Used heat exchanger for sale (39)

Condition: used, Item: D4313-Alfa Exchanger Alfa Laval Plate heat exchanger, Type MF6-TF II Iaedoviu Atspfx Abcop Volume 7.8 L Max. Working temperature 135 C Working pressure 5 bar

Year of construction: 2014, condition: ready for operation (used), Two identical air-cooled recoolers Güntner are available. Temperature min./max.: -30°C/50°C, max. operating pressure at 100°C: 32bar, max. operating pressure at -5°C to 40°C: -1bar, test pressure: 35.2bar, volume: 19l, PED category: III, fluid group: 1. Documentation available. An on-site inspection is possible. Ijdpfx Abjyuglnocoap

Year of construction: 2011, condition: used, functionality: fully functional, A complete cooling water unit that was used for cooling screw compressors. 1x pump unit with machine frame consisting of: 3x Grundfos stainless steel centrifugal pump Type: CRN32-1-1 A-F-G-V-HQQV Flow rate per pump: 30 m³/h Delivery head: 10.7 meters (1.05 bar) Drive power: 1.5 kW Voltage / Frequency: 400 Volt / 50 Hertz 6x manual shut-off butterfly valves, stainless steel material 1x pressure relief valve 2x pressure transmitters 6x pressure gauges 2x plastic piping with bends, 140 x 8.3 mm Gerodur 1x heat exchanger unit with frame consisting of: 2x bolted plate heat exchangers Alfa Laval Type: M6-MFG Capacity: 11.2 liters Operating pressure max.: 10 bar Max. temperature: 80°C 6x manual shut-off butterfly valves, stainless steel Iaodpfxjyrxuvj Abcjp 2x electric valves with Auma electric actuators with Harting plug connector 2x electric valves KSB with Auma actuator SAR 07.1-F10 and MATIC control head with Harting plug connector 2x PT 100 thermometers 2x PE pipes with bends 110 x 6.5 mm Gerodur 2x PE pipes with bends 90 x 5.4 mm Gerodur 1x expansion vessel

Condition: used, Plate Heat Exchanger,Heat Exchanger, SPX 034.MGS.10.1, Used machine Manufacturer : SPX Year : 2012 Overall dimensions : 450 x 610 x 1360 mm Heat transfer area : 18.93 m² Iaedsx Ttu Ijpfx Abcop Operating pressure : 10 bar

Year of construction: 2008, condition: excellent (used), Plate heat exchanger APV H17 7.41 4.8nm2 800kw APV H17 MGJ plate heat exchanger /ct2227/ Manufacturer: APV Type: H17 MGJ 10.1 Year of manufacture: 2008 Heat transfer surface: 4.08nm3 Nominal power: 800kw Width: 340mm Height: 1050mm Connection height: 137mm Depth: 60cm Pipe connection DN50,EN 1092 Capacity: Primary: 7.41Liter Secondary: 6.86 Max pressure: 10bar Test pressure 15.53 bar Iaedjwx Hz Sjpfx Abcop Max temperature: 110 °C Stainless steel pipe connections.

Condition: new, Year of construction: 2022, functionality: fully functional, Item: A-Aalborg-Micro AALBORG MICRO The Aalborg Micro is a compact exhaust gas heat exchanger/steam generator, designed for waste heat recovery from gas/MDO/HFO engines and gas turbines. As a heat exchanger, the Aalborg Micro offers a wide range of opportunities, due to the fact that hot water, TEG and TFO can all be used as media. Furthermore the Aalborg Micro can be used as a steam generator. A cylindrical unit in the center with an integrated regulation damper allows up to 80% of the exhaust gas to bypass the heating surface. Iajdpjqy Nv Rsfx Abcop The heating surface can be cleaned easily via optional soot blower rings using compressed air/steam/water, and/or by a pyrolysis process in dry-run mode

Year of construction: 2021, condition: ready for operation (used), The device is the standing variation, heating surface: 34m³, power: 2000kW, pressure: 12.7-14.3bar, diameter: 505mm, length: 4590mm, weight: 650kg, with documentation, the countercurrent device was in use for just one winter. Ijdpoi Dx R Tjfx Abcsap

Year of construction: 2008, condition: good (used), Item: D-7802-APV-Heat Exchanger Stainless Steel Heat Exchanger Type APV H17, Temperature max. 110 C From 2008. Iasdjf Srmzepfx Abcsp Nominal Capacity: 20,5 kW Transmission: 2,7 m2 Press: 4,5 Bar

Year of construction: 2019, condition: ready for operation (used), There is a recirculating air cooling system consisting of an Alfa Laval plate heat exchanger and a Thermofin finned tube heat exchanger. 1) Alfa Laval M10-BW plate heat exchanger, year of manufacture: 2005, cooling capacity: 115kW, flow rate: 28.2m³/h, refrigerant NH3. 2) Finned tube heat exchanger Thermofin TBN, year of manufacture: 2019. Including panel housing and condensate drip tray. Documentation available. Isdpjt R Tr Sofx Abcjap

Year of construction: 1989, condition: ready for operation (used), Max. Operating pressure: 20 bar, max. temperature range: 120°C. Iasdpfotphubex Abcjp

Year of construction: 1986, condition: ready for operation (used), A plate heat exchanger WMW is available. Heating medium: steam, cooling fluid: water, temperature range: 15°C-90°C, flow rate: 2000l/h, steam quantity: 300kg/h, weight: approx. 355kg. An on-site inspection is possible. Iaodpfx Abex Syv Nscjp

Condition: used, Standard coolers, car coolers, oil coolers, heat exchangers -Oil cooler -Cooler area: 300 x 300 mm -with: fan Iajdpfx Aedkx Sysbcop -Dimensions: 300/160/H360 mm -Weight: 9 kg

Condition: used, Standard coolers, car coolers, oil coolers, heat exchangers -Oil cooler -Max. Operating pressure: bar -Temperature range: up to 120 °C -without fan -Dimensions: 420/120/H650 mm -Weight: 32 kg Iedpfx Aocx T E Iobcjap

Condition: good (used), Heat exchanger, cooling coil, cooling pipe, cooling spiral, shell and tube heat exchanger, seawater heat exchanger -Manufacturer: Funke, heat exchanger shell and tube heat exchanger -Type: BOF 807-0-4 -Contents: Jacket space bronze 35.6 l / Tube space copper 15.3 l -Operating pressure: max. 16 / 10 bar -Dimensions: 2480/360/H350 mm -Weight: 236 kg Ijdpfx Aewu S Tfobcoap

Condition: good (used), Standard Radiator, Car Radiator, Oil Cooler, Heat Exchanger Iasdei En Dqepfx Abcop -Manufacturer: Longer Reich, light metal oil cooler cooler -Type: unfortunately no type designation -Motor: Siemens 0.37 kW -Pressure: max. 16 bar -Temperature: max. 120 °C -Dimensions: 560/330/H540 mm -Weight: 28 kg

Condition: good (used), standard cooler, car cooler, oil cooler, heat exchanger, hydraulic oil cooler, engine cooler, water cooler, standard cooler -Manufacturer: Nissens, cooler aluminum housing -Type: unfortunately no type designation -Number: 2x coolers available -Price: per piece -Dimensions: 675/110/H285 mm / 700/110/H290 mm -Weight: 7.5 kg / 7.7 kg Iodpjmhmxuefx Abcjap

Year of construction: 2018, condition: good (used), Heat exchanger, cooling coil, cooling pipe, cooling spiral, shell and tube heat exchanger, oil cooler -Manufacturer: Jiangsu, heat exchanger type SL-421 -Pump: Aulank CPS-20 1.5 kW Iodpfx Abexl R Rnecoap -Flow rate: 180 l/min -Container: Material stainless steel, with level indicator -Transport dimensions: 1180/780/H760 mm -Weight: 80 kg

Condition: good (used), Heat exchanger, cooling coil, cooling pipe, cooling spiral, shell and tube heat exchanger, seawater heat exchanger -Manufacturer: Funke, heat exchanger shell and tube heat exchanger -Type: BOF 806-0-4 -Contents: Jacket space 50.7 l / Tube space 22.0 l -Operating pressure: max. 16 / 10 bar -Dimensions: 2120/285/H305 mm -Weight: 146 kg Iaodpfx Abowu S Rqscop

Year of construction: 1984, condition: used, Chiller, cooling water circuit, heat exchanger, cooling for spot welding equipment, spot welding machine, spot welding system, spot welding gun -mobile version: -Connection: 1/2 "inch -Cooling unit output: 0.33 kW Isdpjdz Aq Uofx Abcoap -Water volume flow: 500 l / h -Dimensions: 895/600 / H1020 mm -Weight: 156 kg

Condition: good (used), Heat exchanger, cooling coil, cooling pipe, cooling spiral -Heat exchanger: cooling coil with fins -Dimensions: see photos -Material: aluminum Iaodpfx Asikgd Hsbcep -Transport dimensions: Ø65 x 365 mm -Weight: 0.5 kg

Year of construction: 1993, condition: good (used), Standard cooler, car cooler, oil cooler, heat exchanger, compressor cooler, hydraulic oil cooler -Manufacturer: AKG, light metal oil/air cooler with filter Isdpfx Aov E D U Robceap -Type: 5.1074.4 1109.069.0000 -Pressure: max. 15 bar -Dimensions: 1090/420/H715 mm -Weight: 61 kg

Year of construction: 1990, condition: good (used), Heat exchanger, cooling coil, cooling pipe, cooling spiral, shell and tube heat exchanger -Manufacturer: Bloksma, heat exchanger shell and tube heat exchanger -Type: B13-2Z-04 B13-3H7-15D Ijdpfxowu Tk Se Abcoap -Operating pressure: 6.5 / 3.5 bar -Dimensions: 2235/340/H155 mm -Weight: 61 kg

Year of construction: 1990, condition: good (used), standard cooler, car cooler, oil cooler, heat exchanger -Manufacturer: AKG, light metal oil/air cooler from screw compressor Boge VLED 30R-11A -Type: 0720.067.000 -Pressure: max. 15 bar -Dimensions: 650/360/H550 mm -Weight: 40 kg Iodpevcxzajfx Abcoap

Condition: new, machine/vehicle number: WKA 10+, Air conditioning units from cleanroom plastic medical technology. 3 brand new units. Were kept as spare devices in the maintenance warehouse. Ijdpfxsxau U To Abcoap

Condition: excellent (used), Year of construction: 2001, Tetra Pak Spiraflow MT57 Year of Manufacture: 2001 Iedeygwymjpfx Abcjap Excellent condition. For more detailed information about the MT75 model, see the attached PDF. General heating and cooling duties, heat recovery, pasteurisation, and UHT treatment. Hygienic design, suitable for processing food products. The Tetra Spiraflo MT heat exchangers are especially recommended for multi-purpose UHT plants processing free-flowing, viscous, and particulate products.