Atlas Copco MB 1700 Dust Epiroc MB1700 MB1650

Atlas Copco MB 1700 Dust Epiroc MB1700 MB1650

Condition: like new (used), Year of construction: 2005, I sell the vertical band saw mill Primultini SGD, Year 2005, line almost with zero working hours. Canali carriage mechanic + pneumatic. Compressor with air tank included. Iiodpfx Aozkb R Njgyjh Sharpening workshop included. Condition like new. Available immediately.

Condition: used, Year of construction: 1994, Edging machine / Double edger EWD Esterer Model: DK90 TL 1000 Year of manufacture: 1994 Maximum feed width: 1000 mm Maximum cutting height: 120 mm Total of 3 saw blades 2 saw blades adjustable Measurement system: Combimes With S-type conveyor With cross-cut saw With infeed unit Esterer ARS TR With 2-strip chip separator Machine can be fully overhauled upon customer request! Iodpoyam Exsfx Agyjih Already dismantled and ready for loading at any time Location: Austria, near Leoben

Year of construction: 2022, operating hours: 0 h, condition: new, Carrier weight: 20-33 tons Iedpfx Asiwxnvogyeih Operating weight: 1800 kg Oil flow rate: 130-180 l/min Oil pressure: 150-170 bar Chisel diameter: 140 mm Impact frequency, Auto Start / Auto Stop mode: 400-800 bpm Sound power level: 120 db(A)

Condition: used, Esterer DKV double edger Maximum pass-through height: 160 mm Maximum pass-through width: 800 mm Zero line on the right Left-hand machine (adjustable saw blade on the left) with 2 crosscut saws with roller infeed with lath head with sliver separator Iiedpfx Agjy Da Iieyoh with drive motor (45 kW) with control cabinet with saw blades Location: Germany, near Lake Chiemsee

Condition: new, Width: 130 cm Warranty: 6 months Selling price: € 4.500, US$ 4.791 Bucket volume: 1.15 m^3 Machine: CAT320 Bucket Type: Heavy Duty Blade Length: 1300mm Capacity: 1.15m^3 Please contact for detailed information and bucket offers. Isdpfxen Tm Ade Agyeih Bucket production suitable for all brands and models 20 years of bucket production experience

Condition: like new (used), functionality: fully functional, power: 298 kW (405.17 HP), Year of construction: 2022, operating hours: 118 h, Equipment: UVV, Weight: approx. 65,000 kg Max. working height: 28.15 m Extremely sensitive – incredible reach Undercarriage hydraulically extendable to 4.50 meters Engine: Cummins QSG12: water-cooled 6-cylinder engine with Common Rail injection and AdBlue Stage V, 298 kW / 405 hp (2,100 rpm) Hydraulics: Load Sensing, max. 2 x 360 l/min 1st proportional auxiliary control circuit for grapple/hammer on joystick 1 Isdpfszaqp Ujx Agyeih 2nd non-proportional auxiliary control circuit for auxiliary equipment on joystick 2 Safety check valves for boom and jib with overload indicator Quick coupler hydraulic circuit, double-acting Swing brake 2 travel speeds ROPS driver cabin, adjustable Protective grille ISO for roof Protective grille ISO for windshield Boom and arm (supplied with a separate support for transport) Demolition boom and arm (28 m) with intermediate joint (supplied with a separate support for transport) Adjustable undercarriage from 3,340 to 4,500 mm Steel tracks 600 mm Battery main switch Travel alarm and rotating beacon Engine emergency stop switch LED light bar on driver cabin LED spotlights 2x on boom LED spotlight 1x on toolbox 12V socket Document compartment Radio with speakers AUTOMATIC CLIMATE CONTROL Rear view camera 8 x auxiliary circuit flow setting via on-board computer with multi-function monitor Floor mat Cup holder Angle warning for working outside the safety angle (75 degrees) Air-sprung seat with fabric cover and seat heating Fueling pump All-round view camera

Condition: excellent (used), Year of construction: 1988, MEM Cobra 2MT Multisaw 2 movable couplers hydraulically floating saws 2 motors 30kw cutting height 100mm cutting width 900mm Isdpfxemv H Dqs Agyjih 2 hydraulic pumps 15kW and 7.5kW electronic control 4 line lasers High efficiency weight about 8000 kg

Condition: used, Year of construction: 2021, functionality: fully functional, power: 90 kW (122.37 HP), cutting height (max.): 165 mm, cutting width (max.): 1,350 mm, BOARD EDGER AND MULTI RIP SAW VR 1300 S with servo controlled blade positioning • Production year: 2021 • Main motor: 90 kW • Max. board width: 1350 mm • Max. cutting height: 165 mm • Servo-controlled fast blade positioning Ijdpfez D S Ddjx Agyjih • 4 movable saw units with lasers • 3 fixed laser guides • 10" touchscreen control with MEBOR software • Additional 500 mm multi rip saw head with spacers Machine is sold with infeed conveyor. Outfeed conveyor is not included.

Condition: new, The new Pilous double edger DB700Automatik is characterized by the best functionality and long service life due to the solid construction. 3 powered feed rollers made of steel below, 2 revolving pressure rollers with rubber coating above, with control panel 2 return rollers on the machine for easy work processes. 4 rows of anti-kickback technology, multiple emergency stop switches. Developed, built and quality-tested in Europe! Technical datas: Band width 700 mm Cutting height max. 75 mm Cutting height min. 10 mm Side fence 1000 mm Table length 500 mm Minimum cutting width 15 mm Maximum cutting width 520 mm Width adjustment automatic Minimum board length 800 mm Saw blade diameter 2 x 350 mm Kerf 3,2 mm Motor 11 kW Feed speed variable 4 to 18 m/min Optional equipment: Engine power 15 kW, recommended for more than 2 saw blades 2 laser (1 x fix, 1 x adjustable) Table length 2000 mm upper pressure roller made of steel additional saw blade holder (1 pc.) on a fixed unit additional saw blade holder (1 pc.) on moving unit Iiodpfx Agovrvgrsysh

Condition: reconditioned (used), functionality: fully functional, operation weight: 200 kg, Year of construction: 2022, Equipment: hydraulics, EPIROC SB 202 hydraulic breaker overhauled With Lehnhoff MS03 mounting plate Hydraulic hoses with couplings and 1x point chisel Operating weight 200 kg Oil flow 35 l/min - 65 l/min Operating pressure 100 bar - 150 bar Impact frequency 850 - 1800 impacts/min Diameter of insertion tool 65 mm Working length of the tool 300 mm Carrier weight class 2.5 t - 6 t Hydraulic input power, max. 17 kW Iijdpfx Agottv Sxjysh Guaranteed sound power level 118 dB