Control unit

APC by Schneider Electric Upsilon STS 600

Condition: used, Year of construction: 2010, 2 Number of axles 4 St. Iodpfsqn A Rkjx Aanetr tool taper HSK 63 toll turrets 60 weight 9600 kg

Condition: reconditioned (used), Year of construction: 1992, functionality: fully functional, center height: 150 mm, grinding length: 620 mm, center width: 680 mm, grinding wheel diameter: 350 mm, total width: 500 mm, Condition of the machine: The machine is currently in a used, non-overhauled condition. The following work carried out on the machine: Iodpforz Nflex Aanotr - Complete disassembly of the entire machine except for the guides - Replacement of all sealing and wear parts of the entire machine - Replacement of the infeed spindle of the X-axis - Replacement of the main bearing of the workpiece spindle - Replacement of grinding spindle - All machine assemblies are restored to as-new condition Geometry: - Scraping of the X-axis guide - Scraping the Z-axis guide - Grinding the X-axis table - Grinding the Z-axis table - Grinding the upper tables - Grinding of the assembly housing (workpiece headstock, grinding headstock and tailstock) - Creation of measurement report for TSCHUDIN cylindrical grinding machine Painting: The main assemblies are repainted, the rest of the machine retains the original paintwork Electronics: The complete electronics of the machine are checked, tested and defective switches and cables are replaced

Condition: ready for operation (used), Year of construction: 2005, operating hours: 52,455 h, functionality: fully functional, machine/vehicle number: 2501-0154, turning length: 600 mm, turning diameter over cross slide: 140 mm, turning diameter: 300 mm, spindle motor power: 25,000 W, spindle speed (min.): 5,000 rpm, spindle speed (max.): 5,000 rpm, travel distance Z-axis: 900 mm, rapid traverse X-axis: 3 m/min, rapid traverse Y-axis: 3 m/min, rapid traverse Z-axis: 3 m/min, rotational speed (max.): 4,000 rpm, rotational speed (min.): 4,000 rpm, torque: 239 Nm, bar passage: 80 mm, feed rate X-axis: 165 m/min, feed rate Y-axis: 165 m/min, feed rate Z-axis: 220 m/min, overall weight: 10,500 kg, Equipment: documentation/manual, Machine is still in use and can be seen working at VOVU Machining in Uden. In total there are 6 identical machines here. Fanuc 310is controller Itodpour Hfzofx Aanjr

Condition: excellent (used), Year of construction: 2004, Control Siemens Sinumerik 840D Bar capacity 65 mm Speed 5,000 min-1 Itodpfx Aaswh U D Honer 2 x 12-way turret with driven tool Turret 1 with Y-axis Part collection device Belt filter system Chip conveyor Bar loading magazine IRCO Profimat

Condition: good (used), Year of construction: 2001, spindle speed (max.): 12,000 rpm, travel distance Y-axis: 400 mm, rapid traverse X-axis: 300 m/min, rapid traverse Z-axis: 425 m/min, Chiron machining center type FZ 15 W high speed with chip conveyor year 2001 with turntable 12,000 rpm internal cooling. X 300 Y400 Z 425 2 pcs available more pictures can be sent Ijdpfsvtca Usx Aanotr

Year of construction: 2000, condition: used, serial number 143-86 x-travel 550 mm y-travel 300 mm z-travel 425 mm Number of working hours 58046 h cooling Innen nein max. 10.500 nein control Simens Sinumerik 810D weight 4600 kg Itodpfx Aer D Tu Dsansr

Condition: like new (used), functionality: fully functional, machine/vehicle number: 115090324, KITAGAWA POWER CHUCK e.g. OKUMA, MAZAK, MORI Three-jaw chuck with serration. cylindrical holder for spindle flange Spindle mounting flange in scope of delivery KK6 Drawtube connection thread M60x2,0mm currently under investigation Ijdpfx Aaei Hqhqsnetr Jaw interface: 1.5 x 60 ° Weight without clamping jaws approx. 30 kg For further inquiries, we are at your disposal. Shipping costs on request

Condition: good (used), Year of construction: 2006, Spindle 12000 TR:MN CN SIEMENS SINUMERIK 258-38. Number of hours on the counter: 85 642 hours Iteden D D Nhopfx Aanjr total machine power 30 KVA stroke X 300 mm, stroke Y 400 mm, stroke Z 425 mm spindle speed 12000 rpm travel speed 60m/min tool attachment SA40 2 UNITS AVAILABLE

Year of construction: 2004, condition: ready for operation (used), A DMG CNC universal machining center is available. Travel X/Y/Z: 780mm/560mm/560mm, spindle speed: 12000/min, tool places: 60, tool holder: SK40, table: rotary table, milling head: swiveling, pallet capacity: 5, pallet dimensions X/Y: 630mm/500mm, control: Heidenhain iTNC 530, operating hours: 62659h, spindle hours: 38299h. Including rotary pallet changer, BLUM laser, TS 641 3D measuring probe, chip conveyor, 40bar IKZ, 900l coolant tank and Rotoclear. Documentation available. On-site inspection is possible. Iedpfx Aev Exrdoanstr

Condition: refurbished (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: KMM3312068, travel distance X-axis: 800 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, controller manufacturer: SIEMENS, controller model: 840d pl, distance between spindles: 266 mm, number of slots in tool magazine: 21, Equipment: chip conveyor, Vertical double head machining center, partially reconditioned, and fully operational. Iedpetzy Egsfx Aanstr