Tonko SR

Condition: used, Rebar Bending Machine, Reinforcing Steel Bender, Alba DAR 45, Used Machine Manufacturer: Alba (Spain) Type: DAR 45 (Dobladoras Automáticas) Overall dimensions: Width: 1300 mm Depth: 800 mm Height: 830 mm Weight: 555 kg Electrical data: 400 V Maximum bending diameter: Ø 45 mm (single bar, for 450 N/mm² steel grade) Duedpey Rh Rfefx Aa Not Bending speed: 2 speed settings (higher speed for smaller diameters)

Condition: used, Year of construction: 2006, functionality: fully functional, type of input current: three-phase, type of cooling: water, input voltage: 380 V, Carrier, total of 9 units with valves and pumps. Types: 1x 30HXC080-A0367-PEE, Year of manufacture: 2005 Duedpfxsy Rh N Io Aa Njt 2x 30HXC080-A0380-PEE, Year of manufacture: 2006 1x 30HXC090-A0493-PEE, Year of manufacture: 2015 2x 30HXC090-A0231-PEE, Year of manufacture: 2006 2x 30HXC100-A0248-PEE, Year of manufacture: 2006 1x 30HXC110-A0267-PEE, Year of manufacture: 2006

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Tilting Spindle Moulder MAKA SF 4510 / GRIGGIO with Power Feed Very good condition, the machine comes from a small village carpentry shop with 3 people. Everything works perfectly. All bearings and guides are in excellent condition; the machine runs very smoothly. Equipped with a moulder fence, with one fence jaw adjustable in depth and featuring fine adjustment with scale, enabling jointing work, e.g., for a glue joint profile. The entire fence can also be adjusted via a set screw, allowing for very precise settings. With spindle locking via clamping lever. Chip extraction is very effective, with two 120mm diameter extraction ports on the fence and machine. Comes with a 30mm spindle, continuously tiltable from -5° to 45°, adjusted via handwheel, with a precise degree scale. Selectable clockwise/counterclockwise rotation. We deliver the machine in person anywhere in Germany for 220.00 EUR and carry out a demonstration, so you have no risk with your purchase. Delivery to other EU countries is also possible. Large table opening, adjustable with rings (this allows the use of cutters with a very large diameter and safe cutting with small cutters). Spindle speeds: 3200, 4200, 6000, and 8000 rpm. Spindle height adjustment via handwheel with locking screw. Spindle is exchangeable (a 40mm spindle can also be used). Optimal power transmission via V-belt drive. Machine table is 1070mm wide and 940mm deep. The machine is ready for immediate use. 380V, 5500W, with motor protection switch against overload. Year of manufacture: 1999. Dusdpfx Aoy Rh Nzoa Not Weight: approx. 700kg. The machine has a CE certificate. Comes with manual, motor brake, and emergency stop switch, fully compliant with all requirements of the woodworking trade association (Holz-BG). Included is also a 3-roller power feed from HAFFNER with 8 speeds. Optimal, simple, fast, and safe operation.

Condition: used, Rebar Bending Machine, Reinforcing Steel Bender, Peddinghaus Perfekt 42 CA, Used Machine Dujdey Rh Nuopfx Aa Nst Manufacturer: Peddinghaus Type: Perfekt 42 CA Overall dimensions: Width: 1270 mm Depth: 750 mm Height: 870 mm Weight: 511 kg Electrical data: 400 V; 10 A Maximum bending capacity: Ø 42 mm (single bar) Bending speed: 2 speed settings Control system: Automatic angle adjustment, foot pedal operation

Condition: good (used), functionality: fully functional, fuel type: diesel, Year of construction: 1999, operating hours: 10,200 h, Equipment: all wheel drive, cabin, Kawasaki 85Z2 wheel loader, weight 19,200 kg, year of manufacture 1999. The loader is in good condition and ready for operation. Location: Ampfing, Bavaria. Transport and delivery possible. Inquiries welcome at any time. Dsdpfxsy Rh I Rs Aa Neut

Condition: excellent (used), mileage: 1,60,140 km, power: 92 kW (125.09 HP), first registration: 03/2003, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: silver, driver cabin: day cab, gearing type: mechanical, emission class: euro3, suspension: steel, total length: 7,100 mm, total width: 2,200 mm, total height: 3,220 mm, loading space length: 4,900 mm, loading space width: 2,100 mm, loading space height: 2,200 mm, Year of construction: 2003, Equipment: tail-lift, General Information Cab: single Technical Information Engine displacement: 2,953 cc Axle Configuration Suspension: leaf spring suspension Front axle: steered Rear axle: twin tyres Weights Unladen weight: 2,930 kg Payload: 570 kg Gross vehicle weight: 3,500 kg Functional Tail lift: tailgate, 2,000 kg Dujdpfsy Rh I Dox Aa Not Condition Technical condition: very good Optical condition: very good Further information Contact Thierry Leemans for more information.

Condition: excellent (used), functionality: fully functional, Machine Data Machine Type: Vertical Slotting Machine Manufacturer: WMW MEUSELWITZ Model: STSR 400 Year of Manufacture: 1970 Control Type: Conventional Country of Origin: Germany Technical Specifications Max. Ram Stroke: 450 mm Work Table Diameter: 800 mm Min. Ram Stroke: 65 mm Max. Workpiece Height: 600 mm Ram Adjustment: 600 mm Ram Strokes per Minute: 18; 22; 28; 35; 45; 56 Ram Head Adjustment: +/- 15° mm Table Cross Travel: 800 mm Table Longitudinal Travel: 1000 mm Table Rotation: 360° Table Feed per Stroke: 0.14 - 0.22 - 0.35 - 0.56 - 0.9 - 1.4 mm/stroke Total Connected Load: 7.8 kW Dusdpfey Rh Iqjx Aa Nst Machine Weight (approx.): 6.25 t Machine Dimensions (LxWxH approx.): 2.8 x 1.9 x 3.0 m Additional Information Further Features: Ram: - Tool holder adjustable up to 900 mm reach - Bed overhang = 700 mm - 3-jaw chuck Rapid traverse for both axes as well as rotary table Accessories are to be sold separately (see photo). Storage and Delivery Conditions Shipping Terms: Ex location, without dismantling and unpacked Storage Location: Rostock Availability: Immediately Subject to technical modifications, errors and prior sale.

Condition: new, Year of construction: 2026, number of rollers: 3, roller (bottom) diameter: 190 mm, roller (top) diameter: 190 mm, side roll diameter: 190 mm, working width: 1,550 mm, sheet thickness steel (max.): 9 mm, number of digital displays: 2, Equipment: cone bending device, emergency stop, hardened rollers, swiveling upper roller, – Capacity 1550 x 9 mm – Electrically adjustable rear roller – Electrically adjustable lower roller (material clamping) – Digital display for rear roller movement – Digital display for lower roller movement (material clamping) – Hardened rollers – Conical rolling – Swing-out upper roller – Braking motor – Emergency stop Dsdpjy Rh H Tsfx Aa Neut – Documentation – 400V

Condition: excellent (used), functionality: fully functional, Gear Hobbing Machine WMW MODUL ZFWZ 500 x 5, conventional Country of origin: Germany Technical specifications Details Maximum workpiece diameter: 500 mm Gear width: 250 mm Max. module: 5 Min. module: 12 mm Total power requirement: 2.2 kW Weight of machine: approx. 1920 kg Machine dimensions: approx. 2500 x 1600 x 1900 mm Cutter diameter max.: 250 - 285 mm Clamping table diameter: 460 mm Table bore: 70 mm Accessories: various Control unit: conventional Additional information: documents Djdpjy Rh Hyofx Aa Nout

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Equipment: lighting, rotational speed infinitely variable, type plate available, From business liquidation: Gillardon GB 30 V Year of manufacture 1998 automatic feed 0.1/0.16/0.25 stepless speed adjustment from 60-1600 rpm speed indicator 2-speed motor work light quill stroke 170 mm throat depth 2900 mm table size 480x560 mm – clamping surface 350x440 mm MT 3 spindle – with Röhm keyless chuck 3-16 mm Dujdpfxjy Rh Hms Aa Njt Machine height 1980 mm – weight approx. 400 kg The machine runs very smoothly and precisely + machine vice

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Double roller carriage with carriage length of 3400 mm Cutting width at parallel fence 1000 mm, CNC-controlled Drive power 7.5 kW Vario Dusdpfoy Rh Haex Aa Not AKE tool clamping system Saw blade diameter max. 500 mm Control panel at eye level Template holder Cross-slide extension 2-axis scoring unit LED lighting for scorer (ELMO) "Rapido" scoring system Table extension 840 mm Angular mitre fence Duplex Vacuum clamping device on double roller carriage

Condition: used, Year of construction: 2004, functionality: fully functional, Wide belt sander CB ST 970 R+R – after comprehensive overhaul Specification: • Condition – used, after comprehensive overhaul, calibration, and replacement of conveyor belt with a new one • Manufacturer – CB • Model – ST 970 R+R • Working width – 970 mm • 2 sanding units: - 1 calibration roller with hard rubber – diameter 150 mm - 2 finish sanding roller with soft rubber – diameter 150 mm • Main motor power: 9.2 kW • 2 feed speeds for the conveyor • Electronic thickness gauge for the workpiece • Photocell-controlled oscillation • New conveyor • Emergency stop Duodpoy Rh E Aefx Aa Njt • Complete set of documentation from the manufacturer (in Italian) • Weight: 1,170 kg • Year of manufacture: 2004 • Overall dimensions: 130 x 160 x 195 cm (L x W x H) Additional information: • Machine is in very good technical condition, ready for immediate use • The pictures shown reflect the actual condition of the item for sale • Facility to connect and test the machine on site • Free machine operation training (at company headquarters) • The price in the listing does not include VAT or transport costs Financing and transport: • We organize transport via MDD fleet, courier companies, or third-party carriers • Financial support available through leasing or lease loans

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 1,686 h, load capacity: 2,500 kg, lifting height: 5,180 mm, free lift: 1,750 mm, load center: 600 mm, mast type: triplex, construction height: 2,382 mm, battery capacity: 560 Ah, battery voltage: 80 V, DGUV certified until: 05/2027, fork length: 1,200 mm, Equipment: CE marking, UVV, cabin, full service history, lighting, sideshift, Still RX 60-25 electric forklift with the following specifications: · Operating hours: 1,686 · Lifting capacity: 2,500 kg · Lift height: 5,180 mm · Overall height: 2,380 mm · Year of manufacture: 2017 STILL 2.5-ton electric forklift with enclosed full cabin and heater, very good battery, non-marking tyres, triplex mast with full free lift, sideshift, road-legal lighting in accordance with German StVZO, fork length 1,200 mm (other fork lengths available upon request), battery charger included. Including 1,000-hour service in accordance with STILL manufacturer guidelines and valid UVV safety inspection at the time of sale. Inspection, demonstration, and test drive available by prior appointment. Sale is strictly to business customers only. Subject to prior sale, errors and typographical mistakes excepted. This machine is also available for rental. Ask about our attractive spring rental offers! Duedpfxjy Rh Evj Aa Net We can deliver your new forklift cost-effectively with our own ramp-equipped low-loader (transport costs upon request). Find more information and offers on our website.

Condition: used, functionality: fully functional, BOTTENE Crosscut Saw – After Technical Inspection, Ready for Work Specification: • Condition: used, after comprehensive inspection Dodpfxsy Rh Epe Aa Nsut • Manufacturer: BOTTENE • Blade diameter: 330 mm • Saw motor: 1.5 kW • Max dimensions of cut element at right angle: 110 x 200 mm (height x width) • Table size: 70 x 55 cm • Fences adjustable at an angle • Pneumatic blade lifting/lowering – operated by foot pedal • Overall dimensions without tables: 90 x 80 x 105 cm (L x W x H) Additional information: • The machine is in good technical condition, ready for immediate use • The attached photos show the actual condition of the item for sale • Possibility to switch on and test the equipment on site • Price listed in the auction does not include VAT or transport costs Financing and transport: • We organize transport via the MDD fleet, courier companies, or external carriers • Financing support available in the form of leasing or lease-loan

Condition: like new (used), functionality: fully functional, Year of construction: 2021, operating hours: 9,856 h, load capacity: 5,000 kg, lifting height: 6,800 mm, free lift: 1,950 mm, load center: 500 mm, fuel type: diesel, mast type: triplex, construction height: 3,180 mm, DGUV certified until: 05/2027, fork length: 1,200 mm, Equipment: CE marking, UVV, air conditioning, cabin, full service history, lighting, seat heater, sideshift, Linde H 50 D Evo Diesel Forklift with the following specifications: Lifting capacity: 5,000 kg Lifting height: 6,800 mm Overall height: 3,180 mm Year of manufacture: 2021 Operating hours: 9,856 Fully equipped Linde 5.0-ton diesel forklift with full cab and heating, air conditioning, 4-cylinder engine, new front and rear tires (to be mounted), triplex mast with full free lift, mini levers, side shifter, 4th valve, two-pedal control, fork length 1,200 mm. Includes 1,000-hour service according to LINDE manufacturer's specifications (with new timing belt and water pump) and valid UVV safety inspection. Additional attachments such as fork positioners, rotators, etc., or alternative fork lengths available upon request. Viewing, demonstration, and test drive available by prior telephone appointment. Duodpsy Rh Ecefx Aa Nst Sale is made exclusively to commercial customers. Subject to prior sale, errors, and typographical mistakes. We can deliver your new forklift cost-effectively with our own ramp low-loader (transport costs on request). Further information and offers can be found on our website.

Condition: excellent (used), Year of construction: 1974, functionality: fully functional, Manufacturer: WMW GLAUCHAU Type: SIP 400x500 Year of manufacture: 1974 Total power requirement: 12 kW Control: conventional Machine weight: 5,900 kg Dimensions (L x W x H): 4000 x 1780 x 2400 mm Swing diameter: yes Internal diameter: 800 mm Grinding depth: up to approx. 500 mm Table stroke: 800 mm Distance from workpiece spindle head Grinding diameter in workpiece guard Adjustment of internal grinding attachment Delivery time: short notice Price: on request Type of machine: Internal and face grinding machine 1 unit internal cylindrical grinding machine with face grinding attachment SIP 400 x 500 Special version with enlarged swing diameter and extended hydraulic cross slide Reconstructed and modernized at the Glauchau manufacturer plant 1. TECHNICAL DATA 1.1 Working Range Internal grinding, min./max.: 30/630 (800) mm External grinding, max.: 800 mm Workpiece diameter, max.: 800 mm In workpiece guard, max.: 800 mm Without workpiece guard, approx.: 850 mm Duodpfoy Rh D Sex Aa Not Up to grinding spindle carrier, max.: 1225 mm On the table, max.: 545 mm 1.2 Workpiece Spindle Headstock Max. cross traverse: 650 mm Cross adjustment via geared motor and positioning device Swivel range, max.: 15° Workpiece spindle speeds (rpm): 16/22/32/45/63/90/125/180/250 Load capacity, max.: 1000 kg Spindle head (with bayonet flange) DIN 55021 size 11

Condition: used, functionality: fully functional, Crosscut Saw, Mitre Saw OMS FC 350 R 2.2 kW – after technical inspection Specification: • Technical condition: used, after inspection • Manufacturer: OMS • Model: FC 350 R • Blade diameter: 350 mm • Saw motor: 2.2 kW • Maximum dimensions of workpiece cut at right angle: 110 x 150 mm (height x width) • Blade guard for operator safety • Extraction port diameter: 60 mm • Cutting angle adjustment: +/- 45 degrees (machine does not maintain perfect extreme angles) • Overall dimensions without tables: 82 x 80 x 76 cm (length x width x height) Additional information: • The machine is in decent technical condition, ready for immediate use Dsdpfsy Rh D Esx Aa Nout • The presented photos show the actual condition of the item for sale • Possibility to power up and test the device on site • The price listed in the auction does not include VAT or transport costs Financing and Transport: • We organise transport with the MDD fleet, courier companies, or external carriers • Financial support available in the form of leasing or lease loan

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 8,455 h, load capacity: 3,000 kg, lifting height: 3,950 mm, free lift: 150 mm, fuel type: diesel, construction height: 2,700 mm, DGUV certified until: 05/2027, fork length: 1,200 mm, Equipment: CE marking, UVV, cabin, full service history, lighting, sideshift, Linde H 30 D-01 Diesel Forklift with the following specifications: Operating hours: 8,455 Lifting capacity: 3,000 kg Lifting height: 3,850 mm Overall height: 2,700 mm Year of manufacture: 2011 LINDE 3.0 ton diesel forklift with full cabin, good front tires - new rear tires, telescopic full free lift mast, side shifter, mini-levers, two-pedal control, front and rear lighting, fork length 1,200 mm Includes 1,000-hour service as per LINDE manufacturer’s requirements (with new timing belt and new water pump) and valid safety inspection (UVV). Dujdpfjy Rh Dxsx Aa Nst The following options are available for an extra charge: - Cosmetic reconditioning - Alternative fork length Inspection, demonstration, and test drive available by prior telephone appointment. Sale exclusively to businesses. Subject to prior sale, errors, and typographical mistakes. We can deliver your new forklift at low cost with our own low-loader (transport rates on request). Further information and other offers can be found on our website.

Condition: used, functionality: fully functional, OMGA TR2A Double Mitre Saw for Wood and Aluminium – After Technical Inspection, Ready for Operation Specification: • Technical condition – used, after comprehensive technical inspection • Manufacturer – OMGA • Model – TR2A • Main motors – 2 x 1.65 kW (3,000 rpm) • Pneumatic head control • Maximum cutting length – 312 cm • Minimum cutting length – 10 cm • Maximum cutting section – 80 x 145 mm (at right angles) • Maximum blade diameter – 300 mm Dsdpey Rh Drefx Aa Nsut • Angle cutting range from -45 to +45 degrees (right/left) • 3 operating modes • Vertical material clamps • Extraction ports – 80 mm diameter • Weight – approx. 500 kg • Overall dimensions – 4361 x 115 x 125 cm (L x W x H) Additional information: • The machine is in good technical condition, ready for immediate use • The photos shown represent the actual condition of the item for sale • It is possible to connect and test the machine on-site • The listed price does not include VAT or transport costs Financing and transport: • We arrange transport via our own MDD fleet, courier services, or external carriers • We offer financial support in the form of leasing or lease-loan options

Condition: good (used), A well-maintained Nicholson A6/35” is being offered. Dsdsy Rhymopfx Aa Neut

Year of construction: 2013, condition: reconditioned (used), Getinge tilting boiling kettle model M4. The unit has undergone a complete overhaul. Capacity 200 l, power 35 kW, 400V. We also offer kettles with capacities of 150, 200, and 300 l. Djdpfey Rhu Dsx Aa Nsut

Condition: good (used), functionality: fully functional, Year of construction: 1995, Folding machine with up to 2500 mm working length, maximum material thickness up to 1.5 mm. Dujdpfxjy Rhtyo Aa Nst

Condition: good (used), functionality: fully functional, Year of construction: 2007, Max. machining length: 3000 mm Max. material thickness for iron: 2 mm Dusdoy Rhtgepfx Aa Nst

Condition: new, power: 103 kW (140.04 HP), fuel type: diesel, gearing type: automatic, color: white, number of seats: 9, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, Fiat Ducato Opel Movano Multiple vehicles in stock - L3 H2 - Length: 5,998 mm - Manual transmission, automatic optional - System floor with 6 airline rails - 7 sleeper seats (swivel, adjustable backwards, with left and right armrests, magazine net, and Isofix), individually configurable or easily removable in the passenger compartment - ABS paneling in the passenger compartment (no sheet metal visible) - Blue/white ambient lighting in the passenger compartment Duodpfoy Rhrpex Aa Not Available with grey synthetic leather seats as shown in the second-to-last photo or with red fabric seats. Optional: Entry step, wheelchair ramp, or lift. Special equipment: Reinforced battery, heated rear window, full-size spare wheel (incl. spare wheel holder), co-driver’s seat height-adjustable, tinted glazing, Visibility-Plus Package Additional features: Passenger airbag, driver airbag, trailer stability program, traction control (ASR), electrically adjustable and heated exterior mirrors, extended exterior mirrors for 2,200 mm vehicle width, Black Box (Event Data Recorder, EDR), brake assist, roof antenna, Eco Package, electronic park assist, driver assistance system: adaptive load control (LAC), hill start assist, intelligent speed assistant, driver drowsiness warning, autonomous emergency braking, post-collision system, crosswind assist, lane keeping assist with traffic sign recognition, rollover protection, fixed windows 3rd row in cargo/passenger area, cruise control including speed limiter, 8-speed automatic transmission, cooled glove compartment, rear wing doors with glazing, infotainment system with 5" color display, DAB and Bluetooth interface, body type: high-roof panel van standard, fuel tank: 90 liters, black radiator grille, partition wall to cargo area, model update (2), engine: 2.2 L 103 kW turbo diesel Multijet, wheelbase: 4,035 mm, tire repair kit, tire pressure monitoring system, rear acoustic parking warning (external warning signal), low emission according to Euro 6e, halogen headlights, right-side sliding door with window, upholstery: fabric, driver’s seat with armrest and lumbar support, engine start/stop system, rear view camera, UConnect telematics box, GVWR 3.5 t Net export possible. 2 x Fiat, 2 x Opel available immediately. Additional vehicles available at short notice as automatics and manuals. Also as Opel Movano (identical model), partly with different equipment packages. 1 x Tenorite Grey in stock. All vehicles also available as demonstrators starting from €29,990.00 net. Net export possible. We make worldwide shipments.

Condition: new, power: 125 kW (169.95 HP), fuel type: diesel, gearing type: automatic, color: white, number of seats: 16, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, Sprinter 515/517 Front Low-Floor Entry M2 Permissible Gross Weight 5,000 kg / Capacity 19 passengers Optionally available as M3 with up to 6,400 kg / up to 30 passengers Interior conversion as follows: - Fare collection counter instead of co-driver seat - Double-width electric passenger door with 1,250 mm opening width - Manual wheelchair ramp - 13 city bus seats / sleeper seats optional (can be fixed upon request) - Wheelchair/pram space - 6 standing places (including 3 folding seats) additionally --> Total capacity 19 plus driver (additional standing spaces available on request) - Passenger compartment air conditioning (Webasto 12 kW) plus MB front A/C 7 kW at driver’s area - Convectors heating in passenger compartment (up to behind the last seat row), thermostatically controlled - Length 7,367 mm with original rear twin doors --> longer versions up to 7,500 mm or more available upon request Dodpfxjy Rhris Aa Nout - Double glazing, VIP black, in original cut-outs (optional panoramic glazing available) - Optional extra-large windscreen with electric sun blind and route display preparation - Eligible for funding in most federal states (contact us for details) - Complies with §30d paragraph 4 of the StVZO Base vehicle, e.g., equipped as follows: In standard MB specification with 150 HP (optional 170 HP), incl. comfort driver’s seat (optional air-suspended seat), optional auxiliary heater, front A/C, MB radio, cruise control, 9-speed automatic, optional park package, ... GSR 3 systems included as standard: - Reversing camera - Blind spot assist - Turn assist - MBUX 10-inch (radio with Bluetooth, CarPlay, touchscreen) - Tire pressure sensors - Attention assist - Active lane keeping assist - Starting information assistant - Intelligent speed assist - Distance assist - Rain sensor - Electric exterior mirrors This is a sample vehicle. This model is not in stock. Delivery time is approximately 4 months. Base price without destination displays in above-mentioned configuration from €104,990.00. Net export possible.