Condition: good (used), Year of construction: 1993, HENKE VARIANT 140/120, dual-feed machine, year of manufacture 1993, 2 moulds, new control system Iodpfx Aexl S Uhshnoig

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, FOR SALE: COMPLETE ELBA EMC 38 READY-MIX CONCRETE PLANT – 2007 – 4 FRACTIONS – 2 × 50 T SILOS – PLC CONTROL For sale is a complete ELBA EMC 38 ready-mix concrete plant, manufactured in 2007. The equipment is sold as a complete technological system, including a 4-fraction batching system, a conveying belt system, 2 x 50-ton cement silos, automatic PLC control, and a control/office container. TECHNICAL DATA AND EQUIPMENT: • Manufacturer: ELBA • Type: EMC 38 • Year of manufacture: 2007 • Horizontal-shaft mixer with bevel gear drive • Mixer capacity: approx. 0.5 m³ / 500 liters per mixing cycle • Nominal operating capacity: approx. 38 m³/hour • 4-fraction batching system for aggregates • Conveying belt system • 2 cement silos, each with a capacity of 50 tons • Refurbished cement silos • New silo filters • New safety/overpressure valves • The mixer lining is in new condition and very good condition • Automatic PLC control • Control/office container included in the purchase price DISMANTLING, LOADING AND TRANSPORT: The ready-mix concrete plant is sold in a dismantled condition. During dismantling, electrical cables and connections will be marked to ensure that the equipment can be reassembled and electrically reconnected in its new location as clearly as possible. The seller will arrange for the equipment to be loaded onto the buyer’s provided transport vehicles. The organization of transport, the provision of suitable transport vehicles, and all transport costs are the responsibility of the buyer. The equipment is sold in the condition documented in the photographs and with the equipment detailed above. Additional detailed photos, technical information, and videos are available upon request. Location: Hungary Iisdpfx Ajz Db Tzehneg Purchase price: 120,000 EUR + VAT

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1990, operating hours: 10,000 h, machine/vehicle number: 3936990, Equipment: all wheel drive, compressor, emergency stop, hydraulics, Complete MacFab Wet-Cast Concrete Panel Production Line and 29 steel moulds. Comprehensive Mould Package for the production of concrete sectional garages. Alternatively the moulds could be altered to produce products in a variety of sizes, shapes, textures and colours. Iisdpfxszndccj Ahneg Excellent / In Perfect Working order In daily operational use. Available for live operational viewings. Location: United Kingdom Terms: Ex Works (EXW) – Buyer to arrange decommissioning and transport. Overview, An exceptional opportunity to acquire a complete, turnkey precast concrete panel manufacturing setup from industry-leading manufacturer MacFab. This system is not sitting in storage; it is currently in day-to-day production, meticulously maintained, and performing to perfect operational standards. Ideal for an established precast yard looking to rapidly scale capacity, or an agricultural/civil contractor looking to bring high-volume panel manufacturing in-house without the long lead times of ordering new plant equipment. Fully operational hydraulic systems, premium vibration consolidation setup, and robust chassis engineering. Regularly serviced and completely reliable. 29 Heavy-Duty Steel Moulds Included: A massive inventory of robust commercial steel panel moulds engineered for high-cycle wet-cast production. Excellent face-side finish quality and squareness. Complete Turnkey Solution: Includes all necessary integrated controls and ancillaries to begin pouring immediately upon reassembly Zero Operational Risk: Buy with 100% confidence. Because the machine is in active use, buyers can verify hydraulic integrity, vibration consistency, and overall cycle efficiency first-hand. Massive Mould 29 commercial steel moulds independently represents substantial capital expense and manufacturing lead time. This package provides immediate scaling capability. Live Video / Inspections Available: Serious buyers are invited to visit the facility to see the machinery running in real-time. PRICE £59950.00 Plus VAT 70270 Euros (Open to sensible offers for a swift transaction) Sold Ex Works (EXW).

Condition: used, Year of construction: 1994, An on-site inspection is possible. Isdoz Aggyepfx Ahnoig

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 2,000 h, AMV 7450D SHOTCRETE ROBOT – DISMANTLED SHOTCRETE APPLICATION UNIT – 2012 For sale: a professional, dismantled AMV 7450D Shotcrete Robot application unit, designed for wet-mix shotcrete application. The unit was manufactured by the renowned Norwegian company AMV Andersen Mek. Verksted AS, which specializes in the design of machinery for tunnel, mining, and underground operations. IDENTIFICATION DATA: * Manufacturer: AMV Andersen Mek. Verksted AS, Norway * Model: AMV 7450D Shotcrete Robot * Year of unit manufacture: 2012 * Serial number: 12-0070 * Year of base vehicle manufacture: 2012 * Original chassis: Mercedes-Benz Actros * Type: mobile shotcrete robot * Application technology: wet-mix method * Number of operators: 1 * Operating voltage: 400 V AC * Permissible/technical weight as indicated on the AMV nameplate: 44,500 kg – parameter related to the complete machine configuration * Current condition: unit is dismantled from the chassis KEY OPERATIONAL PARAMETERS: * Maximum concrete pump output: up to 25 m³/h * Vertical reach of the boom: approximately 13.7 m * Horizontal reach of the boom: approximately 13.7 m * Working material: shotcrete * Operating method: wet-mix shotcrete application * Working system: specialized tunnel boom with spray nozzle * Unit power supply: 400 V AC * Water tank: capacity to be confirmed * Operating pressure of the system: to be confirmed based on technical documentation * Actual weight of the dismantled unit: to be confirmed DEVICE DESCRIPTION: The AMV 7450D is a specialized shotcrete robot designed for efficient and precise application of concrete in challenging underground environments and on large infrastructure projects. The extended working boom allows for shotcrete application at height and in hard-to-reach locations that are inaccessible to conventional concrete pumps. The output of up to 25 m³ of concrete per hour enables efficient execution of large areas and work requiring rapid ground stabilization. The machine is designed to be operated by a single operator. This solution reduces the number of workers in the immediate shotcrete application zone, improving safety and control over the process. Iiodpfozw T Sxex Ahneg * construction of concrete tunnel linings, * shotcrete application in road and railway tunnels, * mining and quarrying operations, * reinforcement of underground excavations, * securing rock walls and ceilings, * ground stabilization after excavation, * reinforcement of shafts and underground chambers, * construction of subways and other underground structures, * stabilization of slopes and embankments, * execution of landslide protection measures, * geotechnical works, * protection of foundations and deep excavations, * reinforcement and repair of concrete structures, * repair of dams, canals, and other hydraulic structures, * protection of rock surfaces against spalling, * work on hydroelectric power plants and technical tunnels, * execution of specialized infrastructure contracts. The equipment is intended primarily for tunnel, mining, geotechnical, construction, and hydraulic companies, as well as companies engaged in the repair and modernization of specialized AMV machinery. Additional photos, videos, nameplate photos, and information regarding the included equipment can be provided. Please feel free to contact me for further information and to arrange a viewing.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1994, machine/vehicle number: 1032, FBH 1200 Machine Track gauge 1710 mm, equipped with rubber wheels FBH 1200 mobile, fully automatic vibropress for the production of hollow blocks, bricks, as well as blocks. Iisdpfx Ahjyf Uazonsg *Output / 8 hours / 100%: 12,000 pcs hollow blocks. The step-by-step production line for small-size precast elements manufactures various concrete components on a smooth concrete surface, typically outdoors. The machine moves automatically during production. Above the production area, a power supply system is installed to provide power to various devices. The step-by-step FBH 1200 vibropress is supplied with concrete via a feed hopper designed for use with a forklift truck. The manufactured components remain at the production site until dry. Production area: 1100 x 1050 mm Height of produced elements: up to 380 mm A palletizer can be purchased for an additional fee—see last two photos.

Condition: used, functionality: fully functional, fuel type: diesel, color: blue, Year of construction: 2005, Advertisement for a rebar bending machine for culverts and pipes. In good condition (fully functional). Iedpfx Ahjy Uffnsnjig €50,000

Condition: refurbished (used), functionality: fully functional, power: 15 kW (20.39 HP), gearing type: automatic, fuel type: electric, color: yellow, overall weight: 3,900 kg, maximum load weight: 12,000 kg, Year of construction: 2010, operating hours: 1 h, number of axes: 2, FIBO B1200 on chassis – recently overhauled The compact and mobile concrete mixing plant FIBO B1200 impresses with its high performance, short setup times, and reliable concrete quality. Thanks to its integrated chassis, the plant can be used flexibly – ideal for construction sites, concrete plants, agriculture, precast concrete production, or temporary production sites. ✅ Recently overhauled – in excellent technical and visual condition ✅ Silo & cement screw conveyor completely new (optional) ✅ Ready for immediate use Technical features: Mixing capacity: up to approximately 10–20 m³/h (depending on the mix design and operating mode) Chassis for easy transport and quick relocation Control system for automated batching High repeatability and consistent concrete quality Robust design – ideal for continuous and construction site operation Side wall extensions for increased volume in the aggregate hopper High-pressure cleaner permanently installed Admixture pump New price: CHF 230,000.- Iedpfx Aszcrbwshnoig Advantages: No complex foundation required Very fast commissioning (production can start 1/4 hour after unloading) Low operating costs Ideal for small to medium concrete volumes The plant is perfect for companies that want to produce concrete in a mobile, flexible, and independent manner. Condition: Complete overhaul performed (documents available) Including electronics and control system Silo NEW (optional) Cement screw conveyor NEW (optional) Technically inspected and fully operational Upon request, inspections, test runs, and transport can be arranged.

Condition: used, functionality: fully functional, color: orange, Year of construction: 2003, Paving machine in good condition (fully functional), Iijdey Ufgfspfx Ahneg 2003 €50,000

Condition: used, Applicable material: Concrete POLYGONMACH 120 M3/hour stationary concrete batching plant is one of the high capacity stationary concrete batching plants. These plants are used to produce high quality concrete for large construction projects and infrastructure activities. POLYGONMACH 120 M3/hour fixed concrete batching plant has a capacity of 120 m3/hour and operates fully automatically. Concrete mixing, conveying and unloading processes are fully automatic. In addition, these plants have special designs that facilitate the production of high quality concrete. They give superior results in factors such as concrete strength, quality and homogeneity. These power plants are often used for large-scale construction projects such as large bridges, dams, hydroelectric power stations, highways and shopping malls. Due to their stability, they guarantee on-time delivery and high productivity. POLYGONMACH 120 M3/h stationary concrete batching plants are also known for their environmental friendliness. They have low energy consumption and low emission levels. Therefore, they are the preferred solution in sustainable projects around the world. Iodpfxjx D A Snj Ahneig Thanks to these features, POLYGONMACH 120 M3/hour stationary concrete batching plants are a frequently preferred option in the construction industry. Different types of mixers can be used in POLYGONMACH 120M3 concrete batching plants. 1. Rotary mixer: Rotary mixers work by rotating the drum while mixing the concrete. These mixers are suitable for both small and large-scale jobs and provide high performance. 2. Static mixer: In static mixers, fixed systems are used instead of parts to be held together to mix the concrete. These mixers may cost less but perform less well Mobility: stationary Other characteristics: automatic, special Capacity: 120 m³/h(4,237.76 ft³/h)

Condition: used, Applicable material: Concrete POLYGONMACH PSC240 240 m3/hour is the production capacity of a stationary concrete plant that can produce 240 cubic meters of concrete per hour. Fixed concrete batching plants are designed to produce high volume concrete used in the construction industry. Projects where this concrete is used are generally large construction projects and require high strength, long life, environmentally friendly and high quality concrete. Stationary concrete batching plants are equipped with automatic or semi-automatic control systems to increase production efficiency and quality and are available in various capacities. A concrete batching plant with a capacity of 240 m3/hour can be an ideal production capacity for medium and large scale construction projects. The type of sand aggregate to be used in the 240 M3 stationary concrete plant may vary according to the requirements and conditions of the project to be used in the production of concrete. The sand aggregate to be used should meet the properties required by the concrete, especially in terms of granulometry. Sand aggregates are generally used for concrete types between M20 - M150 and should have properties such as bonding, durability and stability. Generally, round, angular or flat sands can be used in a concrete plant. For example, round grits hold less water and are easier to work with, while angular grits absorb more water and increase bonding strength. Flat sands, on the other hand, can be used in accordance with the fine details of the concrete. The appropriate type to be selected for sand aggregate should be determined according to the characteristics of the project, concrete quality and durability. Mobility: stationary Iiedpfsx D Dcuox Ahnog Other characteristics: automatic Capacity: 240 m³/h(8,475.52 ft³/h)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1989, Complete concrete block production line Manufacturer: Schlosser Control system completely renewed in 2019 Iisdpfx Asy Sin Uohnjg Production of paving stones, grass pavers, etc. Drying unit Palletizing system

Condition: ready for operation (used), Year of construction: 1984, Three nearly identical Eirich intensive concrete mixers are expected to be available from January 2027. Years of manufacture: 1974/1974/1984, Volume: 500l, Max. filling weight: 655kg, Mixing pan speed: 36rpm, Rotor speed: 130rpm, Rotor tool diameter: 880mm. Documentation available. An on-site inspection is possible. Iodpfx Ahozi Eitsneig

Condition: excellent (used), Year of construction: 2002, Planetary mixer Skako 1500/1000 1m3 ready concrete with skip Iisdpfx Ahjy D Td Dsnsg year 2002 very good condition

Condition: used, Applicable material: Concrete POLYGONMACH PSC100 100 m3/hour stationary concrete batching plant is a concrete batching plant that can produce 100 cubic meters of concrete per hour. It is preferred in large construction projects due to its high capacity. Stationary concrete batching plants are a complex system that includes components such as concrete mixers, cement silos, water meters, aggregate weighing systems and control panels. The 100 M3/h stationary concrete batching plant requires a larger space requirement than the smaller capacity stationary concrete batching plants and is usually specially designed for high-rise construction projects. Iisdpsx D Ddlefx Ahnog The advantages of POLYGONMACH 100 m3/h stationary concrete batching plant are: 1. High capacity: 100 m3/hour fixed concrete batching plant is a high-capacity plant that can produce 100 cubic meters of concrete every hour. 2. Production of quality concrete: Stationary concrete batching plants are designed to produce high quality concrete. Therefore, a 100 m3/hour stationary concrete plant also produces high quality concrete. 3. Labor saving: 100 m3/hour fixed concrete batching plant reduces the number of workers and lowers labor costs. 4. Time saving: Fixed concrete batching plants speed up the production and distribution process of concrete and shorten the completion time of projects. 5. Less waste: Stationary concrete plants produce exactly the amount of concrete needed, therefore reducing the amount of waste and being environmentally friendly. 6. Less operating costs: Fixed concrete batching plants reduce operating costs and are more economical than other production methods. Mobility: stationary Capacity: 100 m³/h(3,531.47 ft³/h)

Condition: used, Applicable material: Concrete Cargo space capacity: 60.000 l Polygonmach single shaft mixers has been designed for ready mix concrete nad other type of concrete types prodcution from c10 to c40. Its robust helical design enables its low problematic, low maintenance necessity, low abbrasion rate, longlife span. Ijdpfx Ahex Dzb Ijneig Paddles, pallets and helical arms made from ni-hard 25mm width, body and side wearing plates made from 10mm hardox 400 plates. Discharge covers are controlled by pneumatic or hydraulic which can be managed by Scada-PLC software. From 0,5 to 2 m3 capacity is available. Polygonmach single shaft mixers offers its customers with automatic lubrication systems, easy lubrication bar to multiple points, top cover for several applications. Polygonmach in contrast to competitors gives you %100 flexible design and customer based projectsü, multiple hopper and mixer design is available. Motor type: hydraulic Mobility: truck-mounted Other characteristics: automatic, single-shaft Capacity: Max.: 2 m³(70.6 ft³)Min.: 0.5 m³(17.7 ft³) concrete plant

Condition: used, Applicable material: Concrete Capacity: 30 m^3/h Site type concrete batching plants has been issued for easy installation and easy legal procedures. Site batching plants consist of aggregate hoppers, from 2 to 8 pcs differant aggregate can be used such application, belt onveyor or skip hoist to transfer material from hoppers to mixer, mixing section, pan,planetery,twin shaft, single shaft or cone mixer, weighing section. Site type concrete batcing plant is for very fast location changer customers. After once installation you will never ned to disassembly iy again due to 4.5 full operation height. With 0,75m3 planetery mixer; Polygonmach site plants are best for small scale operations and all type of concrete you need. Site type plant a kind of mobile type plant however it has got shipment price advantages, all site type plant set consist of concrete transfer belt conveyor, cement silo can go with single container around the world. With axles, towing hook make it easy to trasnport in hours. Portable batching plants,concrete plants, mixers are used to prepare precious dosed material by pneumatic cylinders and clamshell outlets, afterwards the material is weighed by weighing bin under hoppers. The material has been consisted of sand and aggregate(0-4mm, 4-8mm, 8-16mm, 16-32mm or similar). For excise material transfer procedure, belt conveyor. The sand and aggregate is waited before discharge to mixer. Additonally, there is weighing bin at top of mixer which consist of cement weighing scale/hopper, water hopper, liqued addtive hoppers. After sand and gravel discharged into mixer, cement, water,additive, sand and gravel is mixed on recipe based the mixing time chnages as per recipes. Mobility: mobile Capacity: 45 m³/ Iiedpox Dx Dyofx Ahnog

Condition: used, Applicable material: Concrete Capacity: 160 m^3/h POLYGONMACH PSC160 160 M3/hour stationary concrete batching plant can be preferred due to its many advantages. The following reasons explain why you should prefer a 160 m3/hour stationary concrete batching plant: 1. High capacity: 160 m3/hour fixed concrete batching plants provide high capacity concrete production. This allows them to be used in large construction projects, infrastructure activities and other activities that require high volumes of concrete. 2. Production of quality concrete: High quality concrete is very important for the strength and durability of the concrete structure. 160 M3/h stationary concrete batching plants are designed to produce high quality concrete, which allows safe, durable and quality structures to be built. 3. Efficient operation: The automatic 160 m3/hour fixed concrete batching plants speed up the activities and reduce the labor costs. Thanks to automatic dosing systems, the right amount of ingredients is added, which increases the efficiency of the business. 4. Environmentally friendly: 160 m3/hour fixed concrete batching plants offer environmentally friendly features. Low energy consumption and low emission levels help less harm to the environment. 5. Cost-effective: 160 m3/hour stationary concrete batching plants have low operating costs despite their high capacity. This can contribute to large projects that cost less and provide a longer duration of action. Ijdpex D Dcnefx Ahneig As a result, POLYGONMACH 160 m3/hour stationary concrete batching plants are preferred due to their high capacity, high quality concrete production, high efficiency and environmentally friendly features. Mobility: stationary Other characteristics: automatic Capacity: 160 m³/h(5,650.35 ft³/h)

Condition: used, Applicable material: Concrete POLYGONMACH PMC150 150m3 mobile concrete batching plant is a mobile concrete batching plant used to produce large quantities of concrete in large construction projects. These power plants are portable and rebuildable, can work with a wide range of materials and can be used for many construction projects due to their mobility. The following steps are recommended to use the POLYGONMACH 150m3 mobile concrete batching plant effectively: 1. Correct positioning: The switchboard should be installed at the easiest access point possible. It must be securely located and engineers must ensure primary resources are in place. 2. Personnel: Plant operators must be experienced and trained to ensure the best results in construction projects. Employees should be trained regularly and use appropriate protective equipment to work inside the plant. 3. Maintenance: Regular maintenance ensures longer life and efficient operation of the plant. This can reduce disruptions and prevent irregularities in mobile switchboard operations. 4. Production: In addition to their productivity, 150m3 mobile concrete batching plants have technologies that enable the production of high quality concrete. Therefore, it is important to use the right concrete mix to ensure efficient production every time. 5. Storage: The produced concrete should be stored correctly and well protected until the time of use. Ideal storage conditions will ensure safe handling and trouble-free use of concrete. Mobility: mobile Isdox D A Icspfx Ahneig Capacity: 150 m³/h

Condition: used, Applicable material: Concrete Make of engine: Audi Capacity: 60 m^3/h The POLYGONMACH PSC60 60 m3 stationary concrete batching plant is capable of producing 60 cubic meters of concrete per hour. These types of stationary concrete batching plants are designed to produce high-quality concrete, primarily used in large-scale construction projects. Stationary concrete batching plants comprise a complex system that includes components like concrete mixers, cement silos, water scales, aggregate weighing systems, and control panels. They come in various capacities and are chosen based on the project's needs. The POLYGONMACH 60 m3/h stationary concrete batching plant has many advantages, some of which are: High Capacity: The 60 m3/h stationary concrete batching plant, capable of producing 60 cubic meters of concrete per hour, is ideal for use in large projects. Quality Concrete Production: Stationary concrete batching plants are designed to produce high-quality concrete. Hence, the 60 m3/h stationary concrete batching plant also produces high-quality concrete. Labour-saving: Stationary concrete batching plants reduce the number of workers, thus cutting down labour costs. Also, the stationary nature of the plant eliminates time and costs of relocation. Time-saving: Stationary concrete batching plants speed up the process of concrete production and distribution, thereby shortening project completion time. Less Waste: Stationary concrete batching plants produce the exact amount of concrete needed, thus reducing waste and being environmentally friendly. Lower operating costs: Stationary concrete batching plants cut down operating costs and are more economical compared to other production methods. Isdpjx D Dhdefx Ahneig Mobility: stationary Capacity: 60 m³/h(2,118.88 ft³/h)

Condition: ready for operation (used), Year of construction: 1995, A complete stationary concrete block production plant Adler is available. Components: stationary block machine/press unit, mixer, skip/feeding unit, material hopper, conveyor belts, height conveyor, pallet circulation system, pallet transport, palletizer, stacking and destacking units, strapping system, control system, hydraulic unit, silo, material feeding system, dosing unit, discharge. Output: 1500 cycles/day, output: 3000 pallets/h, operation: double-pallet operation, available concrete block format X/Y/Z: 500mm/200mm/250mm. The drying racks are made of wood and can no longer be used. The system has not been operated for 20 years and requires an overhaul. The system was operated from 1995 to 2005. Documentation available. An on-site inspection is possible. The system is located in Portugal. Iisdszh Ng Tjpfx Ahnsg

Condition: used, functionality: fully functional, Year of construction: 1988, 1 Unit Used Concrete Batching Plant Manufacturer: Liebherr Type: Mobilmix 60 Year of Manufacture: 1988 Iodpfsy Hia Tsx Ahneig Output: approx. 55 m³/h (compact concrete at 30 sec. mixing time) Aggregate Storage 4-compartment inline silo 2 × 30 m³ + 2 × 40 m³ Mixer Liebherr ZE 1000/1500 Equipped with moisture probe / moisture measurement system Weighing / Dosing System Aggregates via weighing conveyor: max. 2,500 kg Cement scale: 250 kg Water scale: 250 liters Cement Silos 3 × 60 tons – Manufacturer: Kurz 1 × 60 tons – Manufacturer unknown Control System Gedis Operator Station-Control container Additional Equipment Partial enclosure included Admixture container included Available immediately Location: Ludwigslust / Northern Germany Offer is net, ex works (EXW) from current location Subject to prior sale Errors and/or misstatements excepted Sold as seen, without warranty or guarantee - Any reproduction, reuse, publication, or copying of this offer, in whole or in part, is strictly prohibited.

Condition: used, mileage: 1,001 km, gearing type: other, color: grey, first registration: 01/2005, Year of construction: 2005, driver cabin: other, Vehicle location: Bovenden, Structure: Stetter concrete mixing structure AM7FHC approx. 7m³ on Dautel interchangeable system ACCESSORIES INFORMATION WITHOUT GUARANTEE, changes, prior sale and errors reserved! - . Iodpevy A Rmefx Ahnoig

Condition: used, mileage: 1,001 km, gearing type: other, color: white, first registration: 01/2009, Year of construction: 2009, loading space volume: 7 m³, driver cabin: other, Vehicle location: Bovenden, steel body Body: Liebherr HTM 704 F concrete mixer body, 7m³ on a Notter (CH) swap body system, in mint condition. Also available with a matching MAN 26.480 BL-6x4 H-4 (Hydro) vehicle for an additional charge. ACCESSORIES INFORMATION IS SUBJECT TO GUARANTEE. Subject to change, prior sale, and errors! - . Ijdpswkvpvefx Ahnjig

Condition: ready for operation (used), Year of construction: 1998, A stationary Hess concrete block step tilting mold machine is available. Production area X/Y: 750mm/1500mm, production height: 300mm, board dimensions X/Y/Z: 1700mm/550mm/300mm, board material: aluminum, number of boards: 290, vibration stations: 2, vibration station type: HFZ 2500, vibration force: 89.5kN, available mold types: block step chamfer/block step Ortenau/deep curb, control system: Siemens PLC. Including transport conveyor with 180° turning device and two lifting devices, lifting ladder, transfer car, lowering ladder, board discharge, board cleaning and board buffer. The compact external vibrators were converted to load vibrators. This is a complete system with peripheral and conveyor units. Documentation vorhanden. An on-site inspection is possible. Iijdsy Rtg Sjpfx Ahnsg