Dosing systems for polymers

Alltech Polymat 1000 V7 KD S

Condition: new, Year of construction: 2022, A brand new generating set, consisting of two generators placed in one housing, based on Scania engines. Possibility of synchronization with other units or aggregates, and optionally also with the network. Csdpfx Ajmrqi Esddjaa Maximum Power E.S.P. [kVA] / [kW] 902.0 / 722.0, Rated power P.R.P. [kVA] / [kW] 820.0 / 656.0, Driver type: ComAp InteliGen 500, Easy-to-use, intuitive graphical interface.

Year of construction: 2011, condition: good (used), Offer 24370 Technical data: - Sludge filter press JUNGHANS with cylinder unit + conveyor belt - Flocculation unit - pumps Caedpfx Aet Srkpoddea - Switch cabinet with electrical equipment - Aluminum water collection tray in the complete container floor - Lighting system - Sea container with 4 doors - Space requirement approx. W 6.0 x H 2.4 x D 2.4 m - Weight approx. 5000 kg - Separate conveyor belt L 8.0 m

Condition: new, Year of construction: 2025, Construction The standard frame of the container wash is made of stainless steel – AISI 304 (it is possible to make the frame eg. From AISI316 steel - optional) Equipment The IBC wash is equipped with single workplace. It is possible to semi-automatically wash the IBC container inside (using a lowered head) and manual washing of the container from the outside (with a washing gun). Workplace The machine has a system for a dosing single type of chemicals to the process and a tank with a system for heating and maintaining the water temperature. Workstation has a turntable that allows for more thorough cleaning of the container from the outside and an automatic cradle that facilitates rinsing. Installation Csdpfeirfmlox Addjaa The container wash has feet that allow to adjust the level of machine. Customer should provide a place with the possibility of connecting media such as: cold/hot water, compressed air and sewer drain. Base with turntable & tilt funtion. The washing station has a movable base of the container that allows cleaning the outside of the container from each side. During external washing, the base rotates under the influence of the water jet directed at the container. Rotation can be blocked with a special brake.

Condition: used, Year of construction: 2000, Overview  The labeler was manufactured in 2000 by the German manufacturer Krones. It can label up to 22,000 bph and has processed 0.5l so far. The machine can be purchased refurbished and with warranty on request.  Technical data  Rotary labeling machine for the application of a wrap-around label Capacity: max. 22.000 bph  Processed formats: 0,5l Number of plates: 15 Hot glue Label: OPP Roll fed Caedpom Ip Dksfx Addja

Condition: good (used), Year of construction: 2004, functionality: fully functional, power: 30 kW (40.79 HP), type of input current: three-phase, Item: DP-51241-AlfaLaval-LKH 70/216 SSS Brand: Alfa Laval Cedpfotk Hxwjx Addsaa Type: LKH 70/216/SSS/30kW Serial number: 061159 Year: 2004 Engine: 30 kW

Condition: reconditioned (used), Year of construction: 2013, operating hours: 18,819 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,085 mm, filling opening length: 2,815 mm, bale length: 1,200 mm, bale width: 100 mm, bale height: 800 mm, bale weight: 400 kg, total width: 3,140 mm, total height: 2,900 mm, total length: 8,840 mm, overall weight: 7,380 kg, transport height: 2,900 mm, power: 9 kW (12.24 HP), year of last overhaul: 2023, transport width: 2,400 mm, transport length: 5,650 mm, Good day, We hereby offer you a used baler from the manufacturer Strautmann, type BaleTainer. The following technical data was taken from the manufacturer's operating instructions and brochures, for which we cannot accept any liability for correctness and completeness. Manufacturer Strautmann Type BaleTainer Year of construction 2013 Operating hours 18,819 hours Number of bales pressed 7,019 pieces Caedpfx Ajt H Rgfsddja Pressing force main press 60 tonnes Drive power 9.2 kW Machine weight press 7.38 tonnes The baler was partially overhauled. The piston rods and seal sets of the two main hydraulic cylinders were replaced and general maintenance work such as oil and filter changes etc. was carried out. Finally, after the overhaul work, the machine was tested. The press is equipped with a hydraulic tilting device for loading in order to empty lattice box containers on a truck ramp. For example, the machine can be positioned with the tilting device on a truck ramp. There, the employees can roll the material to the tipping device with a mesh trolley and then have it tipped hydraulically into the baler. The machine can also be loaded from the side via the large feed/storage container using a forklift truck or wheel loader. Conveyor belt loading would certainly also be feasible. The machine documentation is available in German. A viewing is possible by appointment in our workshop. We would be delighted if this machine is of interest to you. Your service team Mertens & Frowein GmbH

Condition: used, Maselli Misure, Analysis System IB-01 for carbometric analyse in brewery and juice production, Good condition Cedec Npzzepfx Addsaa

Condition: new, total length: 9,900 mm, total width: 8,450 mm, total height: 1,580 mm, Brand new stainless steel agitator tank with anchor agitator Cedpfx Adjq Rc Egjdoaa Application: Stirring mustard mash Type: CILC200BRWAA4 Item number: 10760 Volume: 221L Type: Upright design on reinforced feet with castors Design: Single-walled Material (wetted parts): 1.4404 stainless steel V4A Surface: Satin finish outside, IIId inside Internal weld seams: Pickled, passivated and brushed Operating pressure: Atmospheric Top shelf: Central crossbar with two hinged lid halves Underbody: Conical base with DN32 DIN11851 pipe pulled forward Tank dimensions: Tank diameter: 650mm Total height: 1580mm Cylinder height: 650mm Height of feet: 460mm Equipment: - Central crossbar with two hinged lid halves, sheet metal grids as protection against access, screwed, removable - Latching function for hinged lid -1 x outlet valve DN32 ball valve DIN11851, EPDM/PTFE seal Agitator: Anchor agitator Make: Schwarzer Rührtechnik GmbH Type: SRTGMK/0,37-21 Power: 0,37KW Speed: 21UPM (infinitely variable) Operating voltage: 1PH 230V -Motor and gear unit in the latest aluminum technology, manufactured by Getriebebau NORD Food-approved oil filling -Massive agitator shaft attached to the agitator motor with sleeve coupling, removable -Stirrer shaft balanced for concentricity in the speed range -1 piece space-saving anchor agitator, welded design, weld seams ground -Stainless steel flange with shaft seal, EPDM Agitator control unit: CEE plug switch on the container, on/off switch, emergency stop, phase inverter, zero-voltage release Infinitely variable speed control of the agitator motor by means of a compact frequency inverter mounted on the motor, manufactured by Getriebebau NORD. Incl. potentiometer. Pre-programmed for agitator operation. Operating voltage 1PH 230V Drive power is increased to 0.37KW by this position

Condition: ready for operation (used), Two Machines Flake Purifier+ C 512 HR Color Sorter & Flake Purifier+ N 1024 Sesotec Polymer sorter Casdpfoxlknmsx Addoa Specs on Flake Purifier+ C 512 HR Color Sorter Refurbished in 2021 Technical Data Throughput up to (kg/h) Up to 3.8 Suitable grain sizes 2 - 20 mm Power (max. KVA) 3.4 Temperature range +5"C to + 40"C Weight 1300 to 1500 kg Electrical connection Power connection cable 5x4 mm2 Electric fuse 16 A Protection class IP 54 Rated current (max. A) 5 Specs on Flake Purifier+ N 1024 Sesotec Polymer sorter Technical Specifications • Working width: 1024 mm • Nozzle grid / valve spacing: 3.2 mm • Number of valves: 160 high-speed air-eject nozzles • Detection resolution: 2 mm (optical) / 16 mm (metal) • Metal detection sensitivity: Fe ≈ 0.6 mm | Al ≈ 0.1 mm • Throughput capacity: up to 3 – 3.8 t/h (depending on material and sensor setup) • Sorting technology: CCD color camera + metal detector (“CM” configuration) • Particle size range: 2 – 20 mm • Separation method: Compressed-air blast via precision valve array • Enclosure rating: IP 54 • Power requirement: ≈ 3.4 kVA | 230 V, 50 Hz • Operating temperature: +5 °C to +40 °C • Purity achievable: up to 99.999 % (depending on configuration) • Control system: Touch-screen interface with VISUTEC software (optional remote monitoring via VISUDESK) • Modular design: Expandable to include NIR sensor (“N”) or additional sorting modules

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: SF22+, overall weight: 687 kg, power: 22 kW (29.91 HP), volume flow: 144 m³/h, operating pressure: 8 bar, Atlas Copco compressor SF22+ dryer CD45+ set Oil-free compressed air compressor Pressure: 8 bar Capacity: 2.4 m³/min 22 kW Weight: 687 kg Year of manufacture: 2024 Unused compressor and dryer set Casdpfsxby H Dox Addsa All employees speak Dutch, German, and English Prices are exclusive of VAT Shipping possible (subject to extra charges) (Changes and errors in technical data, information, and pricing as well as prior sale reserved)