Used Heating & blowers for sale (248)

Condition: excellent (used), Year of construction: 2004, Overall weight: 3,500 kg, Pressure: 6 bar, Heating capacity: 1,40,000 W, Temperature: 120 °C, Tank capacity: 2,040 l, Gas connection: g20, Frequency: 50 Hz, Equipment: Hot Water, Viessmann VITOPLEX SX1 1400kw gas boiler, boiler with WEISHAUPT G30/2A gas burner Manufacturer: Viessmann VITOPLEX SX1 Year of manufacture: 2004 nominal heat output: 1400Kw boiler water capacity: 2040 liters Max. water pressure in the heating circuit: 6 bar Efficiency: 94% heating circuit water temperature max: 120°C nominal voltage: 230v 50Hz 6A boiler controller: Vitotronic 100 chimney pipe diameter: 390mm Sizes: length: 2900mm width: 1800mm height: 2300mm weight: approx. 3000 kg Gas burner: Weishaupt G30/2A complete assembly. design: ZM-LN year of manufacture: 2003 heat output: min 300- max 1800kw connection pressure: min 15- max 500 Mbar gas type: natural gas Ccn83T8Nlm gas control valve: DUNGS DMV-D 5065/11 pressure switch: Dungs LGW 50 A2P Siemens SQM10.16532 actuator Leakage tester Dungs VPS-504 S04 with stuffing box Tightness checker Dungs VPS-504 S04 Electrical power: 5.95 kw control voltage: 230v 50Hz 1 phase mains voltage: 400v 50Hz 3 phases

Condition: good (used), 1 hall heating system consisting of: - Hall heater REMKO - Oil tank capacity approx. 3.000 l Dnro8B8Om - collecting pan self-made, dimensions (WxHxD) approx. 300x80x100 cm, - various piping used, from a company liquidation

Condition: used, Year of construction: 2013, Oil heater fan used Year of manufacture 2013 Power: 33 kW 112.800 Btu/h 28.400 Kcal/h Air flow rate: 1,800 m3/h Fuel consumption in: 2.71 kg/h Tank capacity: 65 l Dimensions (l x w x h): 1200 x 650 x 1000 mm Mains voltage: 220-240/50 V/Hz Power consumption: 3,5 A Thermostat control: possible Net / Gross weight: 61 / 77 kg Electrical power: 0,8 kW Exhaust air opening Ø: 150 mm I8Uveegsk Air outlet Ø: 340 mm Fuel autonomy: 21 h Protection class: IP41 Clean warm air Possibility of connecting an additional room thermostat Connection to flexible pipe possible Flue gas outlet Large air passage Overheating thermostat Final ventilation External transparent intake filter Three oil filters: oil pump filter, intake filter and inlet filter Electronic flame control with photocell Heat exchanger Electronic flame control with photocell heat exchanger Oil tank with level indicator Chassis included Easy maintenance Robust and durable construction LED light Notes on waste oil disposal in accordance with the current Waste Oil Ordinance: This oil belongs to a waste oil collection point after use! Improper disposal of used oil endangers the environment! Any admixture of foreign substances such as solvents, brake fluids and coolants is prohibited. According to the Waste Oil Ordinance, we are obligated to take back combustion engine oils, transmission oils as well as oil filters and oil-containing waste (hereinafter collectively referred to as waste oil) regularly generated during oil changes free of charge. You can return the used oil to our collection point in the quantity corresponding to the quantity purchased from us. Please enclose a corresponding proof of purchase. Our acceptance point has equipment that enables an oil change to be carried out professionally. Availability: short term Storage location: Hocheim

Condition: ready for operation (used), Year of construction: 1996, Operating hours: 1,00,000 h, Functionality: fully functional, Machine/vehicle number: 120.0101.G.07, Power: 120 kW (163.15 HP), Total width: 920 mm, Total length: 1,865 mm, Total height: 1,860 mm, Type of input current: three-phase, Pressure: 3 bar, Input voltage: 400 V, Temperature: 95 °C, Tank capacity: 380 l, Frequency: 50 Hz, Equipment: Hot Water, Type Plate Available, Fully functional heater is for sale. To be replaced due to renewal. The boiler has an output of 120kW. The booster (heat recovery) is an additional heat exchange surface and generates approx. 25kW under full load (heat is extracted from flue gas). In addition to the boiler, the conveyor technology is also included. This includes an articulated arm discharge with a diameter of 5m and all screw conveyors. An induced draught in the flue gas pipe is included. Heating including conveyor technology 2000€ Heating including conveyor technology and booster 3000€ Price applies to self-dismantling Gxcwq03 Please contact us if you have any questions!

Condition: like new (used), Year of construction: 2015, For sale is a working and very well maintained gas burner, brand WEISHAUPT Monarch WM G20/2-A (2100 kw) incl. gas fitting Dungs DN 65 and WEISHAUPT WM G20/2-A (2100 kw) - Output : 150- 2100 kw - Connection pressure : 15-500 mbar - Version : ZM - Delivery is possible on request - All technical data can be seen in the pictures Celodp3J8V Preferential sale to dealers, traders or export. All information without guarantee, errors and prior sale reserved. The seller accepts no liability for typing and data transmission errors.

Condition: excellent (used), Year of construction: 2011, Buderus GB312 gas condensing boiler Output: 160Kw Viewing by telephone only! Preferred sale to dealers, traders or export. All information without guarantee, subject to errors and prior sale. The seller accepts no liability for typing and data transmission errors. Of course we also take care of all formalities Cofwiny2By Loading possible

Condition: used, Year of construction: 2006, Pressure: 6 bar, Temperature: 105 °C, Viessmann VITOPLEX SX1 Heizkessel with WEISHAUPT G30/2A Gasbrenner. / ct1962 Manufacturer: Viessmann VITOPLEX SX1 Dppbrr Year of construction: 2006 Nennwärmeleistung: 1400 kW Kesselwasserinhalt: 2040 liters Max. Wasserdruck im Heizkreis: 6 bar Efficiency: 94% Maximum water temperature in the heating circuit: 105°C Nominal voltage: 230V 50Hz 6A Boiler control: Vitotronic 100 Fireplace pipe diameter: 300 mm Dimensions: Length: 2540 mm Width: 1380-1840 mm Height: 1900 mm Weight: approx. 2500 kg Gas burner: Weishaupt G30/2A Komplettbaugruppe. Version: ZM-LN Year of construction: 2007 Heat output: min. 300 - max. 1800 kW Connection pressure: min. 15- max. 500 Mbar Gasart: Erdgas Gas control valve: DUNGS DMV-D 5065/11 Druckschalter: Dungs LGW 50 A2P Siemens SQM10.16532 Stellar Drive Leckageprüfgerät Dungs VPS-504 S04 with Stopfbuchse Dichtheitsprüfer Dungs VPS-504 S04 Electric power: 6 kW Control voltage: 230 V 50 Hz 1 Phase Mains voltage: 400 V, 50 Hz, 3 Phase

Condition: new, 50 pcs. Heating element heating resistor, remaining stock - 3x1667W - 400V - Cod. 816228/02 - DHK 371 - MTS 923 141 Ccck2Hg - 04/16 - Condition: see pictures

Condition: good (used), Year of construction: 2010, Functionality: fully functional, Machine/vehicle number: KU100/21-34-17, Power: 45 kW (61.18 HP), Frequency: 50 Hz, As can be seen in the pictures, this chamber kiln is in exceptionally good condition. We have sometimes dried up to 8 pallet cages per drying cycle with this kiln. Dn8Kvp Example: A brake caliper core with 5 kg, in total 1800 kg at full load, dried at 80°C in 30-45 minutes. All machines, equipment and articles are sold second-hand. Warranty, exchange and guarantee are excluded. Goods are purchased as inspected on site. The sale is exclusively ex works

Condition: used, electric heating, electric radiator, heating coil, electric heating, surface storage heating, surface heating -Manufacturer: Wibo, surface heating type thermatic 1000 with thermostat -Power: 1000 watts -Voltage: 220V -Number: 2x heating available -Price: per piece Cq2Cyt9Ccu -Dimensions: 800/110/H620 mm -Weight: 20 kg/piece

Condition: used, Year of construction: 2012, Working dual-fuel burners/oil burners/gas burners of the following types are for sale - 1st Weishaupt dual-fuel burner oil/gas of the brand Weishaupt GL 7/1-D, year of construction 2010, incl. gas line - 2. dual fuel burner/oil burner/gas burner, brand ELCO KLÖCKNER - burner type : EK 6.200 (1710 kw) ,with oil pump, incl. gas line Dungs DN 50.year of construction 2012 WEISHAUPT GL 7 - Output : 300 -1750 kw - 25 - 147 kg/h - Design : ZMD ELCO KLÖCKNER - Burner type : EK 6.200 GL - Output : 279-1710 kw - Capacity : 50 - 163 kg/h - Connection pressure : 15-300 mbar - Version : EU - With oil pump - Delivery is possible on request - All technical data can be seen on the pictures B2Onmmiskt Preferred sale to dealers, traders or exporters All information without guarantee, errors and prior sale reserved. The seller assumes no liability for typing and data transmission errors.

Condition: reconditioned (used), Year of construction: 2022, Functionality: fully functional, Power: 700 kW (951.73 HP), Overall weight: 5,000 kg, Total width: 2,438 mm, Total length: 6,058 mm, Total height: 2,591 mm, Description: For sale is a high-quality heating container, ideal for larger heating projects or temporary use in industrial or commercial facilities. The container is equipped with: C07Odezyh3 Boiler: Viessmann Vitoplex 200 with an output of 700 kW - known for its efficiency and durability. Burner: Riello RL 70 TC forced draught oil burner with an output range of 255/474 to 830 kW, type 660 T1 - reliable and powerful. Hydraulic separator - for optimum temperature control and heat exchanger function. Oil tank: 2000 liters - sufficient capacity for a longer operating time. Remote monitoring system: The heating container is equipped with a modern remote monitoring system that makes it possible to monitor operating statuses and performance data remotely at any time and react quickly if necessary. The heating container is ready for immediate use and has been regularly serviced. It is particularly suitable for use on construction sites, for temporary heat supply or as additional heating for larger systems. Year of construction: 2023 There are 2 containers for sale (individual price €100,000) Available immediately If required, the container can also be delivered and connected. This will be done at cost or on quotation.

Condition: like new (used), Year of construction: 2021, gas tube heater Solaronics TUE 23 Bjd0Zaz8Bwe production year: 2020-22 heat output: 23kw gas burner + exhaust fan pipe length: 2x 4.9 meters G20.1 Nominal connection pressure: 25 mbar Nominal gas consumption: approx. 2.5 m3/h Gas connection: 1/2 " Connection voltage: IP21 AC 230V 50Hz

Condition: new, 1 pc. Meibes Cipag heating circuit distribution bar, retail - Brand: Meibes / Cipag - 2-way - up to 3 heating circuits - up to 70 KW - Material: steel/stainless steel Cp7Byoema - EAN: 240003205 - Condition: new, A-goods

Condition: good (used), Year of construction: 2001, Max heat output: 190,000 kcal/h Consumption: 18.63 kg/h Net heat output: 197.90 kW Dpkz8P Air flow rate: 12,500 m3/h Electrical power: 4.330 W Fuel: Diesel oil

Condition: used, Thermal system, fan heater, heating elements, radial heater fan -Handover: in current condition as viewed Cl3Szfs73Y -Controller/On/Off switch: missing -Heater fan: with temperature display -Heating capacity: unfortunately not specified -Blower: Karl Klein Type DNG 1-1,5K -Blower power: 0.45 kW / 31 m³/min -Outlet: Ø 60 mm -Number: 3x blowers available -Price: per piece -Dimensions: 320/265/H475mm -Weight: 10.2 kg/piece

Condition: excellent (used), Year of construction: 2005, For sale are working and very well preserved oil burners of the brands weishaupt RL 40/1-B (2735) kw and L7- (1965 kw) and Ecoflam MAIOR P60 PR TL (710kw) - new Unused in original packaging 1. -Weishaupt : RL 40/1-B -Burner type : RL 40 -design : ZM -Power: 535-2735 kw 45-230 kg/h -Year of construction : 2012 2. - Weishaupt: L7T (1965 kw) - Burner type : L7T -Design: D -Output: - 325-1965 kW 27-165 kg/h - Year of manufacture: 2004 3. Weishaupt : L7Z (1965kw) Burner type: L7Z Version : D Output : 325 - 1965 Kw 27-165 kg/h Year of manufacture : 2010 4. ECOFLAM MAIOR P 60 PR TL (OIL BURNER)-NEW Output : 35-60 (kg/h) 415-710(kw) Ccrv7Crure - Delivery is possible on request - All technical data can be seen in the pictures Preferential sale to dealers, traders or export. All information without guarantee, errors and prior sale reserved. The seller accepts no liability for typing and data transmission errors.

Condition: new, Year of construction: 1988, I sell a new blower, never used Dppvch

Year of construction: 2016, Condition: defective spare-parts repository (used), Machine/vehicle number: 00050, Precision Temperature Control Unit (TCU) - BOFA THE DISPLAY CONTROLLER IS DEFECTIVE! Year of manufacture: November 2016, serial number 00050, excellent condition, the filter is in good shape, electric documentation of the TCU is present, refrigerant gas: R134a 0.75Kg in the system Precision temperature control unit designed for solder paste applications Reverse flow air technology enhances filter performance and increases life Process monitoring via temperature sensors that can be strategically mounted within the printer Precision temperature control unit designed for solder paste applications. The Temperature control unit (TCU) has been designed to meet a very specific process requirement within the electronics sector. The reliable placement of surface mount devices during PCB assembly requires that during the initial printing stage the solder paste is maintained at a temperature that ensures optimum performance. With assembly now on a global basis, the variation of local climate and factory conditions means that this optimum level cannot be maintained without some form of intervention. The design of the TCU includes cooling and heating elements which ensure that the temperature within the printing environment is maintained within 1ºC of the optimum paste performance temperature regardless of whether the factory ambient is above or below this level. Reverse flow air (RFA) technology The RFA technology feature causes a fall in velocity and air direction change. Larger particulate falls out of the airstream into the filter’s drop-out chamber. With less particulate entering the filter media the filter life is significantly increased, enhancing filter capture performance and ensuring longer life. Technical specifications 1. Chiller module B02E8Qwysg 2. Condensate collection container 3. Air outlet 4. Air inlet 5. Castors 6. Service door lock 7. Fail style condensate sensor 8. Four colour beacon mounting plate Technical data: Air delivery system: Re-circulating Temperature range: +/- 8°C from ambient within a programmable range of 19 – 30°C Temperature control: +/- 1°C Cooling capacity: 2000W Temperature sensor: Shared output from integrated printer sensor (0 – 10V input over 0 –50°C) Air in filter: G4 (91% Average Arrestance) EN 779: 2002 Refrigerant gas: R134a 0.75Kg Full load current: 12.6A Start up Current: 20A Frequency: 50 / 60Hz Voltage: 230V +/- 10% (207V – 253V working range) Single Phase Noise Level: higher then 75dBA* Dimensions: 1285mm (H) + (beacon 450mm), 540mm (W), 670mm (D) Condensate: Collected in 5 litre container for disposal or piped to drain Weight: 140Kg Documentation include: Electrical Schematic Sales price: 1.500 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: excellent (used), Year of construction: 2002, Functionality: fully functional, Power: 1,120 kW (1,522.77 HP), Overall weight: 2,500 kg, Pressure: 6 bar, Viessmann VITOPLEX SX1 boiler with WEISHAUPT G30/2A gas burner. Manufacturer: Viessmann VITOPLEX SX1 Year of manufacture: 2002 nominal heat output: 1120Kw boiler water capacity: 1531 liters Max. water pressure in the heating circuit: 6 bar Efficiency: 94% heating circuit water temperature max: 120°C nominal voltage: 230v 50Hz 6A boiler controller: Vitotronic 100 chimney pipe diameter: 300mm Sizes: length: 2540 mm width: 1380-1840mm height: 1900mm weight: approx. 2500 kg Gas burner: Weishaupt G30/2A complete assembly. design: ZR-MN year of manufacture: 2002 heat output: min 300- max 2300kw connection pressure: min 15- max 500 Mbar Nrrn3Ubp gas type: natural gas gas control valve: DUNGS DMV-D 5065/11 pressure switch: Dungs LGW 50 A2P Siemens SQM10.16532 actuator Leakage tester Dungs VPS-504 S04 with stuffing box Tightness checker Dungs VPS-504 S04 Electric power: 6 kw control voltage: 230v 50Hz 1 phase mains voltage: 400v 50Hz 3 phases

Condition: excellent (used), Year of construction: 2014, For sale is a working and very good condition dual fuel burner brand Weshaupt monarch RGL60 ,gas line Dungs DN 100 Weishaupt RGL60 (dual fuel burner) Design : ZMD Output : 800-6900 KW 120 - 580 k/h Set pressure : 30 - 170 mbar - Delivery is possible on request - All technical data can be seen on the pictures Preferential sale to dealers, traders or export. All information without guarantee, errors and prior sale reserved. The seller accepts no liability for typing and data transmission errors. Gyrius Of course we also take care of all formalities.

Year of construction: 2016, Condition: as good as new (ex-display), Machine/vehicle number: 00069, Precision Temperature Control Unit (TCU) - BOFA Year of manufacture: November 2016, serial number 00069, excellent condition, the filter is in good shape, electric documentation of the TCU is present, refrigerant gas: R134a 0.75Kg in the system Precision temperature control unit designed for solder paste applications Reverse flow air technology enhances filter performance and increases life Process monitoring via temperature sensors that can be strategically mounted within the printer Precision temperature control unit designed for solder paste applications. The Temperature control unit (TCU) has been designed to meet a very specific process requirement within the electronics sector. The reliable placement of surface mount devices during PCB assembly requires that during the initial printing stage the solder paste is maintained at a temperature that ensures optimum performance. With assembly now on a global basis, the variation of local climate and factory conditions means that this optimum level cannot be maintained without some form of intervention. The design of the TCU includes cooling and heating elements which ensure that the temperature within the printing environment is maintained within 1ºC of the optimum paste performance temperature regardless of whether the factory ambient is above or below this level. Reverse flow air (RFA) technology The RFA technology feature causes a fall in velocity and air direction change. Larger particulate falls out of the airstream into the filter’s drop-out chamber. With less particulate entering the filter media the filter life is significantly increased, enhancing filter capture performance and ensuring longer life. Technical specifications 1. Chiller module 2. Condensate collection container 3. Air outlet 4. Air inlet 5. Castors 6. Service door lock 7. Fail style condensate sensor 8. Four colour beacon mounting plate Technical data: Air delivery system: Re-circulating Temperature range: +/- 8°C from ambient within a programmable range of 19 – 30°C Temperature control: +/- 1°C Cooling capacity: 2000W Temperature sensor: Shared output from integrated printer sensor (0 – 10V input over 0 –50°C) Air in filter: G4 (91% Average Arrestance) EN 779: 2002 Refrigerant gas: R134a 0.75Kg Full load current: 12.6A Start up Current: 20A Frequency: 50 / 60Hz Voltage: 230V +/- 10% (207V – 253V working range) Single Phase Noise Level: higher then 75dBA* Dimensions: 1285mm (H) + (beacon 450mm), 540mm (W), 670mm (D) Rmns3F9B Condensate: Collected in 5 litre container for disposal or piped to drain Weight: 140Kg Documentation include: Electrical Schematic Sales price: 1.900 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: new, Year of construction: 2007, For sale are working and new/unused/original packaged oil burners of the brand WEISHAUPT RMS9 (3869 Kw) and oil burner SAACKE H40 (3200Kw) (German manufacturer) Type : WEISHAUPT RMS 9 (3689 Kw) - heavy oil new. - Capacity : 80-310 kg/h 950-3689 kw Version : ZMD Year of construction : 2007 - Type : SAACKE H40 heavy fuel new,original packed - Power : 89kg/h-270 kg/h 1059Kw-3200Kw - Version : RIDS - Delivery is possible on request - All technical data can be seen on the pictures Preferential sale to dealers, traders or export. Ewfqbebcs All information without guarantee, errors and prior sale reserved. The seller accepts no liability for typing and data transmission errors.

Year of construction: 2013, Condition: excellent (used), Machine/vehicle number: 181941, Air Delivery System: Re-circulating Temperature range: +/- 8°C from ambient within a programmable range of 19 – 30°C Temperature control: +/- 0.5°C Cooling Capacity: 2000W Temperature Sensor: shared output from integrated printer sensor (0 – 10V input over 0 – 50°C) Pxbwt Air In Filter: G4 (91% Average Arrestance) EN 779: 2002 Refrigerant Gas: R134a 0.75Kg Full load current: 12.6A Start Up Current: 20A Frequency: 50 / 60Hz Voltage: 230V +/- 10% (207V – 253V working range) Single Phase Acoustic Noise: > 75dB Dimensions: 1300mm High (+ beacon), 510mm, 540mm Condensate: Collected in 5 litre container for disposal or piped to drain Weight: 100Kg Documentation not included the TCM is a precision temperature control module designed to enhance the Print Process by providing a highly stable and accurately controlled air temperature within DEK's range of printers. The operating range of the TCM offers wide control of the process s temperature either side of factory ambient. As applications become more varied the requirement to produce high yield results can be aided by the ability to heat as well as cool from factory ambient. Adhesive printing for example benefits from a temperature in the 25-30°C range, which is generally higher than conditioned factory ambient. Conditioned air is fed from the TCM into the print area and returned via ducting located beneath the printer. Ducting design has been formed to achieve minimal airflow rates over the process area prolonging tack performance of solder pastes and increasing stencil life. Due to its optimised design and re-circulating system the TCM is energy efficient and requires minimal input power from a single-phase mains supply. Exhaust air is vented through the top of the TCM alleviating the need for any connection to factory extraction systems. The TCM will automatically shut down following a predetermined delay if the printer is powered down or covers are left open. To monitor process temperature the TCM utilises the output from the printers integrated Temperature Sensor located on the print carriage resulting in accurate feedback and control. To prevent process contamination conditioned air is passed through a filter before entering the printer. The possibility of process contamination is further reduced due to the TCM maintaining a higher air pressure within the printer compared to the surrounding environment thus limiting the ingress of airborne particulates. The Modules operating status is indicated by provision of a 'four colour' beacon clearly visible to line operators. Any condensate produced can be gravity piped to drain or collected in an easy to empty 5-litre container. Two sensors monitor condensate level and give a warning via the beacon when container requires emptying. The TCM will automatically shut down if the container is not emptied to prevent overflow. Sales price: 1900 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten /

Year of construction: 2013, Condition: excellent (used), Machine/vehicle number: 2310-028, Precision Temperature Control Unit (TCU) - BOFA Year of manufacture: November 2013, serial number 2310-028, excellent condition, the filter is in good shape, electric documentation of the TCU is present, refrigerant gas: R134a 0.75Kg in the system Precision temperature control unit designed for solder paste applications Reverse flow air technology enhances filter performance and increases life Process monitoring via temperature sensors that can be strategically mounted within the printer Precision temperature control unit designed for solder paste applications. The Temperature control unit (TCU) has been designed to meet a very specific process requirement within the electronics sector. The reliable placement of surface mount devices during PCB assembly requires that during the initial printing stage the solder paste is maintained at a temperature that ensures optimum performance. With assembly now on a global basis, the variation of local climate and factory conditions means that this optimum level cannot be maintained without some form of intervention. The design of the TCU includes cooling and heating elements which ensure that the temperature within the printing environment is maintained within 1ºC of the optimum paste performance temperature regardless of whether the factory ambient is above or below this level. Reverse flow air (RFA) technology The RFA technology feature causes a fall in velocity and air direction change. Larger particulate falls out of the airstream into the filter’s drop-out chamber. With less particulate entering the filter media the filter life is significantly increased, enhancing filter capture performance and ensuring longer life. Technical specifications 1. Chiller module 2. Condensate collection container 3. Air outlet 4. Air inlet 5. Castors 6. Service door lock 7. Fail style condensate sensor 8. Four colour beacon mounting plate Technical data: Air delivery system: Re-circulating Temperature range: +/- 8°C from ambient within a programmable range of 19 – 30°C Temperature control: +/- 1°C Cooling capacity: 2000W Temperature sensor: Shared output from integrated printer sensor (0 – 10V input over 0 –50°C) Air in filter: G4 (91% Average Arrestance) EN 779: 2002 Refrigerant gas: R134a 0.75Kg Full load current: 12.6A Start up Current: 20A Frequency: 50 / 60Hz Voltage: 230V +/- 10% (207V – 253V working range) Single Phase Noise Level: higher then 75dBA* Dimensions: 1285mm (H) + (beacon 450mm), 540mm (W), 670mm (D) Condensate: Collected in 5 litre container for disposal or piped to drain Weight: 140Kg Documentation include: Electrical Schematic Egiobxuuo Sales price: 1900 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana