Injection molding machine

battenfeld-cincinnati HDPE PIPE EXTRUSION LINE

Condition: excellent (used), Year of construction: 2018, operating hours: 17,000 h, clamping force: 220 kN, screw diameter: 50 mm, Year: 2018 Type of control: CC300 Number of hours: 17,000H Storage location: MECA PLASTIC Deadline: AVAILABLE Closing force: 220 T Dcjdsvtm Uispfx Ag Rjb Opening stroke: 530 mm Between columns: 620 mm x620 mm Plate dimensions: 900mm x900 mm Mini/max mold: 250/600 mm Max gap between plates: 1220 mm Screw diameter: 50mm Screw length: 20D cm3: 432 Bars: 2002 Motor power: 29kw Heating power: 15.3kw Closing weight: 11.3T Length dimensions: 6.30m Width dimensions: 1.80 m Height dimensions: 2.10 m Cores: NO Robot interface: YES Bimetal: YES

Condition: excellent (used), Year of construction: 2017, operating hours: 14,500 h, functionality: fully functional, 1,0 St. gebr. Zweikomponenten Spritzgießmaschine mit Roboter und Drehteller Hersteller: ARBURG Typ: 470S1100-400/290 Baujahr: 2017 Dcsdpfsu E E Suox Ag Reb Schließkraft: 110 Tonnen Holmabstand 420 x 420 mm Einbauhöhe min. /max.: 450 mm Öffnungsweg: 950 mm Schnecken DN 1: 35 mm Max. Hubvolumen: 154 cm³ Spritzteilgewicht: 141 g/PS Schnecken DN 2: 30 mm Hubvolumen: 106 cm³ Spritzteilgewicht: 97 g/PS Steuerung: SELGOCIA Ausstattung: 3 x Kernzüge Vertikale Spritzeinheit Drehteller 6 - ACHS Roboter, Hersteller: KUKA, Typ: KR 16 Wikut, Baujahr: 2010 Förderband Schutzzaun

Condition: good (used), Year of construction: 2023, operating hours: 50 h, Brand Ferromatik Milacron GmbH Type eQ-280 - 2290 Year of manufacture 2023 Machine hours 50 hours Clamping force 2,800 kN Screw diameter 60 mm Dcjdsw Ebpwepfx Ag Reb Injection pressure 2,238 bar Maximum shot volume 905 cm³ Max. distance between tie bars 710 x 660 mm Min. mould height 250 mm Distance between plates max. 1,400 mm Dimensions (LxWxH) 8,500 x 2,100 x 2,500 mm Weight 18,400 kg

Condition: used, Year of construction: 2015, Technical details: closing pressure: 6600 kN weight of the machine ca.: 45,5 t Dcedpfow I E R Njx Ag Rjb

Condition: excellent (used), Year of construction: 2017, WITTMANN BATTENFELD MacroPower 900/8800 Injection Moulding Machine Servo-hydraulic injection moulding machine Clamping force: 9,000 kN (900 tons) 🔹 General Information: Year of manufacture: 2017 Control system: UNILOG B8 Installed power: 53.9 kW Operating hours: only 999 Dcedpfx Agewzy N Uo Reb Dry cycle time: 4.0 – 770 sec/mm Machine dimensions (L x W x H): 10,100 × 3,400 × 2,700 mm Machine weight: 35,200 kg 🔹 Injection Unit: Screw diameter: 105 mm Injection volume: 4,545 cm³ Screw rotation speed: 159 rpm Screw L/D ratio: 22 Nozzle stroke / max force: 129 mm / 950 kN Max nozzle travel: 525 mm Number of heating zones: 7 🔹 Clamping Unit: Clamping force: 9,000 kN Max mould opening stroke: 1,800 mm Min / max mould height: 600 mm / 1,200 mm Max daylight (between platens): 2,400 mm Tie bar spacing (H × V): 1,450 × 1,100 mm Ejector stroke / force: 300 mm / 165 kN Mould opening force: 300 kN Core pulls: 2

Condition: good (used), Year of construction: 2014, operating hours: 29,646 h, clamping force: 900 kN, screw diameter: 100 mm, injection weight: 3,691 g, opening stroke: 1,120 mm, We are offering a HAITIAN MA 9000 injection molding machine in excellent condition, ideal for high-volume plastic production. This machine has been carefully maintained and has very low operating hours ( Dodexc U Hzepfx Ag Rjcb

Condition: excellent (used), Year of construction: 2015, WITTMANN BATTENFELD TM 400/3400 injection molding machine Control -UNILOG B6P Year of production – 2015 NUMBER OF HOURS WORKED 33756 ServoPower SO package: Servo drive with variable speed for hydraulic pump to increase energy efficiency and shorten cycle times according to EUROMAP 60 Cycle II and Cycle III Dcjdowqd Tcspfx Ag Rsb _____ Technical data of injection unit: • Screw diameter: 85 mm • L/D ratio (length to diameter): 22 • Specific injection pressure: 1574 bar • Injection volume (calculated): 2128 cm³ • Max. injection weight (PS): 1936.4 g _____ Technical data of closing unit: • Closing force: 4000 kN • Free space between columns: 710 × 710 mm (W × H) • Min. mold height: 300 mm • Max. plate spacing: 1380 mm • Opening stroke: 670 mm

Condition: ready for operation (used), Year of construction: 2020, operating hours: 10,000 h, functionality: fully functional, clamping force: 9,000 kN, screw diameter: 100 mm, displacement volume: 3,691 cm³, Clamping force 9000 kN Distance between tie bars (h x v) 1180 x 1000 mm Mould opening stroke 1600 / 1000 mm Mould height min 500 / 1400 mm Max. daylight 2400 mm Hydraulic ejector - stroke 300 mm Ejector force 195 kN Injection unit: Screw diameter 100 mm Ls/D ratio 22 Injection pressure 1800 bar Stroke volume 3691 ccm Shot weight (PS) 3359 gr. Screw speed 135 1/min Plasticising rate max. 793 g/s Electric and Hydraulic Equipment: Nominal capacity of pump motor 85 kW Installed heating capacity 71 kW Reservoir capacity 780 ltr. Dimensions and weights: Dimensions of the machine ca. 9,24 x 3,21 x 2,88 m Total machine weight 38000 kg Accessories: - Anti vibration pads - 4 x 8-fold water flower Dsdpfsxcakrox Ag Recb Additional Options: - 2 x Air valves - 2 x hydr. Core pulls on movable plate - 2 x hydr. core pulls on fix plate - 1 x pneum. Core pull on movable plate - 1 x pneum. Core pull on fix plate - Robot interface according to Euromap 67

Condition: excellent (used), Year of construction: 2004, operating hours: 30,665 h, functionality: fully functional, clamping force: 1,500 kN, screw diameter: 50 mm, clearance between the columns: 470 mm, displacement volume: 392 cm³, injection pressure: 1,670 bar, injection weight: 359 g, mold height (min.): 250 mm, overall weight: 4,900 kg, Equipment: documentation/manual, Here we, as a specialist dealer in injection moulding machines, offer the following well-maintained, used injection moulding machine for sale. Of course, we are also interested in purchasing well-maintained injection moulding machines from model year 2010 onwards. We have been wholesalers of used injection moulding machines for over 25 years. Current Note – Tax Information and Advantage for Used Machinery From July 1, 2025, used machines can benefit from a special depreciation allowance of 30% per year. In addition to the lower purchase price compared to new machines, you can also apply the same tax depreciations as for new equipment (Key term: Growth Booster, (§ 7 Section 2 EStG-E)). The machine is immediately available in our warehouse in Hannover, Germany and has been tested. Manufacturer: Arburg Type: 470C 1500-350 Serial No.: 196184 Year of Manufacture: 2004 Operating Hours: 30,665 h Dimensions (L/W/H): 4.50 x 1.60 x 2.10 m Weight: 4,900 kg Functionality: Fully operational Condition: Very well maintained Special Features Control: Selogica Screw diameter: 50 mm, highly wear-resistant Shot weight: 359 g Injection pressure: 1,670 bar Shot volume: 392 cc Clamping force: 1,500 kN Tie bar spacing: 470 x 470 mm Platen size: 650 x 650 mm Mold height: 250 mm Max. platen distance: 750 mm Ejector stroke/force: 175 mm Clamping unit: Hydraulic Dcedjxn Aygspfx Ag Rjb Motor power: 18.5 kW Heating power: 9.4 kW Total power: 30.0 kW Extras - 2 additional injection units: 25 mm and 30 mm - 1x core pull - Conveyor belt integrated into the machine bed - Handling interface - Geiger removal device - Selector unit - 2x air blowers - Accumulator for fast injection - Electrical connection for pneumatic shut-off nozzle - Technology level 2, servo-driven control pumps - 9 electrical heating control zones - Interface for temperature control unit (mold) - Interface for color dosing system - Equipment package - Advanced monitoring and motion controls, production management, optimization, operator assistance, quality assurance, and documentation Warranty up to initial commissioning Loading/Shipping Free loading onto buyer’s truck or delivery to site for reimbursement of freight cost from our warehouse in Hannover, Germany Financing On request – hire purchase option Available immediately from our warehouse in Hannover, Germany or delivered to your premises against freight cost reimbursement. The machine is offered fully functional, ownership is solely ours, and it can be viewed under power. About our company and machines: - We only sell machines we own, sourced from running production, available from our Hannover warehouse - All machines are inspected and tested before dismantling - We do NOT sell insolvency goods, nor do we act as brokers trading third-party equipment - All offered machines come from successful companies where maintenance and care are standard - All machines are available for inspection in our warehouse

Condition: good (used), Year of construction: 2019, EASYMASTER EM480-SVP-2 injection molding machines Injection volume 2164 cm3 Dodpeubuznsfx Ag Rocb Clamping force 480 T