Arburg ALLROUNDER 270 S 400-100

Arburg ALLROUNDER 270 S 400-100

Condition: like new (used), Year of construction: 2017, operating hours: 16,000 h, functionality: fully functional, 1,0 St. gebr. Zweikomponenten Spritzgießmaschine Hersteller: ARBURG Typ: 720A3200-800/70 Baujahr: 2017 Schließkraft: 320 Tonnen Holmabstand 720 x 720 mm Einbauhöhe min. /max.: 300 - 800 mm Öffnungsweg: 600 mm Schnecken DN 1: 50 mm Max. Hubvolumen: 392 cm³ Spritzteilgewicht in PS: 359 g Schnecke DN 2: 22 mm Max. Hubvolumen: 34 cm³ Spritzteilgewicht in PS: 31 g Steuerung: Selogica Ncodpfjv S E Dgsx Alhju Technische Ausstattung anfordern.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, working width: 1,700 mm, welding power (max.): 600 kVA, wire diameter (max.): 6 mm, type of input current: three-phase, MG950 Mesh Width (Cross Wire Length) for lower feed, single-row: 200 – 900 mm for upper feed, single-row: 200 – 1700 mm for upper feed, double-row (usable width): max. 1530 mm Mesh Length: max. 3200 mm min. 350* mm Distance between the outermost longitudinal wires: max. 1600 mm Longitudinal wire pitch: min. 20 mm Cross wire pitch: min. 10 mm steplessly programmable Clear opening longitudinal wire: min. 15 mm Clear opening cross wire: min. 8 mm Longitudinal wire diameter: 2.0 – 6.0 mm Cross wire diameter: for lower feed: 1.5 – 4.0 mm Nodpfsym An Aox Alhecu for upper feed: 2.0 – 6.0 mm Longitudinal wire overhang: max. 300 mm, min. 10 mm Cross wire overhang: max. 300 mm, min. 5 mm Number of individual welding groups ESG: 12 Number of portal welding groups PSG18: 12 Max. number of longitudinal wires: 12

Condition: like new (used), Year of construction: 2014, Arburg 320 C 500-170 (2014) Working hours : 44.124 h Clamping force: 50 t Screw diameter : 25 mm Shot weight : 75 g Clamping force: 500 kN Distance between tie bars: 320 × 320 mm Platen size (H × V): 446 × 446 mm Minimum mould height: 200 mm Maximum daylight opening: 550 mm Ejector stroke: 125 mm Screw diameter: 30 mm Maximum shot volume: 85 cm³ Maximum shot weight (PS): 77 g Injection pressure: 2000 bar Screw speed max: 400 r/min Nozzle stroke: 250 mm Nozzle contact pressure: 40.6 kN Heating capacity: 9.4 kW Ncedpjxqdtaefx Alhou Pump drive power: 11 kW Total installed power: approx. 20.5 kW L 3.4 m x W 1.4 m x H 2.0 m Weight :2 400 kg Injection Unit Thermoplastics injection unit, 25 mm screw, high wear-resistant design Standard screw coupling with flat-ended geometry Open nozzle, 25 mm Nozzle tip for open nozzle Heater band for open nozzle Clamping Unit Mounting platen set, central diameter 125 mm Core pull 1, serial movement, holding pressure via check valve Hydraulic ejector Ejector quick-coupling Connector for ejector platen protection

Condition: refurbished (used), Year of construction: 2021, functionality: fully functional, workpiece weight (max.): 800 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 256 mm, GF AGIECHARMILLES CUT 3000X Year of manufacture: 2021 Travel distances: X= 500 mm, Y= 350 mm, Z= 256 mm U/V-axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface finish: Ra: 0.05 µm Available wire diameters: 0.05 – 0.33 mm (incl. KIT 50) Ncedpfxeych Rzs Alhou Submerged-type machine with automatic wire threading With automatically lowering work tank (accessible from 2 sides) Incl. AGIEJOGGER handbox for convenient setup Incl. AGIESETUP 3D Incl. automatic wire changer AWC (use of 2 wire spools) Incl. Conic-Plus option Incl. Fast-Threading option Incl. Smart-Threading option VISION 5 control system AGIE IPG-V generator Dimensions (L x W x H): 2800 x 2400 x 2220 mm Net weight: 4500 kg The machine will be fully cleaned, overhauled, and thoroughly tested after receipt of order. We conduct laser measurement of the axes at our premises. On request, we are also happy to carry out a custom test on the CUT 3000 for you. Includes user training at Techma on your overhauled machine We are happy to optionally offer: - Transport - Commissioning - Chiller unit - Clamping devices - Consumables

Condition: used, Year of construction: 2000, machine/vehicle number: SO117, Used HDPE 4+4 Blow Molding Machine TECHNE SYSTEM up to 2700 bph This HDPE Blow Molding Machine offers a highly specialized system for blow molding containers made of high-density polyethylene (HDPE). This machine handles bottle formats up to 2 liters and produces up to 2700 bottles per hour (bph). Moreover, the system uses a 4+4 configuration, meaning four upper and four lower cavities, which optimize production with a symmetrical and highly efficient design. You can access this machine starting mid-October. Main Technical Features of the HDPE Blow Molding Machine TECHNE SYSTEM To ensure high precision in shaping bottles, the blow molding system provides a cavity spacing of 150 mm. Additionally, the machine includes a double carriage, which allows you to control the production cycle optimally and minimizes downtime. In particular, this Blow Molding Machine accommodates containers up to 2 liters, giving you significant flexibility in producing various types of packaging. Mold Configuration and Flexibility Although the machine does not include molds in its standard supply, it supports a wide range of mold sizes, up to a maximum capacity of 2 liters. Furthermore, you can easily adapt the entire system to meet specific production needs. Upon request, you can also add accessories or make necessary modifications, which we offer at separate quotations. Additionally, our technicians, who manage the disassembly, can reassemble the machine, thereby ensuring continuity and reliability in operations. Manuals and Technical Documentation This blow molding machine comes with complete technical manuals and detailed schematics, which will assist you during installation, maintenance, and daily operations. More specifically, the documentation provides detailed specifications regarding container tolerances and operational schematics of system components. As a result, the design optimizes critical values like bottle spacing and the distance between extruders and the container body. Production and Performance Ncjdpfjvgvkaox Alhou This Used Blow Molding Machine supports production capacities ranging from 2400 to 2700 bottles per hour, depending on operating conditions and container types. Therefore, it allows you to maintain a steady output rate. In terms of precision, the mold-carriage stroke extends to 660 mm, allowing well-calibrated movements that ensure production uniformity. Consequently, the machine can produce bottles up to 290 mm wide and 690 mm tall. Conclusions of the HDPE Blow Molding Machine TECHNE SYSTEM The Used HDPE 4+4 Blow Molding Machine TECHNE SYSTEM up to 2700 bph, available from mid-October, provides a versatile and highly efficient solution for companies that require a high production capacity. Additionally, you can customize the system by adding accessories upon request. As a result, the flexibility in mold configuration allows you to adapt the machine to a wide range of production demands. Lastly, the machine ensures operational efficiency due to its reliability, and the availability of technical support for both assembly and disassembly further enhances its performance.

Year of construction: 2012, condition: good (used), robot 40 RC 200 X= 700mm Y= tandem 1600mm Z= 3320mm B + C Servo year: 2012 Nsdpfx Aogkvtxelhjcu price: 8.900€ contact person: Mr. Rainer Eckerle

Condition: excellent (used), Year of construction: 1998, Engel ES 650W500V/200HL. 2F 2-component machine  Tie-barless  2000 kN clamping force  Screw diameter, aggregate 1: 45 mm, aggregate 2: 45 mm Nsdpfjgrafvjx Alhocu  Max. injection volume, aggregate 1: 226 cm³, aggregate 2: 183 cm³  Installation dimensions, mold: min 250 mm, max 750 mm  Year of manufacture: 1998

Condition: used, Year of construction: 2001, operating hours: 58,764 h, functionality: fully functional, machine/vehicle number: 502748, clamping force: 1,000 kN, screw diameter: 30 mm, clearance between the columns: 420 mm, displacement volume: 144 cm³, injection pressure: 1.905 bar, ejector force: 41 N, ejector stroke: 150 mm, opening stroke: 500 mm, plate length: 590 mm, plate width: 590 mm, installation height: 250 mm, total length: 4,550 mm, total width: 1,450 mm, total height: 2,000 mm, overall weight: 4,800 kg, heating capacity: 9 kW (12.24 HP), pump power: 30,000 W, height adjustment type: hydraulic, stroke length: 150 mm, tool height: 250 mm, tool weight: 7,00,000 g, Equipment: documentation/manual, Demag ERGOtech Injection Moulding Machine ERGOtech 100-420-200 NC4 Year of manufacture: 2001 Asking price: €8,000.00 – WITHOUT Wittmann peripheral equipment The injection moulding machine is in good condition and ready for operation. For sale is the ERGOtech 100-420-200 NC4 injection moulding machine. Optionally, all corresponding Wittmann peripheral devices can be included at an additional charge. We purchased the Demag ERGOtech in 2020 during our company expansion to fulfill a customer order and equipped it with matching Wittmann peripheral devices. The machine has been serviced on-site by a DEMAG service technician and is free from defects. OPTIONAL: We also offer for sale all associated Wittmann peripheral equipment: Peripheral Equipment from WITTMANN BATTENFELD Deutschland GmbH: Nodpfxstltvzs Alhscu Wittmann Tempro Plus D160 – Dual-circuit temperature control unit TEMPRO-PLUS-D-Standard-2-160 DEMONSTRATION UNIT – used, no defects Equipped with: 2 pcs. Reinforced pump TemproPlus D160-1.0kW (2.4A) 60l 1 pc. Ultrasonic flow measurement 140-180° 1 pc. Digital interface 20mA 1 pc. Packaging for temperature control unit Original price: €6,980.00 Sale price: €3,490.00 Wittmann Compact Chiller Coolmax C30 WITTMANN WATER CHILLER SERIES: COOLMAX C30 DEMONSTRATION UNIT – used, no defects Original price: €4,750.00 Sale price: €2,375.00 WITTMANN BATTENFELD Deutschland GmbH Drying and dosing accessories - 1 pc. DRYMAX-PRIMUS: E30-70-M for drying plastic granules - 2 pcs. FEEDMAX-S:3NET for conveying free-flowing plastic granules, hinged lid with integrated collector motor - 1 pc. HOPPER: MT203 machine hopper 203 for mounting a series 200 separator - 1 pc. DOSIMAX: MC 18 dosing unit for free-flowing granulate Condition – NEW – Unused Original price: €8,467.00 Sale price: €4,233.50 All prices are exclusive of the statutory 19% VAT. PLEASE NOTE: The offer does not include relocation or transportation costs for the machine. These services can be offered and organised separately upon request. For further questions, please feel free to contact me at any time.

Year of construction: 2018, condition: ready for operation (used), A compact Arburg injection molding machine is available. Clamping force: 180kN, daylight: 221mm/221mm, platen dimensions X/Y: 400mm/400mm, max. opening stroke: 275mm, min. mold installation height: 150mm, max. platen distance: 425mm, ejector force: 18kN, ejector stroke: 95mm, screw diameter: 15mm, weight: approx. 1900kg, operating hours: approx. 23300h. Documentation available. An on-site inspection is possible. Ncodpfex E Ac Eox Alheu

Condition: good (used), Year of construction: 2010, AWEA 1250, Njdpfxsxu Ew Us Alhocu 15.000 rpm coolant thru spindle, Tool changer 40 places Parts shown by hand not come. Machine vices, plate on table not come with machine.