Injection Moulding Machine

Arburg Allrounder 220S 180/70

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61037337, clamping force: 800 kN, screw diameter: 30 mm, displacement volume: 113 cm³, injection pressure: 2,500 bar, injection weight: 103 g, mold height (min.): 400 mm, ejector force: 22,600 N, ejector stroke: 150 mm, opening stroke: 900 mm, total length: 3,960 mm, total width: 1,480 mm, total height: 2,020 mm, overall weight: 3,550 kg, heating capacity: 10.9 kW (14.82 HP), drive type: Hadraulisch, clear span: 470 mm, tool weight: 10,00,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The fully hydraulic CX series offers a particularly compact, efficient and flexible two-platen machine. The very compact two-platen concept with cantilevered clamp offers generous space for peripheral equipment and excellent accessibility. Efficient and intelligent energy management with BluePower servo drive continues to provide a powerful basis for the highest demands and the right solution for every application. TECHNICAL DATA: KM 80 / 380 CX G06 (order 38655610) CONTROL  MC 6 with 21.5" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 55  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 670 x 670  Tool installation height min. - max. mm 400 (increased by 150 mm)  Opening width mm 900 (increased by 150 mm)  Mold opening stroke max. mm 500  Hydraulic ejector drive  Ejector stroke mm 150  Ejector force forwards/backwards kN 22.6 / 9.8  Ejector speed forwards/backwards mm/s 760 / 800  Max. Mold weight kg 1000 SPRING UNIT  Screw diameter / type mm 30 / standard (customization possible)  Effective Ls/D ratio 26.7  Injection pressure bar 2500  Stroke volume cm³ 113  Shot weight at max. stroke for PS g 103  Injection speed mm/s 100  Injection flow rate cm³/s 71  Screw drive/speed 1/min 295  Plasticizing flow (standard) g/s 12.3  Nozzle contact force kN 50 ELECTRICAL PARAMETERS Connected load kW 15.0  Installed heating capacity kW 10.9  Power supply V / Hz 380 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 3.55 Cgodpfx Aeud N Hded Det  Length x width x height m 3.96 x 1.48 x 2.02 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  1 additional temperature control point for nozzle heating  Air valve 1 - compartment (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Hydraulic core pull 1 - compartment (BWAP)  Euromap interface handling E18, E63  Euromap interface (central computer) E67, E77  Adaptive Process Control (APC)  Injection stamping circuit  Graphic analysis package The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Year of construction: 2026, condition: as good as new (ex-display), Parts cleaning machine / spray cleaning system type TR450 Cgsdpfofbt Sisx Ad Dot The spray rotary cleaning system type TR450 is an automatic cleaning and degreasing system with a cover that can be easily opened upwards. The system is designed for cleaning individual parts and/or bulk goods in baskets measuring LxWxH 520x320x200h mm. The basket must be closed with a lid for the cleaning process. The cleaning result depends on the fact that the parts can be easily circulated in the basket in the case of bulk goods. The fill level in the basket must be observed for this. The system is also equipped with a flood tray under the basket, which enables the parts to be scooped up in a flood, thus achieving an even better cleaning result. including the following equipment: - Completely made of stainless steel 1.4301 inside and out - Level monitoring and automatic fresh water refill - Insulation of the entire system - Hot air drying (output: 11.6 kW) - Steam vapor extraction - Oil skimmer for bath maintenance - Automatic fresh water refill - 1 small parts basket 520x320x200h mm, mesh size: 6x6 mm, incl. height-adjustable lid Connected load: approx. 20 kW (32 amp plug)

Condition: good (used), Year of construction: 1998, Battenfeld 600/200 CDC Unllog 4000 Closing 60 TO Year 1997 Scrow 30 mm Cgjdpeg Emvhjfx Ad Dst Injection weight approx. 90 g

Condition: excellent (used), Year of construction: 1992, Boy 30 T2 Closing 30 tons Year 1992 Cgsdpfx Adeuh U Izj Dst Scrow 32 Spray weighted 123g

Condition: excellent (used), Year of construction: 1992, Shaft diameter: 40 mm Bending capacity: Flat bar edgewise at 500 mm Ø: 60 x 10 mm Flat bar flatwise at 400 mm Ø: 100 x 15 mm Square bar at 500 mm Ø: 35 mm Angle iron, leg outwards at 450 mm Ø: 50 x 50 x 6 mm Angle iron, leg inwards at 600 mm Ø: 50 x 50 x 6 mm T-section, T outwards/inwards at 600 mm Ø: 60 x 60 x 7/50 x 50 x 6 mm Round bar at 500 mm Ø: 35 mm Shaft speed: 7.5 rpm Electrical connection: 380 V, approx. 1.7 kW Codpfx Aox Anpved Dogt Space requirement: 910 x 640 x 1400 mm Weight: approx. 480 kg

Condition: good (used), Year of construction: 2003, operating hours: 1,06,864 h, clamping force: 1,300 kN, screw diameter: 35 mm, The machine was very well looked after, service and maintenance were always carried out on time. Good condition, fully functional Still in use until week 11 Further service reports and documents available Technical data: YEAR OF MANUFACTURE: 2003 Automatic operation: 106,864 h Clamping force: 1300 kN Screw diameter: 35 mm Screw stroke: 180 mm Closing force: 50 kN Cgedpfx Adorp Dyro Dst Opening stroke: 500 mm distance between ejector plates: 750 mm Ejector force: 40 kN Advance package - VE561/20 LGS Position-regulated screw with control valve on the injection unit for particularly high dynamics and reproducibility of the injection process, the back pressure is regulated, the nozzle contact force is manually adjustable - VE 557/00 AES Energy-saving system for automatic performance optimization and corresponding energy energy saving through infinitely variable adjustment of the pump drive speed to the respective power requirement of the spraying cycle - VE 460/00 ED Electromechanical metering drive via a speed-controlled three-phase asynchronous motor to increase productivity through simultaneous movement, through gentler material preparation and corresponding energy savings compared to hydraulic dosing On request, loading and transport (Europe-wide) can be organized for an additional charge. Prices plus VAT Viewing possible by appointment. Please contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Year of construction: 1990, condition: ready for operation (used), Control: Deckel Dialog 11, with vice, an inspection is possible. Cgodpfx Asqi D S Ujd Djt

Condition: like new (used), Year of construction: 2019, Arburg 1200 T 2000-800 (vertical machine with rotary table 1200mm) Clamping unit 2000T Table diameter: 1200mm Angle rotation: 180 degrees Clamping force: 200 tons Opening force max. kN/mm: 115/500 Platen daylight max. : 600 mm Injection unit Screw diameter: 45 mm Shot volume: 318 cm3 Shot weight: 291 g Injection pressure: 2470 bar 1. Model: T model 2. Machine type: 1200 T 2000 - 800 3. Plasticizing unit: Thermoplastics cylinder 45 mm, highly wear-resistant 4. Screw: Reinforced screw coupling for splined coupling geometry 5. Control system: SELOGICA ‘direct’ controller 6. Technology stage: Stage 2 servo-regulated with 2 control pumps 7. Rotary table: Advanced ergonomics special model, 2-station 180° forward/backward alternating 8. Nozzle: Open nozzle 45 mm with nozzle tip 9. In-mould needle nozzles: Electric & hydraulic control for needle nozzle 1, electric & pneumatic control for needle nozzle 2 10. Heating: Heater band for open nozzle, 9 electric heating control circuits for mould heating 11. Clamping platen: Mould mounting platen set, central diameter 125 mm 12. Blow unit: Mould blow unit with pressure reducer at station 1 13. Safety: Optical barrier at loading station, continuous oil cooling and filtration Cgodpewugczjfx Ad Dot 14. Hopper: Adapter (extension) for feed hopper, machine delivered without 50 L hopper 15. Robot interface: Interface for robot system for station 2 & 3 (based on EM67/1) 16. Electric axes: Basic equipment for electric axes control 17. I/O: 4 programmable inputs/outputs on terminal rail 18. Sockets: Additional socket combination (1 CEE, 1 Schuko) 19. Interfaces: Temperature control device interface (REGLOPLAS), printer USB interface, Compact Flash, EUROMAP 65 chip card user authorisation 20. Acoustic alarm: Error alarm acoustic signal 21. Safety interlock: Interface for safety interlock of door (EUROMAP 73) 22. Cooling circuits: 3 regulated machine-related cooling circuits with flow indicator, 3 manually adjustable cooling circuits for second water manifold 23. Anti-corrosion: Anti-corrosion treatment for rotary table, sealing lip on outer diameter 24. Manual & labels: CD operating manual & spare parts list, Slovak language labels 25. Machine feet: Anti-vibration footplates 26. Other: Hydraulic ejector, external cycle start key, standard equipment packages, new ARBURG colour scheme 27. Display languages: IT/EN/SK

Condition: used, Year of construction: 1998, operating hours: 4,500 h, clamping force: 50 kN, displacement volume: 200 cm³, injection pressure: 2,587 bar, overall weight: 2,500 kg, screw conveyor diameter: 18 mm, terms of delivery: FCA Pegnitz Cgsdpjwi Uzhefx Ad Dst delivery time: on request terms of payment: 100% prior to delivery

Condition: new, Please read the technical specifications in full. If you are considering this machine as an investment, we kindly request your complete credentials, including a correct telephone number and email address, in order to submit an offer. Fiber Laser 30W Marking area: 200 x 200 mm Maximum workpiece size (WxHxD): 550 x 450 x 350 mm Laser type: Fiber 30 Watt Wavelength: 1064 nm Maximum marking speed: 7000 mm/sec Z-axis motorized H: 700 mm Repeatability/lens: +/- 0.001 mm Minimum line thickness: approx. 0.01 mm Cgjdpsru E Svjfx Ad Djt Power supply: 240 V / 50 Hz External dimensions: 110 x 80 x 200 cm Front door: manual Including software and PC Can be demonstrated under power on-site Price net, plus VAT