PRODUCT HIGHLIGHTS
2400 x 1200 dpi
Media up to 31.4 mil Thick
Borderless, Roll Printing up to 60" Wide
Ethernet
640 MB Internal Memory
Embedded 250 GB Hard Drive
Replace Ink Cartridges During Printing
Photoshop, DPP, MS Office Print Plug-ins
Printing Method
Printing Technology Inkjet printer with non-firing nozzle detection and compensation
Maximum Resolution 2400 x 1200 dpi
Minimum Ink Droplet Size 4.0 pl
Ink Type LUCIA EX Ink (Pigment based)
Ink Palette Cyan, Photo Cyan, Magenta, Photo Mag...
4
Dimensions: approx. (W) 500 x (D) 600 x (H) 530 mm
Ekfnxnp
General Data
Measurements width 355.6 MM
Measurements depth 304.8 MM
Measurements height 304.8 MM
Media
Main electronic connection 120/208 V 50/60 HZ
Additional Equipment
1 DB T12/ T12SR100 SET
1 DB T16/ T12SR100 SET
3 DB T16/ T12SR30 SET
3 DB T12/ T12SR30 SET
This Stratasys Fortus 380mc 3D printer was made in the United States in 2018. It has an envelope size 355.6 x 304.8 x 304.8 mm. This machine works through a touchscreen graphical user interface in its computer workstation. It includes...
Laser printer for plastics FARSOON eForm 3D built in 2017. The printer is offered with complete equipment for preparing powder and cleaning prints. The equipment was used to a small extent for about 12 months, it worked for about 2000 hours. The device operated in a gas shield from a cylinder.
Complete with printer: 8 nitrogen regulators.
Technical data of the FARSOON eForm 3D printer:
- open control software: any modification of printing parameters
- laser type: CO₂
- laser power: 30 W
- dime...
Type: 3D Printer
Process: SLA (stereolithography) 405nm violet laser 250mW
dimensions: 350x330x520mm
Print volume: 145x145x175mm
Connections: WiFi, WLan, USB
Operating hours: approx. 400h
Year of manufacture: 2018
Accessories:
Wash & Cure Set
Sink 2-fold
9 Resin Tank
9 partly opened resin cartridges, various materials
Bymoxd2p3n
Hand tools
The configuration is:
1 Printer HP 4200
1 Processing Station HP 4200
2 Build unit HP 4200
Print Volume 380mm x 284mm x 380mm
Full Job completed in 12 hours 380mm in 12 ore
layer thickness 0.08 mm (0.003 in)
Bwk9lo28vr
Print resolution xy 1200 dpi
Printer dimension 2210 x 1200 x 1448 mm (87 x 47 x 57 in)
Processing Station Dimensions
Energy Consumption: 9 -11 kW
Summa invented contour cutting in 1993. Since then, the technology has literally transformed the industry and become the single most important feature in vinyl cutting.
OPOS-CAM™ represents the fourth generation evolution of Summa's revolutionary OPOS contour cutting alignment system – a factory upgrade option now available on all new Summa S2 T75, S2 T140 and S2 T160 contour cutting plotters.
Precision-engineered to increase workflow efficiency when contour cutting printed graphics, signs, la...
15
incl. Thermo Chiller HRS050-AN-20, recycling station with dedusting system, unpacking station model BOS 230, mixing system
Mwoxi0
General Data
Measurements width 1530 mm
Measurements depth 1170 mm
Measurements height 2210 mm
Machine weight 600 kg
Bvqgujzbc2
This Stratasys Fortus 380MC 3D printer was manufactured in 2016. It has a maximum print range 305 x 355 x 305 mm, and a print speed 200 mm/s. It is in very good conditions, it has been regularly serviced.
Application Types
3DPrinting
Offer a fully functional HP-MJF 580 3D printing machine. For more info's please contact us.
Dur8ipzd
We sell our 3D printer ProJet CJP 660Pro from 3D SYSTEMS,
with a few hours of operation.
The printer is in very good condition and has been serviced annually.
Here are the technical data and advantages of the device:
Applications:
Conceptual models
Communication, sales & marketing models
Fast design iteration
Models of works of art
Simulation models
Surgical Practices
FEA analysis
Assembly visualization
ergonomics
Validation of colors and textures
Advantages:
Professional 3D full-color prin...
Here we offer you an Objet Stratasys 3D printer.
The Objet Connex 500 is the pioneering multi-material 3D printer from Objet.
With a large footprint of 500 x 400 x 200 mm, designers and engineers can quickly prototype,
to more closely simulate the intended end product than any other technology.
What is unique about the Objet Connex?
B7hmpjt8
With Objet's patented simultaneous multi-material molding technology, the Objet Connex 500 can produce
print models from up to 14 different materials in a s...
The BCN3D Ignis V2017 has been designed to approach the laser technology manufacturing to the society, as well as offering a competitive solution to the industry, with the best quality-price ratio on the market. Designed and manufactured in Barcelona with the aim of offering an equipment with a high level performance in a Class I secure environment . The BCN3D Ignis is powered by a 100W CO2 laser which allows to cut, mark and engrave on a wide range of materials including wood, plastic (acrylic)...
15
incl. Industrial Chiller S&A CW-6000AN
B2p82rlqu
Media
Main electronic connection 230 V
Additional Equipment
Russel Sieve Machine
RUWAC Wet Separator (Vacuum)
Nabertherm Furnace
This RENISHAW AM 250 3D printer was built in 2013 in United Kingdom. This machine has very low usage hours and comes with a Russel Sieve Machine, a RUWAC Wet Separator (Vacuum) and a Nabertherm Furnace. It is designed for the production of medium size components with high precision and surface quality. Renishaw’s AM250 metal additive manufacturing system uses metal...
PRICE IS FOR BOTH UNITS TOGETHER
Pey32
CMET Rapid Meister ATOMm-8000
Large scale 3D printer (SLA resin) -- TWO units, selling together
Made in Japan
Purchased summer 2018, use ~15 hrs/week, approx. 1500 hrs
Max. build size W600×D800×H400mm
External dimension W1900×D1190×H2170mm
Includes
Power transformer (110V-220V) (x2)
Large UV curing oven (x1)
Large ultrasonic cleaning bath (x1)
Machines located in Lai Chi Kok, Kowloon, Hong Kong
Price negotiable and inspections welcomed
See attached do...
Stratasys f170 on sale, it was bought new one year ago. Only 300h working hours, like new. Everything included like with new printer+additional new head for ABS/ASA. Also, we add some partly used spools of filament.The machine is located in Slovenia, Europe. The original palette is available.
Bv7y0okrxy
We offer our EOSINT P395 for sale. Printer has very little hours (
Briqlt0f3
MODEL MDX-540 MDX-540S
Usable Materials Plastic, resin, wood and non-ferrous metals
XYZ-Axis Travel 19.6(X) x 15.7(Y) x 6.1"(Z)[500 (X) x 400 (Y) x 155 mm (Z)]
Loadable workpiece size with optional rotary axis (ZCL-540) * 7.0” Diameter x 14.6” Length [177.8mm Diameter x 370.8mm Length]
Ckurkun8
Actual milling area is smaller
Distance From Spindle Nose to Table Maximum 10" (254mm)
Table Size 21.7(W) x 16.5"(D) [550(W) x 420mm (D)]
Loadable workpiece weight At acceleration of 0.2G: maximum 26lb (...
15
incl. Industrial Chiller S&A CW-6000AN
Bynxinjzyo
General Data
Measurements width 1530 mm
Measurements depth 1170 mm
Measurements height 2210 mm
Machine weight 601 kg
Media
Power consumption 2250 W
Additional Equipment
suitable cleaning basin with heating and circulation for supporting contour removal
This Stratasys Fortus 380MC 3D printer was manufactured in 2015. It has a current INTEL processor. Its screen resolution is 1280 x 1024 mm. The printer has a hard disk with a virtual main memory of at least 1 GB.
Pgmgx
Application Types
3DPrin...
The INDUSTRY F420 can reliably print 24/7 with minimal human input. The 3D printing experience is self-contained in an actively heated build chamber, so you can rely on it to create parts and models that are true to design.
With 1 m/s of travel speed and a print speed of up to 400 mm/s, the INDUSTRY F420 delivers a fast printing experience too. The extrusion system is designed to speed up build time beyond that which a normal printer can.
Other features include a dual-function print bed with a...
EOS P360 plastic laser-sintering system with upgrade
The plant consists of:
1x Laser Firestar ti100-hs
Termotek laser cooling
Control = PSW 3.3 Open Source
Mini PC with Windows 10 (upgrade)
1x High-Speed-Scanner incl. Varioscan (Upgrade)
8-Zone-Heating (Upgrade)
Ionization (Upgrade)
Transitube
Stripping station with automatic powder return (Upgrade)
Trolley
Second exchange frame
Sale ex location
Condition: good / used
Scope of delivery: (See pictures)
(Changes and errors in the technical data, s...
Stratasys 3D Printer Dimension
Here we offer you a Stratasys 3D Printer Dimension.
Stratasys Dimension 3D Printer
Bj3wniiou
The Dimension 3D printer is part of the Design Series from Stratasys.
Manufacturer: Stratasys
Type / Printing Technology: FDM (Fused Deposition Modeling)
Build volume: 20.3 x 20.3 x 30.5 cm
Printable material / filaments: original ABSplus spools or also other ABS or Hips foreign material
Dimensions and weight: 68.6 x 91.4 x 104.1 cm; 127 kg
Build platform: plastic; reusable...
We offer a 1 year old machine with 60h operating hours and still a maintenance at Keyence in the service package. LP over 60.000€ purchase price 50.000€
Ca83tog9
We have SLS, FDM, SLA and Inkjet in house. Installation as well as the software and a briefing is naturally included. The printer runs without problems and does what it should.
ATMAT Signal Pro 500 V2 3D Printer
Industrial 3D printer with a connectable print room.
The device is in a good and functional condition from the year of manufacture 2019. The device was previously overhauled by the manufacturer and updated to the current software version.
The device is located near Göttingen to pick up, alternatively, the printer can be shipped by freight forwarding.
The printer has approx. 300-430 operating hours and has just been serviced.
To scope of supply still belongs a G...
Additional Equipment
1x stainless steel washout unit UW20
This Stratasys F370 3D printer was built in 2017. It has a record of 13400 operating hours. This machine performs with a FDM technology. It works with a build volume 356 x 254 x 356 mm. This 3D printer includes 1 stainless steel washout unit UW20.
Application Types
H2nko3l
3DPrinting
Professional 3D printer ready to use with no work to do, available for any test. The printer works perfectly and has few hours of work.
Print any piece with repeatability, sotware of extreme ease of use.
It is visible and testable at our headquarters.
Print area mm 203x203x305.
Very resistant ABS material, easily sandable and paintable.
Layer thickness mm 0,178 or 0,254 configurable through software.
The printer works with easily removable media.
Sale includes:
- Stratasys Dimension Elite 3d pri...
In this offer you acquire a used 3D printer "Stratasys Eden 260VS ".
Item for sale:
Bia9mtv33j
1 x Stratasys Eden260VS with the following equipment:
incl.CleanStation Super DT3
incl.RIP
Condition:
This is a used machine, which may show signs of use (minor scratches or yellowing).
(minor scratches or yellowing).
The unit has been tested for function
A test printout can be seen in the photo.
03.2020 a new print head was installed by a technician.
For more information...
ProJet 3000 HD 3D Printer
Here we offer you an untested ProJet 3D Printer.
The ProJetTM HD 3000 prints precise plastic parts for use in functional testing, communication models, rapid manufacturing, rapid tooling and more.
With features such as a wide material selection, multiple resolution modes and ease of use, this office-friendly 3D printer accelerates and maximizes your return on investment (ROI).
Print Modes HD - High Definition
UHD - Ultra High Definition
Net build volume (xyz)
HD Mode 29...
3D Printer 3DGENCE Industry F340
3D Printing Technology FFF Fused Filament Fabrication
Installation space 260x300x340 mm
Layer resolution 150, 250 micrometer
Extruder type 2 (dual)
Tool change (speed) 700 ms
Print speed max. 100 mm/s
die diameter 0,4/0,4 mm
minimum wall thickness 0.4 mm
filament diameter 1,75 mm
Material ABS, HIPS, PET, PC, PC-ABS, PC-ESD, PEEK
Extruder temperature 275-500 °C
Heating bed temperature 140-160 °C
Buj03gk8hg
Filament chamber heating 85 °C
Filament chamber heating 70...
ATMAT Signal Pro 300 V2 3D Printer
Industrial 3D printer with a connectable print room.
The device is in a good and functional condition from the year of manufacture 2019. The device was previously overhauled by the manufacturer and updated to the current software version.
Jfnxq2i
The device is located near Göttingen to pick up, alternatively, the printer can be shipped by freight forwarding.
The printer has approx. 300-430 operating hours and has just been serviced.
To scope of supply still ...
General Data
Measurements width 1140 mm
Measurements depth 740 mm
Measurements height 1725 mm
Media
Main electronic connection 220-240 V / 50-60 Hz
Power consumption 3000 W
This Dynamical DTLITE 3D Printer was manufactured in the year 2019. It has been working less than 500 hours. This machine can works with a 600 x 450 x 450 mm print sizes, a double-head and with different materials. It includes an extra tempered glass bed and 3 extruders as new.
Application Types
Bw77oqutti
3DPrinting
It is an industrial printer of the brand Stratasys (model 450mc with full equipment).
the 3D printer Fortus 450mc from Stratasys.
Smywjax
It can be inspected under power.
Year of manufacture 2018, commissioning June 2019
last serviced April 2020
Operating hours approx. 2.000,-
n this offer you acquire a used RealWax 3D printer from 3D Systems "ProJet® 3500 CPXMax".
Item for sale:
1 x ProJet® 3500 CPXMax with the following equipment: -incl. Projet Finisher melt-out oven
Build Hours: approx. 1.178 hrs*
Condition:
This is a used machine and may show signs of use (minor scratches or yellowing).
(minor scratches or yellowing). -The unit has been tested for function
-A test printout can be seen in the photo
-Sold as seen in the photos
Ewimku9oi
-The 3D printer ...
A 3D printer from the Austrian manufacturer EVO-tech GmbH
EVO-lizer EL-11
-Building space 240 x 200 x 205 mm
-activated carbon filter
-closed tempered construction space
-recirculating ball screws
-2 extruders
-vibration damped suspension
-7" touch display
-LAN/WLAN
-cell phone web app
Accessories:
-1KG ABS Black
-1KG SUPP (Support Material)
-1pc. Carbon pressure plate
-Tool set
-Simplify 3D Software (not included)
-EVO-tech folder incl. manual
EL-11 consumable kit:
-additional printing plate
-f...
Worked very little only in 2019,
Bv28qqyzqd
Includes a cleaning station.
Worldwide delivery in sales price.
Currently dismantled, ready for shipment.
We are open to offers.
Renishaw-AM250
Iqz990kha
Renishaw’s AM250 metal additive manufacturing system uses metal powder bed fusion to build complex components direct from 3D computer generated (CAD) designs.
This AM250 has very low usage hours and comes with a Russel Sieve Machine, RUWAC Wet Separator (Vacuum) and Nabertherm Furnace.
Available for immediate sale and delivery.
Specifications
Year: 2013
Price: £112,500
Main Options
Renishaw AM250
Additional Options
Russel Sieve Machine - MS400
RUWAC Wet Separator (Vac...
Print Volume: 332 x 190 x 248 mm
Super FAST: Full job at 248 mm printed in just 18 Hours
Layer thickness: 0.08 mm
Print resolution xy: 1200 dpi
Weight and Printer Dimensions: 650 kg, 1565 x 955 x 1505 mm
Energy Consumption 4.5-6.3kW
Resistant and Functional parts (PA12 Nylon) in full color, with voxel control
Touch display and control panel easy to use
CMYK color system at 1200 dpi resolution
Bkzopph
Automated and closed mixing and loading systems
Ideal for Small&Medium productions, R&D teams ...
Unused Professional 3D printer.
Bezg89mcwz
Option to reactivate Warranty at local Stratasys reseller.
EXW shipping terms
For sale is a ProJet 5500 X
Bucp7cjg0y
incl. software licenses
incl. build platforms
Offer on request
MerkmaleFarbe: 180000 Farben (2 Druckköpfe: klar und CMY)Mindestgröße der Merkmale: 0,006 Zoll (0,15 mm)Auflösung: 300 x 450 dpi Vertikale Baugeschwindigkeit: 0,9 Zoll/Stunde (23 mm/Stunde) Baugröße: 8 x 10 x 8 Zoll (203 x 254 x 203 mm)Material: Hochleistungs-Verbundpulver-Schichtdicke: 0,0035 - 0,004 Zoll (0,089 - 0,102 mm)Anzahl der Düsen: 604Automatisierung: Vollständig (automatisierte Einrichtung und Selbstüberwachung, automatisierte Pulverbeladung, automatisiertes Pulverrecycling und -entna...
4 x 1 L
A fast, general purpose plastic material ideally suited for prototyping applications. The FabPro’s precision printing in this opaque gray material highlights fine features and is ready for finishing and painting, perfect for high quality prototypes and models.
Applications:
Rapid prototyping
Design iteration
High quality prototypes (ready for finishing and painting)
Display models (ready for finishing and painting)
Btz98p0kwh
Metal 3D printer
Laser Type / Power: Yb Fibre Laser / 250 W
Wavelength: 1070 nm
Lens: Precision F-Theta Lens
Building Volume: Ø 100 mm x 100 mm
Reservoir Volume: Ø 110 mm x 200 mm
Coater: Rotation led precision coater
Gas Connection: Argon/Nitrogen
Wroredlz
Layer Thickness: 20 – 100 μm
Scan Speed: Jog 20 m/s, Operation 6 m/s
Spot Size: min. 40 μm
Machine Opening: 450 x 180 mm
3D Tiles production line
> Production line consisting of 3 machines, computer with software
> Consumables: Foil ok. 950m2, tiles 60x60cm –approx: 200m2, around 35 L UV Paint in 4colours, Activator 18 L i cleaning fluid ok. 17 L,
glass approx. 300 m2
www website with easy handling form CRM Panel
Online help from manufacturer
Oes9b
Printing technology and forming without air bubbles.
Brand mytiles
Video movies reg. Software usage
Spare parts; printing head, UV Paint hoses, pump, extra plc for...
Langenfeld, Germany
(dealership location)
7003 km