Used Foil processing machinery for sale (10)

Condition: excellent (used), Year of construction: 2019, operating hours: 1,200 h, Functionality: fully functional, working width: 1,500 mm, total height: 12,000 mm, roll width: 1,600 mm, Extruder for the production of ABC three-layer film. The machine produced a total of 300 tons of film. Capacity of 220 kg/h, equipped with IBC system,TCM gravimetric dosing system,ionizer,screen changers. Rotating tower. Main technical data -max film width 1500 mm -thickness of film 0,02 to 0,2 -max output 220 kg/hour -screw diameters :60 mm, 65 mm, 60 mm -power of main motors 30 kW , 45 kW , 30 kW -material of augers 40CrMoAl -total installed power 180 kW -power consumption 60 kW -control panel -speed control with DELTA inverters -ceramic heaters -three screen changers -pneumatic banana winders -two film winding systems with automatic cut-off Iaelhceukdqfjdw Dew pneumatic -internal IBC balloon cooling system -rotating tower -flattening plates -4kW, 1500mm CORONA ionizer -three pieces of gravimetric dosing system by TCM , ensuring the maintenance of constant film thickness parameters -two mouthpieces with a diameter of 500 mm and 400 mm -basket diameter 1500 mm -construction maximum height 10000 mm

Condition: used, WIDMANN automatic film unwinder, film unwinder Rewinder and unwinder, unwinder, rewinder, winding machine, roll winding machine, roll unwinding machine Unwinder with deflection rollers and film guide system Unwinder with deflection rollers for constant strap tension Year of construction approx. 2000 Ielhcdeud U Sfsw Dsaw Roll width - coil width max. 400 mm Material width max. 400 mm Deflection rollers Ø 80 mm Deflection roller width 430 mm Roll weight - coil weight max. 150 kg Expansion shaft for cardboard core with inner diameter Ø 76 mm (inner coil diameter) Roll outer diameter - coil outer diameter max. 600 mm Interference circle with rotation of the film reel max. Ø 800 mm Reel shaft speed approx. 70 rpm Motor power - drive of the film reel 0.37 kW Mains connection 400 Volt, 50 Hz - Constant belt tension, winding tension via film accumulator with deflection rollers and vacuum shaft - Pick-up shaft with chuck for large rolls with cardboard core inner Ø 76 mm - 8 deflection rollers for film accumulator with constant winding tension, bearing via precise linear guide - Gear motor LENZE with brake to drive the film roll (0.37 kW) - Electrical system not ready for operation, see pictures Space requirement L x W x H approx. 1000 x 1000 x 1900 mm net weight 360 kg good condition

Condition: like new (used), Year of construction: 2021, operating hours: 150 h, Functionality: fully functional, Model DH-001 Package 3900x820x820x1550mm Capacity 180-210pcs/min Islhcsvf Rn Dodw Deaw Power 5kW

Condition: excellent (used), Year of construction: 2007, EBT film making machine Sysmac SYS-PP65 (Blow film extrusion system). Very good condition, very little used. The machine is currently disassembled. Iolhcdwjuibq So Djaw

Condition: good (used), Functionality: fully functional, The subject of sale is a line for the production of laminates by pouring foil onto the laminated material. The lamination process is carried out using an extruder (extruders because there are two pieces) equipped with slotted dies with adjustable outlet width, thanks to which laminates can be produced in widths from 1m to 1.6m. The thickness of the foil that can be produced is 60 microns to 200 microns. The machine is great for combining different materials with each other, you can create various types of technical products according to your predispositions. The line also includes a material accumulator with a welding gun that allows feeding the material without the need to stop the line. The line does not include elements that are marked in red in the photos. The machine can also produce bubble wrap for technical applications. Iaslhcjvkv Hcjdw Dsw If necessary, we can also start the line at the buyer's premises, for an additional fee. The line is fully functional, we recommend it for various laminates. Description of the laminate production line The sales technology is a laminate production line, using the method of casting a film onto another material. The lamination process is carried out using an extruder (there are two extruders) equipped with slotted T-dies with adjustable width, thanks to which it is possible to produce laminates with a width of 1 m to 1.6 m. The thickness of the labels, which can be available from 60 microns to 200 microns, the machine is perfect for dividing various materials that can be created in the type of technical products according to its characteristics. The line also includes an accumulator device with a welded device for feeding material without power to the line. The line does not contain elements that are marked in red in the photos. The machine can also produce bubble wrap for technical applications. If necessary, we can also launch the line at the buyer's premises for an additional fee. The line is fully functional, we recommend it for making laminates.

Condition: excellent (used), Bystronic Type: ERMM180 Thermoplastic applicator Field of application The thermoplastic applicator applies a thermoplastic material to rectangular glass panes rectangular glass panes as part of a production line for solar modules. The plastic forms a seal to a second pane of glass, which is applied in a later step. applied in a later work step. The panes are fed, applied and removed on horizontally running belts/belt conveyors. belts/conveyors. The thermoplastic applicator is a highly technical machine that has to fulfill many requirements with great precision. For this reason, you should only use products (glass, sealant) that meet the specifications on the following pages. the following pages. This helps to achieve high-quality and safe production. production. Performance and connected loads Maximum transport speed: 18 m/min Height of the glass running surface: 1100 mm Height of the applied sealant line: 0.5 to 1.2 mm Maximum width of the applied sealant line: 12.0 mm Required constant pneumatic inlet pressure: 6.5 to 8.0 bar Pneumatic operating pressure: 6.0 bar Compressed air consumption in normal operation: 10 standard liters/min Compressed air consumption when changing barrels: 500 standard liters/min Average energy consumption per hour: 10 kWh Working temperature of the sealant: 110°C to 130°C Ambient conditions and emissions Minimum ambient temperature: +15°C Maximum ambient temperature: +35°C Maximum relative humidity:: 75% Noise level: less than 70 dB (A) Requirements for the drums for the sealant Design: Material lidded container D18 according to DIN 6644 - with base (F1) and smooth outer surface (jacket design, smooth). Ijlhed N Erpscdw Doaw Capacity: 216 liters Inner diameter: 571.5 mm Height: 874 mm Minimum wall thickness: 1.25 mm Machinable glass panes Types of glass Glass panes with a smooth surface can be processed (float glass). Dimensions and weights Smallest dimensions Largest dimensions Geometry 1198 mm 1200 mm Length LS 498 mm 600 mm Width BS 1.8* mm 5.0* mm Thickness DS Thermoplastics based on poly-iso-butylene (butyl) can be processed. The plastic must be flowable in the range of approx. 110°C to 130°C and have a defined viscosity curve. viscosity curve. Only use materials that have proven themselves in practice and that have been approved by the manufacturers of these materials and by Bystronic. by the manufacturers of these materials and by Bystronic for your intended use. intended use. For detailed product descriptions and information on handling, storage and disposal of the plastic disposal of the plastic used can be found in the information sheets and safety data sheets provided by the manufacturers of the plastics. Dimensions of gantry robot with glass conveyor Height x width x depth: 2800 x 1890 x 2735 mm Weight of the gantry robot: 850 kg Weight of the glass conveyor: 1400 kg Drum pump dimensions Height x width x depth: 3320 x 1060 x 1200 mm Weight (without drum): 850 kg Weight (with drum): 1100 kg Height H for drum pump FP1: 4400 mm Height H for drum pump FP2: 4000 mm Control cabinet dimensions Height x width x depth: 2200 x 1800 x 600 mm Weight: 450 kg The applicator was used with the material butyl. Condition: second-hand / used From test laboratory, as good as new condition, only a few operating hours for testing! Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Year of construction: 2020, Condition: new, A fully automated film rewinding machine according to GMP guidelines. Foil rewinding machine type FUM-900 CP This film rewinding machine is used to rewind film rolls that have run in large systems or are not wound with the correct winding tension, and thus to prepare them for further processing. It was designed according to the special pharmaceutical guidelines and for the processing of PVC film. Advantage of our machine: with two separate drives, we can guarantee both right and left winding. Technical details: Width: 1,600 mm Depth: 850 mm Height: 1,100 mm Materials: In contact with the product: 1.4301 / acrylic Performance: up to 120 m / s Speed: infinitely variable Ø film rolls: max. 450 mm Connection: 230 V / 50 Hz Drive: direct current 0.25 kW Iaeljfwfpbshcdw Dew

Condition: used, WIDMANN automatic film unwinder, film unwinder Rewinder and unwinder, unwinder, rewinder, winding machine, roll winding machine, roll unwinding machine Unwinder with deflection rollers and film guide system Unwinder with deflection rollers for constant strap tension Year of construction approx. 2000 Roll width - coil width max. 400 mm Material width max. 400 mm Deflection rollers Ø 80 mm Islhcdju H R Iqsw Djaw Deflection roller width 430 mm Roll weight - coil weight max. 150 kg Expansion shaft for cardboard core with inner diameter Ø 76 mm (inner coil diameter) Roll outer diameter - coil outer diameter max. 600 mm Interference circle with rotation of the film reel max. Ø 800 mm Reel shaft speed approx. 70 rpm Motor power - drive of the film roll 0.37 kW Motor power - drive of the flat film into the vacuum shaft 0.25 kW Mains connection 400 Volt, 50 Hz - Constant belt tension, winding tension via film accumulator with deflection rollers and vacuum shaft - Pick-up shaft with chuck for large rolls with cardboard core inner Ø 76 mm - 8 deflection rollers for film accumulator with constant winding tension, bearing via precise linear guide - LENZE geared motor with brake to drive the film roll (0.37 kW) - LENZE geared motor with brake to drive the flat film into the vacuum shaft (0.25 kW) Space requirement L x W x H 1900 x 1300 x 1900 mm net weight 580 kg Good condition

Condition: like new (used), Year of construction: 2021, operating hours: 250 h, Machine size 1500x1500x1700mm Islovf Rp Iohcdw Deaw Package size 1700x1550x1300mm Capacity 130-160pcs/min Power 3.5kW Finished products size 400x160mm

Condition: ready for operation (used), Year of construction: 2020, A film cutting machine with a handling portal from Trapo is available. Electrical components of the machine are available. However, the controls and the gripper of the handling portal are not available. Ielhcdwet Dppgo Djaw