Second-hand machinery for sale (2,407)

Condition: reconditioned (used), Year of construction: 2008, operating hours: 51,776 h, Functionality: fully functional, laser power: 5,000 W, sheet thickness aluminum (max.): 12 mm, sheet thickness steel (max.): 25 mm, working range: 3,000 mm, workpiece weight (max.): 900 kg, New resonator from Trumpf 07/2022: only 6,085 laser hours and 3,376 beam switch-on time Bid submission obliges to pick up on time until 13.12.2024! No minimum price - guaranteed sale at the highest bid! TECHNICAL DETAILS Travel: 3,000 x 1,500 x 115 mm workpiece weight: max. 900 kg Control: Sinumerik 840D Laser power: max. 5,000 W Wavelength: 10.6 µm Sheet thickness aluminum: max. 12 mm Sheet thickness steel: max. 25 mm Sheet thickness stainless steel: 20 mm MACHINE DETAILS Total length: 11,100 mm Total height: 2,600 mm Total width: 4,600 mm Total weight: 12,000 kg Djlju S Am Toq Ai Rgocg Total load activation time: 51,776 h Total beam activation time: 28,467 h Laser switch-on time before resonator change: 45,691 h Beam switch-on time before resonator change: 25,091 h Laser switch-on time after resonator change: 6,085 h Beam switch-on time after resonator change: 3,376 h EQUIPMENT - Cooling unit - Safety light barrier - Standard equipment Closed machine frame with integrated laser unit Automatic pallet changer Longitudinal conveyor belt for small parts and waste Drives: Gantry drive in combination with linear direct drives Cutting head quick-change device Laser cutting head with 250 mm lens Programmable cutting gas selection and pressure setting Capacitive height and process control (ControlLine) AutoLas Plus (FocusLine) Laser power control Position laser diode Hi-Las high-pressure cutting (NitroLine) Sprintlas (FastLine) ContourLas (ContourLine) PMS plasma sensors (PlasmaLine) Lens monitoring (LensLine) Automatic sheet metal outer edge detection Microweld Automatic nozzle cleaning Oil spraying device Work area lighting Automatic switch-off Safety devices - multi-beam light barriers, encapsulated beam guidance Multi-chamber extraction system Compact dust extractor ToPs 100 lite RJ-45 network connection 3.5-inch floppy disk drive TFT color screen - Special accessories PCS Process Control System - PierceLine

Condition: reconditioned (used), Year of construction: 1999, Functionality: fully functional, turning length: 750 mm, turning diameter: 380 mm, spindle speed (max.): 3,800 rpm, Main spindle re-bearing - 0 operating hours TECHNICAL DETAILS Turning diameter: 380 mm Turning length: 750 mm Control: Manual Plus Heidenhain Spindle bore diameter: 45 mm Main drive motor power: 11 / 9 kW Main spindle speeds: 3,800 rpm MACHINE DETAILS Machine weight: 1,900 kg Machine dimensions: 2,400 x 1,600 x 1,900 mm Operating hours: 0 h (main spindle re-bearing) On time: approx. 28,600 h Dcjlov Hp D Heq Ai Rgjg EQUIPMENT - Cycle-controlled lathe with electronic handwheels - Collet holder 173 E - 3-jaw chuck SCHUNK Rota S plus D = 250 mm - Follow-on steady rest - Fixed steady rest - Cooling water system with chip tray - various accessories, tool cabinet, new wear parts - PARAT 25x25 steel holder system with one holder - operating instructions

Condition: ready for operation (used), Year of construction: 2007, Functionality: fully functional, turning length: 900 mm, rotational speed (max.): 5,000 rpm, controller model: Siemenes 840D, Equipment: chip conveyor, TECHNICAL DATA Control: Siemens 840D Main spindle speed: 5000 rpm Subspindle speed: 5000 rpm Center distance: 900 mm Travel paths Turret slide 1 (XYZ): 165 / 420 mm, Y: +50 / -30 mm Turret slide 2 (XYZ): 165 / 420 mm Turret slide 3 (XYZ): 165 / 640 mm Turret system Number of turrets: 3 Tool holder: VDI30 Number of driven tools: 12 ATC Dcjlq Aov E Hk Ioi Rgog MACHINE DETAILS Total weight: 10,500 kg EQUIPMENT - Y-axis - Driven tools - Chip conveyor - Top XF 375 bar loader (BX06121026), built in 2007 Tools and clamping devices are not included

Year of construction: 2009, operating hours: 5,387 h, Condition: ready for operation (used), Functionality: fully functional, No reserve price - guaranteed sale at the highest bid! The bid obliges the buyer to collect the item on time in week 12. Functions: sawing, notching, milling, drilling, tapping, milling TECHNICAL DETAILS Number of controlled NC axes: 14 Processing length: 7,500 mm Max. travel speed X / Y / Z: 60 / 60 / 30 m/min Rotation A-axis: ±110°, continuous Rotation C-axis: ±220°, continuous Tool holder: HSK-63F Tool dimensions milling cutter / drill (max. d/l): Ø 50 mm / 200 mm Tool dimensions disc milling cutter (max. d): Ø 500 mm Speed range: 1 - 24,000 rpm Milling motor power: 16 kW Number of places in the tool magazine: 16 Number of special tool positions: 2 Automatic positioning of the clamping blocks: Yes Number of clamping blocks: 8 Dcjlq Aiov H Awys Rgsg Profile systems with quick-change system: Yes Processing features Max. cross-section W x H / length of single bar processing: 400 x 300 / 7,500 mm Min. cross-section W x H / length of single bar processing: 30 x 30 / 300 mm Movement: Tool Max. number of profiles per machine configuration: Up to 8 profiles (depending on the individual bar length) Number of profile fixed stops: 2 Moving the clamping blocks during 2 processing steps: Automatic Steel processing (up to 5 mm wall thickness): Yes Electronics / software equipment Machine PC processor: Yes Control panel with display and keyboard: 19" touch TFT color display Machine operation based on Windows® with menu navigation: Yes In-house programming without NC/CNC knowledge: Yes Schüco CAM can be installed on office PC (processing visualization): Yes MACHINE DETAILS Dimensions: 15 x 4 x 5.5 m Weight: 12 t On time: 20,616 h Spindle time: 5,387 h

Condition: ready for operation (used), Year of construction: 2000, Functionality: fully functional, machine/vehicle number: 02.291.00, installation height: 950 mm, distance table to ram: 700 mm, retraction force: 450 t, pressing force: 100 t, oil tank capacity: 200 l, No minimum price - guaranteed sale at the highest bid! TECHNICAL DETAILS Pressing force: max. 1,000 kN Retraction force: max. 450 kN Clamping plate size: 850 × 1,100 mm Installation height: 950 mm Max. installation height (steps 100 mm): 1,150 mm Ram stroke without swivel device: max. 700 mm Ram stroke with 90° swivel device: max. 700 mm Ram stroke with 180° swivel device: max. 1,000 mm max. possible ram stroke (steps 100 mm): max. 1,200 mm Mold weight: max. 5,000 kg Load of the upper clamping plate: max. 2,500 kg Load of the tilting device: 3000 kg Tilting angle: 65° Positioning accuracy Plane parallelism: 0.02 mm/1,000 mm Horizontal positioning accuracy: 0.04 mm Closing speeds Closing speed: max. 50 mm/s Delq Aiju Szzcj Rgocg Opening speed: max. 50 mm/s Standard carriage speed: max. 50 mm/s Increased carriage speed: max. 200 mm/s Swivel-off speed standard: max. 50 mm/s Swivel speed increased: max. 180 mm/s Tilting speed standard: max. 50 mm/s Increased tilting speed: max. 100 mm/s Hydraulics Closing system pressure: max. 190 bar Opening system pressure: max. 200 bar Injection unit Pressure: 4-10 bar Volume: 3 l Ejector Table ejector force: max. 35 kN Ejector stroke table: max. 130 mm Ejector movement table: max. 100 mm Ejector force ram: max. 48 kN Ejector stroke ram: max. 150 mm Die cushion Die cushion force: 250 kN Size: 550 x 750 mm MACHINE DETAILS Connected load: max. 10 kVA Drive power: max. 7.5 kW Tank capacity: 200 l Machine weight: 8,500 kg

Condition: like new (used), Year of construction: 2021, Functionality: fully functional, inner diameter: 250 mm, module thread tooth pitch (max.): 8, outer diameter: 300 mm, For the production of internally and externally toothed cylindrical gears and other rolling profiles and shapes that regularly occur on the cylindrical workpiece circumference, as well as for the production of profiles using the single part process. incl. robot automation: coordinated Fanuc robot for loading and unloading TECHNICAL DETAILS CNC control: Siemens SINUMERIK 840 D sl External toothing: 300 mm Internal toothing: 250 mm Largest workpiece orbital diameter: 450 mm Nominal machine module: 8 mm Largest toothing width: 100 mm Shaping spindle stroke rate range Special version: 85 - 850 rpm Spindle diameter: 95 mm Mounting: HSK-B80 taper Distances and adjustment ranges Smallest pitch height of the hydrostatic inclined guide: 400 mm Smallest/largest distance between tool and workpiece axis: -70 / +230 mm Stroke position adjustment range (manual): 75 mm Stand lateral offset range: ±25 mm MACHINE DETAILS Weight of the machine: approx. 7,000 kg CONTROL AND DRIVE Delsvdtx Nsq Ai Rgecg CNC control: Siemens SINUMERIK 840 D sl Control group: NCU 720.3PN with PLC 317-3PN/DP Drive system: SINAMICS S120 (digital drive technology) Measuring systems: - Absolute encoders for linear and rotary axes (except endless rotary axes) - Incremental measuring systems for C-axis NC axes: - Spindle stroke drive (A) - Workpiece rotation (C) - Tool rotation (C2) - Radial axis (X) shank and tool table Max. Shaping spindle speed: 12 rpm Max. Table speed: 300 rpm Max. Table torque: 220 Nm Table bore: diameter 150 mm, depth 253 mm Free support diameter: 365 mm (4 T-slots, M12 threaded holes) Radial drive: Max. Feed speed: 3,000 mm/min COOLING AND LUBRICATION SYSTEM Coolant tank capacity: approx. 550 l Cutting wheel cooling lubricant delivery rate: approx. 150 l/min Magnetic chip conveyor: - Nominal width: 230 mm - Discharge height: approx. 900 mm Lubrication and hydraulic system Tank volume: approx. 160 l Number of pumps: 2 (lubrication, hydraulic and hydrostatic) POWER SUPPLY Operating voltage: 400 V Control voltage: 24 V DC Frequency: 50 Hz Total connected load: approx. 25 kVA PROGRAMMING Standard dialog program: plain text operator guidance (German, English, Italian) Program functions: Single-cut cycle Multi-cut cycle (max. 3 cuts) Dimensional corrections Linear or degressive infeed EQUIPMENT 1 basic machine(s) AM 250 1 power clamping device 1 main column intermediate plate (150 mm high) 1 special ram head 0 - 110 mm stroke length 1 HSK-B80 tool holding cone 1 counter column with fixed counter support arm 1 counter column intermediate plate (100 mm high) 1 set of vibration isolators at no extra charge 1 Electronic handwheel 1 Extended software for fault diagnosis at no extra charge 1 Internet diagnostics system 1 Flow monitor 1 Flushing gun 1 150 mm diameter pipe socket 1 counterholder tip - rotating 1 draw tube and attachment bush AUTOMATION: 1 standard interface 1 Internal flushing of clamping top parts 1 Automatic loading door

Condition: excellent (used), Year of construction: 2017, operating hours: 16,193 h, Functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, rotational speed (max.): 15,000 rpm, number of slots in tool magazine: 38, swivel angle A-axis (min.): -139 °, swivel angle A-axis (max.): 91 °, swivel angle C-axis (max.): 360 °, A similar machine was recently successfully auctioned! Bidding obliges the buyer to pick it up on time by March 31, 2025! TECHNICAL DETAILS X-axis travel: 850 mm Y-axis travel: 700 mm Z-axis travel: 500 mm Control type: Heidenhain TNC 640 Rapid traverse linear X-Y-Z: 35 - 35 - 35 m/min Linear acceleration X-Y-Z: 6 m/s² Linear feed force X-Y-Z: 7,000 N Max. jaw width: 625 mm Workpiece dimensions Max. diameter: Ø 650 mm Max. height: 500 mm Interference circle (A-axis) in 0° position: Ø 885 mm Spindle data Speed: 15,000 rpm Power/torque: 20% duty cycle, 20 kW / 173 Nm Tool holder: SK 40 Tool interface Type: SK 40 Magazine positions: 38 pieces Chip-to-chip time: approx. 6 s Tool length: max. 300 mm Tool diameter with adjacent position occupied: Ø 80 mm Tool diameter without adjacent position occupied: Ø 125 mm Tool weight: max. 8 kg Magazine load: max. 152 kg Swivel rotary table Clamping surface: Ø 650 x 540 mm Centering hole: Ø 32 H7 Swivel range: +91° / -139° Drive type C axis: worm Speed of swivel axis A: 25 rpm Speed of rotary axis C: 30 rpm Table load One-sided drive: 600 kg Accuracy according to ISO 230-2 Deviation (A in X-Y-Z axis): ≤ 0.006 mm Cooling system (IKZ) Standard tank capacity: 122 l Cooling lubricant tank capacity: max. 570 l at 40 bar Pressure: max. 40 bar Flow rate: 11/27 l/min Mains connection (IKZ): 400 V / 50/60 Hz Power consumption (IKZ): up to 20 kVA Filter: police filter, paper belt filter Operating pressure Hydraulic pressure: 120 bar Compressed air: 6 bar Lubrication system: minimum quantity grease lubrication MACHINE DETAILS Control switch-on time: 24,403 h Machine switch-on time: 23,349 h Program run: 16,193 h Spindle time: 13,916 h Weight: approx. 9.5 t Mains connection Voltage: 400 V / 50/60 Hz Delev Hmdqjq Ai Rgocg Power consumption: up to 30 kVA EQUIPMENT - BLUM measuring probe - BLUM tool laser measurement - Extendable chip drawer - Swivel rotary table - Chip flushing gun - Emulsion mist extraction - Scraper belt conveyor - Blow-off device - Blowing air through the center of the spindle - Manual cabin door - Manual cabin roof - Polycarbonate safety windows - Electrical heat compensation from Heidenhain. - Electrical manual control module from Heidenhain.

Condition: ready for operation (used), Year of construction: 2011, operating hours: 14,500 h, Functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 610 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 40, 5-axis simultaneous universal machining center TECHNICAL DETAILS Control: HEIDENHAIN iTNC 530 x-path: 850 mm y-path: 500 mm z-path: 610 mm Rotary table: 400 mm Dslq Aov Hpt Iei Rgscg Spindle speed: 12,000 rpm Drive power - spindle motor: 17/10 kW Tool changer: 40-fold Spindle holder: SK 40 MACHINE DETAILS Machine weight: 7.7 t Total power requirement: 28.5 kW Space requirement: 3 x 2.70 x 3.2 m Switch-on hours: 38,000 Spindle hours: 14,500 EQUIPMENT NC rotary swivel table Ø 400 mm 3D infrared measuring probe electric handwheel chip conveyor blast air through spindle IKZ 40bar rinsing gun direct measuring system

Condition: excellent (used), Year of construction: 2014, Functionality: fully functional, machine/vehicle number: AA2/003019, travel distance X-axis: 4,250 mm, travel distance Y-axis: 2,780 mm, travel distance Z-axis: 240 mm, number of slots in tool magazine: 10, TECHNICAL DETAILS Condition: Very good condition, little used Postprocessor: Available for Fusion360 CAM Machining size: 3,660 x 2,200 mm X-axis travel: 4,250 mm Y-axis travel: 2,780 mm Z-axis travel: 240 mm Movement speed Dcjlq Ai Rjv E Hapegjg X-axis rapid traverse: 70 m/min Y-axis rapid traverse: 60 m/min Z-axis rapid traverse: 15 m/min Spindle and tool holder Electro-spindle motor power (S1): 8.5 kW Number of tool holders: 10 (without tools) MACHINE DETAILS Dimensions (L x W x H): approx. 7,000 x 6,000 x 2,700 mm Weight: approx. 5,500 kg Safety devices: Light barrier and barrier grid CE certificate: available Vacuum pumps: not included

Condition: ready for operation (used), Year of construction: 2003, operating hours: 60,457 h, Functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, controller model: Siemens SINUMERIK 840 D Powerline, rotational speed (max.): 15,000 rpm, TECHNICAL DETAILS X-axis: 600 mm Y-axis: 560 mm Z-axis: 560 mm Control: Siemens SINUMERIK 840 D Powerline Rapid traverse speed: 60 m/min Spindle system Speed range: 1 - 15,000 rpm Tool holder: HSK-A 63 Dcolq Ai Rsv E Ibnogsg Internal coolant supply: Form AD with vacuum rotation filter VRF 250/1250 Tool changer & magazine Tool magazine: Plate Capacity: 90 places NC rotary table & pallets NC rotary table: 360,000 x 0.001° Number of pallets: 2 Pallet size: 400 x 500 mm (similar to DIN 55201-A2) Cooling system & chip handling Cooling lubricant system: Tank capacity 500 L High pressure pump: 60 bar / 19 l/min (pressure levels adjustable via H addresses) Coolant temperature control: Yes Measuring probe: RENISHAW MP 10 MACHINE DETAILS Operating hours: 60,457 h Switch-on time: 120,080 h EQUIPMENT - Additional control panel at the loading station of the tool magazine with LCD display, 5 soft keys and numeric keypad - Drill breakage control (via laser) with basic software, if breakage is detected the machine stops. - Pallet changer with energy supply (hydraulic workpiece clamping) - Pressure adjustment on the NC rotary table (50 - 240 bar) - High-pressure cooling with pressure increase to 60 bar - 3D path control - Speed increase through look-ahead technology & dynamic pre-control - Sludge cart for sludge removers - Special pallet similar to HDM with 50 mm hole grid and 2-way energy connection

Condition: good (used), Functionality: fully functional, Year of construction: 2018, operating hours: 1,685 h, load capacity: 3,000 kg, lifting height: 9,000 mm, fuel type: diesel, mast type: telescopic, Equipment: all wheel drive, No UVV-relevant defects! Place of use: indoor, outdoor and off-road use TECHNICAL DETAILS Lifting height: 9.60 m Max. reach: 6.50 m Max. load capacity: 3,000 kg Load capacity at full reach: 1,000 kg Mast type: extendable Fuel type: diesel Engine: diesel MACHINE DETAILS Transport dimensions (L x W): 4.60 x 2.10 m Clearance height: 2.02 m Own weight: 7,100 kg EQUIPMENT - 4x4 all-wheel drive - Off-road tires Deljv D Itbsq Ai Rgscg - All-wheel steering - Cabin with heating

Condition: good (used), Year of construction: 2005, Functionality: fully functional, feed length X-axis: 200 mm, feed length Y-axis: 200 mm, feed length Z-axis: 100 mm, workpiece spindle speed (max.): 90,000 rpm, controller model: Bosch Rexroth MTX, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Area of application: Hard machining Control: Bosch Rexroth MTX Working area Axes: 6 axes X1,Z1, X2 & Z2: Hydrostatic axes B1: Workpiece spindle Dcsljv E Rkroq Ai Rgsg P01: Internal loader Dimensions working area: 200 x 200 x 100 mm Spindle & tools Number of work spindles: 1 (1x internal grinding, 1x external grinding) Number of tools: 2 Tool holder: External wheel max. Ø500 mm, internal wheel for high frequency spindle Speeds Workpiece: max. 1,375 rpm External grinding wheel: max. 1,375 rpm Internal grinding wheel: max. 90,000 rpm (high frequency spindle) MACHINE DETAILS Machine dimensions (LxWxH): 3.9 x 2.7 x 2.62 m Machine weight: 6,050 kg EQUIPMENT - Part handling: Manual or with Baumann loader - Exhaust air: Extraction system from LOSMA - Units: Hydraulic and hydrostatic oil supply - Cooling unit for hydrostatics and high-frequency spindle

Condition: excellent (used), operating hours: 55,000 h, Functionality: fully functional, laser power: 3,000 W, sheet thickness aluminum (max.): 4 mm, sheet thickness steel (max.): 8 mm, workpiece diameter (max.): 140 mm, New laser unit in 2021. TECHNICAL DETAILS Material and workpiece sizes Round tube: 12 mm - 140 mm Delq Aiju U Eyns Rgjcg Square tube: min. 12 x 12 mm - max. 120 x 120 mm Rectangular, oval, semi-oval, elliptical tube: min. 10 x 12 mm - max. 140 x 100 mm Standard material: steel, stainless steel, aluminum alloys (others on request) Loading and unloading system Loadable bar length: 3,200 - 6,500 mm Bundle loader loading capacity: 4,000 kg Unloading length: 3,500 - 4,500 - 6,500 mm Control and drives Controlled axes with digital drive: No. 8 LT722D - No. 9 LT823D Digital CNC control: Siemens 840D Machining capability Max. machinable profile weight: 15 kg/m Cutting thickness steel: 8 mm Cutting thickness stainless steel: 5 mm Cutting thickness aluminum: 4 mm laser Laser hours: approx. 55,000 h Laser unit replaced: 2021 for 55,000 EUR The system is equipped with a Rofin Sinar Slab laser from the DC series, which enables optimum cutting quality with low consumption thanks to the following features - High beam coefficient (K > 0.9 - 0.8) - No moving parts, therefore very low maintenance costs - Minimal gas and power consumption

Condition: ready for operation (used), Year of construction: 1998, operating hours: 19,162 h, Functionality: fully functional, machine/vehicle number: 1108 000002 3, travel distance X-axis: 600 mm, travel distance Y-axis: 525 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 12,000 rpm, swivel angle B-axis (min.): -90 °, swivel angle B-axis (max.): 90 °, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS X-travel: 600 mm Y-travel: 525 mm Z-travel: 500 mm Control system: HEIDENHAIN Head swivels: ±90° Work table Table clamping area: 1,000 x 543 mm Table load: max. 350 kg Spindle Spindle mount: SK 40 Standard: DIN 69871 Spindle speeds (infinitely variable): 20 - 12,000 rpm Feeds and rapid traverse Feeds X/Y/Z axis: 20 - 10,000 mm/min Rapid traverse X-axis: 18 m/min Rapid traverse Y-axis: 18 m/min Rapid traverse Z-axis: 15 m/min MACHINE DETAILS Total power requirement: 26 kVA Machine weight: approx. 4.2 t Machine dimensions (L x W x H): 2.95 x 2.1 x 2.26 m Coolant system: yes On time: 24,220 h Dslev Exhxeq Ai Rgscg Spindle hours: 19,162 h Any visible vices, tool holders and chucks are not part of the scope of delivery!

Condition: ready for operation (used), Year of construction: 2017, Functionality: fully functional, tank capacity: 1 l, controller manufacturer: Siemens, TECHNICAL DETAILS Filling volume: 0.1 - 1.0 liters Filling medium: for example sauces, dressings, spirits, dressings or mayonnaise Filling method: below-level filling to reduce foam formation Performance: 6,000 bottles per hour (at 250 ml) Filling stations: 16 Closure elements: 4 Control: Siemens Container compatibility: plastic and glass bottles Direction of travel: left to right EQUIPMENT - Filler - Capper - Cap sorting unit Dcelov Hp Swoq Ai Rgjg - Cap feeder

Condition: good (used), Year of construction: 2004, Functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller model: Siemens 840D Powerline, spindle speed (max.): 18,000 rpm, TECHNICAL DETAILS X-axis: 600 mm Y-axis: 700 mm Z-axis: 600 mm C-axis swivel angle: 360° Control type: Siemens 840D Powerline Spindle system Doljv E Hz Hjq Ai Rgecg Spindle speed: 18,000 rpm Tool holder: HSK-A 63 (according to DIN 69893) Tool changer & magazine Tool changing device: Horizontal Magazine type: Chain magazine Capacity: 120 tool positions NC rotary table & pallets Pallet carrier: Integrated Number of pallets: 3 x (530 mm x 500 mm) Cooling system & measuring technology Coolant tank: 500 L IKZ: Form AD Measuring probe: Heidenhain TS 641 (infrared) Tool measurement: Blum Laser (tool length & diameter measurement horizontal/vertical) MACHINE DETAILS Machine dimensions (LxWxH): 4,500 x 2,300 x 2,790 mm Total weight of the machine: 8.2 t Transport dimensions: 2.9 x 2.6 x 2.3 m Transport weight: 6.5 t Tool magazine: 1,300 kg (240 x 190 x 220 cm) Chip conveyor: 540 kg (440 x 60 x 170 cm) Cooling lubricant system: 950 kg (220 x 140 x 220 cm) EQUIPMENT - B-axis available - Automatic swivel milling head - Rotating pallet changer - 3D path control - Hydraulic connection for clamping hydraulics on the pallet (pipe screw connection 2 x G1/4") - Pallet and program management ("LPC") for Siemens 840 CPL - Software adaptation for pressure level control (40-240 bar in the work area, max. 150 bar at the setup station) - E-Plan & documentation in German

Condition: ready for operation (used), Year of construction: 2006, Functionality: fully functional, machine/vehicle number: 14705, temperature: 42 °C, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Capacity: 12,000 bottles/hour Temperature range: 0-42 °C Equipment: Heat exchanger Ipros VT20V-12/CDSC-16 CE marking: Yes Voltage: 400 V Frequency: 50 Hz Power consumption: 8 kW Packaging form: Custom-made pallet Dcslqsvnbr Ee Ai Rgjg Overall dimensions (metric): 5,000 x 2,500 x 1,800 mm - 2,000 kg

Condition: ready for operation (used), Year of construction: 1998, operating hours: 56,210 h, Functionality: fully functional, machine/vehicle number: 888138, pressing force: 234 t, travel distance X-axis: 600 mm, working length: 3,060 mm, stroke distance: 365 mm, TECHNICAL DETAILS Pressing force: 2,300 kN Working length: 3,060 mm Max. stroke: 365 mm Max. operating pressure: 305 bar Follow-up time: 53 ms Safety distance: 84 mm Working area Installation height, max. distance between lower edge of punch and upper edge of die holder: 535 mm Inclined position of pressure beam: ± 10 mm Free column passage: 2,690 mm Thrust: 410 mm Table width: 200 mm Working height at 100 mm tool usable height: 1,050 mm Speeds Y-axis rapid traverse: 200 mm/s Y-axis working speed: 11 mm/s Y-axis retraction: 135 mm/s X-axis: 500 mm/s R-axis: 300 mm/s Accuracy Position deviation Y-axis: 0.01 mm Position deviation X-axis: 0.04 mm Position deviation R-axis: 0.08 mm Travel range stop area Y-axis stroke: 365 mm Travel range X-axis: 600 mm Max. stop range in X: 860 mm Travel range R-axis: 250 mm MACHINE DETAILS Length: 3,660 mm Width: 2,310 mm Height: 3,095 mm Weight: 18,210 kg Operating hours: 56,210 h Electrical supply Voltage: 3x 400 V Nominal current: 60.5 A Frequency: 50 Hz Connection power: 37.0 kVA Control voltage: 24 V Compressed air connection: 6 bar Dcolq Asv E E Raoi Rgog Suspensions and transport Suspension holes: diameter 80 mm Distance to top edge: 150 mm Thickness of side plate: 80 mm Transport weight: 17,700 kg

Condition: ready for operation (used), Year of construction: 2005, Functionality: fully functional, machine/vehicle number: 61007465, clamping force: 3,000 kN, screw diameter: 55 mm, clearance between the columns: 630 mm, injection pressure: 1,904 bar, injection weight: 476 g, opening stroke: 820 mm, Including robot - Wittmann W 731 X-axis: 800 mm Y-axis: 1,400 mm Z-axis: 4,000 mm TECHNICAL DETAILS Clamping force: 3,000 kN Mold opening force (max.): 160 kN Moving platen pusher force (opening): 86 kN Djlq Ajvzrp Iji Rgjcg Moving platen pusher force (closing): 68 kN Mold platen size (H x V): 995 x 1,050 mm Column spacing (H x V): 630 x 630 mm Mold opening stroke: 820 mm Minimum mold height: 330 mm Maximum clear height: 1,150 mm Injection unit Screw diameter: 55 mm L/D ratio: 20 Injection pressure: 1,904 bar Injection volume: 523 cm³ Injection weight (PS): 476 g Injection rate: 428 cm³/s MACHINE DETAILS Machine dimensions (L x W x H): 5.97 x 2.04 x 2.36 m Total weight: 12.5 t

Condition: ready for operation (used), Year of construction: 1998, operating hours: 17,785 h, Functionality: fully functional, machine/vehicle number: 1108 000006 3, travel distance X-axis: 600 mm, travel distance Y-axis: 525 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 12,000 rpm, swivel angle B-axis (min.): -90 °, swivel angle B-axis (max.): 90 °, No reserve price - guaranteed sale at the highest bid! Dcslq Aev Exgzsi Rgjg TECHNICAL DETAILS X-travel: 600 mm Y-travel: 525 mm Z-travel: 500 mm Control system: HEIDENHAIN Head swivels: ±90° Work table Table clamping area: 1,000 x 543 mm Table load: max. 350 kg Spindle Spindle mount: SK 40 Standard: DIN 69871 Spindle speeds (infinitely variable): 20 - 12,000 rpm Feeds and rapid traverse Feeds X/Y/Z axis: 20 - 10,000 mm/min Rapid traverse X-axis: 18 m/min Rapid traverse Y-axis: 18 m/min Rapid traverse Z-axis: 15 m/min MACHINE DETAILS Total power requirement: 26 kVA Machine weight: approx. 4.2 t Machine dimensions (L x W x H): 2.95 x 2.1 x 2.26 m Coolant system: yes On time: 18,534 h Spindle hours: 17,785 h Any visible vices, tool holders and chucks are not part of the scope of delivery!

Condition: ready for operation (used), Year of construction: 2001, Functionality: fully functional, clamping force: 4,500 kN, screw diameter: 75 mm, clearance between the columns: 800 mm, injection weight: 1,506 g, mold height (min.): 425 mm, opening stroke: 760 mm, TECHNICAL DETAILS Control: Unilog B4 Clamping force: 4,500 kN Minimum mold height: 425 mm Maximum mold height: 770 mm Column spacing (H x V): 800 x 800 mm Mounting plates (H x V): 1,155 x 1,195 mm Mold opening stroke: 760 mm Robot interface: Euromap 12 Delovzrn Deq Ai Rgjcg Injection unit Screw diameter: 75 mm Injection weight (PS): 1,506 g Injection volume: 1,657 cm³ Specific injection pressure: 1,739 bar MACHINE DETAILS Machine dimensions (L x W x H): 8.3 x 1.9 x 2.4 m Total weight: 20,400 kg Oil tank capacity: 800 l

Condition: ready for operation (used), Functionality: fully functional, machine/vehicle number: 570 023 4, travel distance X-axis: 710 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 520 mm, table width: 500 mm, table length: 700 mm, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS X-axis travel: 710 mm Y-axis travel: 520 mm Z-axis travel: 520 mm Work table length: 700 mm Work table width: 500 mm Spindle Spindle speed (min.): 20 rpm Spindle speed (max.): 12,000 rpm Spindle motor power: 25,000 W Rapid traverse speed & feed rate X-axis rapid traverse: 30 m/min Y-axis rapid traverse: 30 m/min Z-axis rapid traverse: 30 m/min X-axis feed rate: 10 m/min Y-axis feed rate: 10 m/min Z-axis feed rate: 10 m/min MACHINE DETAILS Total height: 3,300 mm Total length: 4,600 mm Total width: 5,500 mm Total weight: 6,000 kg Input voltage: 400 V Dcolq Ai Rov Exdmjgjg Type of input current: three-phase Any vices, tool holders and chucks shown are not part of the scope of delivery!

Condition: ready for operation (used), Year of construction: 2005, Functionality: fully functional, clamping force: 1,500 kN, screw diameter: 45 mm, clearance between the columns: 500 mm, injection weight: 250 g, opening stroke: 900 mm, Including robot - LR 100 TECHNICAL DETAILS Control: MC 4 with color monitor, integrated control panel and plate station Closing system: Fully hydraulic Screw diameter: 45 mm Suitable for: Thermoplastics Closing unit Closing force: 1,500 kN Clamping plates (H x V): 780 x 790 mm Free space between the columns (H x V): 500 x 500 mm Maximum opening width: 900 mm Injection unit Screw diameter: 45 mm Injection volume: 275 cm³ Dcelsvzrmgeq Ai Rgeg Injection weight: 250 g Injection pressure: 1,878 bar Electro-hydraulic equipment Pump motor power: 30 kW Heating element power: 16 kW ROBOT - Krauss-Maffei linear robot LR 100 Load capacity: < 10 kg (gripper + drives + parts) Loading side: opposite the operator X-axis (stroke from mold): 550 mm (servo motor) Y-axis (vertical stroke with motor brake): 1,200 mm (servo motor) Z-axis (lateral stroke): 1,500 mm (servo motor) C-axis (folding axis for depositing): 0-90° (pneumatic) Torque (Md): 30 Nm Position measurement: encoder MACHINE DETAILS Net weight (with control cabinet): 7.1 t Machine dimensions (L x W x H): 4.66 x 1.51 x 2.19 m

Condition: ready for operation (used), Year of construction: 2007, operating hours: 97,307 h, Functionality: fully functional, clamping force: 800 kN, screw diameter: 30 mm, displacement volume: 106 cm³, injection weight: 94 g, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Injection unit - plasticizing cylinder: B Screw diameter: 30 mm L/D ratio: 20 Specific injection pressure: 1,995 bar Displacement volume: 106.0 cm³ Injected part weight (PS): 94 g Max. dosing path: 150 mm Max. nozzle path: 200 mm Nozzle immersion depth (SVO): 40 mm Nozzle contact force: 60 kN Installed cylinder heating: 8.3 kW Filling hopper capacity: 35 L Dcslev Exblsq Ai Rgeg Total machine Oil tank capacity: 180 l Pump unit: 22.0 kW Installed total power: 30.3 kW Dry cycle rate according to EUROMAP 6a: 1.92 s - 259 mm Noise level (unpressurized circulation): 57.0 dB (AS) Noise level (power): 71.0 dB (AS) Switch-on time: 97,307 h Cylinder heating: 55,786 h Machine cycles: 3,160,294 Any visible vices, tool holders and chucks are not part of the scope of delivery!

Condition: good (used), Year of construction: 2008, operating hours: 11,667 h, Functionality: fully functional, machine/vehicle number: 5X1005, travel distance X-axis: 1,100 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 810 mm, spindle speed (max.): 14,000 rpm, swivel angle B-axis (min.): -120 °, swivel angle B-axis (max.): 30 °, swivel angle C-axis (max.): 360 °, TECHNICAL DETAILS Commissioning: November 2009 Travel paths X - Y - Z: 1,100 - 610 - 810 mm CNC rotary table: 610 mm NC controlled milling head (B-axis): +30° / -120° Dolqov Ew T Hs Ai Rgecg Spindle Spindle speed: 14,000 rpm Double gripper with tool magazine: 40-way Internal coolant supply: 40 bar with MAHLE filter HEIDENHAIN CollisionMonitoring: yes M & H infrared measuring probe: yes Operating mode: 2 MACHINE DETAILS Spindle running hours: 11,668 h Switch-on time: 31,053 h Control switch-on time: 42,230 h Spindle replacement: March 2017 Weight: 7.5 t Connected load: 75 kVA EQUIPMENT - Central lubrication - Control cabinet - Telescopic covers - Water cooler - Heidenhain scales in all axes - Chip conveyor: hinged belt design in X-axis - Coolant system - Work lamp - Machine cover - Machine manuals - HEIDENHAIN CollisionMonitoring - M & H infrared measuring probe - 40-way tool magazine - Internal coolant supply with 40 bar MAHLE filter - Chip conveyor in hinged belt design Any visible vices, tool holders and chucks are not part of the scope of delivery!