Used Akv for sale (27)

Year of construction: 2017, condition: excellent (used), coil width: 1.650 mm coil weight: 15 t stroke: 600 mm Ijdpfoinupvox Ab Ioa year: unknown / overhauled in 2017

Year of construction: 2017, condition: excellent (used), coil width: 1.650 mm coil weight: 15 t stroke: 600 mm year: unknown / overhauled in 2017 Ijdpslimtcofx Ab Iea

Condition: used, Year of construction: 2018, Edge banding machine AKV 3006 DK - F with jointing milling unit including DIA - tools Jointing thickness up to 40 mm Workpiece thickness up to 3 mm Combined milling station radius R 2.5 mm Technical description With application of hot glue to the workpiece for edge material up to 3 mm Workpiece thickness 60 mm without jointing unit, 40 mm with jointing unit Ijdpfx Asxfh Tmeb Iea Maintenance-free, coated glue pot HF - cross-cut station (16,000 rpm) for front and rear edge overhang HF - milling station (16,000 rpm) with interchangeable cutter (combination version) and fine adjustment from the operator side Free slots for additional processing units (system Hebrock), feed approx. 10 m/min Cutting depth adjustment of the cross-cut saw Signal lamp for workpiece sequence, robust chain drive, ergonomically arranged control panel Double-roller top pressure beam Aggregate viewing window from machine rear and operator side PLC control including touchscreen Technical data: - Feed speed 10 m/min - Panel thickness 8 - 40 mm - Weight: depending on equipment approx. 1550 kg - Dimensions (L x W x H) 5250 x 1445 x 1600 mm 2-point pneumatic cutter adjustment 1 unit Switching between radius - flush/bevel for the combined milling stations, switching between bevel or flush is manual by flipping the stop flap in the machine Buffing station (polishing) 1 unit Corner rounding cutter 1 unit incl. combination tool and pneumatic bevel/radius adjustment, max workpiece thickness 40 mm Minimum workpiece length 300 mm Radius R 2.0 mm Radius scraper 1 unit incl. pneumatic lift device, radius R 2.0 mm Surface scraper 1 unit with pneumatic engagement control Glue station change system incl. 2nd glue pot and glue outlet downwards 1 unit for quick color change Grooving saw unit horizontal into the edge 1 unit incl. pneumatic lift device and grooving tool Separate extraction of jointing unit 1 unit directly attached to jointing unit vertically upwards d=80mm for optimal suction performance from AKV 3005 DK-F urgently recommended Ball bearing for corner rounding cutter 24.1mm 1 unit Ball bearing for corner rounding cutter 24.2mm 1 unit Interchangeable motor 0.37 kW for corner rounding cutter 1 unit with quick-change device incl. radius cutter R 1 Interchangeable spindles 1 set = 2 pieces 1 unit 1 set of quick-change motors for longitudinal processing top and bottom incl. tool R 1 Compressed air requirement: 100 - 150 l/hour. Storage location: Nattheim

Condition: excellent (used), Hebrock 3003 Edge Bander well equipped, can be tested before purchase Initial MILLING AirTronic zero joint glueless system - hot air glue application with a roller, pneumatic preliminary guillotine pressure rollers anti-adhesive fluids finished cutting saw top-bottom milling unit, R1 - R2 pneumatically adjustable corner milling unit pneumatically adjustable flat scraper max element height 50mm max veneer thickness in roll 3mm Isdpfx Abswmc I Dj Iea feed 10m/min power consumption 15.8KW very good condition, fully fulfills its functions

Condition: used, Year of construction: 2007, machine/vehicle number: Werksüberarbeitungsnummer: WÜA1363DK-F7560, Used Machine GM020.0068 AKV 3003 DK - F Year of manufacture: 2007 Specification: 3 mm Iodpfow Nih Ijx Ab Isa 1st milling station: Combination Surface pull scraper with extraction Chassis Pneumatic milling adjustment Limit switch lever, 7.5° inclination

Condition: used, Year of construction: 2010, total length: 5,250 mm, total height: 1,780 mm, total width: 1,060 mm, Weight: 1.500 kg Price: On request - Year: 2010 - Documentation available: No - CE marking present: Yes - Serial number: 1969 - Transport dimensions: 5250mm x 1060mm x 1780mm (l x w x h) - Transport weight [kg]: 1500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Iodpfxswp D Uds Ab Isa Yorick Diebels

Condition: excellent (used), Year of construction: 2012, operating hours: 730 h, Edge banding machine Hebrock AKV3005DK-F with jointing, corner rounding, and two scraping blades. Very well-maintained machine from a small business, in excellent condition. Touch-screen interface with PLC control for user-friendly operation; up to 12 operating programs can be stored. Edge thickness (coil): approx. 0.4 – 3 mm Workpiece height: approx. 8 – 53 mm Feed rate: approx. 10 m/min Soundproof hood Extendable workpiece support, special feature, extendable up to 950 mm Extraction ports: 80 + 140 mm Units/Aggregates: Quick-change glue pot with glue outlet; two glue pots included (one used for EVA glue, one for PU glue), the PU glue pot is practically as new, used only for a single order. Upper pressure manual adjustment with SIKO counter Infeed fence manual adjustment with SIKO counter Edge thickness manual adjustment with SIKO counter Jointing cutters with Leitz Whispercut diamond cutters, still sharp Gluing unit with automatic edge feeding for coil material up to 3 mm Pressure section with 4 rollers Cross-cut saw Integrated chip container for edge offcuts Multifunctional milling unit, R2, with pneumatic adjustment between thin and thick edge Corner rounding mill R2, pneumatically adjustable between thin and thick edge Iedpfx Abotpn Eto Isa The profile mill can also be used for shelf programs, i.e., only the straight edge is rounded, not the corners Radius scraper R2, pneumatically retractable Glue joint scraper, pneumatically retractable Lockable hood CE mark Operating manual A video of the machine in operation can be provided upon request. All indexable inserts for the milling units and scrapers have been replaced or rotated, saws have been sharpened. Machine is ready for immediate use. Only the diamond jointing cutters (Whispercut) have not been replaced, but are still sharp. Paintwork touch-ups have been done. The Hebrock AKV series is the predecessor of the current K-series. The machine has only approx. 730 operating hours (glue pot switched on), but the frequency inverters were only switched on for approx. 455 hours. Machine is in very good condition; see original photos. Machine dimensions: approx. 5000 x 1400 x 1550 mm (L x W x H) Weight: approx. 1550 kg. The machine can be inspected and demonstrated on-site by appointment. We only offer machines that are ready for demonstration in our warehouse; see "more offers from this seller."

Condition: used, Year of construction: 2008, machine/vehicle number: 150344, Order No. 25052 Technical Specifications: - Maximum working width: 2020 mm Ijdjv Rbq Tjpfx Ab Isa - Maximum material thickness at 40 kg/mm² strength: 2 mm - Bending angle adjustment: 0 - 135° - Upper beam clamping via eccentric lever + foot pedal - Maximum opening width/stroke of the upper beam: 100 mm - Height adjustment of the lower beam: 25 mm - Space requirement: approx. W 2950 x H 1200 x D 800 mm - Weight: approx. 1450 kg

Condition: used, Year of construction: 2011, Pneumatic milling adjustment (Straight/Radius) Combination milling station R=2 Corner rounding cutter R=2 to 40 mm Jointing cutter up to 40 mm Flat scraper Profile scraper R=2 Short workpieces PLC control with Pro Face touchscreen Nesting Cooling/antistatic spray - airtronic Protective spraying Kante Riepe incl. interchangeable tank Workpiece thickness 8 - 60 mm Mechanical edge clamping Extraction nozzle: 140 mm Dimensions: Length with extension: 4984 mm Depth with roller table: 1425 mm Max. height: 1618 mm Worktable height: 888 mm Weight: 1400 kg Storage location: Nattheim Ijdpsxyiilsfx Ab Iea

Condition: used, Hebrock AKV 3005 edge bander, well-equipped, can be tested before purchase, Liquids before milling units, Pre-milling cutters, Glue application with roller, equipped with glue drain, Second glue pot included, pneumatic pre-cut guillotine, pressure rollers, final trim saw, milling unit top/bottom, R1 – R2 pneumatically adjustable, profile scraper, corner rounding unit, Ijdpfxow I Sp Ss Ab Isa liquids before scraper, flat scraper, polisher, max edge tape thickness in roll: 3mm, max edge thickness for lipping: 12mm, machine in very good condition.

Condition: used, Year of construction: 2018, machine/vehicle number: Werksüberarbeitungsnummer: WÜA3581DK-F21600, Used machine GM020.0050 AKV 3005 DK - F Year of manufacture: 2018 Specification: 8 mm 1st milling station: Combination Pneumatic 3-point adjustment Cleaning station Corner rounding cutter Radius scraper station incl. lift Surface scraper PLC control incl. touchscreen Interchangeable tanks Nesting Glue discharge 60 mm workpiece thickness (joining and corner milling) Spraying device for panels Edge protection spraying Short workpieces Iedpfx Ajw Nif Hsb Ija

Condition: used, Year of construction: 1991, Used machine Year of construction: 1991 max. workpiece height approx. 40 mm min. workpiece length approx. 250 mm min. Workpiece width approx. 70 mm Feed rate approx. 11 m/min. Ready for operation approx. 4-5 min. Power consumption approx. 11 kW with heated infeed ruler with quick-heating adhesive container Pneumatic roller capping up to 3 mm with cross-cut saw up to 5 mm edge thickness Isdpfowka Tlex Ab Ioa with routing station equipped with combined insert routers on request for radius, straight and chamfer routing Extension arm, can be folded down and extended to the front with chassis with integrated extraction system L x W x H 3600 x 1400 x 1200 mm Weight approx. 670 kg Availability: at short notice Location: Hochheim Hochheim

Condition: ready for operation (used), Year of construction: 2004, Brand: Hebrock Model: AKV 83 F Year of manufacture: 2004 Machine no: 10759 Technical data: Workpiece thickness: from 10 - 50 mm Iodeu Racxjpfx Ab Ioa Feed speed: 3 - 4 m/min Electrical connection: 220/380 Volt, 50 Hz. Power: 3 KW Dimensions: 1750 x 800 x 1250 mm (complete) Weight: approx. 95 kg. Heating: 3 KW, with stepless electronic temperature control, 0 - 650 degrees C Motor: 3.5 kW Stock no: 2002311BXA

Year of construction: 1998, condition: ready for operation (used), A right-sided Hebrock edge banding machine is available. Workpiece thickness range: 10mm-50mm, min. workpiece width: 70mm, min. workpiece length: 250mm, edge thickness (roll material): 0.5mm-5mm, max. edge height: 55mm, feed rate: 10m/min. Machine dimensions X/Y/Z: approx. 3000mm/1500mm/1300mm, weight: approx. 700kg. On-site inspection is possible. Isdpfxow A R S Ne Ab Ija

Condition: used, Year of construction: 2007, Edgebanding milling machine 1. Milling station R=2.5 Combination unit Corner rounding cutter R=2 Surface scraper Profile scraper Pneumatic milling adjustment (Straight / Radius) PLC control with Pro-face touchscreen Interchangeable tub Preparation for special equipment Special feature: Max. workpiece thickness 60 mm (without jointing) Operating hours: 4270 h Storage location: Nattheim Ijdpfjxnlacex Ab Ioa

Condition: used, Year of construction: 1994, for pre-coated edges Iedpfx Abevwfzvs Iea including a lot of edge material with outriggers on both sides end cap station 3-roller feed used, good condition Make Hebrock Type AKV-83 Year of construction 1994 Edge band thickness 1.0 mm Workpiece height max. 50 mm Workpiece width min. 50 mm Workpiece length min. 170 mm Space requirement approx. 1700 mm x 690 mm x 500 mm Storage location 97447 Gerolzhofen, freely loaded, unpacked Handover in the current condition as seen, without guarantee and guarantee

Condition: used, Year of construction: 2005, machine/vehicle number: Werksüberarbeitungsnummer: WÜA920DK-F12960, Used machine GM020.0029 Year of manufacture: 2005 AKV 3005 DK-F 8 mm version 1st milling station: Combination Cleaning station Corner rounding cutter Jointing cutter Isdjw In R Ejpfx Ab Ija Surface scraper with extraction Profile scraper Chassis Pneumatic milling adjustment SPS control Preparation for interchangeable tanks

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Edge banding machine with jointing cutter (incl. DIA tool), with PLC control (incl. touch screen) with hot-melt glue application to the workpiece for edgebanding material up to 3 mm: maintenance-free, coated gluing bowl with exchangeable bowl preparation, HF cross-cut saw station (approx. 16,000 rpm) for front and rear edge overhang, HF trimming station (approx. 16,000 rpm) with exchangeable panel trimmer (combination version), router fine adjustment from the operator's side (Hebrock system), Corner rounding cutter (minimum workpiece length 300 mm, Iedpfxol H E H Ho Ab Ioa max. workpiece thickness 40 mm), surface scraper incl. pneumatic lifting, robust chain drive, double roller top pressure, unit viewing window from the machine rear and operator side, extendable workpiece workpiece support, feed approx. 10 m/min, 60 mm workpiece thickness, incl. 1x exchangeable basin incl. chassis

Condition: good (used), Year of construction: 2005, Brand: Hebrock Model: AKV 88 D Iedjq Ihxpjpfx Ab Isa Machine no: 569-P3 Year model: 2005 Tech data: Max edging thickness: approx. 3mm Max working height: 50mm Inner radius min: approx. 8mm Feed speed 0-7 m/min Warm-up time: approx. 6.5 min Motor: 9.3Kw, 50Hz, 400V Machine size (lxwxh): 1360x690x1220mm Weight: approx. 150Kg Stock no: 2001921BXA

Condition: used, Year of construction: 1996, Plate running direction: from operator to the left Max. edge thickness: 8.0 mm Min. workpiece width: 70 mm Feed speed: 11 m/min Heating-up time: 4.5 min Automatic roll magazine: Yes Cutting shears up to: 0.2 - 3.0 mm Individual edge feed: Yes Automatic gluing: Glue pot with granulate on top Cut-off saw: fixed at 90° Flush-milling unit: Yes Combination milling unit: Yes Aggregate display: glue display Control type: manual Operation: selector switch / push buttons Travel device: Yes Protective hood: Yes Working height or infeed table height: 870 mm Approx. weight: 670 kg Dimensions: 3600 x 1400 x 1200 mm Motor power: 11 kW Extraction diameter: 120 mm Storage location: Supplier Iodpfxexwdp Us Ab Ioa

Year of construction: 1995, condition: ready for operation (used), machine/vehicle number: 585, Brand: Hebrock Model: AKV 1000 V Machine no: 585 Year of manufacture: 1995 Tech. data: Ijdpfxoib H Slj Ab Ioa Edgeband thickness max: 3 mm Edgeband height max: 50 mm Max feed speed: 7.5 m/min With cutting knife Length of work table: 2200 mm Motor: 7 kW, 50 Hz, 230/400V, 3-phase Size for transport: Length: 220 cm Width: 115 cm Height: 150 cm Stock no: 2001164BXM

Condition: excellent (used), Year of construction: 2010, the complete Tetra Pak volume conversion kit A3 Flex 200/250 ml Square, version machine 100/150. Packed into original wooden Tetra Pak boxes. Excellent condition. Iedpsf Th Sxjfx Ab Isa Location - Poland

Condition: new, Stackable galvanized crate with front flap and lid 1000 x 800 x 500 This lockable metal storage crate with lid and half front flap is made from hot-dip galvanized steel (note: the lid is electrolytically galvanized, not hot-dip). This ensures a long service life as rust cannot affect the steel panels of the crate itself. The crate is equipped with four lifting eyes. Thanks to these lifting eyes, the lockable storage bin can easily be moved using a crane (note: this crate is not certified for lifting operations!). Additionally, these crates are very stackable and easy to move with a forklift truck. Ijdpjw Nigqefx Ab Isa Specifications for storage crate with lid: Capacity: 192 litres 4 lifting eyes (note: this crate is not certified for lifting operations!) Stackable Completely lockable Hot-dip galvanized crate body Electro-galvanized lid

Year of construction: 2021, condition: as good as new (ex-display), Single head sawing machine with up-feed blade Ø 550 mm and manual positionning of the vertical axis FOM INDUSTRIE PANDA 550 with measuring roller conveyor ASSOMAK VS 7m and inlet conveyor PORTER 4,2m, year 2021 Condition: as new Configuration XZ-10493 PANDA 550: - Ø550 mm tungsten carbide saw blade - Grades digital display (manual rotation) - Hydro pneumatic advance of the blade (adjustable blade exit speed quick return) - Rotation from 20° Lh to 20° Rh on vertical axis - Minimum quantity lubrication (MQL) with pure oil - Working pressure: 7 bar - Saw blade motor, three phase (4 kW) - 2800 rpm, 230/400 V - 50 Hz Oprions installed on the machine: - IV222100 Vacuum cleaner for extraction of chips and fumes Configuration XK100273 ASSOMAK VS 7m: - Minimum cut 0 mm - Maximum cut 7 m - Measurement reading by encoder - Mobile carriage slides along wheels in polymer with belt-driven - Positioning precision ± 0,5 mm - Loading capacity per linear meter: 10 Kg - Width of bar resting surface: 200 mm - Work table height adjustment range 820-990 mm - Length stop with sliding surface under the work table, to give constant reference under all working conditions Ijdpfephlnqjx Ab Isa - Pneumatic stop locking - Belt-driven positioning Configuration XK201569 PORTER 4,2m: - Working length 4,2m - Loading capacity per linear meter: 10 Kg - Width of bar resting surface: 200 mm - Work table height adjustment range 820-990 mm

Condition: good (used), Year of construction: 2002, I sell the edge banding machine HEBROCK AKV088D, Year 2002. Iodpfxsvx D Auo Ab Ioa Suitable for curved shaped edges Good condition, possible to test ! Possible to buy also the Radius milling machine HFF08.