Sz Sägemaschinen-Zentrum Gesellschaft mbH

Condition: used, Year of construction: 1996, X-axis: 500mm, Y-axis: 380mm, Z-axis: 380mm, B-axis: 180°, C-axis: 360°, max. spindle speed: 15,000rpm, feed and rapid traverse: 30m/min, tool changer: 24-position, tool holder: SK40, control: Deckel Maho MillPlus, spindle operating hours: 7,000h, the original screen is defective, therefore a separate monitor is used, replacement spindle has 7,000h, spindle module and E/R module replaced in 2023, C-axis table bearing repaired in 2023, Z-axis guideways repaired in 2024, hard drive replaced in 2024, without clamping systems or tools, an on-site inspection is possible. Nsdpoz Ea Rnsfx Ab Uolg

Condition: used, Year of construction: 2001, X-axis: 650mm, Y-axis: 500mm, Z-axis: 500mm, feed and rapid traverse: 60m/min, tool changer: 30-position, control: Heidenhain 430, length: 3400mm, width: 4300mm, height: 3100mm, weight: approx. 10t, spindle operating hours: 3,600h, with documentation, without clamping systems or tools, original tool changer no longer available, an on-site inspection is possible. Nljdpez Ea Rhofx Ab Usg

Condition: used, Year of construction: 2005, X-axis: 750mm, Y-axis: 600mm, Z-axis: 520mm, B-axis: 180°, C-axis: 360°, max. table load: 350kg, tool changer: 32-position, max. spindle speed: 18,000rpm, rapid traverse: 50m/min, max. feed rate: 20,000mm/min, tool holder: SK40, control: Heidenhain Mill Plus iT, spindle operating hours: 6,000h, with through-spindle coolant, chip conveyor, replacement spindle has 6,000h, X- and Y-axis guideways repaired in 2024, X-axis measuring system replaced in 2025, rotary union replaced in 2025, both chain changer motors replaced in 2025, an on-site inspection is possible. Njdpfx Aez Ea Rusb Uelg

Condition: used, A CNC machining center is offered. Control: Heidenhain TNC 426, spindle motor power: 13kW, full-load current: 30A, internal coolant supply: 10bar, spindle hours: 21704h, machine power-on hours: 51118h, control power-on hours: 25924h, program run time: 20017h. Equipped with internal coolant supply 10bar, 4th and 5th axes and machine vises. Weight: approx. 4300kg. An on-site inspection is possible. Nodpfxjz Dkilo Ab Uolg

Condition: used, Year of construction: 2007, A vertical CNC machining center in need of repair is offered for sale. Main motor: 15kW (S1), max. current: 36A, phases: 3, control: Heidenhain. Weight: approx. 7000kg. The main spindle has bearing damage, and the control requires overhaul. An inspection is possible by prior arrangement. Nljdpfx Abjz Da Rxo Usg

Condition: used, Year of construction: 1986, A vertical CNC machining center is offered. X/Y/Z-axis travels: 560mm/410mm/381mm, spindle speed: 60-6000rpm, drive power: 3.7/5.5kW, table size: 410mm × 900mm, max. table load: 300kg, tool shank: ISO 40 (MAS-BT40), rapid traverse X/Y/Z: 24/24/18m/min, control: Mazatrol CAM M-2. Equipped with original parameter lists. Weight: approx. 4200kg, overall dimensions X/Y/Z: approx. 2300mm/2000mm/2641mm. The program is missing because the machine has been disconnected from power for several years. Documentation available. Inspection possible by appointment. Nlodpfx Ajz Atzdob Uog

Condition: used, Year of construction: 1999, Travel X/Y/Z: 2000mm/600mm/800mm, rapid traverse: 30m/min, feed rate: 30m/min, max. spindle speed: 9000rpm, tool holder: SK40, tool positions: 48, clamping plate: 650×2500mm, control: Bosch Type 3 OSA. Documentation available. An on-site inspection is possible. Nljdpfx Aszz Irhob Usg

Condition: used, Year of construction: 1996, A Mikron CNC universal machining center in need of repair is offered. Operating voltage: 400V, frequency: 50Hz, rated current: 40A, control voltage: 24V DC, control: Heidenhain TNC 426, weight: approx. 5800kg. The tool changer is defective and the hydraulic accumulator is empty or defective. The machine has been used in production in single-shift operation with these limitations in recent years. The tools were changed manually, otherwise the machine can be operated. An on-site inspection is possible. Nlsdjzzqccepfx Ab Usg

Condition: used, Year of construction: 2007, Controls: EIP, voltage: 230V, connected load: 3kVA, with CE marking. An on-site inspection is possible. Nlsdezzqb Sspfx Ab Uog

Condition: used, Year of construction: 2008, Number of axes: 3, control: FANUC, connected load: 10kVA, weight: 3.7t, an on-site inspection is possible. Nodjzzqb Eepfx Ab Uelg

Condition: used, Year of construction: 2008, Two Willemin-Macodel W 408 and four Willemin-Macodel W 408S are available, year of manufacture W 408: 1997, 2002, year of manufacture W 408S: 2005, 2006, 2007, 2008, an on-site inspection is possible. Nledezzqbrjpfx Ab Uog

Condition: used, Year of construction: 2007, X-axis: 500mm, connected load: 30.8kVA, length: 1624mm, width: 1560mm, height: 2829mm, weight: 2.4t, operating hours: 8,840h, power-on time: 89,352h, total operating hours: 28,840h, an on-site inspection is possible. Nljdpfszytcpjx Ab Ujg

Condition: used, Year of construction: 1999, Travel X/Y/Z: 610mm/406mm/508mm, max. spindle speed: 8000rpm, spindle power: approx. 7.5kW, rapid traverse X/Y: 24m/min, rapid traverse Z: 15m/min, spindle taper: SK40, tool capacity: 24, table dimensions X/Y: 750mm/400mm, max. table load: approx. 350kg, control: Hurco Ultimax 4 Dual Screen. Weight: approx. 4000kg. An on-site inspection is possible. Nlsdpezwfrqsfx Ab Ujg

Condition: used, DMG HSC 55 linear is a 5-axis machining center with high precision, superior accuracy and reliability. Travels X450 mm, Y650 mm, Z460 mm; A -10/+110°; tool magazine 120 places; tool Ø 80 mm; tool length 250 mm; max tool weight 6 kg; spindle taper HSK63. Spindle 2–28000 t/min, spindle power 38/28 kW; 50Hz 3x400 V; total installed power 70 kVA; machine weight ≈9500 kg; overall dims L3210×W2930×H2900 mm. Delivers tight tolerances; typical for automotive, aerospace, medical, watchmaking and machine-tool manufacture. Nledpjzv Nh Tofx Ab Ujg

Condition: used, Year of construction: 2010, A KERN 5-axis CNC machining center with EROWA Robot Compact is offered. Travel X/Y/Z: 500mm/500mm/400mm, simultaneous 5-axis machining, hydrostatic guideways in the X and Y axes, swivel range: -10° to +110°, feed rate X/Y/Z: 30m/min, max. acceleration: 10m/s², max. spindle speed: 40000rpm, spindle power: 37kW, max. torque: 12000rpm, tool taper: HSK-E40, tool magazine: 50, tool change time: approx. 3s, control: Heidenhain iTNC 530 , laser tool measurement, workpiece touch probe, EROWA PowerChuck P, EROWA Robot Compact year of manufacture 2013 with 70 magazine positions, including 55 positions ITS 72 and 15 positions ITS 148, max. transfer weight pallet incl. workpiece: 30kg, automatic loading and unloading of the magazine also possible during machining, machining medium: oil, belt filter system and max. high-pressure supply 80bar, oil mist extraction system and fire extinguishing system available, machine power-on hours: approx. 86589h, spindle operating hours: approx. 66997h. The machine is available from November 2026. Documentation available. Inspection possible by arrangement. Nedpozu Szmofx Ab Uelg

Condition: used, T-slot system: 18 H8, working spindle: SK40, length: 5000mm, width: 3240mm, height: 3800mm, basic machine weight: 17.5t, machine-on operating hours: 31,546h, control-on operating hours: 56,903h, program run time: 10,521h, with documentation. An on-site inspection is possible. Nljdpfezun U Njx Ab Ueg

Condition: ready for operation (used), Year of construction: 2012, operating hours: 15,500 h, functionality: fully functional, machine/vehicle number: 30017349, Equipment: chip conveyor, For sale is a well-maintained Hedelius RS605 K20 5-axis machining center from the proven RotaSwing series, manufactured in 2011 and first put into operation in 2012. The machine combines a fixed machine table with an integrated rotary-tilting table and thus enables the economical complete machining of workpieces in just two setups. It is equipped with a CNC control system Heidenhain iTNC 530, chip conveyor, 3D measuring probe, coolant system, and additional Brankamp collision monitoring system for the protection of the machine and tools. The machine is currently still in productive use and can be made available on short notice. Technically and visually in good to very good condition, regularly maintained. Inspection and test run possible at the West Saxony location by appointment. Various clamping devices, tools, and CAD programs can be purchased ADDITIONALLY (vacuum plate, magnetic clamping table, etc. - see pictures). Nledpfx Aezukx Rsb Usg Other machines from site closure are also available. Takeover of the location negotiable.

Condition: ready for operation (used), Year of construction: 1996, Travel X/Y/Z: 740mm/500mm/480mm, tool holder: SK40, tool positions: 22, max. spindle speed: 4700rpm, control: Heidenhain TNC 426 PA. Machine dimensions: approx. 3000mm/2400mm/2700mm, weight: approx. 5000kg. The machine was used exclusively for machining plastic and operated without metalworking fluid. The coolant system must be repaired. The backup battery of the control is depleted and must be replaced. Inspection possible by arrangement. Njdpfx Aozukt Uob Uelg

Condition: ready for operation (used), Year of construction: 2010, X-axis: 635mm, y-axis: 510mm, z-axis: 460mm, clamping surface dimensions: 790x560mm, max. spindle speed: 8000rpm, control: Heidenhain TNC 620, connected load: 17kVA, spindle motor drive power: 8.4kW at 100% duty cycle, length: 3290mm, width: 2920mm, height: 2650mm, weight: 3.8t, operating hours: 27,125h, spindle hours: 8668h. Equipment: SK 40 DIN69871 tool holder, 20-position tool changer, coolant system 3.7bar, DMG TS 649 electronic touch probe, Heidenhain TT140 tool measurement system, Lehmann FA-510L-485 A-axis indexing unit s/n A756, four-jaw chuck, Vischer & Bolli zero-point clamping system, chip conveyor, chip cart, workbench with hand tools, milling and drilling tools, platform trolley for the indexing unit, tools and accessories, various tool holders approx. 36 pieces, various accessories, spare parts and documentation. An on-site inspection is possible. Nlsdpfx Aozrn Iwjb Ueg

Condition: ready for operation (used), Year of construction: 2003, A Deckel Maho 5-axis CNC universal machining center is offered, including an Interlit compact filtration system for the coolant supply. 1) Deckel Maho DMU 70 eV 5-axis CNC universal machining center, year of manufacture: 2003, X/Y/Z travels: 750mm/600mm/520mm, B-axis: approx. 180°, C-axis: 360°, rapid traverse X/Y/Z: 50m/min, feed rate: approx. 20m/min, max. spindle speed: approx. 18000rpm, spindle power: approx. 25kW, max. rated power: approx. 35kW, spindle torque: approx. 87Nm, tool holder: SK40, table dimensions X/Y: approx. 700mm/500mm, max. table load: approx. 200kg, tool magazine: 32, weight: approx. 8500kg. 2) Interlit SUK 200-900 compact filtration system, year of manufacture: 2003, filter area: 0.2m², filling volume: 900l. Inspection by prior arrangement is possible. Nedpszrn Iqofx Ab Uolg

Condition: ready for operation (used), Year of construction: 2016, A Burkhardt + Weber heavy-duty CNC large-format machining center is available. Axis travel X/Y/Z: 1600mm/1250mm/1250mm, tool interface: SK50, pallet dimensions X/Y: 800mm/1000mm, 125mm tool pockets: 95, 225mm tool pockets: 7, 350mm tool pockets: 5, 420mm beam tool pockets: 5, coolant system capacity: 1900l, control: Siemens 840D with ShopMill, operating hours: approx. 20000h. Including coolant system with paper band filter, machine enclosure, through-spindle coolant, external coolant nozzles, chip conveyor, dual-gripper tool changer and HV-NC swivel head. Documentation available. An on-site inspection is possible. Njdpfezp Rgqex Ab Ujlg

Condition: ready for operation (used), Year of construction: 2000, Travel X/Y/Z: 560mm/410mm/460mm, Tool positions: 30, Tool interface: CAT40/BT40, Spindle speed: 8000rpm, Spindle power: 10HP, Spindle diameter: 70mm, Rapid traverse: 30m/min, Table dimensions X/Y: 605mm/380mm, Max. table load: 250kg, Number of pallets: 2. Machine dimensions X/Y: approx. 3050mm/2900mm, Weight: approx. 5000kg, Control: Fanuc. Documentation available. An on-site inspection is possible. Nljdpfsznmx Hsx Ab Ueg

Condition: ready for operation (used), A Deckel Maho CNC vertical machining center is available. Travel X/Y/Z: 1000mm/600mm/600mm, table dimensions X/Y: 1200mm/600mm, max. table load: 800kg, spindle speed: 8000rpm, power: 13kW/9kW, torque: 57Nm/83Nm, feed rate: 30m/min, rapid traverse: 30m/min, tool stations: 24, tool holder: SK40. Machine dimensions X/Y/Z: approx. 3200mm/2600mm/2700mm, weight: approx. 6500kg. Documentation available. An on-site inspection is possible. Njdpozmym Iofx Ab Uslg

Condition: ready for operation (used), Year of construction: 2009, A Hurco CNC vertical machining center is available. Tool holder: SK50, travel X/Y/Z: 1270mm/660mm/610mm, max. table load: 1500kg, spindle speed: 8000rpm, tool stations: 30, rapid traverse: 30m/min. Machine dimensions X/Y/Z: approx. 4600mm/4600mm/3000mm, weight: approx. 9250kg. Documentation available. An on-site inspection is possible. Nedpfezmh Tiex Ab Ujlg

Condition: ready for operation (used), Year of construction: 2008, A Toyoda CNC horizontal machining center is available. X/Y/Z travel: 750mm/800mm/850mm, table dimensions X/Y: 550mm/550mm, spindle speed: 15000rpm, tool interface: SK40, tool magazine capacity: 60, weight: approx. 16000kg, power-on hours: 133870h, operating hours: 25394h, feed hours: 12802h. Including chip conveyor, 4th and 5th axis, and Knoll KF 400/2250. Documentation available. An on-site inspection is possible. Nsdpfx Aozlt Rdeb Uslg