Thermoforming machine

AL.MA. TF 320

Condition: excellent (used), C.N.C. WORKING CENTER with 3 axes (X-Y-Z) - Goose-neck type Movable panel (workpiece), static working head, Horizontal position of the panel (workpiece) Numerical Control with Software BiesseWorks (Separate electric and command cabinet) Safety cabin (enclosure) of the working head, Front emergency carpets In-feeding working table (panel support) No. 2 Workpieces fixing clamps (for the panels introduction in the working area) Out-feeding table (with motorized belts) Minimum workpieces dimensions (X - Y - Z) mm 90 x 70 x 8 (ca.) Maximum workpieces dimensions (X - Y - Z) mm 3000 x 1300 x 60 (ca.) Total installed power (Kw) 24 BOTTOM WORKING UNITS: Independent vertical boring spindles (No.) 29 Independent horizontal boring spindles (No.) 10 (8 X + 2 Y) Circular Grooving Saw (on X axis) dia. (mm) 160 (1 x kw 3,5 ca.) Vertical electro-spindle (No.) ISO 30 (1 x kw 4,5 ca.) TOP WORKING UNITS: Indipendent vertical drilling spindles (No.) 29 Indipendent horizontal drilling spindles (No.) 10 (8 X + 2 Y) Ksdpfswb Allox Abceww Circular Grooving Saw (on X axis) dia. (mm) 160 (1 x kw 3,5 ca.) Vertical electro-spindle (No.) ISO 30 (1 x kw 4,5 ca.)

Condition: like new (used), Year of construction: 2012, Profiling parquet machine for longitudinal side 5+5 motors Speed up to 60 m/min Min. Working width 70 mm (65 mm without bevel) Diamond tools for T&G profile +infeed belt conveyor Kwodpfxjxwnhbe Abcow

Condition: as good as new (ex-display), operating hours: 50 h, Uhlmann thermoform packaging system UPS 4 ETX for processing PVC forming film and aluminum lidding film Basic machine in modular technology and balcony construction, with 12 modules: - Molding film holder with 2 pneumatic clamping shafts for core diameter 76 mm, max. roll diameter 800 mm - Cutting and gluing table for shaped film - Shaped film unwinding, clocked - 3-zone contact heating: - 6 heating circuits, individually adjustable - Simultaneous heating of min. 3 feeds - Heating plates during machine stop automatic opening - Forming station with 4-column lifting table guide - Filling section, length 1,360 mm - Safety flap on the filling section Cover film unwinding on operating side with pneumatic expansion shaft for core diameter 76 mm, max. roll diameter 300 mm - Plate sealing station with 4 columns lifting table guide: - Integrated overload protection - Automatic lifting of the upper sealing sealing tool when the machine stops - Free module for the installation of an additional station - Clamping gripper feed - Punching station with blister lowering - Waste cutter with integrated motorized Ksdetndpzjpfx Abcoww transport of the punching grid - Smoothing device - ET/DT perforating station - Monitoring of the compressed air supply with machine stop when the minimum the minimum value - Visio Scan - Electrically interlocked safety doors - Quick format change due to - plug-in format parts - Plug-in connections for cooling water supply - Main drive with frequency-controlled three-phase motor geared motor - Switch cabinet at the rear of the machine, swivel-mounted Paccontrol operating control - 10.4" TFT color display with 640x480 pixel resolution - Processor 68C030 - OS9 2.9 operating system - 2 MB SRAM, 2 MB Flash, 16 MB DRAM - SRAM card reader - IBM standard membrane keyboard - Centronics interface for external printer - PS2 interface for external keyboard - VGA interface for external monitor - Serial interface for diagnostic purposes - Arcnet interface - 8 serial interfaces for connecting devices Integrated shift register ISR Rejection of individual blister rows, e.g. overheated film in the heating station, products in the sealing station, etc. Machine control: Memory-programmable sequence control in modular design: - B&R - PLC control - Bus system with modules for CPU, inputs, outputs, temperature controller, cam controller, etc. - External program memory Technical data UPS 4 ETX: - Number of cycles: - ET range: min./max. : 15/ 50 T/min. depending on film quality, feed and format design - Format range: min./max. feed in filling area : 64/226 mm min./max. film width : 100/300 mm min./max. punching width : 28/284 mm max. drawing depth : 12 mm - Compressed air: - Inlet pressure: approx. 6 - 8 bar 4 Simtap feeders

Condition: new, Year of construction: 2026, Standard Features Torsion-resistant, robust cast iron saw frame Powered chip removal brush Powerful industrial worm gear motor Automatic shut-off after cutting Mechanical saw blade tensioning with electrical blade breakage monitoring Slidable quick-action vise Hydraulic saw frame lowering with rapid traverse function (infinitely adjustable) Electric coolant pump Precision carbide saw blade guides, ground (adjustable) Large round support table, rotates during miter cuts, miter indicator (scale) on the operator side Direct switching from manual to lowering mode Easily removable chip collection tray 500 mm material stop with scale Including saw blade with 4/6 combi toothing. Technical Specifications Motor: Three-phase 400 V, pole-changing, 1.1/1.5 kW Blade dimensions: 2720 x 27 x 0.9 mm Flywheels: 300 mm Ø Cutting speed: 40/80 m/min Vise clamping width: 275 mm Working height: 978 mm Weight: 370 kg Machine dimensions (W x D x H): 1150 x 1588 x 1477 mm Kwsdefg Eq Ropfx Abcew Cutting area: see data sheet Please inquire about additional accessories. DELIVERY: FREE DOOR (within Germany) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: used, functionality: fully functional, power: 147 kW (199.86 HP), fuel type: diesel, overall weight: 18,200 kg, Year of construction: 2000, operating hours: 12,370 h, JCB 456B Wheel Loader Year of manufacture: 2000 12,370 operating hours Total weight: 18,200 kg 147 kW 1x bucket GOOD CONDITION Export net price: €18,500.00 Kodpewk Evfjfx Abcsww All information provided without guarantee / subject to errors and omissions.

Condition: ready for operation (used), controller model: Siemens Sinumerik, empty load weight: 35,000 kg, total length: 7,000 mm, total width: 2,300 mm, total height: 3,300 mm, PORTAL WHEEL LATHE Siemens CNC control track wheel diameter range: 540 1400 mm axle length: max 2600 mm max track: 1435 mm max. workpiece weight: 5 tons main power: 100 kW cutting speed: max 500m/min Railset lathe / Railway lathes / Rail lathe Kwedpfsv St E Esx Abcow high machining accuracy in terms of concentricity and surface quality optimal force parallelogram measuring system for diameter and profile wear measuring system for CL+CR determination measuring system for determining the concentricity of the drive shaft measuring system for wheel and axle brake discs re-profiling of all common locomotive, passenger car and wagon wheel sets planning of axles and wheel brake discs rim processing axle processing marking groove turning Chip shredder included

Condition: refurbished (used), Year of construction: 2017, Was overhauled in 2017, with documentation. Kodpowqd Adjfx Abcsww

Condition: ready for operation (used), A fully automatic tray sealing machine VC 999 in inline design is available. Tray depth: 120mm, tool dimensions single: 350mm/460mm, tool dimensions double: 350mm/222mm, tool dimensions quadruple: 350mm/145mm, packaging capacity: 8-12cycles/min, machine dimensions X/Y/Z: approx. 4500mm/1000mm/1800mm, weight: approx. 900kg. An on-site inspection is possible. Kjdpfexph N Ajx Abcjww

Condition: excellent (used), HSS saw grinder SCHMIDT TEMPO model ECE45 Kedpfox Hp Tmox Abcjww

Condition: ready for operation (used), Year of construction: 2007, spindle speed (max.): 6,000 rpm, This HAAS SL-10 HE was manufactured in 2007. It is a horizontal turning machine featuring a maximum cutting diameter of 173 mm and a length of 406 mm. Equipped with a 3-jaw chuck and 12 tools, it operates at a spindle speed of 6000 RPM. Consider the opportunity to buy this HAAS SL-10 HE horizontal turning machine. Contact us for more information. • Maximum Cutting Diameter: 173 mm • Maximum Cutting Length: 406 mm • Number of Tools: 12 Kodpfjx Uqnbjx Abcoww • 3-jaw chuck