Imagesetter

AGFA AccuSet 1000 & PDF-Rip

Year of construction: 2012, condition: excellent (used), Agfa C95 washout station -good condition Iaodpjirnmcofx An Djr

Condition: used, Year of construction: 1985, impressions 76 Mio. max. printing speed sheets 8000 /h max. paper size 36 x 52 cm Iajdpfx Ajykb Hxjn Dor numbering unit include N+P dampening system Varn Kompac

Condition: ready for operation (used), Year of construction: 2014, Printing technology: piezo DOD printheads: Xaar 1001, resolution: 720x360dpi, drying: 1xUV GOZ and 1xUV FOZ Höhnle with 7,2kW, pinning system (LED) after printing unit 1+5, extraction: in the drying unit for cooling the UV lamps and for odor minimization and improvement of sensory conditions, inert gas system: oxygen-reduced curing unit (inert gas system), consumption: under 6m³/h, printing: roll-to-roll, web width: 350mm, print width: 330mm, repeat length: min./max. printable section length 10-1000mm, print tolerance: single spacing +/-0,2mm, cumulative spacing: +/-1,5mm (over one meter), register: register accuracy +/-50μm, max. speed: 48m/min with 4 colors depending on ink coverage, white at 30m/min, speed must be preselected from 18 to 48m/min, print pre-treatment: corona with 1500VA, web cleaning: polymer rollers LC 350, air shafts: for cores with 76mm diameter for unwinding and rewinding, air shaft clamping pneumatic, clamping releasable to allow rotation of the winding mandrel, max. roll diameter for unwinding and rewinding: 610mm, max. roll weight for unwinding and rewinding: 120kg. power consumption: approx. 39kVA/60A, air consumption: 100NL/min, cooling capacity: approx. 60.000BTU/h =18kW, data interface: USB2.0, Ethernet, data format: PDF-X1 or X3 or EPS or AI, length: 4550mm, width: 1750mm, height: 2200mm, weight: approx. 3t. With documentation, chiller unit and inks. The machine is fault-free, complete and ready for operation, and has been serviced regularly. On-site inspection is possible. Iedoxz Ewnepfx An Dsar

Condition: new, *TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Load circuits: 1 or 2 as standard Temperature range: - 45°C to +130°C Medium: water / glycol mixture Dimensions LxWxH (without connections) : 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300kg 2-circuit: approx. 1500kg *HIGHLIGHTS EQUIPMENT: -Controls: Temperature control (standard) -Control via SPS with touch screen -Analogue and digital interfaces -Internal 2-circuit pump system (INFO: Ensures performance values even at low flow rates) -Heating control via solid-state relay (SSR) -Flow measurement in the internal circuit for flow monitoring (INFO: If the water/glycol mixture is incorrect, the system automatically warns and switches off in the next step) -Pressure-controlled cooling water regulator (INFO: Much more accurate than temperature controls) Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metal) (non-ferrous metal-free optional) All medium-carrying components and piping insulated for low-temperature application -Water-cooled condenser (air-cooled on request). *OPTIONS: -flow rate control: up to 100l/min, >4 l/min +/- 5% of measured value -Pressure control: 0.5 to 4.5 bar (control range) -compressed air monitoring -test piece emptying by means of compressed air - Cooling water monitoring -Limitation of inlet pressure Iaodpfx Ajg Ezarsn Der -Other special options available on request and after technical inspection Visit our website for more details or for other performance classes. *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 30996 B, MAN ROLAND R906-6 LTTL Year 2004 Machine no. 30996 B Total impressions: approx. 405 million Sheet-fed offset press – 6 printing units + 2 varnish coating units + 2 tower dryer units 5 units with conventional inking rollers + 1 unit with hybrid rollers High-pile feeder and extended delivery Technical specifications: - Printing speed: 13,000 sheets/h - Max. sheet size: 1020 x 1420 mm - Min. sheet size: 600 x 850 mm - Stock thickness: 0.2–1 mm - Max. print area: 990 x 1400 mm Iaedpsygdl Nefx An Djr - Plate size: 1165 x 1430 mm; plate thickness: 0.30 mm - Blanket size: 0000 x 0000 mm; blanket thickness: 1.90 mm - Dimensions (L x W x H): approx. 25.00 x 4.70 x 2.70 m - Power requirement: approx. 00 kW - Weight: approx. 140,000 kg Accessories and features included: - Non-stop feeder - Steel feed table - Stream feeder with vacuum belt - Preset system (automatic paper size and thickness adjustment) - Electronic double sheet detection - Electromechanical double sheet detection - Electronic side lay control (photoelectric and acoustic) - Antistatic devices at feeder and delivery - RCI machine control and diagnostics via monitor console: self-diagnosis, control and monitor console; remote ink and dampening control; axial, circumferential and diagonal register control with light pen; daylight lamp and memory card for job storage - Multi CCI 2D quality control - APL™ fully automatic plate changer - Remote-controlled circumferential, lateral and diagonal register - Rolandmatic continuous dampening system with alcohol dosing, cooling and Technotrans Beta D recirculation unit - Ink temperature control - Programmable automatic blanket wash - Programmable automatic roller wash - 570 mm raised height - Chromed cylinders - AIRGLIDE sheet transport - Anilox UV coating unit with varnish pump - 2 hot air drying towers between coating units - Anilox conventional coating unit with varnish pump - Automatic sheet de-curler - Grafix Cantronic 3000 powder spray - IR ELTOSCH dryer - UV ELTOSCH dryer with 3 lamps - Extended delivery - Steel delivery table - Non-stop feeder - Tools, documentation - Supplied with all standard parts and accessories Availability: Immediate Condition: Good working order, no damage to cylinders or gears Inspection: Machine is in production, test runs possible Video available

Condition: new, functionality: fully functional, Year of construction: 2026, control type: manual, degree of automation: manual, actuation type: manual, bending angle (max.): 130 °, overall weight: 430 kg, warranty duration: 24 months, Sheet Metal Bending Machine / Brake - Bender 3100mm - RG-C 3007 + Cutter RC-0.8 3-Meter Sheet Metal Bender – Professional Solution for Roofing contractors Our 3-meter sheet metal bender is a high-quality machine designed for roofing contractors and companies specializing in sheet metal processing who value precision, durability, and ergonomic operation. With its robust construction and precise craftsmanship, it ensures reliability and ease of use even under intensive working conditions. Key Features: ✅ Working length: 3 meters – allows bending of large metal sheets, increasing work efficiency. ✅ Sturdy steel construction – guarantees longevity and resistance to deformation. ✅ Precision bending – perfect for producing roofing elements, sheet metal trims, and gutters. ✅ Easy operation – an intuitive control mechanism enables quick and accurate sheet shaping. ✅ High clamping force – stabilizes the material, ensuring uniform bending along the entire length. Our 3-meter sheet metal bender is an indispensable tool on any construction site, improving the quality and efficiency of roofing work. 3-Meter Sheet Metal Bender – Technical Specifications Maximum bending length: 3100 mm / 122" Maximum bending capacity: Steel sheet: up to 0.7 mm Aluminum sheet: up to 1.0 mm Copper and zinc sheet: up to 1.0 mm Maximum bending angle: 130° Bending beam thickness: 30 mm Maximum clamping beam lift height: 80 mm Overall dimensions: 3460 x 900 x 1200 mm Weight: Approx. 450 kg (varies depending on configuration) Clamping system: Manual with high clamping force for stable operation Construction: Heavy-duty steel frame ensuring durability and precision Accessories (included): Back support arms for large sheets Functional protractor for precise angle bending Isdpfev Ax N Djx An Djar Roller cutter / shear - for quick and precise cutting of sheet metal along the working length of the bending machine Optional accessories (not included): Swivel castors with brake - (4 pcs.) - €160.00 This 3-meter sheet metal bender offers precision, durability, and ease of use, making it an ideal choice for roofers and professionals who demand reliable performance in sheet metal forming. Contact us for more information and to find the perfect model for your needs! FREE SHIPPING TO GERMANY. Shipping costs to other countries on request.

Condition: used, AGFA APIS-Board Rev. 'B2'. For all AccuSets (800/1000/1500 normal & plus) and all Avantras (20/25/30/36/44 - E/S/XT) Iajdpfebrtd Uox An Der

Condition: used, Powersupply for AccuSet - see all details in the picture. The Powersupply is tested and checked - 2024 in Germany. Iaedjbrtnxjpfx An Dor

Condition: ready for operation (used), Year of construction: 1967, machine/vehicle number: No.1469/77, functionality: fully functional, mold height (min.): 2,356 mm, Gietz - Pull Press / Luxury Model Manufactured in the 1960s in Switzerland, printing format 52 x 68 cm. Iodpfjx A Eaxjx An Doar A beautiful, handy, and solid specimen. Technically flawless and ready for operation – the ideal printing press for museums, schools, workshops, and dedicated hobby artists looking for an authentic, long-lasting work tool. Previously located in the studio of the Gutenberg Museum in Fribourg, Switzerland. The machine can be used for a wide range of applications, including letterpress printing with lead or wooden type, woodcuts, linocuts, blind embossing, die cutting, and much more. Dimensions: L=198cm / W=100cm / H=109cm / Weight approx. 250 to 300Kg.

Year of construction: 2013, condition: excellent (used), functionality: fully functional, 2013 Maximum width: 370 mm 10 colors Rail Combo laminator on rail Web turn bar Chilled drums Chiller 2 die-cutting stations 5 x Hot Air dryers Tooling Iedpfx Aow Sw Rpjn Dear