Used Roll benders (motor-driven) for 3 - 6mm sheet thickness for sale (156)

Condition: new, sheet thickness: 3bending length: 1250upper roll diameter: 90sheet length: 1250 Technical specifications: - Cast iron body - By manuel or motorised (optional) bending - Opening top roll to side after bending for taking out the material easily - Cone bending device - Movement of the back and bottom rolls up and down manually with hand wheel - Portable control panel in order to control material from required  locations with foot pedal  - In acccordance with CE norms. Working Length: 1250 mm Maximum Thickness:Pre-bending: 2.5 mm Bending: 3.0 mm Yield Point: 240 N/mm² Number of Rolls: 3 Top Roll Diameter: 90 mm Minimum Bending Diameter: 130 mm Motor Power: 1.1 kW Machine Length: 1950 mm Height: 1130 mm Width: 900 mm Weight: 500 kg Options: Cjlnod Ab Tzj Hub Tegt - Back roll with motor EURO 825,-- - Digital readout for displaying position of the backroll EURO 1.010,-- - Body cover EURO 314,-- - Hardened rolls EURO 550,-- We have many references!

Condition: new, Sheet width 1250 mm sheet thickness 5,5 mm bending 5,0 mm roll length 1280 mm smallest diameter 210 mm roll diameter - top 140 mm weight 1365 kg dimension L-W-H 2.020 x 900 x 1.200 mm Standard equipment: - Central rolls driven by electric motor, rotary reduction gear and gear drive - Top roller can be swung out to the side - Main motor with braking device - Conical bending device - Mobile control panel and foot pedal - CE mark/declaration of conformity Coln Hubehcw Rxe Tjgt Special equipment: - motorized rear roller adjustment - digital display for rear roller - induction hardened rollers

Condition: good (used), Hydraulic round bending machine Cgjln Huevg E Ineb Tjt - Bending capacity: 5.5 mm Good condition, fully functional, can be inspected and tested on site. Shipping also abroad. Inspection: Basically, I would like to point out that the item can be inspected and tested under power before purchase in order to avoid misunderstandings. Please ask questions before buying to avoid any ambiguities. For general questions or to make an appointment for a viewing, I can be contacted at any time on the telephone number below or above. Errors in the description and prior sale reserved. VAT is shown separately on my invoices. Shipping with forwarding agent.

Condition: new, sheet thickness steel (max.): 3 mm, roller diameter: 95 mm, bending length: 1,070 mm, - Capacity 1070 x 3 mm - Conical rollers Csln Hubewhgm Te Tjgt - Pivoting top roller - Foot pedal control - Brake motor - Emergency stop - Documentation - 400V

Condition: new, Year of construction: 2023, sheet width 1540 mm plate thickness 4 mm upper roll diameter 110 mm diameter of lower rolls 110 mm bending roll diameter 110 mm total power requirement 1,1 kW weight of the machine ca. 0,9 t dimensions of the machine ca. 2,5x0,6x1,1 m New machine Cgeln Hevx Uvxoub Tjt Cone bending equipment, hardened and ground rollers, motorized bending roller stationary control panel, digital display bending roller right and left, digital display bottom roller

Condition: good (used), Three-roller round bending machine, three-roller sheet metal bending machine, bending machine, sheet metal rolling machine, 3-roller round bending machine, profile bending machine, three-roller sheet metal rolling machine, motorized round bending machine -Roll bending machine: hand-operated 3-roll roll bending machine -Max. sheet width: 1270 mm -Max. sheet thickness: 2.5 mm -Roller diameter: 90 mm Celnswcrk Hj Hub Tsgt -Dimensions: 1960/610/H1050 mm -Weight: 524 kg

Condition: ready for operation (used), Year of construction: 1985, Functionality: fully functional, machine/vehicle number: 3ROLL 4000 X 6 MM, sheet thickness steel (max.): 6 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness copper (max.): 6 mm, roller diameter: 310 mm, overall weight: 11,000 kg, total length: 5,700 mm, total height: 1,700 mm, total width: 1,500 mm, roller (bottom) diameter: 300 mm, bending length: 4,000 mm, type of input current: three-phase, working length: 4,000 mm, roller length: 4,050 mm, Equipment: documentation/manual, emergency stop, 3 ROLL PLATE BENDING MACHINE WITH PREPINCHING capacity plate roll 4000 x 6 mm Plate width 4000 mm Thickness plate rolling 6 mm Cgeln Hjvn I Hcsub Tst Pyramid 3 rolls with pre-pinch cylindrical plate rolling Conical plate rolling Rollers surface length 4050 mm Top roll 310 mm Side rolls 300 mm Datasheet power rollers rotation 15 Hp -3 rolls driven rotation with gear unit power bending- prebend side lower rollers 7,5+7,5 Hp Cene bending attachment rollers tiltable for plate conical forming - hardened contrast pad roller type Hydraulic open front drop-end , top-roll tilt-up wide opening for unloading Console electric on wheels, electric push buttons commands remote Digital readouts rollers position repetability safety and emergency installiton machine in working condition dimension 5700 x1500 x H1700 mm weight 11 Ton

Condition: used, 3-Roll Roll Bending Machine Sheet length: 1250 mm Cjln Hewbvl Esub Tegt Sheet thickness: approx. 6 mm Top roll diameter: 170 mm Bottom roll diameter: 140 mm Roll speed: 6.5 rpm Rolling speed: approx. 2.8 meters min. Roll drive motor power: 3 kW Top roll adjustment motor power: 0.75 kW Power supply: 380 volts, 50 Hz. - 2 bottom rolls driven - Symmetrical roll arrangement - Motorized top roll adjustment - Forward and reverse rotation via electric foot switch - Swing-out folding bearing and spindle support to relieve the load on the top roll - Housing bearing of the rear roll broken, poorly repaired (see pictures) Space requirement: L x W x H: 2700 x 1100 x 1400 mm Weight: 1.8 tons.

Condition: new, sheet width 700 mm plate thickness 4,0 mm distance between columns 720 mm diameter of upper rolls 95 mm total power requirement 1,1 KW weight of the machine ca. 0,37 t Coln Huewfyqyob Tjgt dimensions of the machine ca. 0,95 x 0,76 x 1,25 mm

Condition: new, Year of construction: 2022, - Capacity 1070 x 3 mm - Electrically adjustable rear roller - Digital display - Hardened rollers - Tapered rollers - Brake motor Celn Husgg Rbpeb Tegt - Foot switch - Emergency stop - Documentation - 400V

Condition: excellent (used), Year of construction: 1998, Synchronized hydraulic calender with 4 rollers FACCIN Mod. 4HEL 1550 x 5 mm with total invitation. Year of construction 1998 "CE". Useful calendering length: 1500 mm. Calendering thickness: 5 mm. Invitable thickness: 3-4 mm. Diameter of upper and lower rollers: 135/150 mm. Cgsln Hsv Szzboub Tjt Diameter of side rollers: 135/150 mm. Power: 5.5 kW Dimensions: 2750 x 1170 x 1130 mm. Weight: 2800 kg Hydraulic release for ferrule exit. Conical device. CNC for automatic use. Use and maintenance manual. Good used, working in excellent condition. Video of operation attached.

Condition: used, Year of construction: 1999, sheet width 1550 mm plate thickness 4.5 mm pre-bending 4.0 mm roll length 1550 mm Celnev Uq Ivo Hub Tsgt min. dia. 190 mm bending speed ca. 5.3 m/min roll diameter 130 mm engine output 2.2 kW weight 1360 kg range L-W-H 2500 x 950 x 1110 mm Features: - Robust electromechanical roll bending machine - 2x central rollers driven by electric motor (top & bottom roller) - Top roller manually adjustable, with safety bearing - Bottom roller manually adjustable via handwheel - Side roller manually adjustable via handwheel * Including analog position indicator - Asymmetrical roller arrangement - 1x freely movable foot control

Year of construction: 2023, Condition: as good as new (ex-display), plate roll 1500 x 6 mm • Hydraulic 4 roll plate bending machine with prebend • Model MG • Plate width up to 1500 mm • Capacity thickness 6 mm • Pre-bend 4 mm • Fully hydraulic operated dual initial pre-pinch • Linear guideways technology best prebend Csln Hjizi Edjub Tjgt • Top roll 130 mm - lower roll 120 mm • Centralized hydraulic power unit 4 hp • Hardened rolls highest resistance surface • Conical plate bending with rolls tilt and contrast roller. • Drop end open hydraulic - unloading closed shells. • Mobile control console electric operated with digital readout • Programmable digital controller save & repeat automatic NC • 300 programs memory storage – industry 4.0 network connect • Safety installation and emergency stop • Manuals of service and schematics

Condition: new, bending length: 1250sheet thickness: 4.5upper roll diameter: 120 Technical specifications: - Back roll with motor - Cone bending device - Hardened and polished rolls - Body is made of St 52 steel - Main motor with brake system - Top and bottom rolls are driven bybrake electric motor, gears and gearbox system - Portable control panel  - Cast iron body - Movement of the back and lower rolls up and down manually - In acccordance with CE norms Options: - Back roll powered by electric motor EURO 1.166,-- - Digital readout for displaying position of the backroll EURO 1.010,-- - Hardened rolls EURO 823,-- - Special voltage EURO 480,-- Cgeljd Ab Nzsn Hub Tst - Material feeding table - Lower roll is powered by electric motor We have many references!

Condition: new, KRM is a series of heavier medium capacity round bending machines for workpieces up to 2000 mm (78.74 in.) in length. The machines have a solid, closed machine frame and you can adjust the rear roller manually by hand or optionally with a motor. With special features such as conical bending and pre-bending, the models in this series are suitable for a wide range of applications in individual production. Cgjln Huju Hf Rgjb Tst

Condition: new, - Capacity 700 x 4 mm - Conical rollers - Removable top roller - Brake motor - Foot control Celn Hubjh Rayts Tjgt - Emergency stop - Documentation - 400V

Year of construction: 2024, Condition: new, MRB-S Series Technical data (see pictures) Standard equipment CE Conical bend Motorized back roller Additional control panel for upper and lower rollers which are operated with landing gear. SAE 1050 steel rollers Induction hardened rollers, Relaxed steel construction, at 2.5 and 3m Machine supports, brake system for precise bends, Digital display. Motorized back roller with puller Optional equipment Motorised under-roller mounting, ground rollers Extended rolls for profile bends, Special rollers for profile bending, Special packaging for international deliveries. MRB series: Technical data (see pictures) Standard equipment CE standard Digital display Conical bend Motorized back roller with tightening Additional control panel for upper and lower rollers, which are operated with landing gear. operated by landing gear. SAE 1050 steel rollers, Induction hardened rollers, Relaxed steel construction, Braking system for precise bends. Optional equipment Motorized bottom roller with suit, stone rollers Extended rolls for profile bends, special rollers for profile bending, Special packaging for international Programmes Everything is configurable on demand, very short production & delivery time. Cgjln Hubsfin E Dj Tst We will be happy to provide you with further information on request. Durma Maschinen GmbH is part of the internationally successful Durmazlar Group, which exports new, high-quality sheet metal working machines all over the world and is headquartered in Türk

Condition: used, sheet width 1020 mm plate thickness 3.3 mm Sheet thickness / Pre-Bending 3.0 mm roll length 1040 mm Cgsln Hubsv T Npie Tjt speed ca. 4.0 m/min roll diam. toproll 110 mm roll diam. bottom roll 110 mm Roller diameter / side roller 110 mm Adjustment range of the side roller ca. 85.0 mm work height max. ca. 835 mm total power requirement 2.0 kW weight 525 kg range L-W-H 1925 x 985 x 1450 mm from a maintenance workshop Equipment: - Robust electric-driven roll bending machine for single and series production - Manually adjustable side roller (2 hand cranks) - Manually adjustable lower roller (eccentric hand lever) - Asymmetrical roller arrangement - Manually swiveling upper roller - Rollers with profile inlets - Safety enclosures

Condition: excellent (used), Year of construction: 2001, Functionality: fully functional, machine/vehicle number: 2050 x 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness copper (max.): 6 mm, sheet thickness brass (max.): 6 mm, sheet thickness (max.): 6 mm, roller (top) diameter: 170 mm, roller diameter: 170 mm, overall weight: 1,600 kg, total length: 3,000 mm, total height: 1,000 mm, total width: 1,000 mm, roller (bottom) diameter: 160 mm, bending length: 2,000 mm, type of input current: three-phase, working length: 2,000 mm, roller length: 2,050 mm, sheet width: 2,000 mm, working width: 2,000 mm, side roll diameter: 150 mm, working height: 800 mm, Equipment: documentation/manual, emergency stop, PLATE ROLL 2000x6 mm INITIAL PINCH Coln Hubjv Nq S Re Togt Rolls length 2050 mm -Top roll 170 mm -Side rolls 150 mm -Power electric 5,5 Hp Capacity -plate width 2000 mm -plate thickness 6 mm with prepinch Configuration on the machine -Rollers surface hardened high strength -Central rolls driven electric rotation on gearunit -side roll electric run with prepinch Pinch roll position with handwheel Front open manual drop-end -Readout gauge of side bending roll -Footpedal electric rollers rotation back/forth -Joystick electric control of side roll -Safety installations with emergency stop. -Machine in perfect conditions

Condition: new, KRM is a series of heavier medium capacity round bending machines for workpieces up to 2000 mm (78.74 in.) in length. The machines have a solid, closed machine frame and you can adjust the rear roller manually by hand or optionally with a motor. With special features such as conical bending and pre-bending, the models in this series are suitable for a wide range of applications in individual production. Cjln Husu E S Ensb Tsgt

Condition: new, - Capacity 1570 x 4.5 mm - Electrically adjustable rear roller - Electrically adjustable bottom roller (material clamping) - Digital display for the movement of the rear roller Cjljgg Nv Ijn Hub Tegt - Digital display for bottom roller movement (material clamping) - Hardened rollers - Conical roller - Brake motor - Emergency stop - Documentation - 400V

Year of construction: 2024, Condition: new, Bending capacity: 6 mm Bending: 5 mm Bending capacity: 6 mm Bending: 5 mm Bending length: 2,030 mm roller diameter: 170 mm Engine power: 4 kW Length: 3.600 mm Width: 1,020 mm Height: 1.120 mm Weight: 2.400 kg The machine can be viewed and demonstrated at any time by appointment in our demonstration centre in Staufenberg. Further machines are ready for demonstration at our premises in Staufenberg. Coln Hubeftdh Ie Tegt We will be happy to provide you with further information on request.

Condition: as good as new (ex-display), KRM is a series of heavy-duty, medium-capacity round bending machines for workpieces with a length of 1000 mm. The machine has a solid, closed machine frame. The rear roller is motorised. With special attributes such as cone bending and bevelling, this model is suitable for a wide range of applications in one-off production Cgelnsq I Nd Do Hub Tet

Condition: new, The models in our KRM ST series take on bending work on workpieces up to 3000 mm (118 in.) in length. The heavy, medium-capacity round bending machines have a solid, closed machine frame and a motor-driven rear roller. Conical bending and pre-bending are among the features that allow you a wide range of applications for individual production in metalworking, steel and metal construction. Csln Huoqagtijb Tsgt

Condition: new, The models in our KRM ST series take on bending work on workpieces up to 3000 mm (118 in.) in length. The heavy, medium-capacity round bending machines have a solid, closed machine frame and a motor-driven rear roller. Conical bending and pre-bending are among the features that allow you a wide range of applications for individual production in metalworking, steel and metal construction. Cgeln Hubeihvtgo Tot