Used Other material handling equipment for sale (480)

Year of construction: 2001, Condition: good (used), Top closing stapler with clamping anvils. For coil staples. Closing of filled folding boxes made of single and double corrugated cardboard. Economical closing of corrugated cardboard boxes with joining and overlapping of flaps with clamping anvils. Suitable for single and double corrugated cardboard. Adjustable penetration depth to suit the type of carton. Ideally suited for use in packaging lines where a high degree of accessibility and efficiency must be ensured. - Housing made of hardened steel for long life. - Clamping anvils return immediately: up to 20 staple cycles/minute - 1,000 staples per coil: up to 10 times less frequent reloading compared to ordinary staplers Cgjhova Nq Hexz Hk Dst For convenient operation, use a balancer in combination with a rotary arm system and a suitable spiral hose. See > accessories. MEROLOCK pneumatic stapler - For CR 1/34 spiral staples, arm length 18 mm, - with sound suppressor - With automatic return of the crimping anvil. - The clamping anvils are specially hardened to extend their life.

Condition: new, The scope of delivery includes: Heavy-duty anchor, HST2 Order quantity: 25 pieces Manufacturer: Hilti Design: Galvanized carbon steel Approved for: Cracked concrete Through-hole installation: + pre-positioned installation Diameter: M12 Drill hole diameter depth: 12 x 88 mm Nominal anchorage depth: 80 mm Effective anchorage depth: 70 mm Anchor length: 105 mm Clamping strength: 10 mm Cehxz Hkewhfluj Dsgt Weight per piece: 0.080 kg Weight per carton: 2.480 kg Your contact persons: Mr. Andre Evening Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item will incur additional costs, which can be requested from us separately depending on the delivery location or scope of delivery.

Condition: used, Year of construction: 2018, total length: 1,300 mm, front tire size: 200x50, rear tire size: 100/30-80, wheelbase: 270 mm, ground clearance: 60 mm, drive type: Gas, construction width: 840 mm, front tire type: RES, rear tire type: RES, Warehouse technology Cehxzswgpk Ss Hk Degt Kärcher B 40WBP Drive Gas Year built 2018

Condition: good (used), Stacking boxes, stacking boxes, plastic boxes, Euro stacking boxes, transport baskets, stacking baskets, Euro stacking containers, Euro stacking containers, small load carriers, storage boxes, shelf boxes Cgshxz Hksuzn Dfs Det -Manufacturer: Schoeller, Arca Systems shelf boxes -Type: 9131 -Quantity: 1536 boxes available -Price: per piece, minimum order 5 pieces -Dimensions: 595/115/H100 mm -Weight: 0.5 kg/piece

Condition: good (used), Approx. 4,000 pieces, nestable bicolor Euro stacking and nesting containers, 60 x 40 x 20 cm - used -: Price per piece ex-works (net): €7.50 For complete purchase: Price per piece ex-works (net): €6.00 Manufacturer: SCHOELLER ALLIBERT Cgohxzjwgbc Te Hk Dot Type: 11032 Year of manufacture: unknown Dimensions: 60 x 40 x 20 cm 50L Approx. 30 pallets (4,000 pieces), Reversible stacking and nesting containers in two-tone gray/red. Standard sizes 600x400 for Euro-sized pallets Nest up to 70% for maximum storage efficiency Ergonomic handles Bi-color ensures the container is properly stacked for either stacking or nesting, and prevents accidentally crushed contents A particular advantage of this type is its dual function; the crates can be stacked either on top of each other or inside each other, which is very convenient for use and space-saving storage. This is clearly visible in the attached photos. New price: approx. €15 / piece Condition: good Available: immediately, delivery time approx. 4 weeks (the crates are currently stored at a customer's branch in Tunisia) Location: 63796 Kahl am Main

Condition: used, This scaffolding is being auctioned online in our industrial auction/machinery auction, Pieger Roof + Wall, which includes roof tiles, gutters, bending machines, tools, roofing accessories, and heavy-duty shelving. Cshxz Hkowhc Ume Djgt You can find these and many other items on our platform.

Condition: used, Functionality: fully functional, Furniture corlette trolley type 1300 Cohswg D I Sexz Hk Dsgt each approx. 130/115/195 cm

Condition: good (used), Note: The images are for illustrative purposes only. - The workbench frames are commissioned unassembled; Cshxzswgicbj Hk Degt - Production time is typically approximately 3-5 business days. Basic dimensions: Width: approx. 1,250 mm Depth: approx. 700 mm Height: approx. 940 mm Included in delivery: 4x square tubes, used Material color: Sendzimir galvanized Profile height: approx. 900 mm Square profile: 140 x 140 x 4 mm Drill hole pitch: 75 x 50 mm Drill hole diameter: 13 mm 2x CS Sigma profiles, used Material color: Sendzimir galvanized CS Sigma profile: approx. 300 x 75 x 20 mm Profile length: approx. 970 mm 2x CS Sigma profiles, used Material color: Sendzimir galvanized CS Sigma profile: approx. 300 x 75 x 20 mm Profile length: approx. 420 mm 1x chipboard, used Thickness Chipboard: 38 mm Chipboard width: 1,250 mm Chipboard depth: approx. 700 mm Surface: coated if necessary (two-part if necessary) 6x self-drilling screws, new Version: galvanized Dimensions: 6.3 x 70 mm 16x screws: M12 16x nuts: M12 16x washers: M12 Your contact person in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Requesting additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location and scope of delivery.

Condition: used, Year of construction: 2022, operating hours: 228 h, power: 2 kW (2.72 HP), total length: 2,020 mm, wheelbase: 1,300 mm, ground clearance: 10 mm, lifting height: 4,350 mm, free lift: 920 mm, mast type: triplex, fork carriage width: 780 mm, drive type: Elektro, load capacity: 1,600 kg, construction width: 800 mm, net weight: 1,154 kg, · Bedienung Geh/Stand · Nenntragfähigkeit 1600 (2000)kg · Lastschwerpunktabstand 600 mm · Lastabstand 724/646 mm · Achslast mit Last antriebsseitig/lastseitig 979/1850 kg · Achslast ohne Last antriebsseitig/lastseitig 962/268 kg · Bereifung Polyurethan · Reifengröße antriebsseitig mm ⌀ 230 x 90 · Reifengröße lastseitig mm ⌀ 85 x 85 (⌀ 85 x 60) · Stützrollengröße mm ⌀ 150 x 50 · Spurweite antriebsseitig/lastseitig 534// 380/500 mm · Höhe Deichselgriff in Fahrstellung min./max. 1175/1380 · mm · Gabelhöhe gesenkt mm 86 · Arbeitsgangbreite bei Palette 800 x 1200 längs 2390 / · 2777 mm · Wenderadius 1507/1894 mm · Fahrgeschwindigkeit mit/ohne Last km/h 4,0/4,0 6,0/6,0 8,0/10,0 · Hubgeschwindigkeit mit/ohne Last m/s 0,15/0,30 · Senkgeschwindigkeit mit/ohne Last m/s 0,40/0,35 · Max. Steigfähigkeit kB 5 mit/ohne Last %: 10,0/22,0 · Betriebsbremse Elektromagnetisch · Fahrmotor, Leistung S2 = 60 min kW 2,3 · Hubmotor, Leistung bei S3 = 15 % kW 3,2 · Batterie nach DIN 43531/35/36 A, B, C, nein 2PzS · Batteriespannung/Nennkapazität K V/Ah 24/230 · Li-Ion: 24/205 · Batteriegewicht ±5 % (herstellerabhängig) kg 212 · Energieverbrauch nach DIN EN 16796 kWh/h 0,84 · Art der Fahrsteuerung AC-Steuerung Cehxzovfhfge Hk Dogt · Schalldruckpegel (Fahrerohr) dB(A) ≤66

Condition: good (used), Platform trolleys, transport trolleys, heavy-duty trolleys, table trolleys, assembly trolleys, industrial trailers, container dollies, roll/cargotrailers, roll trailers, cargo trailers -Heavy-duty transport vehicles: industrial trailers -Platform: 17470/2545/H850 mm / 17345/2545/H850 mm -Load capacity: approx. 85 t -Tires: solid rubber Cjhxzol Ab D He Hk Dogt -Quantity: 1 piece available -Price per piece -Dependent weight: 8000 kg/pc.

Year of construction: 2020, Condition: good (used), Remmert LaserFLEX | Fully automated loading and unloading – used - : Price ex-site: €145,000 (net) plus disassembly, etc.! Manufacturer: Remmert Type: LaserFlex Year of manufacture: approx. 2020 Format 3015 Load capacity: 1,000 kg 220 kg/m2 Maximum sheet dimensions: 3048 x 1524 mm Maximum sheet thickness: 25 mm SMART Control 4.0 Can be combined with a sheet storage unit (the sheet storage unit is not included in the sale) Former new price: €250,000 (net) Manufacturer's description: Equipped with two automation units – a loading unit and an unloading unit – the LaserFLEX enables the decoupled feeding of a laser cutting system. After the cutting process, a fork unit lifts the processed metal plate from the shuttle table. At the same time, a new sheet is transported from the connected storage area by a vacuum unit. As soon as the plate is positioned next to the laser system, the unloader loads the system with the workpiece. This process takes only one minute. With the LaserFLEX, downtimes of integrated laser cutting systems are virtually zero, as even lasers with high processing speeds are optimally supported. Special features: • Changeover times of approximately one minute (at 3015) • Highly automated production processes • Decoupling of loading and unloading of the laser cutting system • Manufacturer-independent integration of laser systems • Flexible storage design with tower storage or large-scale systems • Reduced downtime of the processing machine • Connection of multiple laser systems in a chain configuration • Integration into the existing storage and production landscape • Intuitive, graphical touch operation with visual status management • Modern industrial design Fast, flexible solution for automating laser systems Increased productivity in laser processing Fastest sheet metal changeover time on the market Smooth integration into the existing production environment Handling of any sheet metal blanks Effective supply and disposal of multiple laser systems Intuitive, graphical touch operation with visual status management Cgjhswga E Toxz Hk Dot Innovative, modern industrial design Condition: good Available from: immediately Location: 46419 Isselburg

Condition: new, The vertical shelving system is a sophisticated storage solution for the upright storage of long goods such as roof battens, skirting boards, pipes, or beams. It was specially developed for both commercial and private use and offers a particularly space-saving alternative to traditional horizontal storage. Thanks to the vertical storage, only a minimal footprint is required – ideal for confined storage areas or self-service areas in retail. The scope of delivery includes: 1x Vertical Shelving System, new Shelf height: approx. 3,050 mm Shelf depth: approx. 1,000 mm Shelf length: approx. 4,660 mm Overhang: approx. 500 mm Cgshxz Hkewd Suhe Dst Your contact persons in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately from us depending on the delivery location and scope of delivery.

Condition: good (used), Platform trolleys, transport trolleys, heavy-duty trolleys, table trolleys, assembly trolleys, industrial trailers, container dollies, heavy-duty trailers -Handover: in the current condition as viewed -Note: Check the condition of the wheels -Platform: 11,000/3000/H1100 mm Cehxzerg Iuzs Hk Degt -Load capacity: 100 tons -Steering: double -Drawbar length: 1500 mm -Drawbar eye: Ø 50 mm -Wheels number: 32 pieces -Wheel size: 646/200-480 -Number: 2 heavy-duty transport trolleys available -Price: per piece -Dimensions total: 12,300/3000/H1100 mm -Weight: 12960 kg

Condition: good (used), Lot with approximately 557 Corlettes, Cordes and Koch, widths 1.30m / 2m / 2.50m / 2.70m - mostly with runners, mostly NOT stackable, a few stackable, used -: Prices (net) per piece ex location: Width 1.30m: Type 1a: Non-stackable: €65 Type 1b - 1g: Non-stackable: €69 Stackable: €89 Width 1.95m: Type 2a + 2b non-stackable: €99 Width 2m: Type 3 non-stackable: €99 Width 2.50m: Type 4 non-stackable: €109 Width 2.70m: Type 4 not Stackable: €119 Manufacturer: partly Koch, partly Cordes Type: unknown Year of manufacture: unknown Load capacity: 600 kg If stackable: 600 kg load, stackable three-high Usually with runners for positioning/storage in Corlette shelving Condition: good - very good Available: immediately Location: Würzburg Type 1a - approx. 81 units, + 1 non-stackable 1.30 m Low Type: mc-130.641 Weight: 72 kg Stackable three-high Dimensions: Width: 1.28 m, Depth: 1.14 m, Height: 1.40 m Type 1b - approx. 25 non-stackable 1.30 m Year of manufacture: unknown Dimensions: approx. Width: 1.28 m, Depth: 1.14 m, Height: 1.80m Not stackable Own weight: approx. 85kg Type 1c – approx. 383 units, not stackable 1.30m Year of manufacture: unknown Dimensions: approx. Width: 1.28m, Depth: 1.14m, Height: 1.88m Not stackable Own weight: approx. 85kg Type 1d – approx. 29 stackable units 1.30m Year of manufacture: unknown Dimensions: approx. width: 1.28m, depth: 1.14m, height: 1.88m Stackable Weight: approx. 80kg Type 1e – approx. 4 stackable units 1.30m Year of manufacture: unknown Dimensions: approx. width: 1.28m, depth: 1.14m, height: 2.04m Weight: approx. 95kg Type 1f – approx. 5 stackable units 1.30m Year of manufacture: unknown Dimensions: approx. width: 1.30m, depth: 1.14m, height: 2.04m Weight: approx. 95kg Type 1g – approx. 2 stackable units + 1 non-stackable unit 1.30m Year of manufacture: unknown Dimensions: approx. Width: 1.28m, Depth: 1.14m, Height: 2.40m Weight: approx. 95kg Type 2a - 4 units, non-stackable 1.95m Year of manufacture: unknown Dimensions: approx. Width: 1.95m, Depth: 1.14m, Height: 1.76m Weight: approx. 80kg Type 2b - 4 units, non-stackable 1.95m Year of manufacture: unknown Dimensions: approx. Width: 1.95m, Depth: 1.14m, Height: 1.89m Weight: approx. 80kg Cshxjwd Shbsz Hk Dogt Type 3 - 5 units, non-stackable 2m Year of manufacture: unknown Dimensions: approx. Width: 2m, Depth: 1.14m, Height: 1.80m Weight: approx. 80kg Type 4 - 1 unit, non-stackable Stackable 2.50 m Year of manufacture: unknown Dimensions: approx. Width: 2.50 m, Depth: 1.14 m, Height: 1.89 m Weight: approx. 80 kg Type 5 – 12 units, non-stackable 2.70 m Year of manufacture: unknown Dimensions: approx. Width: 2.69 m, Depth: 1.14 m, Height: 1.80 m Weight: approx. 80 kg

Condition: new, The vertical shelving system is a sophisticated storage solution for the upright storage of long goods such as roof battens, skirting boards, pipes, or beams. It was specially developed for both commercial and private use and offers a particularly space-saving alternative to traditional horizontal storage. Thanks to the vertical storage, only a minimal footprint is required – ideal for confined storage areas or self-service areas in retail. The scope of delivery includes: 1x Vertical Shelving System, new Shelf height: approx. 3,050 mm Shelf depth: approx. 1,000 mm Shelf length: approx. 2,360 mm Overhang: approx. 500 mm Cehxz Howd Srmsk Degt Your contact persons in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately from us depending on the delivery location and scope of delivery.

Condition: good (used), Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, double turntable steering, heavy-duty trailer -Heavy-duty transport vehicle: Industrial trailer with 2-axle steering Cgohxz Hst Rbkcek Dst -Platform: 2500/1255/H490 mm -Load capacity: 11 t -Tires: solid rubber -Number: 4x transport trolleys available -Price per piece -Total dimensions: 4360/1255/H490 mm -Weight: 780 kg/pc.

Condition: good (used), Year of construction: 2012, Compartment divider / divider for drawer cabinet / drawer shelf, Garant, – used -: Price for the complete pallet: €750 (net) ex-works, disassembled, packed, and loaded! Manufacturer: Garant Cehxjwdwu Tsz Hk Dsgt Year of manufacture: 2012 Condition: good Available: immediately Location: Braunschweig

Condition: excellent (used), Furniture rollers, furniture dog plastic castors, furniture transport trolleys, transport rollers, platform trolleys, transport trolley wheels, heavy-duty trolleys, table trolleys, assembly trolleys, complete wheels, tires with rims, -Manufacturer: Kettler Segers complete bike, unused Cjhohbtc Hoxz Hk Djgt -Tires: Kettler Duro HFR 3.00-4 -Rim: without bearing, inner Ø 26 mm -Quantity: 22 pieces -Price: per piece -Dimensions: Ø 253 x 80 mm -Weight: 1 kg/piece

Condition: good (used), Back wall / fence elements – used -: Cgehxzswdwpwe Hk Dot Price for the entire range ex-works: only €2,000 (net)! Manufacturer: Unknown Type: Unknown Year of construction: Unknown Dimensions etc. unknown Condition: Good Available: Immediately Location: Braunschweig

Condition: good (used), Approx. 52 trash cans including metal frame and base, with "trash bags" made of sturdy tarpaulin, blue and orange – used – : Price for complete set from location: only €999 (net)! Price for partial quantities: €25 (net) / piece, minimum order of 10 pieces! Manufacturer: Type: Cgjhxzewdwpks Hk Dst Year of construction: unknown Dimensions: Opening approx. 50 x 50 cm Height: approx. 1 m Condition: good, with company logo Available: immediately Location: Braunschweig

Condition: good (used), 7 x platform wagons with side supports, large freight wagons – used -: Price – for all together – ex-works: only €950 (net)! Manufacturer: unknown Cehxz Hkowcprbo Dsgt Type: unknown Year of manufacture: unknown Nesting Sturdy side supports Dimensions: Width approx. 54 cm, length approx. 1.01 m New price approx. €400 / piece Condition: good Available: immediately Location: Würzburg

Condition: excellent (used), Year of construction: 2021, approx. 24 very high-quality work tables with storage shelves for cardboard boxes, for example - used -: Price per piece from location: €950 (net). When purchasing 4 or more pieces: €850 (net) / piece When purchasing 4 or more pieces: €650 (net) / piece Price for 1m connecting table: €100 (net) / piece Manufacturer: Garant Year of manufacture 2021 Worktop with V2A support Per workstation: 1 drawer box with 3 drawers each Width: approx. 2m Depth: approx. 70cm Depth per drawer: approx. 55cm (outside) Width per drawer: approx. 53cm (outside) There are also approx. 4 connecting pieces each approx. 1m wide Height of worktop approx. 85cm Height adjustment up to 150 mm Color RAL 7035 Incl. support columns and shelf with steel bracket / compartment dividers Depth of shelf for e.g. cardboard boxes: approx. 80cm Cshsvx A Susxz Hk Dsgt Width of the storage shelf: approx. 1.50m Height of the storage shelf from the table top: approx. 1.30m New price: approx. €2,000 Condition: good Available: immediately Location: Braunschweig, viewing desired

Year of construction: 2022, Condition: good (used), Heavy-duty industrial trailer, Kampa, 20 ton with roof – used -: Price ex-site: €16,500 (net)! Manufacturer: Kampa Type: Industrial Trailer SLA VRA 54265 Series: SLAMini VRA Year of Manufacture: 2022 Trailer Item Number: 54265 Weather Protection Roof Item Number: 54266 Trailer Item Number Including Roof: 54267 Steering System: Four-Wheel Steering Project No./Type Plate: 202220015 Maximum Speed in km/h: 6 Loading Area Size: 6,000 x 2,600 mm Load Capacity: 20,000 kg Own Weight: 3,325 kg (without roof) The roof has a height, measured from the loading area, of approximately 2.56 m. The loading area is approximately 0.77 m above the ground. This means the total height is approximately 3.33 m. The roof is easy to remove: 4 x 4 screws on the chassis (see below). Condition: Good Available: Immediately Location: 40549 Düsseldorf Cgehswdi Aiexz Hk Det

Condition: good (used), Approx. 60 rolling clothes rails / clothes stands - used -: Price per piece (net) ex works! Price for orders: from 10 pieces: €45 Complete order: only €39 Minimum order: 10 pieces! Manufacturer: Zill Type: unknown Year of manufacture: Details: • Clothing rack, height 150 cm, high-gloss chrome-plated • Clothing rack with two extension rods • Rolling rack with permanently welded joints • Rolling rack with Ø 80 mm casters (2/2), also for outdoor use High-gloss chrome-plated clothing rack with Ø 80 mm plastic casters, two of which are equipped with brakes. The rolling rack is made of Ø 28 mm round tubing and is assembled using a click lock. All permanent connections are welded and therefore very durable. The clothing rack is 150 cm high. The clothing rack has extension rods on the right and left, each extending by 30 cm. Cgshxz Hswcd Drjk Djt The lower crossbar is secured with metal clips that won't accidentally come loose, even under heavy use. Thanks to its 80 mm diameter rubber casters, the mobile stand can also be used for outdoor sales. Condition: Good Available: Immediately Location: Neckarsulm

Condition: good (used), over 200 pieces of pick-by-light display / modules, - used - : Cgohxz Hkjvzll Ns Djt Price per piece from location: only €15 (net)! If you are interested, the aluminum plug-in rails are also for sale! Manufacturer: KBS Type: PTF-3N-1-VAR20 Year of manufacture: unknown Condition: good Available: immediately Location: Lunzenau warehouse