Used Wire EDMs with x-travel of 300-399mm for sale (59)

Condition: good (used), Year of construction: 2004, X-axis travel - 400mm Y-axis travel - 300mm Z-axis travel - 250mm Worktank length - 980 mm Worktank width - 730 mm Worktank height - 250 mm Cslrev Sw Hgjh N Nhsgt

Condition: good (used), Year of construction: 1998, DIE SINKER Charmilles Roboform Roboform type 31 Condition: funtional Celrhsu A Uvdo N Nhegt weight 2500 kg

Condition: good (used), Year of construction: 2011, Functionality: unexamined, machine/vehicle number: 396-900-195-0127, workpiece weight (max.): 400 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, total height: 2,200 mm, total length: 3,500 mm, total width: 3,500 mm, workpiece height (max.): 250 mm, workpiece width (max.): 680 mm, workpiece length (max.): 900 mm, table width: 480 mm, overall weight: 3,000 kg, table length: 700 mm, frequency: 50 Hz, - Operating voltage: 380 V - Frequency: 50 Hz - Rated current: 17 A Cslrh N Njv Tdn Hjhegt - Connected load: 11 kVA - Control system: AGIE CHARMILLES - U/V axes: 90 mm each Compressed air supply: - Pressure: 6–9 bar - Minimum pressure flow: 100 l/min Dielectric unit: - Clean tank capacity: 200 l - Dirty tank capacity: 600 l

Condition: excellent (used), Year of construction: 2011, Axes X/Y/Z ... 350/220/220 mm Movements U/V ... 350/220 mm Colrh N Njwffgajhogt Speed ... 0...900 mm/min Max. workpiece dimensions ... 1000 x 550 x 220 mm Max. workpiece weight ... 750 kg Machine dimensions ... 2020 x 2050 x 2000 mm Machine weight ... 2450 kg

Condition: good (used), Year of construction: 2001,   Cjlrhewf D Hfs N Nhjgt

Condition: ready for operation (used), Year of construction: 2004, Functionality: fully functional, machine/vehicle number: 132019, workpiece weight (max.): 500 kg, travel distance X-axis: 320 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 160 mm, Machine overhauled in 2007 Colrh N Newdxh Ushsgt TECHNICAL DETAILS X-axis: 320 mm Y-axis: 220 mm Z-axis: 160 mm U-, V-axis: ± 48 mm Tap pitch/height: ±30° / 66 mm Travel speed: 1 – 900 mm/min Working area Tank dimensions (W × D × H): 1,000 × 490 × 260 mm Load capacity: max. workpiece weight: 500 kg Dielectric volume: 240 l Wire EDM system Wire EDM diameter (single wire): 0.33 – 0.05 mm Wire EDM diameter (double wire): 0.33 – 0.05 mm Automatic wire threading: 0.33 – 0.05 mm Automatic rethreading: 0.33 – 0.07 mm Min. threading hole: 0.3 mm (for 0.25 mm wire) Number of spools: 2 front, 1 rear Front spool weight: 1.6 – 8 kg Rear spool weight: 16 – 25 kg Taper: ± 30° Dielectric Filter type: 3 built-in paper cartridges Total filter area: 66 m² Tank volume: 800 l Numerical control Control type: PC-based CNC Screen: LCD 12.1" TFT touchscreen MACHINE DETAILS Dimensions (W × D × H): 2,320 × 2,310 × 2,320 mm Machine weight (without dielectric): 3,900 kg Connected load: 15 kVA EQUIPMENT - Microcut function for wire diameters of 0.02–0.03 mm - CT robot interface installed at the factory

Condition: used, Year of construction: 2004, Wire erosion / EDM Travel distance X: 350 mm Travel distanceY :250 mm Travel distance z: 256 mm max. workpiece size X: 750 mm max. workpiece size Y: 550 mm max. workpiece size Z: 250 mm Csljwf I Imerh N Nhogt max. workpiece weight: 200 kg submerged cooling unit The machine has been serviced annually by the manufacturer.

Condition: used, Year of construction: 1998, Functionality: fully functional, Equipment: compressor, cooling unit, documentation/manual, fridge, Charmilles Wire EDM Cgelowf Nwcjrh N Nhet MACHINES UNPLUGGED SOLD AS IS WITHOUT WARRANTY

Condition: refurbished (used), Year of construction: 2018, Functionality: fully functional, GF AgieCharmilles Progress VP2 Year of manufacture 2018 Travels: X = 350 mm, Y = 250 mm, Z = 256 mm U/V axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200 (in bath) / 450 (without bath) kg Achievable surface quality: Ra: 0.20 µm Maximum cutting rate: 500 mm²/min Glass scales on the X and Y axes for increased precision Available wire diameters: 0.15 – 0.33 mm Water bath machine with automatic wire threading and rethreading after wire breakage With manual front door (accessible from one side) Incl. AGIEJOGGER handheld controller for convenient setup AGIE IPG-V generator with Power Module AGIEVISION 5 control system Dimensions (length x width x height): 1640 x 2040 x 2220 mm Net weight: 2580 kg Our machines are cleaned and overhauled upon receipt of order. A test cut with the best surface finish is then performed for acceptance. You receive a 6-month warranty on the machine. Cslrhowcmcws N Nhsgt We are happy to offer on-site commissioning and training.

Condition: good (used), Year of construction: 2003, In good technical condition and in working order. Year of construction 2003. X-axis 350 mm. Y-axis 250 mm. Z-axis 256 mm. Colrh Neu Tq Hwj Nhegt Workpiece length: 750 mm. Workpiece width: 550 mm. Workpiece height: 250 mm. Machine dimensions: L 1670 mm x W 2040 mm, H 2305 mm. Machine weight approx. 2600 kg.

Condition: good (used), Year of construction: 2000, Functionality: fully functional, Wire EDM machine CHARMILLES ROBOFIL 230F year of construction 2000 CNC control FANUC X-axis 350 mm Y-axis 220 mm Z-axis 220 mm Workpiece length 800 mm Workpiece width 500 mm Workpiece height 220 mm Max. Workpiece weight 500 kg Wire diameter - Min 0.004 in Wire diameter - Max 0.12 in Dielectric tank capacity 201 gal Cgslrev U Ud Ieh N Nhjt Weight 4.825kg

Condition: ready for operation (used), Year of construction: 2002, Functionality: fully functional, machine/vehicle number: 921022, workpiece weight (max.): 750 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, TECHNICAL DETAILS Travel X / Y / Z: 350 × 220 × 220 mm Travel U / V: 350 × 220 mm Taper pitch/height: ±30° / 220 mm Machining type: Submerged technology Control system: Windows NT with 12" TFT screen, standard keyboard, and remote control Working area Workpiece dimensions: max. 1,000 × 550 × 220 mm Workpiece weight: max. 750 kg Table dimensions: 680 × 450 mm Tank volume: 760 l Bevel cut: max. ±30° / 220 mm Wire EDM system Wire EDM diameter: Ø 0.33 to 0.10 mm Diameter for Automatic threading: Ø 0.33 to 0.10 mm Diameter for automatic rethreading: Ø 0.33 to 0.15 mm Dielectric Filter: 2 paper cartridges Dielectric temperature: ±1 °C Volume of ion exchange resin filling: 20 l Surface roughness: 0.20 µm Ra MACHINE DETAILS Dimensions (L × W × H): 2,020 × 2,050 × 2,000 mm Weight without dielectric: 2,450 kg Cjlrhsv Ul I Do N Nhsgt EQUIPMENT - CleanCut high-speed generator - Integrated wire shredder - Standard interfaces (PCMCIA, Ethernet, etc.)

Condition: used, Year of construction: 2006, Wire erosion / EDM Travel distance X: 370 mm Travel distanceY :270 mm Travel distance z: 250 mm max. workpiece size X: 570 mm max. workpiece size Y: 420 mm max. workpiece size Z: 240 mm max. workpiece weight: 500 kg table size X: 600 mm table size Y: 400 mm with AWF ( Automatic Wire Feeding ) U / V axis: +/- 120mm submerged cooling unit Celrh Njwfgvpe Nhegt Control unit: Sodick LQ33W Work tank internal dimensions: 850 × 610 mm U/V-axis travel: 120 × 120 mm Taper angle (workpiece thickness = 100 mm): ±25° Wire diameter: 0.15 – 0.3 mm Wire tension: 3 – 23 N Wire feed rate: max. 420 mm/s Distance floor to table surface: 995 mm Machine dimensions (W × D × H): 2125 × 2200 × 2220 mm Machine footprint: 3200 × 3200 mm Machine weight: 3800 kg

Condition: excellent (used), Year of construction: 2017, travels: x 400 mm Cgslrhsm Uyuxs N Nhet y 300 mm z 220 mm Wear-free tubular direct drive Water bath incl. cooler Automatic wire threading

Condition: good (used), Year of construction: 2001, Functionality: fully functional, Two Robofil 240 and 330 machines Cgelrhewf E Ahe N Nhot Charmilles Robofil 240 Year 2001 Travel (X, Y, Z axes): X = 350 mm, Y = 220 mm, Z = 220 mm. U/V axis movement: U = ± 30 mm, V = ± 30 mm, ensuring complex cuts and precision tapering. Maximum workpiece size: 860 mm x 530 mm x 220 mm. Workpiece weight: 500 kg. Table dimensions: 600 mm x 400 mm. Wire diameter range: typically 0.15 mm to 0.33 mm, allowing for cutting flexibility. Achievable surface finish: Ra 0.3 µm. Positioning accuracy: ± 0.002 mm. Machine weight: approximately 2,500 kg. In very good condition. Supplied with tools and documentation. In good working order. Charmilles Robofil 330F Year 2000 Travel (X, Y, Z axes): X = 400 mm, Y = 300 mm, Z = 400 mm. U/V axis travel: U = ± 30 mm, V = ± 30 mm - essential for complex taper cuts. Maximum workpiece dimensions: 800 mm x 550 mm mm x 400 mm.Maximum workpiece weight: 1000 kg.Table size: 600 mm x 450 mm.Wire diameter capacity: 0.1 mm to 0.3 mm, meeting various cutting requirements.Achievable surface finish: Ra 0.25 µm.Positioning accuracy: ± 0.005 mm.Machine weight: approximately 3500 kg.In very good condition.Supplied with tools and documentation.In good working order.

Condition: good (used), Year of construction: 2004, Machine is in very good condition. Cgelrh N Novkuqtshst Parts shown by hand not come.

Condition: refurbished (used), Year of construction: 2004, Functionality: fully functional, Robofil 240 CC Year of manufacture 2004 Charmilles Millenium control system Travel paths (X / Y / Z): 350 x 220 x 220 mm Travel paths (U / V): 350 x 220 mm Maximum taper angle: +/- 30° at 200 mm height Integrated Collision Protection (ICP) on all 5 axes Maximum workpiece dimensions: 1000 x 550 x 220 mm Maximum workpiece weight: 750 kg Cutting speed of 400 mm²/min Best surface finish: Ra 0.20 µm Available wire diameters: 0.15 mm to 0.33 mm Dimensions of the complete system: 2030 x 2201 x 2000 mm Total system weight: 2450 kg Cslrhsv Tcynj N Nhsgt The Upon receipt of order, we will clean and overhaul the machine, and test all functions. We are happy to offer the following optional services: - Transport, including loading and delivery - Commissioning of the machine at your location - Control system instruction - 6-month warranty on machine functionality - Accessories such as coolers and clamping devices

Condition: ready for operation (used), Year of construction: 2002, Functionality: fully functional, machine/vehicle number: 194604, workpiece weight (max.): 800 kg, travel distance X-axis: 628 mm, travel distance Y-axis: 398 mm, travel distance Z-axis: 162 mm, TECHNICAL DETAILS X-axis travel: 628 mm Y-axis travel: 398 mm Z-axis travel: 162 mm U-axis travel: ± 48 mm V-axis travel: ± 48 mm Cutting speed: max. 711 mm/h Working area Workpiece size (W × D × H): 1,350 × 688 × 361 mm Max. workpiece weight: 800 kg Cone pitch/height: ± 30° / 67 mm Axis measurement: linear glass measuring rod Wire EDM system Wire guides: 0.10 mm and 0.25 mm Permissible coil weights: 4 to 8 kg Dielectric Number of filter cartridges: 16 Units Cslrhjv Tpule N Nhegt Tank volume: 1,003 l MACHINE DETAILS Weight (with dielectric): 5,200 kg Input voltage: 380/400 V (three-phase alternating current) Power consumption: total: 12 kVA Installation dimensions: approx. 4.3 x 1.3 m EQUIPMENT - Linear scales on all axes - Collision protection on the U, V, and Z axes - Automatic wire threading and rethreading - CAM-CT for path programming - CT-EXPERT for generator optimization - PROFIL-EXPERT for geometry-dependent cutting strategies - DIN-compliant wire spool holder

Condition: used, Year of construction: 2004, Wire erosion / EDM Travel distance X: 350 mm Travel distanceY :220 mm Travel distance z: 220 mm max. workpiece size X: 1000 mm max. workpiece size Y: 550 mm max. workpiece size Z: 220 mm max. workpiece weight: 750 kg table size X: 680 mm table size Y: 450 mm Colrsvyzgajh N Nhsgt with AWF ( Automatic Wire Feeding ) U / V axis: 350mm / 220mm submerged

Condition: good (used), Year of construction: 2002, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, table load: 750 kg, With cooler Cgelrjwcq Azjh N Nhot

Condition: good (used), Year of construction: 2004, A well-maintained AgieCharmilles star hole drilling machine that operates reliably. Control unit: VDF monitor All travel speeds and the high-pressure pump can be controlled via the interface keyboard. Technical specifications: Cslrheu Tviks N Nhsgt Travel range X 300 mm, Y 200 mm, Z 300 mm, auxiliary axis (manual) 100 mm Bore diameter range 0.3-3 mm Maximum depth 200 mm Worktable: Dimensions 500 mm x 300 mm Maximum workpiece weight 300 kg Water tank: Tank volume 10 l Machine specifications: Dimensions 1,340 mm x 900 mm x 1,940 mm Total weight 1,200 kg Power supply: 400 V, 50 Hz, 4 kVA

Condition: refurbished (used), Year of construction: 2004, Functionality: fully functional, AGIECUT Challenge 2 eCut Year of construction 2004 Cjlrorzt Rdoh N Nhegt Travel (X/Y/Z): 350 x 250 x 256 mm Travel (U/V): +/- 70 mm Maximum taper: 30° at 100 mm Maximum workpiece dimensions (length/width/height): 750 x 550 x 250 mm Maximum workpiece weight (with/without bath): 200/450 kg Best achievable surface: 0.2 µm Ra Available wire diameters 0.10 - 0.33 mm Incl. AGIE universal clamping frame Incl. AGIE JOGGER handbox Incl. console with USB connection The machine has already been cleaned, overhauled and tested by us. We would be happy to carry out a test cut for you on site. Optional: - Commissioning - training - Transportation - Cooling unit - Clamping device

Condition: ready for operation (used), Year of construction: 2002, Functionality: fully functional, machine/vehicle number: 124322, workpiece weight (max.): 500 kg, travel distance X-axis: 318 mm, travel distance Y-axis: 218 mm, travel distance Z-axis: 114 mm, TECHNICAL DETAILS X-axis travel: 318 mm Y-axis travel: 218 mm Z-axis travel: 114 mm U-axis travel: ± 48 mm V-axis travel: ± 48 mm Control system: PC-based, 14" color monitor, MS-DOS Tap pitch/height: ±30° / 65 mm Working area Type: Tray with swing door Max. workpiece dimensions (W × D × H): 1,130 × 510 × 260 mm Door width: 1,010 mm Max. workpiece weight: 500 kg Table dimensions (W × D): 560 × 440 mm Distance from floor to table: 1,050 mm Volume of the Dielectric capacity: 240 l Dielectric level control: Automatic Wire EDM system Wire diameter: 0.10 – 0.25 mm Wire guide type: Diamond-enclosed guide, zero backlash Programmable wire unwinding speed: 0.2 to 15 m/min Programmable wire tension: 0.3 to 3 daN Permissible spool weight and type (according to DIN): 1.6 kg Permissible spool weight and type (according to JIS): 3 kg Used wire recycling: Wire shredding at the rear Cgolrh Nov Tpnre Nhjt Automatic threading for wire diameters: 0.050 to 0.300 mm Automatic rethreading for wire diameters: 0.070 to 0.300 mm Minimum threading hole diameter: 0.300 mm for 0.250 mm wire Dielectric Type: Deionized Water Total dielectric volume: 900 l Dielectric temperature: ±0.5 °C Cartridge filters: 16 Deionization resin volume: 30 l Deionization control: Automatic Number of deionization bottles: 3 Injection pressure range: 0 – 20 bar Number of programmable pressure levels: 16 Generator Max. processing speed (material: steel, wire: SW30X): 300 mm²/min Min. surface roughness (material: steel, height: 20 mm): 0.12 µm Ra Min. surface roughness (material: carbide, height: 20 mm): 0.1 µm Ra Available technologies: Steel, carbide, copper, graphite, aluminum, PCD, copper-tungsten MACHINE DETAILS Machine dimensions (L × W × H): 3,690 × 2,520 × 2,290 mm Weight (without dielectric): 4,400 kg Input voltage: 380/400 V Power consumption: 12 kVA

Condition: used, Year of construction: 2005, Wire erosion / EDM Travel distance X: 350 mm Travel distanceY :250 mm Travel distance z: 256 mm max. workpiece size X: 750 mm max. workpiece size Y: 550 mm max. workpiece size Z: 250 mm max. workpiece weight: 450 kg with AWF ( Automatic Wire Feeding ) U / V axis: +/- 70 mm submerged Taper 30° at height 100 mm Celrsvtfpxeh N Nhogt

Condition: ready for operation (used), Year of construction: 2004, Functionality: fully functional, machine/vehicle number: 132019, workpiece weight (max.): 500 kg, travel distance X-axis: 320 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 160 mm, Machine overhauled in 2007 TECHNICAL DETAILS X-axis: 320 mm Y-axis: 220 mm Z-axis: 160 mm U-, V-axis: ± 48 mm Tap pitch/height: ±30° / 66 mm Travel speed: 1 – 900 mm/min Working area Tank dimensions (W × D × H): 1,000 × 490 × 260 mm Load capacity: max. workpiece weight: 500 kg Dielectric volume: 240 l Wire EDM system Wire EDM diameter (single wire): 0.33 – 0.05 mm Wire EDM diameter (double wire): 0.33 – 0.05 mm Automatic wire threading: 0.33 – 0.05 mm Automatic rethreading: 0.33 – 0.07 mm Min. threading hole: 0.3 mm (for 0.25 mm wire) Number of spools: 2 front, 1 rear Front spool weight: 1.6 – 8 kg Rear spool weight: 16 – 25 kg Taper: ± 30° Dielectric Filter type: 3 built-in paper cartridges Total filter area: 66 m² Tank volume: 800 l Numerical control Control type: PC-based CNC Screen: LCD 12.1" TFT touchscreen MACHINE DETAILS Dimensions (W × D × H): 2,320 × 2,310 × 2,320 mm Machine weight (without dielectric): 3,900 kg Connected load: 15 kVA Cgslsv Tn A Usrh N Nhjt EQUIPMENT - Microcut function for wire diameters of 0.02–0.03 mm - CT robot interface installed at the factory