PC controlled tool output

ACHTERBERG ATMS 3.0

Condition: as good as new (ex-display), Year of construction: 2025, Max Ø 114mm; Straight and bent round tubes; One grinding station; Grinding of straight and bent round tubes up to Ø114mm with maximum flexibility. The ML100 tube grinding machine is the perfect choice for surface grinding and polishing of round, oval and elliptical tubes. The ML planetary belt system allows belt grinding without rotating the tube to deliver the best results. The feed system safely feeds the straight tubes into the grinding station for a consistent and productive surface finish. ML100 Working capacity (Ø mm) 3 - 114 No. of stations 1 Sanding belt, dimensions (mm) (2x) 50x940 Sanding belt speed (m/s) 3-22 Feed speed (m/s) 1-5 Sanding belts Motor (kW) 3 Wheel, motor (kW) 1.5 Ndsdpfetzkgbsx Ab Usb Feed motor (kW) (2x) 0.12 Total power (kW) 5 Power consumption (A) 11 Dust extraction connection (Ø mm) 80 Dimensions (mm) 750x1000x1300 Weight (kg) 250

Condition: used, Field of view on the objective lens at 50x: 11.2 x 9.2 mm Field of view on the objective lens at 100x: 5.6 x 4.6 mm Projection area: 560 x 460 mm Ndjdpfx Aob Nxl Isb Usb Objective table size: 230 x 165 mm Diameter of the glass table: 80 mm Approximate weight: 230 kg Space requirement: 1030 x 780 x 1800 mm

Year of construction: 2025, condition: new, lxbxh 7500x2550x3000mm stainless steel frame with aluminium bottom and aluminium outside walls and roof this container is made for changing systems on trucks Ndodpfx Abjcltl Ej Uob with hydraulic feet, to lower down the platform to the ground - Central control panel (for belt press and washing elevator): it is fixed that it is not on the belt press. It is either in the center of the container or on the washing elevator. - Canvas cover: Additional hanging cover side doors: on the heater side in two parts - Water supply: Connection and system in 1" - Hydraulic system: Operation with 24V DC and 400V power supply; 24V DC magnetic valves

Condition: excellent (used), Year of construction: 1995, upon request Ndedpjfxgmgjfx Ab Usb

Condition: used, Year of construction: 2012, Technical details: Number of drawer: 48 Shelf width: 160 shelf length: 600 shelf height: 60 mm electrical connection: 230V / 50Hz / 16A V / Hz. dimensions L x W x H: 0,8 x 0,72 x 1,7 m Tool dispensing system - Warehouse management system Selection through automatic processes Electronic access to definable drawers via warehouse management software -Optimized storage and management of tools Storage above the drawers, rubberized, WxD: 720 x 190mm Equipment: Computer HP pro monitor and input device Hand scanner * Nodpfxsu Nkz Aj Ab Usdb

Condition: used, Year of construction: 1977, cutting diameter:250 mm band length:450 mm cutting speed:50/70/100/135 Hübe/min range L-W-H:2,6 x 1,8 x 1,1 mm total power requirement:3,8 kW Nsdpfx Abecxxw Ue Usdb weight of the machine ca.:1,2 t

Condition: excellent (used), Year of construction: 2001, Laser marking system Fab. Baublys Typ. BL 150 S/NC 500 Year 2001 Technical data Manufacturer: Baublys Type: BL 150 S/NC 500 Year of manufacture: 2001 Laser: 150 Watt Laser type Q-switch pulsed solid-state laser Laser medium Nd:YAG Wavelength 1064 nm Beam diameter approx. 1.2 - 1.3 mm after decoupling mirror at TEM00 Beam divergence 5 mrad TEM00 Pulse duration (time) CW / 90 ns Max. Output power 65 W multimode 16 W single mode Pulse energy 16 mJ at 3 kHz Beam deflection system Galvanometer system Line thickness with mixed mode approx. 0.12 mm Deflection speed 3 m/s; this corresponds to 200 characters/s at a height of 1.5 mm Nedpfoq Abnnox Ab Uedb and a single-line font Dimension: approx. Weight: approx. Power supply Voltage 400 V, three-phase current 50 Hz, 3 phases, clockwise rotating field Connection 5-pin CEE plug 16 A 6h Max. Power consumption 8.5 kW, max. 16 A per phase Fuse protection 3 x 16 A slow-blow Water connection Cooling water flow rate 7.5 l/min at 20°C flow temperature Connection thread to be discharged G 3/4" external thread Heat quantity approx. 6.5 kW Max. Cooling water temperature at inlet 20°C Water consumption dependent on inlet temperature Outlet temperature < = 35°C Ambient conditions for transportation and storage Temperature +5°C to +40°C Humidity < 70% Installation site Observe transport instructions Ambient conditions for operation Temperature +10°C to +40°C Humidity < 70% Installation location Observe transport instructions All information without guarantee. A demonstration is possible at any time in our exhibition hall.

Year of construction: 2026, condition: as good as new (ex-display), IMMEDIATELY AVAILABLE!!!! Manual cleaning is performed using special gloves in the front area. The effectiveness of the cleaning is ensured by a high-pressure pump and a special spray nozzle. In these devices, a temperature of up to 60 °C can be set for the cleaning fluid. The pressure can be adjusted from 1 to 80 bar. Nsdpfx Ajf A D Nmob Ujdb Technical data: Working area: 950 x 700 mm Internal height: 450 mm Load capacity: 70 kg, optional up to 150 kg Spray pressure: adjustable from 1-100 bar Tank volume: 75 liters / heating power 2 kW Standard version: • Blower gun inside • Frame, feet, lid, and housing made of stainless steel • Removable stainless steel sheets above the tank • Top-opening flap with 2 handles and gloves • Window made of tempered glass • Door opening/closing system with support from gas springs • Monitoring of door opening by means of a safety limit switch • Filter on the suction side of the pump (500 microns) • Foot switch for operating the cleaning pump • Interior lighting • Neoprene gloves, length 600 mm (chemical resistant) • Adjustable feet +/- 50 mm Optional: • Candle filter made of stainless steel with pump (10/25/50 microns) • External mini-pneumatic oil separator

Condition: used, machine/vehicle number: 053560166, sweeping width:72 cm Capacity:1450 Watt Ndjdpecxxt Sofx Ab Ujb total power requirement:1,27 kW weight of the machine ca.:0,225 t dimensions of the machine ca.:0,55 x 1,25 x 1,15 m

Year of construction: 2025, condition: new, Model 2025 for Industry 4.0! Laser marking system for: =ᐳ Marking =ᐳ Annealing of metals =ᐳ Marking of many materials =ᐳ Deep engraving Extremely detailed and high-contrast engravings thanks to the JPT-MOPA system fiber laser source (variable pulse width, on request). Simple operation and handling! Our exclusive XL laser marking system stands out due to: • Professional fiber laser source JPT MOPAfix 20 or 30W • 1064nm, 20-400 kHz (for perfect annealing engravings) • Scanner unit "New Generation ECO" • 19" PC control, no external card needed! • Very large viewing window with certified laser safety glass • Scanning area approx. 150 x 150 mm • Electric height adjustment • Full enclosure with 4 rollers • "Weightless" lifting door for safe marking. EZCAD III software: • Barcode and QR code support • Serial number function • Batch scanning from Excel file • Laser parameter finder via matrix with 2 parameters • TCP/IP connectivity for external components • Industry 4.0: The status can be processed at any time via the TCP/IP protocol. • Inputs and outputs for direct communication • New look and feel and fresh design • Even clearer and more intuitive operation • 3D preview for rotary axis machining • Performance increase of up to 50% through 64-bit architecture • Improved stability through integrated controller card • Optional up to 4 axis controls (integrated) • Optional DEEP engraving with Z-axis • More efficient algorithms for fast hatching. • Completely newly designed galvanometer generation • 2x laser pointer to check the focus position. • LED lighting of the marking area • Connection option for external extraction • Start button and emergency stop on the housing • USB and network connection for data access • Operating manual and operating software in German • Protective enclosure according to laser class 1 • Includes 4 hours of training in our training center (max. 2 people) Do you need something customized? We are happy to help. Choose from our numerous accessories: =ᐳ Camera systems for object recognition =ᐳ Fiber laser source in virtually all variations =ᐳ Motorized and automatic height adjustment =ᐳ Scanlab equipment =ᐳ Automation for part loading =ᐳ Conveyor belts for infeed and outfeed =ᐳ 3D marking and engraving function. =ᐳ Automatic focus adjustment =ᐳ Rotary unit =ᐳ Motorized slides =ᐳ Interlock system for marking WITHOUT a protective housing, but only with PPE (personal protective equipment) for bulky parts. Our engraving lasers naturally allow for individual customization in design and size! =ᐳ Made in Schweinfurt! Images may include options! Laser engraving machine, laser marker, laser marking, laser engraving, laser engraver, laser marking machine, laser engraving machine, laser marking system, marking laser. Laser engraving machine, laser marker, laser marking, laser engraving, laser engraver, laser marking machine, laser engraving machine, laser marking system, marking laser, Markierheld Ndedpfxsd S H Nyj Ab Ueb