BAUMULLER DS2-160MO54W-20-5-AO

BAUMULLER DS2-160MO54W-20-5-AO

Condition: new, functionality: fully functional, The Baumüller DS2-160MO54W-20-5-AO is a high-performance three-phase synchronous servomotor. These motors are designed for demanding industrial applications and feature high dynamic performance and water cooling (IP54 rating). Key specifications: • Series: DS2 Crsdpfozr H Shsx Aizoi • Frame size: 160 • Rotor length: M (Medium) • Protection / Cooling: IP54, water cooling (W) • Winding and rated parameters: These motors achieve high power outputs (e.g., at a speed of 2000 rpm, the power output is in the range of tens of kilowatts).

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 873 h, load capacity: 5,000 kg, lifting height: 3,300 mm, fuel type: diesel, mast type: duplex, construction height: 2,450 mm, fork carriage width: 1,200 mm, fork length: 2,400 mm, empty load weight: 7,850 kg, drive type: Diesel, construction width: 1,450 mm, Diesel forklift Load center: 600 Mast type: Duplex Technical condition: good Front tire size: 300-15/8.00 Rear tire size: 7.00-12/5.00 Sideshift, 3rd valve, 4th valve, front working lights, heater, full cab, CE certificate, safety light, Cedpfovgh U Rsx Aizori

Year of construction: 2012, condition: good (used), Medium-pressure conveying system for wood chips approx. 4 tons per hour Conveying line originally 180 m, 150 mm, partially available Air flow rate approx. 2,350 m³/h Motor power Three-phase motor according to IEC 55 kW Degree of protection IP54 1 Housing made of high-quality gray cast iron, equipped with two axis-parallel and centrally arranged, dynamically balanced rotary pistons, with hardened and ground, helically toothed precision control gears, each mounted in roller bearings. Drive via V-belts, with the two pulleys and the associated high-performance narrow V-belts, as well as a protective cover. 1 Drive unit with motor mounting rails, shaft connection with easy-to-assemble taper-lock clamping sleeves, completely mounted on a common base frame. 1 Combined intake filter silencer (absorption silencer) 1 Resonance absorption pressure silencer, designed as a base frame Crsdpsb Uyizefx Aizei 1 Base frame 1 Pressure valve 1 Check valve 1 Elastic connecting sleeve with clamps 1 Manometer 1 Set of vibration isolators with mounting screws 1 Electrical pressure monitoring consisting of a pressure transmitter and a display device, as well as an electrical output signal 1 Sound enclosure made of galvanized sheet steel with an oil collection tray and ceiling coating RAL 5001, segment design with internal lining and forced ventilation, fan wheel driven by the blower shaft. Sound enclosure for outdoor installation.

Condition: used, Year of construction: 2004, Technical details: length: 6006 mm width: 2440 mm height: 2590 mm motor power: 22 kw sound level: 66 dB(A) rated capacity: 22 KW operating pressure: 8.0 bar revolutions per minute of the motor:: 2.945 U/min temperature range: 3 - 45 °C weight of the machine ca.: Auf Anfrage t 20-foot container Crsdpoyx Tnrsfx Aizsi Compressor station – sound-insulated container with 2 compressor units 2 units SPX Hankison GmbH Type HHL 450 – a compressed air adsorption dryer (desiccant air dryer) for industrial compressed air systems. It is used to remove moisture from compressed air to prevent corrosion or freezing in machines, valves, or pneumatic systems. SPX Hankison HHL 450 Manufacturer: SPX Hankison Type: HHL 450 Design: Heatless desiccant dryer Max. operating pressure: 16 bar Connection: 2" NPT Series: HHL / HHS / HHE compressed air dryers These units operate with desiccant material (adsorption granulate) that binds water vapor from the compressed air. *

Condition: ready for operation (used), Year of construction: 1998, operating hours: 28,973 h, functionality: fully functional, overall weight: 2,750 kg, total length: 2,800 mm, total width: 1,150 mm, total height: 1,770 mm, power: 132 kW (179.47 HP), volume flow: 1,630 m³/h, type of cooling: water, input voltage: 400 V, input frequency: 50 Hz, operating temperature: 201 °C, pressure: 2.75 bar, rotational speed (max.): 12,874 rpm, type of input current: three-phase, Equipment: compressor, documentation/manual, type plate available, Only 2 units available! Aerzen VM 30 screw compressor Used to pneumatically unload railway cars. Manufacturer: Aerzen Type: VM 30 Volumetric flow rate: 27.17 m³/min (1630.2 m³/h) Pressure increase: 2.75 bar Compressor speed: 12874 rpm Shaft power: 105 kW Motor power: 132 kW Final temperature: 201 °C Cooling of the compressed air is done with water via a shell and tube heat exchanger. Year of manufacture: 1998 Dimensions: Length: 2800 mm Width: 1150 mm Height: 1770 mm Weight: approximately 2750 kg Operating hours: Codpfx Aijrkpp Hozeri Compressor 1: 28109 hours Compressor 4: 28973 hours Regular service was performed by a specialized service company! Not operated since 2019. Have been stored in a dry and heated location since then.

Condition: used, Gardner Denver Vacuum Pump S-VSI 100 - Dry-running, non-contacting screw vacuum pumps - Easy maintenance. - Suitable for industrial applications such as vacuum forming, metallurgy, and surface technology. - High efficiency due to a stepped screw profile. Technical data:   Suction capacity m3/h max. 100 at 50 Hz // 138 at 60 Hz Final pressure mbar (abs.) 0.1 Rated voltage 50 Hz/60 Hz: 230/400V ± 10% / 220/380V Motor power 50 Hz/60 Hz: 3 / 3.6 kW Current consumption 50 Hz/60 Hz: 10.5 / 6.0 Speed min 50 Hz/60 Hz: 2880 / 3550 Weight: 190 kg Cooling water consumption: 1.8 l/min Crjdpok Sgvcjfx Aizei Operating hours: Between 321 - 14613 hours Approximately 80% of the pumps have less than 4,000 operating hours. Since we have approximately 40 of these pumps, we ship them randomly. 1x Gardner Denver Vacuum Pump S-VSI 100 You can find more items – new and used – in our shop! International shipping costs available upon request!

Year of construction: 2007, condition: ready for operation (used), KAESER BB 88 C TURNING PISTON BLOWER, PVC POWDER FEEDER Unit: BB 88 C. Year of construction: 2007 Pumping speed: 5.07 m³ / min. Final pressure (abs): 1.01 bar Maximum pressure difference: 500 / mbar Rated motor power: 7.5 KW Block speed: 4,270 rpm Condition: very good Hablamos español Nous parlons français Cjdpjqafbzjfx Aizjri We speak English

Condition: used, Year of construction: 2002, Screw compressor, single-stage, oil-free. Max. flow rate approx.: 1080 m³/h Power: 75 kW Cedpfxjvcqt Io Aizsri Length: 1605 mm Width: 1250 mm Height: 2000 mm

Year of construction: 2020, condition: ready for operation (used), functionality: fully functional, For sale: AERZEN D62H rotary lobe compressor, manufactured in 2020. Technical data Manufacturer: AERZEN / Aerzener Maschinenfabrik GmbH Type: D62H Csdpfszucpnjx Aizeri Machine: Rotary Lobe Compressor / Drehkolbenverdichter Year of manufacture: 2020 Nominal motor power: 160 kW Max. suction pressure (abs.): 1.013 bar Max. discharge pressure (abs.): 2.513 bar Max. differential pressure: approx. 1.5 bar / 1500 mbar Unit weight: 2,790 kg Serial number: 4084095 Customer order no.: 223922 Industrial AERZEN compressor suitable for applications requiring high air volume at low pressure. The machine is equipped with the original manufacturer's nameplate. More information, additional photos and price available on request. Worldwide delivery can be arranged. Please contact us for further information.