Second-hand machinery for sale (2,359)

Year of construction: 2013, operating hours: 63,326 h, Condition: used, Functionality: fully functional, Fully automatic MICROFINISH machine for machining camshafts with max. Ø 60 mm and a total length of 700 mm. Year of manufacture 2000/2013 converted to pass bearing machine. TECHNICAL DETAILS workpiece length: 700 mm swing diameter: 60 mm center height: 1050 mm spindle stroke: 42 mm tailstock stroke: 250 mm number of spindles: 1 number of fiducial bearing machining stations: 1 piece Control: CNC Speed: 25 - 250 rpm (infinitely variable) oscillation stroke: 0 - 6,5 mm Djln Tispxl Uheg Teut Oscillation frequency workpiece (axial): 100 - 1000 DH/min MACHINE DETAILS total power requirement: 61 kW machine weight: approx. 9 t (without additional aggregates) space requirement: approx. 4 x 2.5 x 2.4 m

Condition: ready for operation (used), Year of construction: 2000, operating hours: 48,743 h, Functionality: fully functional, machine/vehicle number: 28830006172, The machine is equipped with a chain magazine, pallet turntable and loading station. MAINTENANCE - Motor and pump for the hydraulic system replaced - Replaced the hoses - LI module replaced in the control cabinet - Drum on the Knoll system replaced TECHNICAL DETAILS X-travel: 600 mm Y-travel: 560 mm Z-travel: 560 mm B-axis: 360° Control: SINUMERIK 840D powerline Infinitely variable speed: 0 - 8000 rpm Tool magazine: Chain magazine Number of tool positions: 90 / max. 450 kg Circular pallet storage: "compact" Rotation speed PSA axis: 3 rpm Positioning time 1 x 90°: 3 s Pallet change time: 6 s Number of storage locations: 4 Pallet size: 400 x 500 mm Loading height: 1100 mm Load with 1/2 loaded pallets: max. 350/600 kg/pallet Maximum workpiece weight with one-sided load: 350 kg Duelnetrdrno Tig Tst Workpiece height: 770 mm Torque 100 % / 40 % ED: max. 124 / 191 Nm Motor power 100 % / 40 % ED: max. 13 / 20 kW Feed rate: 60,000 mm/min Rapid traverse: 60 m/min Set-up mode: 2,000 mm/min Feed force X,Z / Y: 9600 / 8000 N Position measuring system Resolution: 0.001 mm (position tolerance according to VDU DGQ 3441) MACHINE DETAILS Machine dimensions L x W x H: 4.5 x 2.4 x 2.4 m Installation area: 7 x 5 m Transport weight incl. cladding: 3,400 kg Transport dimensions DMC 60 H L x W x H: 2.9 x 2.0 x 2.4 m Connected load DMC 60: 80 kVA EQUIPMENT - Chip conveyor - Technical documents and installation plan available

Condition: like new (used), Year of construction: 2022, operating hours: 50 h, Functionality: fully functional, paper weight (max.): 1,00,000 g/m², paper width (max.): 1,625 mm, paper height (max.): 200 mm, Reason for return: The printer has not printed for 50 hours. The business area has not grown as expected, so the printer has been standing more than it has been in operation. Condition: The print head has been flushed and all nozzles have been printed as a test image in the test print before flushing. A new head may be required for commissioning. No minimum price - guaranteed sale to the highest bid! TECHNICAL DETAILS Printing process: Piezo inkjet Print width: 1,625 mm Paper thickness/height: 0.01 to 200 mm Weight capacity of the print bed: 100 kg/m² Print bed size: 1,690 (W) x 3,066 mm (D) Print size: 1,604 (W) x 2,500 (L) x 200 mm (H) Ink cartridges Type: Roland ECO-UV EUV-5 Colors: Cyan, magenta, yellow, black, white, gloss, primer Ink type configurations: CMYKWhGlPr Vacuum system: 2 vacuum zones Print resolution: max. 1,440 dpi Motion drive: High-resolution stepper motor Print accuracy: Error rate max. ±0.3 % of the distance traveled or ±0.3 mm (depending on the larger value) Repeat accuracy: ± 0.01 mm Duelsvfr H Uen Tig Tst Output modes: Continuous, unload, back to origin, layered Media height adjustment: Manual or automatic sensor Surface control: Manual or automatic sensor Control: 7-inch color LCD touch screen Network: Ethernet base 10/100 MACHINE DETAILS Printer dimensions: 2,815 x 3,126 x 1,490 mm Control panel dimensions: 530 x 530 x 1,080 mm Weight: 800 + 50 kg Ambient conditions: 20 - 32 °C, 35 - 80 % humidity Power supply: 230 V, 16 A, 2P+E Power consumption: max. 2.65 kW in operation with vacuum Sound pressure level printing / stand-by: < 70 / 40 dB Transport dimensions: 3,500 x 2,000 x 1,776 mm Transport weight: 1,180 kg

Condition: good (used), Year of construction: 2007, operating hours: 66,989 h, Functionality: fully functional, machine/vehicle number: 17224, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 30, swivel angle B-axis (min.): -110 °, swivel angle B-axis (max.): 110 °, swivel angle C-axis (max.): 360 °, TECHNICAL DETAILS Control: MATSUURA G-Tech 30i FANUC 30i MA, 5-axis simultaneous machining X-axis travel: 550 mm Y-axis travel: 410 mm Z-axis travel: 450 mm B-axis travel: +110° to -110° C-axis travel: 360° Distance table surface - spindle nose: -10 mm to +440 mm Distance B-axis - spindle nose: -40 mm to +410 mm Distance B-axis - table surface: -30 mm Distance table center - X-axis end position (B-axis in zero position): 265 mm Distance table center - Y-axis end position (B-axis in zero position): 180 mm Distance floor - table surface (B-axis in zero position): 945 mm Work surface: Ø170 mm Max. Workpiece size: Ø250 mm x 250 mm height Table load: max. 40 kg Table surface: 4 radial T-slots (90° pitch, 12 mm width) Table indexing B and C axes: 0.001° Table indexing time B-axis 90°: 1.2 s Table indexing time C-axis 90°: 0.9 s Holding torque B-axis: 1,112 Nm Holding torque C-axis: 500 Nm Torque B-axis: 1,070 Nm Torque C-axis: 192 Nm Spindle speed range: 50 - 15,000 rpm Spindle mount: BT 40 JIS B 6339 Big+ Pull stud: BT 40 JIS B 6339 40P Inner diameter of spindle bearing: 70 mm Spindle motor power: 7.5/5.5 kW Max. Spindle torque: 65.1 Nm up to 1,100 rpm Rapid traverse X-, Y-, Z-axis: 50,000 mm/min Rapid traverse B-axis: 30 rpm Rapid traverse C-axis: 50 rpm Feed X-, Y-, Z-axis: 1 - 50,000 mm/min Min. feed increment X-, Y-, Z-axis: 0.001 mm Min. feed increment B-, C-axis: 0.001° Number of tools in the magazine: 40 Max. Tool weight: 10 kg Max. Tool diameter (full load): Ø96 mm Max. Tool diameter (free neighboring stations): Ø150 mm Max. Tool length: 300 mm Tool change time (5 kg): 1.1 s Chip-to-chip time (5 kg): 4.1 s MACHINE DETAILS Machine height: 2,705 mm Machine width: 2,281 mm Machine depth: 3,665 mm Machine weight: 8,600 kg Total connected load: 32 kVA Supply voltage: 3 x 400 V, 50 Hz Compressed air connection: 5.5 - 9.5 bar Compressed air consumption: max. 1,000 l/min (at 20,000 rpm) EQUIPMENT - Tool changer with 30 stations (chain) - Complete full casing - Spindle (50 - 15,000 rpm), grease lubricated - Spindle blow-out - Electric spindle orientation - Spindle oil cooler and spindle overload protection - Air nozzle on headstock, switchable via M function - 2 spiral chip conveyors Doljuruatsn Tig Tsut - Coolant tank with standard coolant pump - Rotary encoder for B and C axes - Work area light - Control panel with 10.4" color screen - Power on/off timer - Ethernet interface for program data transfer - Machine design in accordance with European safety requirements

Condition: good (used), Year of construction: 2006, operating hours: 48,000 h, Functionality: fully functional, machine/vehicle number: A0230A1295, laser power: 5,000 W, sheet thickness aluminum (max.): 12 mm, sheet thickness steel (max.): 25 mm, No minimum selling price - guaranteed knockdown to the highest bid! TECHNICAL DETAILS Make: TRUMPF Type: Trumatic L 3050 - 5 kW Year of manufacture: 2006 Working range X-axis: 3,000 mm Y-axis: 1,500 mm Z-axis: 115 mm Control system Type: Siemens Sinumerik 840 D Laser power Laser power: 5,000 W Max. Sheet thickness: Mild steel 25 mm Max. Sheet thickness: Stainless steel 20 mm Max. Sheet thickness: aluminum 12 mm Operating hours Operating hours: approx. 48,000 hours EQUIPMENT Closed machine frame with integrated laser unit Laser unit: TLF 5000 CO₂ laser, high-frequency excited, cooling unit, logbook function Automatic pallet changer Longitudinal conveyor belt for small parts/waste Drives: Gantry drive in combination with linear direct drives Laser power control HI-LAS high-pressure cutting Plasma sensor system (PMS) Fast processing with SprintLas ContourLas for the production of small holes Programmable power cycles Microweld Programmable cutting gas pressure setting Laser cutting head with 5" lens and laser cutting head with 7.5" lens Quick-change cutting head device Automatic sheet outer edge detection Capacitive height control (DIAS) Process Control System (PCS) Position laser diode Automatic switch-off Work area lighting SIN 840D control system: Open control system on PC basis, simple operation, online help, diagnostic functions, maintenance logbook, technology data, teleservice Workshop programming ToPs 100 lite Safety and security Multi-beam light barriers Beam guidance completely encapsulated and ventilated with nitrogen Monitoring system Multi-chamber extraction and compact dust extractor Protective cabin Network connection BNC/RJ-45 network connection Dslnju R Sa As Tig Tjut Electrical equipment Voltage: Three-phase current 400 V / 50 Hz EXTENDED EQUIPMENT Liftmaster included

Condition: good (used), Year of construction: 2019, Functionality: fully functional, TECHNICAL DETAILS Djln Tietwbkqsg Tsut Rolling diameter: 6-80 mm Width of the rolling tool: max. 150 mm Outer diameter of the rolling tool: max. 240 mm Center distance tool spindle - center: 190-240 mm Pitch size range (normal): 1-12 mm motor Rollers: 15 kw-6 Hydraulic: 5.5 kw-4 Cooling: 0. 125 kw Rolling force: max. 500 KN Spindle diameter: 85 mm Inclination angle of the spindle: +/- 10° Volatility: 380 V, 50 HZ, 3 phase MACHINE DETAILS Size of the basic machine: 2600 x 2100 x 1600 mm Size of the hydraulic station: 800 x 500 x 1250 mm Weight of the machine: 4500 kg Length of the workpiece: Unlimited

Condition: good (used), Year of construction: 2010, operating hours: 21,825 h, Functionality: fully functional, pressing force: 150 t, throat depth: 250 mm, Application until 15.12.2024 - Bid submission obliges timely collection Very extensive range of tools included in the scope of delivery (see pictures) TECHNICAL DETAILS General information Make: Hämmerle Type: 3P 150/3100 Year of construction: 2010 Capacity and working area Bending length: 3100 mm Pressing force: 150 t Stroke: 400 mm Usable installation height: 915 mm Free upright clearance: 3200 mm Projection: 250 mm Speed Y rapid traverse: up to max. 180 mm/s Y-operation: 1-10 mm/s Y-retraction: 150 mm/s Working height and control Working height: 1060 mm Control system: MMC Bybend Operating data Operating hours: 21,825 h Dimensions and weight Length: 4810 mm Width: 2320 mm Height: 3345 mm Weight: approx. 15,000 kg EQUIPMENT Operator terminal: 15" TFT-LCD flat screen, network card, Windows XP, MMCBybend software Machine frame: Torsion-free steel screw construction Upper beam guide: Roller bearings with case-hardened guide rails Measuring system: High-resolution system Tool clamping: Hydraulic quick clamping for upper and lower tools Quick clamping of upper tools: Integrated scale Lower tool holder: Hämmerle 3-point Table displacement: Hydraulic Safety system: AKAS laser, motorized height adjustment Side safety guards: Electrical monitoring Light curtain: At the rear Back gauge system: 5 axes with 2 stop arms and angular adjustable stop fingers Workpiece supports: 2 manually adjustable supports, length 750 mm Linear guide: On the lower beam, with two parking spaces (250 mm each) Control panel: With foot switch Support arm for operating terminal: Double joint, height-adjustable Extended equipment Rear of machine: Rear bending aid, infinitely programmable for H, a, W axes, 0-75° Deln Tou Rbr Ieig Teut Additional bending aid: Rear Accessories for the machine Work area lighting: LED front and rear Barcode scanner: For calling up bending parts, programmed via Bybendpart

Condition: excellent (used), Year of construction: 2012, Functionality: fully functional, grinding length: 400 mm, center width: 150 mm, grinding diameter: 300 mm, High-speed and precision grinding machine, incl. robot automation, B6 wheelhead (2x grinding spindles for external cylindrical grinding), RUMA emulsion tank with centrifuge (built in 2011), larger DELBAG MultiAir Premium extraction unit (built in 2018), 2x grinding wheels, regular maintenance according to maintenance contract TECHNICAL DETAILS Control system: 840 D SL Siemens Sanding area Sanding diameter: max. 300 mm Sanding length: 400 mm Center distance: 150 mm Max. Workpiece weight: 50 kg X-axis Travel distance: 320 mm Max. Speed: 15,000 mm/min Min. speed: 0.01 mm/min Min. increment: 0.001 mm Drive force: 1,225 N Z-axis Travel distance: 600 mm Max. Speed: 15,000 mm/min Min. speed: 0.01 mm/min Min. increment: 0.001 mm Drive force: 1,225 N B-axis Number of spindles: 2 Rotation range: +0 / -210° Tool dimensions: Ø500 x 25 x Ø203.2 mm Cutting speed: 60 m/s Power: 25 kW Workpiece headstock Axis speed: 30 - 5,000 min-¹ Mounting taper: MK 5 Torque: 24 Nm Tailstock Quill stroke: 40 mm Mounting taper: MK 4 Power requirement Total power requirement: 79 kW Machine weight and space requirement Machine weight: approx. 6 t Space requirement (L x W x H): 6.0 x 3.0 x 2.5 m EQUIPMENT documentation Triple signal lamp MultiAir Premium Delbag extraction system Dujln Tigou Hlwts Tjt

Condition: excellent (used), Year of construction: 2019, operating hours: 1,850 h, Functionality: fully functional, overall weight: 14,000 kg, oil tank capacity: 2,000 l, operating pressure: 300 bar, power: 0.09 kW (0.12 HP), TECHNICAL DETAILS Briquette dimensions: approx. 270 x 100 x 100 mm Total weight: 14,000 kg Dslnjvgb D Ss Tig Teut Oil tank capacity: 2,000 l Operating pressure: 300 bar Power: 0.09 kW (0.12 hp) Motor voltage: 380 V EQUIPMENT - Feed silo, for smooth production - Reinforced concrete silo with hydraulic moving floor - Alko mobile dust extractor, specially adapted for the press, prevents dust formation and protects the machine from rapid soiling - Emergency stop switch for increased safety.

Condition: like new (used), Year of construction: 2009, Functionality: fully functional, turning diameter over cross slide: 258 mm, turning diameter over bed slide: 460 mm, center height: 225 mm, spindle speed (max.): 3,000 rpm, distance between centers: 930 mm, TECHNICAL DETAILS Control system: Siemens 810D with Shop Turn Turning diameter over bed: 460 mm Turning diameter over cross slide: 258 mm Center height: 225 mm Distance between the centers: 930 mm Bed width: 300 mm Spindle motor: 9 kW Spindle speed level I: 140 - 400 rpm Spindle speed level II: 36 - 1,000 rpm Spindle speed level III: 1,000 - 3,000 rpm X-axis motor: 0.82 kW Z-axis motor: 1.48 kW Spindle nose: D1 - 6 Spindle bore: 58 mm Quill diameter: 68 mm Quill travel: 127 mm Quill holder: MT4 X-axis travel: 340 mm Z-axis travel: 930 mm Doljurlyden Tig Teut Rapid traverse X-axis: 5,000 mm/min Rapid traverse Z-axis: 5,000 mm/min MACHINE DETAILS Dimensions L x W x H: 2,500 mm x 1,350 mm x 1,800 mm Weight: 1,850 kg EQUIPMENT - CE modification

Condition: ready for operation (used), Year of construction: 2007, operating hours: 26,073 h, Functionality: fully functional, laser power: 4,000 W, sheet thickness aluminum (max.): 10 mm, sheet thickness steel (max.): 20 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, TECHNICAL DETAILS Travel X / Y / Z: 3000 / 1500 / 115 mm Workpiece weight: max. 900 kg Control: Sinumerik 840 D SL Laser source: TruFlow 4000 Power range: max. 4,000 W Wavelength: 10.6 µm Sheet thickness Al / stainless steel / mild steel: 10 / 15 / 20 mm Simultaneous speeds: 140 m/min Position deviation Pa: ±0.05 mm Position spread Ps: ±0.03 mm MACHINE DETAILS Dimensions: 9.3 x 4.6 x 2.2 m Weight: 12.0 t Connected load: 88 kVA Dsln Toucu Ttjig Teut Switch-on time: 47,377 h Cutting time: 26,073 h

Condition: excellent (used), Year of construction: 1972, Functionality: fully functional, Machine is ready for immediate use! TECHNICAL DETAILS Number of thread rolls: 2 Thread rolling pressure: 24 t Shaft diameter: 69.85 mm Roller mounting length: 200 mm Rollable material: 5 - 75 mm Rollable pitch: 8 mm Deln Tietyygcsg Tout MACHINE DETAILS Weight: 3000 kg Dimension: 2120 x 900 x 1450 mm

Condition: reconditioned (used), Year of construction: 2005, operating hours: 5 h, Functionality: fully functional, travel distance X-axis: 750 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 650 mm, number of slots in tool magazine: 30, swivel angle B-axis (min.): -10 °, swivel angle B-axis (max.): 110 °, swivel angle C-axis (max.): 360 °, Equipment: chip conveyor, documentation/manual, Spindle overhaul in December 2024 - geometry protocol available below Vertical machining center with linear drive technology and gantry design for maximum precision TECHNICAL DETAILS X-path: 750 mm Y-path: 650 mm Z-path: 650 mm C-axis: 360° B-axis: -10° to +110° Control: HEIDENHAIN iTNC 530 Spindle Spindle speeds (infinitely variable): 1 - 18,000 rpm Tool holder: HSK-A 63 Table Table diameter: 750 mm Table load: max. 0.6 t Tool magazine Capacity: 30 places Duolevkcy Nen Tig Tot MACHINE DETAILS Total power requirement: 70 kW Machine weight: approx. 12,000 kg Control system switch-on time: 11,679 h Machine switch-on time: 10,985 h Program run time: 5,070 h Spindle running time: 4,753 h - after overhaul in December 2024: 5 h EQUIPMENT - Direct path measuring system - Bed flushing - IKZ - internal coolant supply through the center of the spindle - Paper belt filter incl. Visiport and rinsing gun - Cooling device with blast air on the outside of the spindle - Temperature compensation - Active cooling unit for drives, control cabinet and motor spindle - Scraper belt chip conveyor - Tool breakage check incl. tool length and diameter measurement via laser Calibration ring - Heidenhain measuring probe - Heidenhain 410 manual control panel for set-up mode - documentation

Condition: excellent (used), Year of construction: 2000, Functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: Siemens, controller model: 840D, CNC machining center vertical, HERMLE - C 800 V, top condition, without vices and tools TECHNICAL DETAILS Control: Sinumerik 840D Siemens Travels X-axis: 800 mm Y-axis: 600 mm Z-axis: 500 mm Spindle / table distance: 100 - 500 mm Main spindle Speed: 8,000 min-¹ Drive power: 10.5 kW Tool holder: HSK 63 Spindle diameter in the front bearing: 70 mm Work table Duslju Hlrqon Tig Tjt Table clamping surface: 1,000 x 560 mm Max. Table load: approx. 1,000 kg Tool changer Number of tool positions: 30 positions Tool holder: HSK 63 Max. Tool diameter: 80 mm Max. Tool diameter with free neighboring box: 125 mm Max. Tool length: 300 mm Max. Tool weight: 8 kg Feed rates Rapid traverse (X / Y / Z): 35 m/min Power requirement Total power requirement: 31 kVA Machine weight and space requirement Machine weight: approx. 7.0 t Space requirement (L x W x H): 3.5 x 3.0 x 3.0 m EQUIPMENT documentation Chip conveyor Coolant device Tool changer Electric handwheel

Condition: good (used), Year of construction: 1996, operating hours: 1,000 h, Functionality: fully functional, fuel type: diesel, bar diameter: 600 mm, product height (max.): 150 mm, product length (max.): 10 mm, product width (max.): 150 mm, TECHNICAL DETAILS Machine type: Mobile auger chipper Drive: Diesel engine Engine: 8 cylinder Scania Chassis: Tracked chassis Maximum trunk diameter: 60 cm Wood chip size: approx. 15 x 15 x 1 cm MACHINE DETAILS Length: approx. 9,000 mm Width: approx. 2,800 mm Dujlnsvgb Hys Tig Tst Height: approx. 3,600 mm Weight: approx. 16 t Operating hours: approx. 1,000 h Tank capacities Diesel tank: approx. 500 l Hydraulic tank: approx. 1,500 l

Condition: excellent (used), Year of construction: 2003, Functionality: fully functional, travel distance X-axis: 680 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 625 mm, rotational speed (max.): 15,000 rpm, number of slots in tool magazine: 240, swivel angle B-axis (min.): -110 °, swivel angle B-axis (max.): 65 °, swivel angle C-axis (max.): 360 °, TECHNICAL DETAILS Control system: Fanuc 16iMB X-axis travel: 680 mm Y-axis travel: 400 mm Z-axis travel: 625 mm B-axis travel: +65º to -110º C-axis travel: 360º Distance pallet spindle nose: -86 mm to 540 mm (for B-axis 0º) Pallet center-spindle nose distance: 60 mm to 685 mm (for B-axis -90º) Pallet center-to-column guide distance: -25 mm to 375 mm Spindle center-to-column guide distance: 227 mm Distance between floor and pallet surface: 1,165 mm Work surface diameter: 130 mm Pallet load: max. 60 kg Pallet changer: 40 pallets Workpiece dimensions: max. Ø360 mm x 250 mm height Spindle speed: 40 - 15,000 rpm Spindle taper: 7/24 steep taper #40, Big PLUS Spindle diameter: 80 mm Spindle torque: max. 135 Nm at 850 rpm (15/7.5 kW) Number of tools: 240 Tool diameter: max. 80 mm, with free neighboring stations max. 150 mm Tool length: max. 260 mm Tool weight: max. 8 kg Rapid traverse X-axis: 30 m/min Rapid traverse Y-axis: 30 m/min Rapid traverse Z-axis: 30 m/min B-axis speed: 10 rpm C-axis speed: 13.5 rpm Feed speed X/Y/Z: 1 - 15 m/min Feed speed B-axis: 1 - 2,160º/min C-axis feed speed: 1 - 3,600º/min MACHINE DETAILS Machine height: 3,210 mm Machine weight: 11,700 kg Footprint: approx. 4,945 mm x 3,655 mm EQUIPMENT - Rotary encoder for B and C axes, direct path measuring system (Heidenhain) for X, Y and Z axes - Internal cooling: 30 l/min, 20 bar - Scraper belt chip conveyor - Power on / power off timer - Measuring probe RENISHAW MP 10 Easy Probe - Renishaw NC 1 laser - 2 MB memory - 8 additional M-functions Doln Tigjurlwvj Tjut - Number of tool corrections: 999 - Increase of workpiece coordinate systems from 6 to 54 - Coordinate system rotation G68/G69 - Automatic zero point tracking - Program restart

Year of construction: 2006, operating hours: 1,09,000 h, Condition: excellent (used), Functionality: fully functional, Horizontal machining center with 6-fold pallet station Machine has run only in aluminum - new spindle in 2020 Dueln Tigemfrgns Tst TECHNICAL DETAILS X-axis: 700 mm Y-axis: 800 mm Z-axis: 800 mm NC rotary table, B-axis 0.001 spindle speed: max. 18000 rpm control: SIEMENS 840D Shopmill clamping area: 500 x 500 mm table load: max. 800 kg workpiece diameter: max. 800mm workpiece height: max. 900mm tool holder: HSK 63 tool changer: 180 positions spindle power: max. 30 kW torque: 5.000 Nm Holding torque: 5.000 Nm rapid traverse/feed rate: 60 m/min Feed force in X/Y/Z: 10 kN EQUIPMENT - chip conveyor - Pallet station 6 pallets - Automatic tool measurement 3 D wireless probe M+H - Coolant system with paper belt filter - IKZ system with belt filter, 40 bar 30 tool pockets in the magazine are defective.

Condition: ready for operation (used), Functionality: fully functional, Year of construction: 2009, No minimum price - guaranteed sale at the highest bid! The system is a modular system and can therefore be quickly dismantled and reassembled. TECHNICAL DETAILS Storage components Ring-pan mixer: 1 m³ Pre-silo: 4.5 m³ Gravel silo: 2 pieces, 6 components each Cement silo: 2 pieces, 3 chambers each Chemical scale: Finke with 3 chambers Software and maintenance Software: Version from 2022, updated to the latest operating system Base plates: Renewed in 2023 Mixer Type: Forced action mixer Model: Huggler Capacity: 1 m³ hardened concrete Gravel silo 1 Components: 4 Capacity K1: 20 m³ Capacity K2: 32 m³ Capacity K3: 32 m³ Capacity K4: 20 m³ Gravel silo 2 Components: 2 Capacity K5: 20 m³ Capacity K6: 20 m³ Cement silo 1 Type: 2-part silo Cement 1 capacity: 20 t Cement 2 capacity: 40 t Cement silo 2 Type: 1-piece silo Cement 3 capacity: 60 t Admixture Admixture weigher: Finke Number of chambers: 3 Chamber capacity: 6 components, conveying system by pump Year of construction Gravel silo 1 and cement silo 1: 2009 Gravel silo 2 and cement silo 2: 2013 Dusln Tisu Rc Nneg Tjt Other Heating: Gravel silos equipped with electric heating Pre-silo: 4 m³ hardened concrete Control system: PC control system, conversion in 2022 Floor sealing plates: Renewed in 2023 Plant: Compact construction site plant with plug connections

Condition: good (used), Year of construction: 2001, Functionality: fully functional, Chuck lathe (automatic gripper chuck lathe) alternatively conversion to bar lathe possible With tapping drive and tapping spindle. TECHNICAL DETAILS largest clamping diameter normal, round 18.00 mm largest clamping diameter square 13.00 mm largest clamping diameter hexagonal 16.00 mm Spindle circle diameter:180 mm Bar feed (normal): 80 mm Longitudinal slide travel: 63/50 mm total / working travel Cross slide travel: 32/20 mm Infinitely variable spindle speed: 800-10,000 rpm Infinitely variable main time: 0.24-45 sec. Secondary time: 0.3 sec. Working spindles: 6 MACHINE DETAILS Weight approx. 4.5 to. EQUIPMENT incl. spindle stop device position 3+4 with extended stroke CNC cross slide on position 5 Coolant device Chip conveyor Dujlju Nh Dzon Tig Tet Loading device (gantry system) currently not connected but available, not included in the scope of delivery scope of delivery

Condition: excellent (used), Year of construction: 2011, Functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, controller manufacturer: Fanuc, controller model: i-Series, rotational speed (max.): 8,000 rpm, TECHNICAL DETAILS Travels X-axis: 1,270 mm Y-axis: 670 mm Z-axis: 625 mm Control system: i-Series Fanuc Work spindle Max. Speed: 8,000 min-¹ Drive units: 11 / 15 kW Max. Torque: 191 Nm Tool holder: SK / ISO 40 Work table Table clamping surface: 1,400 x 670 mm T-slots: 5 T-slots - width: 18 H8 mm T-slots - distance: 125 mm Max. Table load: 1,000 kg Distance between spindle nose and table: 150 - 775 mm Max. Workpiece height: 580 mm Tool magazine Number of tool positions: 30 positions Tool holder: SK / ISO 40 Max. Tool length: 300 mm Max. Tool diameter: 80 / 125 mm Max. Tool weight: 8.0 kg Tool - tool change time: 1.3 s Feed rates Rapid traverse (X / Y / Z): 30 / 30 / 24 m/min Feed speed: 1 - 12,000 mm/min Power requirement Total power requirement: 40 kVA Machine weight and space requirement Machine weight: approx. 9.0 t Space requirement (L x W x H): 6.0 x 5.0 x 3.5 m Dueln Tsu Hlg Ioig Tet EQUIPMENT documentation Coolant unit Chip conveyor Oil mist extraction Signal lamp Interface 4th axis Tool magazine Electric handwheel Measuring button Various tool holders approx. 40x Vice 2x

Condition: reconditioned (used), Functionality: fully functional, overall weight: 70,000 kg, total length: 22,200 mm, total width: 5,400 mm, TECHNICAL DETAILS Machine type: drum dryer Year of construction: 2021 (rebuilt) Engine power: 2 x 22 kW (new) Drive chains and sprockets: new Frequency converter: new Oven: 750 kW wood chip oven Air temperature: approx. 90 °C Drying capacity: approx. 1.5 t/h oak wood chips Max. drum temperature: 400 °C (drying capacity correspondingly higher) Dujlevgb A Isn Tig Tst MACHINE DETAILS Length: 22.2 m Diameter: 5.4 m Segmentation: can be dismantled into 6 parts Discharge: screw conveyor (new)

Condition: good (used), Year of construction: 2008, operating hours: 25,662 h, Functionality: fully functional, machine/vehicle number: 17951, TECHNICAL DETAILS Control: MATSUURA G-Tech 30i (FANUC 30i MA) for 3-axis simultaneous machining X-axis travel: 660 mm Y-axis travel: 660 mm Z-axis travel: 660 mm Speed range: 40 - 12,000 rpm B-axis: 360° Indexing increment: 0.001° Distance table surface - spindle nose: 80 to 680 mm Distance pallet surface - spindle center: 80 - 680 mm Distance pallet table center - spindle head: 120 - 720 mm Pallet size: 500 x 500 mm max. table load: 400 kg Max. workpiece size: Ø 650 mm x 750 mm Table surface: 40 holes â M16 x 2 mm pitch Pallet change time: 7.5 s Pallet change time (pallet to pallet): 15 s Number of pallets: 2 Number of magazine positions: 120 Tool diameter: with full occupancy Ø90 mm Tool diameter: with free neighboring stations Ø150 mm Tool length: 350 mm Tool change time (tool weight < 5 kg): 1.3 s Tool change time (tool weight > 5 kg): 2 s Chip-to-chip time (tool weight < 5 kg): 2.9 s Spindle holder with face contact: BT 40 JIS B 6339 Big+ Pull stud: BT 40 JIS B 6339 40P Inner diameter of the spindle bearing: 80 mm Spindle motor power (30%/100% ED): 22 / 15 kW Max. Torque (FANUC motor): 187 Nm up to 1,120 rpm Rapid traverse X-, Y- and Z-axis: 50 m/min Feed X-, Y- and Z-axis: 1 - 50,000 mm/min Stepless manual feed: 0 - 4,000 mm/min Positioning accuracy over the entire X-, Y- and Z-axis travel: ± 0.006 mm Repeat accuracy X-, Y- and Z-axis: ± 0.001 mm Changeover accuracy of different pallets in Y-axis: 0.01 mm Repeat accuracy of pallet clamping in X, Y and Z direction: 0.003 mm Indexing accuracy: 5" Repeatability of indexing: ± 2" Torque on table with FANUC drive: 380 Nm MACHINE DETAILS Dimensions: 3,340 x 6,740 x 2,533 mm Machine weight: 7,500 kg Total connected load: 51 kVA Supply voltage: 3 x 400V, 50 Hz Compressed air connection: 5.5 - 9.5 bar Compressed air consumption: max. 400 l/min Axle guides: Roller guides Lubrication: permanent grease lubrication X-, Y- and Z-axis power: 5.5/5.5/4.5 kW Axial force X-, Y- and Z-axis: FANUC motor 9.1/5.0/6.0 kN Acceleration/deceleration: 0.7 G EQUIPMENT Dsletwcvzen Tig Tsut - Preparation for magazine with 240 slots - Optical measuring system - Renishaw NC4 - RENISHAW OMP 60 measuring probe (EASY PROBE SOFTWARE included) - Measuring probe - Chip conveyor - Knoll high-pressure system - Extraction unit

Condition: good (used), Year of construction: 1998, operating hours: 12,786 h, Functionality: fully functional, Bed milling machine with universal milling head/two-axis milling head with automatic tool clamping TECHNICAL DETAILS Travel X / Y / Z: 1,500 / 1,000 / 1,000 mm Speed range: 30 - 3,500 rpm Drive power: 25 kW Swivel range: 360° Torque: max. 700 Nm (50 % ED) Tool holder: SK 50 Tool changer: Portal Tool positions: 24 Table size: 1,600 x 800 mm Feed X / Y / Z: 0.001 - 6 m/min Rapid traverse X / Y / Z: 10 m/min MACHINE DETAILS Connected load: 42 kW Machine weight: 12,500 kg Space requirement (LxWxH): 6.1 x 5.2 x 2.9 m EQUIPMENT Duoln Tigstqcq Rj Tet - Electronic handwheel - Heidenhain HR - Measuring probe

Condition: ready for operation (used), Year of construction: 2011, operating hours: 2,800 h, Functionality: fully functional, turning length: 100 mm, turning diameter: 100 mm, spindle speed (max.): 4,000 rpm, spindle bore: 42 mm, HIGHLIGHTS - Used exclusively for processing brass, therefore no above-average wear of the machine components - Extension of the tool system also includes driven tools - Service carried out exclusively by the manufacturer Müga itself - Extremely rare to find, very low number of operating hours - Expansion of the tool system to a total of 42 tools (only 29 with standard equipment) Note: no longer used in production for approx. 18 months TECHNICAL DETAILS Control system: Mitsubishi M700 Smallest input increment: 0.1 μm Linear axes rapid traverse: 20 m/min Main spindle C-axis: available Drive power: 7.5 kW Bar capacity: 42 mm Turning length: max. 100 mm Turning diameter: max. 100 mm Speed: max. 4,000 rpm Tool system: 20 pieces Counter spindle C-axis: available Drive power: 3.7 kW Spindle bore: 30 mm Doln Tiget Suf As Teut Turning length: max. 100 mm Turning diameter: max. 100 mm Pick-up diameter: max. 42 mm Spindle speed: max. 4,000 rpm Tool system: 22 pieces MACHINE DETAILS Weight: 4,200 kg Space requirement: 3,480 x 2,247 x 1,920 mm Pneumatic connection: 5 - 6 bar Connected load: 21 kW Back-up fuse: 35 A Parts ejector: pneumatic with electronic monitoring Rinser: Counter spindle Bar loading magazine: length 3.2 m / bar diameter 5 - 42 mm Magazine capacity: 28 bars with a diameter of 10 mm EQUIPMENT - Central lubrication - Chip conveyor - Swivel control panel - Finished part catcher - Collet chuck 173E (main spindle) - Finished part conveyor belt - Collet chuck 173E (counter spindle) - Interface for bar loader - C-axis main spindle - Intelligent handwheel - C-axis counter spindle - Control cabinet heat exchanger - Y-axis for main and counter spindle - Set-up elements - Coolant unit 250 liters - 3 x IKZ connection (4 bar) for 3 drilling tools on main spindle

Year of construction: 2006, operating hours: 7,150 h, Condition: good (used), Functionality: fully functional, 5-axis machining center from DMG - Deckel Maho Machine was recalibrated and aligned by service technician in September 2022 TECHNICAL DETAILS axes (X / Y / Z): 730 / 560 / 560 mm C-axis rotary table: Ø 600 mm C-axis: continuous B-axis tiltable: -30° / +120° spindle speed: 12.000 rpm rapid traverse: 30.000 mm/min working feed: max. 30 m/min workpiece weight: max. 700 kg table clamping surface: 1.000 x 600 mm ATC: available Cone: SK-40 DIN 69871 Magazine for tools: 24 positions CNC control: Heidenhain TNC 530 i switchable to ISO control Heidenhain HR-410 3D quick Set: available 3D probe: probe TS 642 Heidenhain DETAILS ABOUT THE MACHINE weight: 6.500 kg space requirement: approx. 3.5 x 3.5 x 2.5 m operating hours: 22.255 h spindle hours: 7.550 h motor power: 15 kW Total power requirement: 34 kVA Operating mode: 4 EQUIPMENT Dslnjlyqumj Tig Tout - chip conveyor - electr. handwheel - documentation - coolant device