Vertical Eroding Machine

AGIE Agietron Impact 2

Condition: good (used), Year of construction: 2006, 1 CNC tube end forming machine Manufacturer: BLM Type: Tube Form M32x1.5 Year of manufacture: 2006 Technical specifications Thrust force: 3.5 tons Locking force: 5 tons Working stroke: 130 mm Tool diameter: 80 mm Dimensions: 2400 x 1400 x 2000 mm Ijdpfjn Sm Ddsx Ab Ioa Connected load: 12 kVA Weight: 2200 kg

Condition: used, x-travel:600 mm y-travel:fest mm z-travel:650 mm weight of the machine ca.:ges. 0,124 t dimensions of the machine ca.:0,7 x 1,0 x 1,05 m surface measuring, testing and evaluating unit for roughness and unevenness parameters with measuring post and feed device, incl. data logger with profile memory and full digital measured-value processing, fully programmable, evaluation according to different evaluation programs with single measuring run, reference-plane measuring on badly aligned, curved and tilted surfaces, automatic correction of height offset and tilt, measuring program with permanent storage and quick access, clearly arranged control elements, universal by plug-in program module for special functions, measuring post PST-Se, large black granite base plate with a 14 mm T-slot, table 650 x 450 mm, PRK feed device, adaptable precision scanning device for roughness, unevenness and form measuring, tracing length 1,5-60 mm, Isdjcxxrgepfx Ab Isa guidance accuracy 2 µm, tracing speed 0,5 and 0,1 m/s, automatically adjustable, return speed 1,5 m/s, standard - interval and terminal contact operation, extensive accessories, exchange calliper, calliper height-adjustable, calliper holder, calliper, etc.

Condition: good (used), Year of construction: 2007, Machine is in good condition, Parts shown by hand not come. Isdpfx Abowk Nm Ie Ioa SK 40, 24 tool places in tool changer. 10.000 rpm

Condition: new, New lathe with large spindle bore. Brand : KMS Type : CS6250C TDC : 1000mm Turning diameter over bed : Ø 500 mm Turning diameter over slide : Ø 300 mm Turning diameter in bag : Ø 710 mm Turning length in bag: 240 mm Bed width : 390 mm Spindle diameter : Ø 105 mm Spindle speeds : 12 (36 - 1600 rpm) Tailstock spindle diameter : 75 mm Tailstock range : 150 mm Tailstock recording : MC 5 Machine dimensions : ± 2630 x 975 x 1270 mm (L x W x H) Iodpfx Aehhm Edsb Iea Machine weight: ± 2100 kg Machine equipped with: - Longitudinal and transverse feed. - Rapid traverse on longitudinal and transverse feed. - Movable and adjustable stops for automatic longitudinal feed. - Thread cutting shaft (Metric/Inch/Module/DP thread cutting possible. - Multifix type quick change tool holder. - 2-axis digital readout (Brand: Sino). - 3-jaw chuck Ø 315 mm, bore 100 mm (Camlock). - 4-jaw chuck Ø 400, bore 105 mm (Camlock). - Drive plate Ø 630 mm (Camlock). - Steady rest Ø 120- Ø 260 mm. - Follow rest Ø 20 – Ø80 mm. - Coolant device.

Condition: excellent (used), ein ausgesprochenes Einzelstück,ca.12x6 m Iodjfi Tmcepfx Ab Ioa

Year of construction: 2006, condition: ready for operation (used), Travel X/Y/Z: 835mm/510mm/510mm, speed: 12000rpm, spindle power: 14kW, table dimensions X/Y: 1000mm/560mm, table load capacity: 800kg, max. workpiece height: 720mm. Tool positions: 20, tool holder: SK40, max. tool diameter: 80mm/130mm, max. tool length: 250mm, rapid traverse: 30m/min, feed: 20m/min. Machine dimensions X/Y/Z: approx. 3500mm/3500mm/2700mm, weight: approx. 4500kg, control: Heidenhain iTNC 530, operating hours: 112962h, spindle hours: 30702h. Including chip conveyor, IKZ, distance measuring system. Documentation available. On-site inspection is possible. Iodpfx Abov H Dgps Ioa

Condition: good (used), Year of construction: 2007, Gildemeister lathe NEF 600 year of construction 2007 Isdpfxoucl Als Ab Isa Heidenhain Plus control Turning diameter max. 600 mm Center distance 1.250 mm Swing diameter over bed 600 mm Cross stroke 320 mm Main spindle: Speed range - main spindle max. 3,000 min/-1 Spindle bore 90 mm Chuck diameter 320 mm Tool turret: Number of tool positions 8 pos. Total power requirement 42 kVA Weight of the machine approx. 5.0 t Space requirement approx. 3.6 x 2.14 x 1.95 m Accessories: , flushing gun, Schunk lathe chuck 315 mm, Tailstock MK 5

Year of construction: 2003, condition: ready for operation (used), A total of seven injection molding machines Arburg are available. 1) Arburg 320C 600-250, year of manufacture: 2001, operating hours: 83365h, clamping force: 600kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2470bar, injection volume: 106cm³, centering: 125mm/125mm, max. opening stroke: 550mm, plate distance: 550mm, plate dimensions X/Y: 446mm/446mm, tie bar distance: 320mm/320mm, core pulls: 2, temperature control units: 6, machine dimensions X/Y: approx. 4000mm/2300mm. Including Multilift handling unit. 2) Arburg 420C 1000-250, year of manufacture: 2001, operating hours: 90769h, clamping force: 1000kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2470bar, injection volume: 106cm³, centering: 125mm/125mm, max. opening stroke: 750mm, plate distance: 750mm, plate dimensions X/Y: 570mm/570mm, tie bar distance: 420mm/420mm, core pulls: 2, machine dimensions X/Y: approx. 4700mm/2350mm. Including Multilift handling unit. 3) Arburg 270C 300-100, year of manufacture: 1999, operating hours: 78784h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2500bar, injection volume: 31cm³, centering: 110mm/110mm, max. opening stroke: 550mm, plate distance: 550mm, plate dimensions X/Y: 446mm/446mm, tie bar distance: 270mm/270mm, core pulls: 1, temperature control units: 6. Including Geiger handling unit. 4) Arburg 320C 300-100, year of manufacture: 2000, operating hours: 78784h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2500bar, injection volume: 31cm³, centering: 125mm/110mm, max. opening stroke: 350mm, plate distance: 350mm, plate dimensions X/Y: 446mm/446mm, tie bar distance: 320mm/320mm, core pulls: 1, temperature control units: 6. 5) Arburg 220C 250-60, year of manufacture: 2001, operating hours: 86595h, clamping force: 250kN, screw diameter: 22mm, shot weight: 27g, max. injection pressure: 2340bar, injection volume: 30cm³, centering: 110mm/110mm, max. opening stroke: 425mm, plate distance: 425mm, plate dimensions X/Y: 400mm/400mm, tie bar distance: 221mm/221mm, core pulls: 1, temperature control units: 6. 6) Arburg 270C 300-100, year of manufacture: 2007, operating hours: 59885h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2500bar, injection volume: 31cm³, centering: 110mm/110mm, max. opening stroke: 550mm, plate distance: 550mm, plate dimensions X/Y: 446mm/446mm, tie bar distance: 270mm/270mm, core pulls: 2, temperature control units: 6, machine dimensions X/Y: approx. 3750mm/2400mm. Including Multilift handling unit. 7) Arburg 220S 250-60, year of manufacture: 2001, operating hours: 57504h, clamping force: 250kN, screw diameter: 18mm/22mm, shot weight: 18g/27g, max. injection pressure: 2500bar/2340bar, injection volume: 20cm³/30cm³, centering: 110mm/110mm, max. opening stroke: 425mm, plate distance: 425mm, plate dimensions X/Y: 400mm/400mm, tie bar distance: 221mm/221mm, core pulls: 1, temperature control units: 6, machine dimensions X/Y: approx. 3300mm/1100mm. Documentation available. An on-site inspection is possible. Iedpfx Astyyn Hjb Ija

Condition: used, Year of construction: 1980, machine/vehicle number: 19780, grinding length:600 mm grinding width:300 mm workpiece height:375 mm number of spindle speeds:1000 - 3000 UpM grinding wheel dimensions::300 x 50 x 76,2 mm grinding spindle drive:2,8 - 8,4 kW weight of the machine ca.:3,5 t Iodpocxxrzefx Ab Iea CNC-controlled, 3D-controlled profile-dressing unit, Unicom ELB-CNC control with integrated 024 CNC Unicon electric hand wheel, display screen, analogue spindle load display, stepless adjustable cross feed, coolant device with magnetic-roller chip collector, full housing, separate electrical cabinet, additional grinding wheel with flange

Condition: good (used), Year of construction: 2003, travel distance X-axis: 3,900 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 820 mm, rapid traverse X-axis: 1,00,000 m/min, rapid traverse Y-axis: 60,000 m/min, rapid traverse Z-axis: 60,000 m/min, workpiece weight (max.): 2,200 kg, table width: 900 mm, table length: 4,200 mm, 5-axis CNC machine (VMC) DECKEL MAHO - DMF 360 Linear HSK-A63 Spindle Iedpfx Abow Rdyho Isa Pendel screen Production package IKZ 40 Bar Filter capacity 23 L/Min Coolant tank 900 L Last DMG Repair in 2023 for 11.000 EUR    X - Travel: 3900mm Y - Travel: 920mm Z - Travel: 820mm B - Axis: 108° Table Length: 4200mm Table Width: 900mm Table load: 2200 Feed rate X-Axis: 100000mm/min. Feed rate Y-Axis: 60000mm/min. Feed rate Z-Axis: 60000mm/min. Spindle Taper: 63ISO/Bt/Mk Power on spindle: 35kW Speeds / ranges: 18000Rpm ATC / revolver: 30 Coolant through spindle / Bar:40 Number of controlled axis: 3+1 Chip conveyor: Yes Coolantsystem: Yes Length: 8500mm Width: 3450mm Height: 2910mm Weight: 30700kg