Statomat braking device

AER B 122420/V16

Condition: excellent (used), Calibration and fine sanding machine with 1 sanding unit 1 motor, processing from above Working width 1000 mm Sanding belt dimensions 2200 x 1030 mm Workpiece dimensions 3 - 170 mm Table height adjustment motor 0.18 kW, 400 V, 50 Hz Main motor 7.5 kW, 400 V, 50 Hz 2 feed speeds 5.5 & 11 m/min 1st unit: Combination unit, sanding drum, rubberized, 90 Sh / pneumatic sanding pad Sanding pad NEW 2nd unit: Cleaning brush Compressed air requirement approx. 6 bar Suction diameter 200 mm Dimensions approx. L x W x H = 1385 x 1980 x 1900 mm Weight approx. 1800 kg Automatic workpiece thickness adjustment with digital display Oscillation of the sanding belt Sanding belt emergency stop with disk brakes Table extension with 3 rollers in the outfeed Emergency stop button Main switch TRANSPORT CARPET LIKE NEW - was replaced by us approx. 3 years ago MORE THAN 30 WIDE BELT SANDERS Note used machines: - Subject to errors in technical specifications and prior sale. Fgedpfjudxchjx Addek - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: reconditioned (used), Year of construction: 1993, functionality: fully functional, Weight approx. 1140 kg Connected load 380V 7.5kW Scoring unit 0.75 kW manually adjustable via pneumatic connection, can be raised and lowered Trimming length 2800 mm speeds 600/5000/4000/3000 rpm via V-belt Fsdpfxeq Au Hus Addjgk Electric tilt with digital display Electric height adjustment with digital display Cutting width 1000 mm rear support table 950 x 400 mm wide angle fence 2500 mm with extension 2840 mm with 2 stops suction connection 120 mm + 80 mm for PSV Parallelogram protection device with narrow and wide hood Trimming fence Air requirement for scorer 6bar connection

Condition: reconditioned (used), Year of construction: 1987, functionality: fully functional, machine/vehicle number: 1277/8-71, Connected load 380V 7A cutting length 4300 mm cutting height 1925 mm Fgodoh U Sqrepfx Addsk rack height 2210 mm machine height 2500 mm room height 2540 mm trimming height 1870 mm Passage height 1940 mm

Year of construction: 1998, condition: excellent (used), Panel saw for Plexiglas and wooden panels with suction device very good condition Max cutting height: 2200mm Max cutting length: 4200mm Max. cutting thickness: 60mm Length: 5600mm Depth: 1400mm Height: 2900mm Weight: 850kg Fsdpsinunqofx Addogk

Condition: good (used), Year of construction: 1991, operating hours: 678 h, functionality: fully functional, working width: 1,100 mm, grinding width: 1,100 mm, overall weight: 2,000 kg, grinding height: 150 mm, power: 17 kW (23.11 HP), grinding belt length: 1,900 mm, input frequency: 50 Hz, workpiece width (max.): 1,100 mm, Sandingmaster KCSB-1100 1-belt combo with electro-pneumatic sanding shoe for insertion and removal - Cleaning brush - Automatic carpet centering - Digital display - Electric Sandomatic - Belt dimensions 1130 x 1900 mm - Working width 1100 mm - Electric height adjustment 3- 150 mm - Max. workpiece height 150 mm - Feed speed m/min 7 + 14 - Motor power 15 kW - Total connection approx. 17 kW - Net weight 2000 kg Fodpfovqbc Nsx Addogk - Condition: Full functionality tested by us

Condition: reconditioned (used), Year of construction: 1991, functionality: fully functional, grinding width: 1,100 mm, "M.-No. 2679, built 1991, Technical data: max. working width: 1100 mm, min./max. workpiece thickness: 3 / 160 mm, sanding belt dimensions: 2150 x 1120 mm, sanding belt speed: 18 m/sec., feed speeds: 4 + 8 m/min, Motor power sanding unit: 11 kW, power setting: 0.55 kW, feed carpet: 1.3/1.8 kW, operating pressure: 6 bar, air requirement: 10 l/min., extraction sockets: 1 x 150 + 1 x 120 mm, WxDxH: 1800 x 2000 x 2100 mm, weight approx. 2400 kg, Fsdpfx Adjtppz Isdegk Standard equipment: - Contact roller D=150 mm, hardness 90° Shore - Air sanding pad with automatic insertion and removal - Rigid sanding pad for solid wood frame sanding - Brush roller driven by the sanding unit - Automatic centering of the feed carpet - Feed carpet with high-quality rubber circular hole carpet and auto. Carpet centering - pneumatic sanding belt tensioning with length compensation - non-contact sanding belt oscillation, electronic - low-wear disc brake system for immediate stop of the sanding belt drive with pressure monitor - motorized thickness adjustment with digital display - workpiece thickness limiter at the infeed - semi-automatic workpiece thickness adjustment - grit thickness compensation for contact roller 4-fold, special accessory: workpiece thickness gauge".

Condition: used, Year of construction: 2001, Used machine Year of manufacture: 2001 Condition: well maintained Features and technical data: Cutting length: 4300 mm Cutting height: 2200 mm Cutting depth: 45 mm Motor: 3 kW Saw blade diameter: 220 mm Fgodpjxb Hf Hofx Addjk with SuperCut scoring unit with automatic shifting grid with complete length stop with strip stop Availability: short-term Location: 65439 Flörsheim

Condition: used, machine/vehicle number: FGEX130.11850, Year of construction: 1982, weight max. in kg:1600 kg stroke:4315 mm fork length:1150 mm height over floor:2050 mm Fgsdpfxjcxxx Ee Addjk battery:80 V width of fork carrier plate:1000 mm weight of the machine ca.:3800 KG dimensions of the machine ca.:3,27 x 1,09 x 2,05 m :2,12 x 1,09 x 2,05 m Very compact and agile electric fork lift with front lights and rear-view mirrors. Mechanically-adjustable forks. UVV until 02/2008

Year of construction: 2011, condition: excellent (used), SLIDING SAW GOMAD TYPE FBKSR I will sell a GOMAD FBKSR format saw, table length 3800. Condition as in the photos, year of production 2011 with or without extraction, documentation, manuals, the machine is operational, price on request the machine has a scoring unit and the rocker saws are technically efficient main saw 400 mm blade, scoring saw 100 mm setting at an angle of 45 degrees cutting length 2800 mm cutting width 1250 mm, ruler on electronics. Rotation 4000/5000 / 6500min. -1; Fgodpjia Ngtefx Addsk weight 990 kg

Condition: used, Electric motor, three-phase motor -Manufacturer: ZSE MEZ, electric motor type 3APJC80-2 -Power: 0.55 kW -Speed: 2890 rpm Fgjdpfx Adegicaasdok -Shaft: Ø 19 x 40 mm -Voltage: 220V -Design: B3 -Protection class: IP 44 -Dimensions: 310/165/H195mm -Weight: 12kg