2
Catalog No. : 5641
Type: 50H 500W/ 500 HL 2F
Producer: Engel
Made in: 2000
Characteristic:
Total hours: 81791 h
Clamping force: 5000 kN
Injection capacity: 392 cm³
Min. Height of the plate for mounting the mold: 1480 mm
Min. Width of the plate for mounting the mold: 1300 mm
Distance between the columns (vertical): 950 mm
Bzlgs3stjx
Distance between the columns: 950 mm
Screw diameter: 50 mm
Maximum injection pressure: 1910 bar
Opening the mold: 1200 mm
Weight of the injection molding m...
MACHINE IS EXELLENT WORKING CONDITION AND SUPER CLEAN
INCLUDING ROBOT AND CONVENYORS
MACHINE IS STILL O POWER AND AWAILIBLE IMEDIATELY, FROM GERMANY - DORTMUND AREA
DIRECT FROM THE COMPANY WHO USE IT FROM A NEW.
MACHINE WILL BE DISCONECTION FROM THE COMPANY IN NEXT TWO WEEKS.
Tutiiqvh
FOR THE CUSTOMER WE WILL DISMANTLE AND LOAD MACHINE.
IF CUSTOMER NEED START UP THE MACHINE ON THE SITE WE CAN MADE AN OFFER TO START UP THE MACHINE AND PUT INTO THE PRODUCTION AS WELL.
7
General Data
Measurements width 2810 MM
Measurements depth 11240 MM
Measurements height 2760 MM
Machine weight 37000 KG
Tools
Max weight 11.4 KG
Injection Unit
Screw diameter 70 mm
Shot weight ps 953 g
Stroke volume 1047
Injection pressure 1776 bar
Screw speed 285 rpm
Heating capacity 30 kw
D80uxdj
Clamping Unit
Clamping force 6500 kn
Opening stroke 1150 mm
Mould height min 1350 mm
Size of mold platens 1520 x 1370 mm
Media
Main electronic connection 400 v 50 hz
Pump drive power 110 kw
This ...
4
BATTENFELD HM 6500/5400 / Hybrid machine, high speed
Year of manufacture: 2000
injection unit:
Screw diameter: 95 mm
injection weight: 2950 g
Injection pressure: 1689 bar
Dosing volume: 3012 ccm
clamping unit :
clamping force: 650 t
tie bar distance: 1020x1000 mm
size of clamping platens: 0x0 mm
ejector: hydraulic
clamping unit: hydraulic
control system:
UNILOG 9000
Additional equipment:
Min. tool height: 500mm
max. tool height: 1100mm
Euromap
Robot interface
Core pull x 9
Control with hot runne...
Product description
Clamping force: 1000 ton
Opening force: 40 ton
Pekqr
Mold opening path: 1900 mm
Clear axial distance h x h: 1550 x 1200 mm
Clamping plate distance: 2000x1605 mm
Ejector force: 200 kN
Ejector stroke: 300 mm
Screw diameter: 90 mm
Injection pressure: 2300 bar
Injection volume: 2799 cm3
Shot weight: 2407 g
Control MOSAIC
Core pulls 2 + 2 NG10
Daylight between platens max 1.900 mm
Dimensions (long x wide x high) 11.800 x 3.300 x 2.600 mm
5
1,0 St. gebr. Spritzgießmaschine mit Roboter
By2our0icy
Hersteller: ENGEL
Typ: ES3550/600 HL-V
Baujahr: 2000
Schließkraft: 600 Tonnen
Holmabstand: Holmlos
Schneckendurchmesser: 80 mm
Spritzvolumen: 1.960 cm³
Steuerung: EC100A03
Ausstattung:
-Roboter Hersteller Engel, ERC53/2C
-2,0 St. Kernzüge
3
Bettween tie bar : 700 x 700 mm
Opening stroke : 680 mm
Tikness mold : mini : 555 mm – maxi : 905 mm
Screw diameter : 80 mm
Interface robot
By7qdltbcn
8
Stork S 5500-2150
Year of production: 2002
Brand: Stork
Technical data
Shot Weight: 1,218 g
Clamping Force: 5500 kN
Screw dia: 72 mm
Tie bar distance: 1010 x 1010 mm
Platen size: 1475 x 1485 mm
Mould height min.: 300 mm
Byqfg22lga
Type of controls: CDS-600
Workinghours: 29.000
Language: English,Polish
Power: 190 kW
Weight: 40200 kg
Core pull: Yes
Euromap: Yes
Air valve: Yes
Heating channels: Yes
Toggle calmping unit: Yes
Gas bottle: Yes
5
Injection Unit
Screw diameter 115 mm
Bykzgcu7yz
Injection pressure 1318 bar
Clamping Unit
Clamping force 8000 kN
Ejector stroke 250 mm
Additional Equipment
Hot runners : 20 zones
4 core pull in mobile platen
3 core pull in fix platen
This Krauss Maffei KM 800/5700 MC Injection Moulding Machine was manufactured in the year 2000. It has 78115 production hours. This machine operates with a clamping force 8000 kN, a screw diameter 115 mm, and an ejection stroke 250 mm. It is operated with a contr...
9
KRAUSS MAFFEI KM 500-2700 C2 / production line with KUKA robot / very good technical condition
Year of manufacture: 2006
injection unit:
Screw diameter: 70 mm
Injection weight: 998g
Injection pressure: 2389 bar
Dosing volume: 1097 ccm
clamping unit :
clamping force: 500 t
tie bar distance: 900x800 mm
size of clamping platens: 1270x1200 mm
ejector: hydraulic
clamping unit: hydraulic
control system:
Slccsqd2
MC IV
Additional equipment:
Production line consists of injection molding machine, robot K...
5
ES 4550 - 750
Machine Controller: CC100
Clamping force: 750 ton
Platen Size Horizontal: 1500 mm
Platen Size Vertical: 1410 mm
Distance between tiebars Horizontal: 1025 mm
Distance between tiebars Vertical: 925 mm
Opening stroke: 900 mm
Min. mold height: 400 mm
Max. mold height: 920 mm
Daylight: 1820 mm
Ejector stroke: 250 mm
Screw: 90 mm
Shot capacity: 2481 cm3
Bytb8jg7bf
Shot weight: 2233 g
9
Injection moulding machine Krauss Maffei KM 650 - 3500 C2
Year of manufacture - 2002
Location - Poland
Control type MC 4
Technical details
Closing force 6500 kN
Tool opening force, max. 346 kN
Plate size (H x L) 1620 x 1470 mm
Clearance between columns (H x L) 1000 x 930 mm
mould opening distance 1150 mm
min. mould installation height
Opening width 540 mm 1690 mm
S8yuc9
Ejector stroke 250 mm
Ejector force forward / backward 226 kN
Injection unit
Screw diameter 80 mm
Ratio Ls / D 20
Injection pr...
5
Version L-
Screw diameter : 110 mm- latéral : 30 mm
Shot weight : 3930 g - 94 g
Bettween tie bar : 1050 x 1050 mm
By7pjn3xtw
6 corepulling
6 air valves
24 hot runner
1 rectractable colomn
Electric screw drive
1
NEGRI BOSSI press, closing force 1000 T, with injection unit type 11000, screw diameter 120, injectable volume 6780 cm3, pressure on material 1620 bars
Toggle closure, with between columns 1000 x 1120 mm, opening stroke 1200 mm, mold thickness 500/1200 mm. Equipped with SEPRO robot. Visible in production
Bzfruadm8q
6
Injection Unit
Screw diameter 90 mm
Injection pressure 1742 bar
Clamping Unit
Clamping force 5000 kN
Ejector stroke 250 mm
Jxcve3
Additional Equipment
Number of heating zone 20 zones
2 core pul on moving platen
2 core pull on fix platen
This Krauss Maffei 500 H 3500 C1 Injection Moulding Machine was built in the year 2000. It has 5180 production hours. It is operated with a control unit of the same brand. This machine work with a clamping force 5000 kN, a screw diameter 90 mm, and an ejection...
3
KRAUSS MAFFEI KM 500-2700 C2 / Production line in very good technical condition
Year of manufacture: 2007
injection unit:
Jxeyhy
screw diameter: 70 mm
injection weight: 998g
Injection pressure: 2389 bar
Dosing volume: 1097 ccm
clamping unit :
clamping force: 500 t
tie bar distance: 900x800 mm
size of clamping platens: 1270x1200 mm
ejector: hydraulic
clamping unit: hydraulic
control system:
MC IV
Additional equipment:
Production line consists of injection molding machine, robot Krauss Maffei, con...
7
Engel ES 3550/600K (134)
without hopper
Year of production: 2000
Brand: Engel
Dyjpzu
Technical data
Shot Weight: 1,350 g
Clamping Force 6000 kN
Screw dia: 70 mm
Injection pressure: 2250 bar
Tie bar distance: 915x860
Platen size: 1345x1280 mm
Mould height min.: 310 mm
Power: 160 kW
Weight: 31000 kg
Core pull Yes
Euromap Yes
Toglle calmping unit Yes
10
Injection moulding machine Krauss Maffei KM 800-5000 MC
Year of manufacture - 2000
Control -MC4
Closing force - 800 tons
Screw diameter - 90 mm
Injection volume - 2262 ccm
Injection pressure -2205 bar
Distance between columns - 1120 mm
Platen dimensions - 1600X1510 mm
Min. mould height - 750 mm
Max. mould height -1250 mm
Closing unit:
Closing force - 8000 kN
Iwhgi9n
Minimum mould height - 750 mm
Maximum mould height - 1250 mm
Opening width - 2000 mm
Ejector stroke - -250 mm
Injection moulding m...
15
We offer:
5 x injection moulding machine ENGEL from 80-700 t + control unit and robot in a package.
The injection moulding machines were in operation at the time of the inspection. They are sold due to a business change at our customer. The injection moulding machine includes the control unit, robot and for some of them a deposit conveyor belt for the parts as well as for one of them a rotary table.
The injection molding machine is currently still at the site in Saxony Anhalt.the sale is ex work...
14
10 days left
Capacity 1000 Tonne, Pressure 17.2 Mpa (175kgf / cm2) Stroke 1000mm, Daylight 1750mm, Bolster Area 2700mm x 1500mm, Pull Back Capacity 52.7 Tonne, Ejector Capacity 50 Tonne, Ejector Stroke 18.0mm, Main Motor 415v, 50Hz, 6 P, 110kw, Oil Tank Capacity 1800 Litre, Manufacturer No. 21225, Machine Weight Approx. 120 Tonne, Slide Descending Speed Approx. 200mm / Sec, Slide Ascending Speed Approx. 60mm / Sec, Bolster Moving Stroke Approx. 2300mm, Ejector Capacity 50 Tonne, Ejector Stroke 180mm, Ejector...
15
General Data
Machine weight 38000 KG
Control Unit
Brand ENGEL
Injection Unit
Screw diameter 70 mm
Stroke volume 1193
Injection pressure 2140 bar
Screw speed 183 rpm
Heating capacity 29 kW
Clamping Unit
Clamping force 5000 kN
Btxylgf
Opening stroke 1200 mm
Max open daylight 300 kN
Mould height min 500 mm
This ENGEL ES 2550/500 HL-V Injection moulding machine was made in Austria in 2000. It shows a production record of 78031 hours. It is equipped with a control unit of the same brand. The mach...
4
warehouse no.: 502907
manufacturer: ENGEL
type: ES 5550-800 DUO
controller: EC100 A03
year of construction: 2000
operation hours: 91000 h
technical data clamping unit
clamping force: 8000 kN
distance between tie bars h:: 1170 mm
distance between tie bars v:: 1000 mm
size of mould plates h: 1650 mm
size of mould plates v: 1470 mm
min. mould height: 500 mm
max. mould height: 1100 mm
max. open daylight: 2100 mm
opening stroke: 1600 mm
screw diameter: 90 mm
swept volume: 2740 ccm
injection pressu...
7
Aburg 470C-2000-800
Product Code: 49
Availability: In Stock
Year of production: 2006
Brand: Arburg
Technical data
Shot Weight: 510 g
Clamping Force 2000 kN
Screw dia: 60 mm
Injection pressure: 1380 bar
Tie bar distance: 470x470 mm
Platen size: 730 x 730 mm
Mould height min.: 250 mm
Type of controls: Selogica
Language: Polish
Power: 44,9 kW
Bwwywg9
Workinghours: 57310 h
Weight: 6830 kg
Air valve: Yes
6
EN:
Name: Krauss Maffei KM800MC
Type: KM800MC
Closing unit
Clamping force: 8000 kN
Board dimensions (HxH): 1600x1510 mm
Clear width (HxH): 1120x1000 mm
Max tool opening: 1400 mm
Tool height min./max .:: 600 / 1100mm
Opening length: 2000mm
Ejector force: 228/95 kN
Injection unit: SP4350
Hspdzwv
Screw diameter: 85mm
L / D ratio: 22
Injection pressure: 1953 bar
Injection volume: 2185 cm3
Injection weight: 1988 g / PS
Pump power: 110kW
Heating power: 51 kW
Dimensions and weight:
43 tons
9.98x...
15
We offer:
Injection moulding machine ENGEL ES 4550/700 K Control robot and conveyor belt.
The injection moulding machine can be inspected in operation. It is being sold due to a change of business at our customer. The injection moulding machine includes the robot and the deposit conveyor belt for the parts.
The machine has the following special / additional equipment:
- 8 integrated hot runner control stations
- 3 core pulls with special sequence (core move at ejector front position)
- weekly ti...
15
10 days left
Capacity 830 Tonne, Euromap 8300h-6300. Max HYDR Pressure Clamp 180 Bar, Max HYDR Pressure INJ 180 Bar, Max Power 121/5, 50Hz, 415 volts, Machine Weight 40,000 kg, 1 x Piovan 'C10C' s/n 8AL1021 Year 2002, 1 x Piovan 'F42' s/n 7AL7316, Year 2001, DBT 1200mm, Platen Size 1600 x 1600, 1 x ATM 'ES2000S' Robot with Negri Bosi Dimi EL 2 Plus Control. Approx. Foot Print Height 4500mm x Width 2500mm x Length 11,000mm
Ezcj0wz
7
Injection Unit
Screw diameter 110 mm
Heating capacity 85 KW
Clamping Unit
Vhlptx3r
Clamping force 7500 kn
Mould height min 550 MM
Mould height max 1250 mm
This Husky ELL 750 RS 120/110 Injection Moulding Machine was manufactured in 2000. It has approximately 75000 working hours. This machine can work with an injection power 7500 kN and a heating capacity 85 kW. The pump of this press was replaced in 2018 and in the same year it was overhauled in terms of control and partially in terms of hydra...
4
Angel ES 3550/650
Closing 650 T0
To force up to 725 TO
Ddmlp0n
Year 1996
Tiebars From stand 102.5x92.5
Scrow 90 mm
Sprayed 2230g
Wide tie bars 92,5x102,5
Offer-Details:
Stock-No. 13146
Manufacturer Krauss Maffei
Qsfonlw8
Type of machine KM 800 – 6100 MX
Year 2006
Working hours 68000 h
Controlversion MC 5
Screentext German
Location Eschweiler - Germany
Clamping unit:
Clamping force 8000 kN
Mould opening force, max. 560 kN
Travel force movable platen opening 89 kN
Travel force movable platen closing 92 kN
Size of mould platens (h x v) 1600 x 1530 mm
Distance between tie bars (h x v) 1120 x 1000 mm
Mould opening stroke 1600 mm
Mould height min/m...
2
Type: Engel e-duo 1340/700 pico
Clamping force: 700ton
Daylight max: 1700mm
Bvwf8abmiy
Tie bars HxV:1100x960 mm
Platens HxV: 1510x1440 mm
Screw dia: 60 mm
Injection volume: 740 cm3
Injection rate: 1131 cm3/s
15
We offer:
Injection Moulding Machine ENGEL ES2550H 500W DUO 2F Control CC100 & Robot 3 Axis Seeber
The conveyor belt shown in the photos is no longer available. Alternatively we can offer a conveyor belt MTF GL-HE 250x36x100-150 cm clocked for 900 € net.
The injection moulding machine is sold due to a business change at our customer. The injection moulding machine is ready for operation / conditionally ready for demonstration.
with the following special programs
- tie bar pulling device
- weekly...
13
10 days left
Closing force 320 Tonne Platten size 970mm X 940mm. Distance between columns 630mm x 570mm. Screw dia 70mm. Max Hydr Pressure Clamp 150 bar, Max Hydr Pressure Clamp Inj 180 bar, Max Power 65kw, Negri Bossi CNC control. Machine Weight 12,200kg, Includes 1 x Motan 'HLX10-2-0010-0' Hopper Loader, 1 x ATM 'ES1000' Gantry Parts Loader, 1 x Powered Belt Conveyor. (Approximate Factory Footprint: Height 4500mm x Width 1800mm x Length 7000mm)
Pp0wn
4
General Data
Measurements width 8400 mm
Bxgasd8bqw
Measurements depth 2700 mm
Measurements height 2500 mm
Machine weight 31000 kg
Injection Unit
Screw diameter 90 mm
Stroke volume 495 mm
Injection pressure 3147
Plasticising rate max 114 g/sec
Screw speed 140 rpm
Heating capacity 39.6 kw
Clamping Unit
Clamping force 6377 kN
Opening stroke 700 - 1350 mm
Max open daylight 1800 mm
Distance between bars 1000 x 1000 mm
Ejector stroke 250 mm
Ejector force for / back 182 kN
This LS MTRON WIZ700 Inje...
5
Angel ES 1800/350 HLClosing 350 TO (up to 400TO)Year 1999Scrow 60 mm
B9r0vfky
Offer-Details:
Stock-No. 13147
Manufacturer Krauss Maffei
Type of machine KM 800 – 6100 MX
Year 2006
Working hours 68000 h
Controlversion MC 5
Screentext German
Location Eschweiler - Germany
Clamping unit:
Clamping force 8000 kN
Mould opening force, max. 560 kN
Travel force movable platen opening 89 kN
Travel force movable platen closing 92 kN
Size of mould platens (h x v) 1600 x 1530 mm
Distance between tie bars (h x v) 1120 x 1000 mm
Mould opening stroke 1600 mm
Mould height min/max 500/11...
4
(Immaculate Condition)
Locking Force: 600 Ton
Bnyrzhj
EuroMap : KM 600-3500 C3
Screw Dia: 100 mm
Shot Weight: 2194 Grams
DBTB: 1000 X 850 mm
Clamp stroke appx 1150 mm
Screw stroke 305 mm
CONTROLS: MC4
CORE PULL: 1
AIR CIRCUITS: 1
Working Video will be Available upon request .
6
INJECTION MOULDING MACHINE KM 500 H 3500 C1
Working hours : 51 850 hours
Clamping force : 500 T
Year : 2000
Screw diameter : 90 mm
Miximum injection volume : 1953 cm3
Injection pressure max : 1742 bars
Platen dimension : 1270 x 1200 mm
Distance between tie bar : 900 x 800 mm
Mould min thickness : 480 mm
Opening strocke max : 1170 mm
Distance max between platen : 1650 mm
Ejection stroke : 250 mm
Equipement :
Number of heating zone 20 zones
2 core pul on moving platen
2 core pull on fix platen
H...
14
10 days left
Closing force 700 tonne. Platen size 1410mm x 1310mm. Distance between tie bars 1000mm x 900mm. Max HYDR Pressure Clamp 180 bar, Max Hydr Pressure Inj 180 bar, Negri Bossi CNC control. Machine Weight 27,000kg, Includes 1 x Motan 'HLX-15-2B010-0' Hopper Loader, 1 x Engel Gantry Parts Loader, 1 x Crizaf Powered Belt Conveyor 3900mm x 690mm. (Approximate Factory Footprint: Height 4500mm x Width 2400mm x Length 9400mm)
N0kzsmoh
8
Injection Unit
Shot weight 3687 g/PS
Clamping Unit
Clamping force 7800 kN
Distance between bars 970 x 970 mm
Mould height min 380 mm
Mould height max 975 mm
Media
Main electronic connection 200V / 60Hz
Power consumption 133.1 kW
This BORCHÊ BT780V-II Injection moulding machine was manufactured in China in 2009. It operates with a clamping force of 7800 kN, a shot weight 3687 g/PS and a distance between bars of 970 x 970 mm.
Application Types
Pp2qv
Injection Moulding
11
Angel ES 4450/600HL
Yqtw8
Closing 600 TO
year 1999
Scrow 90 mm
PVC cylinder with extra cutting edge
For PP, PE,...
Spraying weight 2480 cm
Clamping plate size listen. XVer. 1480x1300
Mould height min 500 mm
9
Injection moulding machine Krauss Maffei KM 800-5000 MC
Year of manufacture - 2000
Control -MC4
Closing force - 800 tons
Screw diameter - 90 mm
Injection volume - 2262 ccm
Injection pressure -2205 bar
Distance between columns - 1120 mm
Platen dimensions - 1600X1510 mm
Min. mould height - 750 mm
Max. mould height -1250 mm
Closing unit:
Closing force - 8000 kN
Minimum mould height - 750 mm
Maximum mould height - 1250 mm
Opening width - 2000 mm
Ejector stroke - -250 mm
Injection moulding machine e...
4
Clamping force: 800 ton
Platens size: 1380x1480 mm
Distance between tie bars: 900x1000 mm
Max mold height: 700 mm
Max opening: 1250 mm
Bwrfxlqx9f
Injection pressure: 2185 bar
Injection volume: 1820 cm3
3
• Screwx diameter : 95 mm
• Shot volume : 3367 cm3
• Injection pressure : 1895 bar
• Bettween tie bar Hx V : 1000 x 900
• EMould Tikness mini –maxi : 450-950 mm
• Opening stroke : 930 mm
• Core pulling : 4
• Way Heating :24
• Cascade : 8
• Interface robot : yes
• Retractable Column
• Electric dosingg motor
Bwdjpu0q3r
