D x H): approx. 2245 x 1270 x 1950 mm Installation size (W x D x H): approx. 2350 x 1290 x 2000 mm Weight Test chamber: approx. 1000 kg Recooler: approx. 120 kg Documentation Declaration of conformity Test certificates Operating manual Error messages and digital channels Site plan Quick guide Humidity diagram Scope of Delivery CTS Climate Test Chamber C-70/1000-S Documentation as available Scope of delivery as shown Optional Pre-delivery Service Function test Refrigerant service Leak test Test run with protocol Condition Used. Condition as per photos. Kjdpfx Afoy Iam Hopelt Note Used equipment, sold without warranty. Inspection possible by appointment. Loading and transport can be organized on request. Subject to prior sale and technical changes. If you have any questions, please feel free to contact us.

Condition: excellent (used), RS-Simulatoren Temperature Shock Chamber ST2K 1000 / 55 The system was regularly serviced and maintained by the manufacturer until it was decommissioned. Equipment Data Manufacturer: RS-Simulatoren Model: ST2K 1000 / 55 Design: Temperature shock chamber Cooling: Water-cooled Description Used temperature shock chamber for standard-compliant thermal shock testing. Suitable for material, component, and reliability testing. Used in industry, automotive, research, and quality assurance. System Description • 2 separate temperature chambers (hot/cold) • Automatic horizontal transfer of test basket • Rapid switch operation for temperature shock testing Temperature Ranges Hot chamber: +40 °C to +180 °C Cold chamber: -70 °C to +100 °C Time deviation: ±0.8 K Kledoy H Igfepfx Afpjt Test Chamber Volume: approx. 580 liters Internal dimensions (W x H x D): approx. 1070 x 680 x 800 mm Max. load: approx. 150 kg Power Supply 400 V / 3~ / N / PE / 50 Hz Power: max. 33 kVA Current draw: max. 65 A Media Connections Cooling water: G 1", approx. 3 bar (max. 10 bar) Cooling water consumption: max. 3.2 m³/h Cooling water return: zero pressure Compressed air: NW 7.2, 4–10.5 bar Dimensions External (W x H x D): approx. 2800 x 2400 x 2200 mm Weight approx. 2800 kg Equipment Features • Horizontal basket movement • C-rails in test chamber • Large test basket (>1000 mm) • Observation window • Interior lighting • SE-604 controller • Program operation and data logging • RS232 interface Refrigeration System Refrigerants: R449A / R23 R449A: approx. 8.0 kg R23: approx. 2.5 kg Operating Data Operating hours: approx. 4,500 hrs Sound level: approx. 67 dB(A) Ambient Conditions Temperature: +12 °C to +30 °C Humidity: 25 % to 75 % rH Scope of Delivery RS-Simulatoren Temperature Shock Chamber ST2K 1000 / 55 Scope of delivery as shown Optional service before delivery: • Function test • Refrigerant service • Leak test • Trial run with protocol Condition Used. Condition as shown in the pictures. Note Used equipment, sold without warranty. Inspection possible by appointment. Loading and transport can be organized upon request. Subject to change and prior sale. If you have any questions, please feel free to contact us.

Condition: excellent (used), RS-Simulatoren Climate Chamber KSS 600/75-10K Device Data Manufacturer: RS-Simulatoren Prüf- und Messtechnik GmbH Model: KSS 600/75-10K Design: Climate Test Chamber / Environmental Simulation Chamber Cooling: Water-cooled Description Used climate test chamber from RS-Simulatoren. Suitable for temperature tests, climate tests, material, and aging tests. For use in industrial testing and measurement applications. Technical Data Temperature range: -75 °C to +180 °C Temperature change rate: heating/cooling approx. 10 K/min Test chamber volume: approx. 600 liters Dimensions Internal (W x D x H): 840 x 840 x 840 mm External (W x D x H): 1200 x 1600 x 1995 mm Electrical Data 400 V / 3~ / N / PE Current consumption: approx. 55 A Refrigeration System Refrigerants: R404A / R23 R404A: 6.0 kg R23: 3.0 kg Weight approx. 1,400 kg Equipment - RS-Simulatoren control / operating panel - Programmable operation - Observation window - Temperature monitoring in the test chamber - Operating hours counter - Side feedthrough - Robust industrial design Scope of Delivery - RS-Simulatoren climate chamber KSS 600/75-10K - Delivery as shown Service before delivery (optional) Kljdpfx Aoy H Ib Aofpst - Functional test - Refrigerant service - Leak test - Test run with protocol Condition Used. Condition as per images. Note Used device, sold without warranty. Inspection possible by arrangement. Loading and transport can be organized upon request. Subject to prior sale and changes. If you have any questions, please feel free to contact us.