Used hollow spindle lathes for sale (9)

Condition: ready for operation (used), functionality: fully functional, spindle bore: 42 mm, spindle speed (max.): 1,800 rpm, spindle speed (min.): 22 rpm, overall weight: 800 kg, total length: 1,600 mm, total width: 900 mm, The 3-phase 380V motor is running smoothly! Geared headstock, with gears running in oil. Dode Aiipcopfx Acgjwd 16 adjustable spindle speeds, ranging from 22 to 1800 RPM. Camlock D1-4 spindle nose. Powered crossfeed. Thread cutting is possible. Thread cutting dial. Heidenhain 2-axis digital readout (DRO). Metric lathe. Foot brake pedal. Emergency stop switch. Spindle safety guard. Original Colchester splash guard. MT3 tailstock. Quick-change toolpost with a total of 5 holders. Made in the UK. Good overall condition. Distance between centers: 700mm Center height: 165mm Spindle bore: 42mm Overall dimensions: 160x90x170cm Weight (approximate): 800KG Many accessories are included, as shown in the pictures in front of the lathe. This also includes a brand-new independent 4-jaw chuck. Contact us for shipping options! € 4,550.00

Condition: excellent (used), Year of construction: 2010, operating hours: 9,416 h, functionality: fully functional, feed length X-axis: 535 mm, feed rate Z-axis: 3,845 m/min, turning diameter over cross slide: 630 mm, turning diameter: 950 mm, turning diameter over top slide: 630 mm, spindle bore: 254 mm, spindle speed (max.): 630 rpm, total height: 1,850 mm, total width: 2,105 mm, Hankook Protec 9NC Hollow Spindle Oil Country Lathe Model: Protec 9NC Control: Fanuc 21i-TB Year: 2010 Spindle Bore: 254mm Capacity: 950 x 4000mm Swing Over Cross Slide: 630mm Spindle Speeds: To 630 RPM (2 Ranges) Main Motor: 37 KW Machine With: Double 4 Jaw Manual Chucks (front or rear) Duplomatic 8 Station Turret Dsdpfxjz S Nc Us Acgswd 2 x Fixed Steadies

Condition: good (used), Year of construction: 1986, Hollow Spindle Oil Country Lathe SARO SBF 710X2000 Made in Romania Year of manufacture: 1986 Dwjdpfx Acoumtbregod Main technical data: - Max. diameter passing through main spindle: 263.3mm - Max. swing over guideways: 710mm - Max. swing over cross slide: 400mm - Max. swing in gap: 950mm - Length between centres: 2000mm - Main spindle speed range: 4 – 500 rpm - Main motor power: 22 KW - Machine weight ab. 6,3ton The machine is in good condition. The electric equipment was changed with new one. For more information please contact us.

Condition: used, functionality: fully functional, turning diameter: 290 mm, center height: 145 mm, spindle bore: 35 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 52 rpm, total height: 1,200 mm, total length: 1,500 mm, total width: 700 mm, 3 Phase 380V motor is running fine! Left & right running. Electronic engine brake. Geared headstock, gears running in oil. 9 Spindle speeds adjustable from 52 up to 2000 RPM. Metric lathe. Norton gearbox for easy thread cutting. Power feed in both side as cross ways direction. Original Harrison splash guard. D1-3 Camlock spindle nose. Multifix quick change toolpost with a total of 4 toolholders. MT3 Tailstock intake. Distance between centers: 800mm Center height: 145mm Spindle bore: 35mm Overall dimensions: 150x70x120cm Made in the UK. Djdpswfiaqjfx Acgswd Contact us for shipping options! €3,900.00 Ex VAT

Condition: refurbished (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: Lehmann electrol 5035, turning diameter over cross slide: 914 mm, turning diameter: 914 mm, center height: 647 mm, turning diameter over top slide: 914 mm, spindle bore: 409 mm, spindle speed (max.): 500 rpm, spindle speed (min.): 10 rpm, turning diameter over bed slide: 1,295 mm, overall weight: 18,636 kg, swing diameter over cross slide: 914 mm, total height: 2,100 mm, total length: 5,500 mm, total width: 2,320 mm, air pressure: 7 bar, distance between centers: 2,844 mm, 16 1/8" Lehmann Hollow spindle Oil country Manual Lathe machine 5035 with attachments Semi-automatic threading system ,Taper Attachment,front & rear Chucks 36” 4-jaw, 16 ¼ hole Swing Over Bed Ways 51” - Swing Over Cross Slide 36” - Distance Between Centers 112” - Motor 75 HP 500 RPM Model: Lehmann electrol 5035 Djdpfx Acetp T Azjgowd Serial No: 501616-010 input voltage : 3 phase -380 - 460 V Manufacturer : Lehmann -USA Manufacturing date : 1982 Weight: 41,000 lbs.

Condition: new, neu Dsdpswiq Drofx Acgswd ca. 4 Monate ab Auftragse Bulgarien 138800 € 2623.32 € 1020 mm 2000 mm 510 mm 358 mm 770 mm 560 mm 361 MK 12 6,3 - 3 1/min 2 0.039 - mm/U 0.02 - 7.5 mm/U 76 0.5 - 0 mm 60 - 1/5 Gänge/" 0.125 - 37.5 240 - 4/5 505 mm 270 mm 105 mm 6 MK 225 mm 18.5 kW 6400 kg Their main purpose is to process pipes. Accordingly, this type of machines is widely used in the oil industry. Oil country lathes have large capabilities of processing inner and outer cylindrical and conical threads on pipes with large diameters. The clamping of the pipes with two universals and stands allows the processing of long pipes. These lathes are suitable for producing elements and equipment for the oil industry, as well as for maintaining such facilities. Drive via gearbox Electrodynamic brake 3-axis digital display Fagor Quick-change tool holder Amestra type D1, system like Multifix including 4 holders (3x rectangular, 1 round) 2 pcs. 3-jaw chuck Bison 3295 Dm. 660 mm on both sides of the spindle, max. 250 rpm,gripping range 5-400 mm. Option: hard top special jaws (outside only), gripping range 80-400 mm 2 pcs. steady rests on supports Dm. 160 - 360 mm with rollers Rapid traverses (4) Longitudinal stop for one position Taper turning device Coolant device Full length rear splash guard Lead and feed spindle cover Lathe chuck protection Tool holder protection Leveling bolts and plates Tailstock Reducing sleeve for the tailstock sleeve Mechanical movement of the tailstock with handwheel Low voltage machine light Operating instructions Equipment according to "CE" regulations Further models with spindle bore from 5 to 358 mm, centre distances from 1000 to 6000 mm and with turning diameters from 730 to 1020 mm are available on request.

Condition: new, neu ca. 4 Monate ab Auftragse Bulgarien 113720 € 2149.31 € 800 mm 2000 mm 400 mm Dwodpfx Acewiq E Aegod 3 mm 560 mm 560 mm 318 MK 12 8 - 400 1/min 2 0.039 - mm/U 0.02 - 7.5 mm/U 76 0.5 - 0 mm 60 - 1/5 Gänge/" 0.125 - 37.5 240 - 4/5 410 mm 0 mm 105 mm 6 MK 225 mm 11 kW 6100 kg Their main purpose is to process pipes. Accordingly, this type of machines is widely used in the oil industry. Oil country lathes have large capabilities of processing inner and outer cylindrical and conical threads on pipes with large diameters. The clamping of the pipes with two universals and stands allows the processing of long pipes. These lathes are suitable for producing elements and equipment for the oil industry, as well as for maintaining such facilities. Drive via gearbox Electrodynamic brake 3-axis digital display Fagor Quick-change tool holder Amestra type C, system like Multifix including 4 holders (3x rectangular, 1 round) 2 pcs. 3-jaw chuck Bison 3295 Dm. 500 mm on both sides of the spindle, gripping range 250-380 mm. Option: hard top jaws with gripping range 250-500 mm 2 pcs. steady rests on supports Dm. 120 - 320 mm with rollers Rapid traverses (4) Longitudinal stop for one position Taper turning device Coolant device Full length rear splash guard Lead and feed spindle cover Lathe chuck protection Tool holder protection Leveling bolts and plates Tailstock Reducing sleeve for the tailstock sleeve Mechanical movement of the tailstock with handwheel Low voltage machine light Operating instructions Equipment according to "CE" regulations Further models with spindle bore from 5 to 358 mm, centre distances from 1000 to 6000 mm and with turning diameters from 730 to 1020 mm are available on request.

Condition: new, neu ca. 4 Monate ab Auftragse Bulgarien 113620 € 2147.42 € 800 mm 2000 mm 400 mm 260 mm 560 mm 560 mm 318 MK 12 8 - 400 1/min 2 0.039 - mm/U 0.02 - 7.5 mm/U 76 0.5 - 0 mm 60 - 1/5 Gänge/" 0.125 - 37.5 240 - 4/5 410 mm 0 mm 105 mm 6 MK 225 mm 11 kW 6000 kg Their main purpose is to process pipes. Accordingly, this type of machines is widely used in the oil industry. Oil country lathes have large capabilities of processing inner and outer cylindrical and conical threads on pipes with large diameters. The clamping of the pipes with two universals and stands allows the processing of long pipes. These lathes are suitable for producing elements and equipment for the oil industry, as well as for maintaining such facilities. Drive via gearbox Electrodynamic brake 3-axis digital display Fagor Quick-change tool holder Amestra type C, system like Multifix including 4 holders (3x rectangular, 1 round) Dwodjwirghspfx Acgod 2 pcs. 3-jaw chuck Bison 3295 Dm. 500 mm on both sides of the spindle, gripping range 120-350 mm. Option: hard top jaws with gripping range 120-500 mm 2 pcs. steady rests on supports Dm. 60 - 260 mm with rollers Rapid traverses (4) Longitudinal stop for one position Taper turning device Coolant device Full length rear splash guard Lead and feed spindle cover Lathe chuck protection Tool holder protection Leveling bolts and plates Tailstock Reducing sleeve for the tailstock sleeve Mechanical movement of the tailstock with handwheel Low voltage machine light Operating instructions Equipment according to "CE" regulations Further models with spindle bore from 5 to 358 mm, centre distances from 1000 to 6000 mm and with turning diameters from 730 to 1020 mm are available on request.

Condition: new, spindle passage 230 mm Dodpfxoyqupae Acgewd turning diameter over bed 970 mm turning diameter over slide rest 720 mm Control Fanuc OiTD turning length 2200 mm total power requirement 37 kW Year of manufacture 2013 Control: Fanuc OiTD Other controls possible Turning length (mm) 2200 Max. turning diameter (mm) 970 Max. turning diameter over slide (mm) 720 Spindle diameter (mm) 230 Diameter range (mm) 850 Speed: 500 kW 37 Voltage: 400V Hz 50 Including: 4-jaw chuck, Ø 800 mm rear Pneumatic 3-jaw chuck, Ø 600 mm front The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team