Screw air compressor

Aerzen

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 794022, aerzener maschinenfabriek HmbH type: GM 25 S No.: 794022 Year of manufacture: 2001 kW: 22 Nwsdpfjw Nfx Nex Am Usk 1/min: 2960 m3/min: 22.5 bar p1: 1.0 bar p2: 1.0

Year of construction: 2012, condition: good (used), Medium-pressure conveying system for wood chips approx. 4 tons per hour Conveying line originally 180 m, 150 mm, partially available Air flow rate approx. 2,350 m³/h Motor power Three-phase motor according to IEC 55 kW Degree of protection IP54 1 Housing made of high-quality gray cast iron, equipped with two axis-parallel and centrally arranged, dynamically balanced rotary pistons, with hardened and ground, helically toothed precision control gears, each mounted in roller bearings. Drive via V-belts, with the two pulleys and the associated high-performance narrow V-belts, as well as a protective cover. 1 Drive unit with motor mounting rails, shaft connection with easy-to-assemble taper-lock clamping sleeves, completely mounted on a common base frame. 1 Combined intake filter silencer (absorption silencer) 1 Resonance absorption pressure silencer, designed as a base frame 1 Base frame 1 Pressure valve 1 Check valve 1 Elastic connecting sleeve with clamps 1 Manometer 1 Set of vibration isolators with mounting screws 1 Electrical pressure monitoring consisting of a pressure transmitter and a display device, as well as an electrical output signal 1 Sound enclosure made of galvanized sheet steel with an oil collection tray and ceiling coating RAL 5001, segment design with internal lining and forced ventilation, fan wheel driven by the blower shaft. Sound enclosure for outdoor installation. Nsdpfx Asb Uyizjm Uewk

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 787515, aerzen Nwsdpsw Nfzkjfx Am Uek type: GM 25 S No.: 787515 Year of manufacture: 2001 kW: 22 rpm: 2960 m3/min: 7.8 bar p1: 1.0 bar p2: 0.6

Year of construction: 2018, condition: reconditioned (used), Vacuum Blower GM 90SM after Regeneration, Nwedpfjv Rmpuox Am Uek Perfect condition -900 mbar 85m3/min 12-month warranty

Year of construction: 1997, condition: used, Trough length: approx. 7.8 m Screw diameter: 400 mm Nsdpfx Amjtppp Ds Uewk Conveying capacity 4 cbm/h double-walled with spur gear motor 4 kW

Year of construction: 2020, condition: ready for operation (used), functionality: fully functional, For sale: AERZEN D62H rotary lobe compressor, manufactured in 2020. Technical data Manufacturer: AERZEN / Aerzener Maschinenfabrik GmbH Type: D62H Machine: Rotary Lobe Compressor / Drehkolbenverdichter Nwedpszucpnefx Am Usk Year of manufacture: 2020 Nominal motor power: 160 kW Max. suction pressure (abs.): 1.013 bar Max. discharge pressure (abs.): 2.513 bar Max. differential pressure: approx. 1.5 bar / 1500 mbar Unit weight: 2,790 kg Serial number: 4084095 Customer order no.: 223922 Industrial AERZEN compressor suitable for applications requiring high air volume at low pressure. The machine is equipped with the original manufacturer's nameplate. More information, additional photos and price available on request. Worldwide delivery can be arranged. Please contact us for further information.

Condition: good (used), Year of construction: 2012, functionality: fully functional, Aerzen Delta Hybrid D75L Rotary Lobe Compressor Nodpfjyxnwhex Am Uswk

Condition: like new (used), Year of construction: 2018, Complete Aerzen D17L and D28L units are for sale. Nedpfx Amelnlr Ee Ujwk Manufactured in 2018, they are in excellent condition and equipped with 15 kW and 22 kW motors. Warranty included. For more information, please contact me by phone or email.

Year of construction: 2019, condition: refurbished (used), GM 90S blower, refurbished 12-month warranty New, unused model from 2025 also available. Nodpfx Aeztqfbjm Uowk

Condition: ready for operation (used), Year of construction: 1998, operating hours: 28,973 h, functionality: fully functional, overall weight: 2,750 kg, total length: 2,800 mm, total width: 1,150 mm, total height: 1,770 mm, power: 132 kW (179.47 HP), volume flow: 1,630 m³/h, type of cooling: water, input voltage: 400 V, input frequency: 50 Hz, operating temperature: 201 °C, pressure: 2.75 bar, rotational speed (max.): 12,874 rpm, type of input current: three-phase, Equipment: compressor, documentation/manual, type plate available, 3 Aerzen VM 30 screw compressors Used to pneumatically unload railway cars. Manufacturer: Aerzen Type: VM 30 Volume flow: 27.17 m³/min (1630.2 m³/h) Pressure increase: 2.75 bar Compressor speed: 12,874 rpm Shaft power: 105 kW Motor power: 132 kW Nedpfsrkpp Hox Am Uewk Final temperature: 201 °C The compressed air is cooled with water via a shell and tube heat exchanger. Year of manufacture: 1998 Dimensions: Length: 2800 mm Width: 1150 mm Height: 1770 mm Weight: approximately 2750 kg Operating hours: Compressor 1: 28,109 hours Compressor 2: 28,222 hours Compressor 4: 28,973 hours Regular maintenance was carried out by a qualified service company!! Not operated since 2019. Have been stored in a dry and heated location since then.

Year of construction: 1991, condition: ready for operation (used), Pressing force: 3200kN, stroke: 700mm, table dimensions: 2500x1300mm, weight: 63t, with documentation. Nwsdpjlc N R Djfx Am Usk

Year of construction: 2017, condition: excellent (used), AERZEN GM50 blower unit + 90kW motor AERZEN GM50L blower, serial no. 1546345, 89.90 kW, 55.16 m3/min, year 2015, 340 kg. Nsdpfxjy Twbxe Am Uswk SIEMENS motor, type 1LC4 283-2AB60-Z, 90kW, serial no. 034052502IM B3, 2975 rpm, 540 kg.

Condition: excellent (used), Aerzener VM 9 R Delta Screw Compressor with soundproof enclosure Intake pressure: 1 bar Nwsdogg Sgajpfx Am Uek Intake volume: 600 m³/h Motor power: 55 kW In very good condition, directly from production!!!

Condition: new, Year of construction: 2026, CORMAK MJ45-KB4 - 1600 Panel Saw with Scoring Unit The CORMAK MJ45-KB4 - 1600 is a professional panel saw with a scoring unit, designed for precise woodworking in carpentry workshops, production facilities, and service workshops. The machine combines industrial performance with the cutting accuracy required for processing furniture boards, MDF, and plywood. Its stable construction, independent scoring blade drive, and carefully engineered guiding systems ensure repeatability and industrial-level cutting quality. Main Advantages of the Machine 1600 mm aluminium sliding table – ensures smooth movement and precise guidance of the workpiece. Independent 0.75 kW scoring motor – eliminates the risk of chipping and tearing on the underside of the material. Powerful main saw motor – 5.5 kW (9 HP) motor provides efficient cutting performance even in hard materials. Stable cast iron construction – resistant to vibrations, improving precision and operational safety. Telescopic support arm with ruler and two stops – enables accurate positioning of the workpiece. Cutting width up to 1250 mm – ideal for formatting large panels. Ergonomic blade height and angle adjustment knobs – allow quick and tool-free setup. Construction and Technology The MJ45-KB4 - 1600 is built on a heavy cast iron body, providing high resistance to twisting and maintaining stable geometry throughout years of operation. The cutting unit operates inside a rigid housing, which reduces vibrations and increases blade durability. The sliding table guidance system is based on hardened steel rods and precision linear bearings, ensuring smooth movement and eliminating play during cutting. The machine is also equipped with a roller support table, making it easier to handle large-format materials. Precision and Work Efficiency Thanks to high blade speeds of up to 6000 rpm and a precise guiding system, the MJ45-KB4 panel saw provides perfectly straight and clean cutting edges, even when processing layered boards. The scoring blade, rotating at 8000 rpm, effectively eliminates laminate chipping and tearing. The adjustable cutting angle range of 0–45° allows complex formatting operations to be carried out with full control and accuracy. Applications Nwodpfxjtz Srlo Am Uok The MJ45-KB4 - 1600 panel saw with scoring unit is designed for intensive use in: woodworking workshops, furniture manufacturing plants, prototype departments, architectural and model-making studios. It is ideal for processing: MDF boards, HDF boards, OSB panels, plywood, laminates, solid wood. The machine design enables quick setup changes and efficient production of both short series and individual projects without compromising quality. Standard Equipment 1600 mm aluminium sliding table Independently driven 0.75 kW scoring unit Telescopic support arm with ruler and two stops Roller support table Folding parallel fence Telescopic rip fence Adjustment knobs for blade angle and height Technical Specifications Parameter Value Sliding table length 1600 mm Cutting width 1250 mm Saw blade tilt range 0–45° Cutting height at 90° 80 mm Cutting height at 45° 56 mm Maximum main blade diameter 315 mm Maximum scoring blade diameter 125 mm Main saw speed 4000 / 6000 rpm Scoring blade speed 8000 rpm Main motor power (S1/S6) 5.5 kW / 9 HP Scoring motor power (S1/S6) 0.75 kW / 1.2 HP Machine weight 460 kg

Condition: excellent (used), Aerzen GMA 13.6 rotary lobe blower Nodpfxjgin Elj Am Ujwk with sound-absorbing enclosure Motor power: 30 kW In very good condition, directly from production!!!