Generator set

Atlas Copco QAS 45 KD S5 Valid inspection, *Guarantee! Diesel,

Condition: used, Year of construction: 1994, The emergency power generator was rarely used; it was connected to the heating system, which is why it does not have a water cooler. There are a total of 2 units available; the price is for 1 unit. Redpfxsxdc Ehj Ag Nep

Year of construction: 2012, condition: ready for operation (used), An Autobond laminating system for sheet-shaped and heat-resistant products is available. Laminating speed: 60m/min, min. sheet dimensions X/Y: 285mm/320mm, max. sheet dimensions X/Y: 1060mm/1060mm, paper thickness range: 90g-650g/m², min. laminating film thickness: 24µm, max. roller pressure: 6t, max. temperature pressure water unit/control: 140°C/135°C. Machine dimensions X/Y: approx. 4000mm/1600mm, weight: approx. 2000kg, operating hours: 28785h. Documentation available. An on-site inspection is possible. Rodpfxsxbrw Us Ag Nep

Condition: used, operating hours: 20 h, Fuel type: Diesel Redpfx Aouu Df Dog Nop

Condition: excellent (used), Herringbone Gear Generator MDV 2000 MDV 2000 Characteristics: Max wheel diameter: 2000 mm Min wheel diameter: 50 mm Redjfx Ibnopfx Ag Njp Max module: 12 Min module: 3

Condition: used, New Diesel Generator Set, Power Generator, Emergency Generator DAEWOO Rsdpfx Agox Srv Io Nep Model DAGFS 100 New, unused Rated Power: 100 kVA Continuous Power: max. 80 kVA Standby Power: 110 kVA / 88 kW Rated Current: 33 Amp. Voltage: 400/230 Volt, 50 Hz 230 Volt, 50 Hz Fuel Consumption: 135-liter tank capacity for up to 8 hours of operation at 75% load Fuel consumption at 75% load: approx. 16 liters/h Fuel consumption in standby: approx. 7 liters/h Drive Engine: Diesel inline engine RICARDO type R6105AZD Engine Power at 1500 rpm: 100 kW Engine Power at 1800 rpm: 110 kW Tank Capacity: 135 liters - Simple and compact design with sound-insulated metal enclosure - Forklift pockets for easy and safe forklift handling - 3x CEE 16 Amp sockets (3-pin, 230 Volt) - 1x CEE 32 Amp socket (5-pin, 400 Volt) - Terminal blocks for cable power connection to external consumers, e.g. construction site power distributor - ATS module for mains backup operation, automatic emergency power switchover in case of power failure - 2 starter batteries, 12 Volt, for 24 Volt starter Required space: L x W x H 2700 x 1050 x 1430 mm Weight: 1400 kg Brand new machine from stock

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, 2 identical machines available, year of manufacture 2021. The machines were only operated for a short period in test mode in a large warehouse, then professionally dismantled and stored. Therefore, they remain in very good, fully functional condition. Full documentation for the machines is available. The XF / XP 111 M is a fully automatic strapping machine with a top-mounted sealing unit. It was designed to vertically strap a high volume of pallets of varying sizes with PP or PET strapping. This system is reliable, easy to operate, and can be installed in confined spaces thanks to its compact dimensions. - For PP and PET strapping Rjdpfx Agow Htz Io Nop - Vertical strapping - Tension up to 5,500 N - Siemens PLC S7 - Compact design, minimal space requirement - Easy access to all mechanical components - Simple operation via touch screen The machines have been properly dismantled and stored – they are available immediately. Additionally, 90 brand-new rolls of original Cyklop strapping material, still sealed in their original packaging, are also optionally available.

Condition: good (used), Year of construction: 1990, machine/vehicle number: 5211, Offer 24289 Technical data: - max. cutting width 3060 mm - max. cutting capacity at 45 Kp/mm² 4 mm - Cutting angle 1.50 ° - Cutting gap - adjustment via adjusting screws - Number of hold-down devices 15 pcs - Stroke rate 23 to 43 /min Rjdpfx Aet Ucgajg Nsp - Front angle stop - Motorized backgauge position-controlled 15 - 850 mm - Cutting line lighting - E - foot switch - Drive 400 V / 7.5 kW - Space requirement approx. W 3900 x H 1600 x D 2400 mm - Weight approx. 4.5 t

Condition: used, Year of construction: 1999, operating hours: 3,400 h, machine/vehicle number: 261724855, TRACTOTECHNIK GRUNODRILL 10S year: 1999 Working hours: Reading - hole diameter: max. 385 mm - maximum torque: 2500 kN - tractive force 96 kN Redpohd I S Ujfx Ag Nep - compressive force 65 kN - max. drilling length 250 m - power: 90 kW - drill rods and bits included - complete equipment with separate engine, hydraulic power pack and tank for drilling fluid - engine Perkins 119 kW / 162 PS This offer is subject to change, input errors and mistakes excepted. Only the concrete agreements in the order confirmation or in the sales contract are valid. The basis for this contract are exclusively our General Terms and Conditions (GTC). These are available on our homepage at any time or can be requested from us. Place of jurisdiction is Eberswalde, Germany. If you have any questions, please do not hesitate to contact me More Information Intended use: Construction,

Condition: used, Year of construction: 2012, operating hours: 105 h, power: 70 kW (95.17 HP), total length: 2,800 mm, total width: 1,400 mm, total height: 1,950 mm, Empty weight: 1.350 kg Current frequency: 50 Hz Rjdpsyiltkofx Ag Njp Voltage: 400

Year of construction: 1986, condition: used, machine/vehicle number: 153, Technical data Manufacturers: Leitz Year of construction: 1986 Maximum workpiece weight: 1000 kg Mass X = 1800 mm Y = 1000 mm Z = 1000 mm Accessories Measuring software: QUINDOS 7 Machine control: B1 control serial port COM The machine can be upgraded to customer specification with new software. Price: On request! Setup and commissioning possible! We can make you a detailed offer! Note: Our offer is aimed exclusively at professionals! (Changes and errors in the technical data, information Rodec Ucbzspfx Ag Nop and prices and subject to prior sale!)