SEMI-AUTOMATIC VERTICAL BAND SAW

BEHRINGER LPS-T

Condition: new, power: 7.5 kW (10.20 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 600 mm, cutting width (max.): 620 mm, control type: PLC-controlled, actuation type: electric, rotational speed (max.): 150 rpm, rotational speed (min.): 15 rpm, total height: 3,120 mm, total length: 2,900 mm, total width: 2,750 mm, overall weight: 3,200 kg, table height: 1,150 mm, Equipment: CE marking, documentation/manual, lighting, motor brake, Advantages of the LPS-T band saw Rcodpfxez Rzg Ae Aireh Unsurpassed precision and cutting performance High cutting accuracy, smooth running, and long blade life are due to the special, torsion-resistant design of the saw frame. Unique feature: the force application of the saw feed is located directly below the cutting point. Servo feed system The use of the Behringer servo feed system ensures a constant chip removal rate and makes better use of the capabilities of modern saw blades. The rapid response of the servo feed system to the sensors of the cutting pressure control consistently prevents overloads and premature wear of the saw blades. Chip conveyor as standard Below the saw unit, directly in the direction of chip flow, there is a large chip conveyor with an integrated coolant tank. The chips and coolant generated are collected and separated in this tank. For cleaning and maintenance work, the conveyor can be moved out of the machine frame. Adjustable material support table For easy loading and unloading using a crane, the material table under the saw unit can be moved out. NC measuring device Optionally, the LPS-T band saw can be equipped with an NC-controlled measuring device. The cutting depth is digitally pre-programmed in the control panel. The material to be cut can be quickly aligned on the measuring device when placed and then securely clamped. This significantly speeds up the setup process. Fast blade change ensures the shortest setup times. In just two to three steps, the saw blade can be brought into the change position. Blade guide parts made of cast iron are made by Behringer and ensure vibration damping directly at the cutting point, thus increasing the tool life. Compact Due to its compact dimensions, the band saw can be installed even in confined spaces. Driven duplex chip brushes effectively clean the saw blade, thereby increasing the tool life. The brushes are automatically adjusted to the saw blade and ensure consistent cleaning performance.

Condition: used, Saw BEHRINGER HBE 321 A Dynamic Redpfx Ajx Tvkxsirjch

Condition: used, Year of construction: 2017, Behringer LPS 60-T – Vertical metal band saw - Servo feed with cutting pressure control - Robust cast iron band guide - Fast band change - Operating hours of the saw drive: 32441 h - Year of manufacture: 2017 Technical data - Working area L x W x H: 1260 x 720 x 600 mm - Minimum material height: 10 mm - Minimum section width: 5 mm - Inner table support area: approx. 1260 x 680 mm - Inner table max. load: 3000 kg - Outer table support area: approx. 1260 x 680 mm - Outer table max. load: 3000 kg - Material support height approx.: 1050 mm (incl. base pan) - Cutting speed: 10 - 110 m/min - Saw band dimensions: 5400 x 54 x 1.6 mm Rcsdpfx Aiez H Ac Asrjh - System/band tension pressure: 85 bar - Coolant quantity: approx. 100 l - Motor power – Saw drive: 5.5 kW - Motor power – Hydraulic pump: 2.2 kW - Motor power – Coolant pump: 0.15 kW - Motor power – Chip conveyor: approx. 0.26 kW - Connection value: approx. 10.5 kW - Voltage: 400 V, 50 Hz - Control voltage / hydraulic valve voltage: 24 V = (DC) - Current consumption: approx. 31 A - Fuse rating: 35 A - Conductor cross-section: min. 10 mm2 - Machine dimensions W x H x D: 3150 x 2970 x 2500 mm - Weight (net): approx. 3200 kg

Condition: excellent (used), Year of construction: 2023, HYDRAULIC HIGH PERFORMANCE BAND SAW LINE Manufacturer: BEHRINGER Model: HBM 440 A Year: 2023 Condition: As new – only 82 operating hours Technical Specifications: - Cutting range (round): 440 mm - Cutting range (flat WxH): 440 x 440 mm - Minimum round/flat: 15 mm / 12 x 12 mm - Saw band dimensions: 6700 x 54 x 1.1 mm - Drive power: 11 kW - Cutting speed: 15 – 150 m/min - Material feed length per stroke: 600 mm - Material feed length, multiple stroke: Max. 5400 mm - Machine weight: 4600 kg - Dimensions (LxWxH): 4900 x 2650 x 2700 mm - Transport height: 2700 mm Redpfx Aexw T Ugoirech All information subject to change – errors excepted Equipment & Features: - Coolant system 200 l - Full enclosure of the saw - Chip conveyor - BEHRINGER BT 65 TOUCH CONTROL + AUTO FEED CONTROL - Automatic bar change, max. 3000 kg Infeed: - Magazine KM 45 F-VR /600-6,200 mm - Round material: 50 – 440 mm - Flat: 40 x 20 – 400 x 400 mm or 440 x 430 mm - Bar length: 600 – 6200 mm - Driven roller conveyor: 6100 mm - Usable material storage: 3000 mm - Safety fence Outfeed: - Output side: metal belt, ejector plate, storage table Metal belt: - For transporting cut pieces, finished parts, and remnants - Width: 550 mm, length: 4200 mm - Guides on both sides up to 1000 mm length Side ejector for short bars (pusher) Storage table for cut material and stock: - Max. weight: 1000 kg - Length: 2400 mm - Usable depth: 1500 mm Subject to prior sale

Condition: ready for operation (used), Year of construction: 2023, An ABB robot in its original packaging is available. Payload: 180kg, reach: 3150mm, weight: approx. 1750kg. Documentation available. An on-site inspection is possible. Redpjxwyw Uofx Airjch

Condition: new, We sell spare parts for the following milling machines: FN20, FNGJ20/30, FNGJ32, FNGJ40, FNGJ50, FNGP, FNG CNC FB3, FB4, FB5, FB6 as well as for lathes S32. Rjdpfx Aieufgb Ijrjch

Condition: used, functionality: fully functional, Year of construction: 1997, 2 units Figee overhead crane, 35 tons, with swiveling hook, span approx. 18.60 m, and one unit approx. 21 meters, lifting height 10 meters. Rjdpsw S D Izefx Airjch

Condition: used, Year of construction: 2000, Manufacturer: STAM Model: Stam 2000-3 Year: 2002 Condition: Used Stock number: 0395 Uncoiler – max. weight (ton): 30 ton Uncoiler – max. width (mm): 2,000 mm Uncoiler – min. width: 400 mm Uncoiler – outer coil diameter: 1,800 mm Uncoiler – hydraulic expansion: 508 mm min. 610 mm max. Rcedpfx Aisywd Aksrsh Straightener – strip width: 2,000 mm Straightener – max. strip thickness: 3 mm Straightener – min. strip thickness: 0.6 mm Straightener – number of rolls: 17 Straightener – roll diameter: 46 mm Electronic feeder – min. pitch: 250 mm, max. pitch: 4,000 mm.

Condition: used, turning diameter 1.600 mm max. swing diameter 1.700 mm control SIEMENS - 840 D faceplate turning speed range 1 - 320 U/min rapid traverse 3.000 mm / min feed range 1 - 3.000 mm/min size of pallet 1.168 mm numbers of pallets 2 main drive 55 kW Vertical turret lathe with cnc | SCHIESS MOWEG - BERTHIEZ TFM 125 Rcjdpfsvp Shgox Airjh has been overhauled by SCHIESS MOWEG (RETROFIT) in 2007. The machine video from the production plant will be shared on request. The machine is in very good condition and was in operation at an aviation company until recently. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: TFM125 | TFM-125

Condition: new, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 800 mm, feed rate X-axis: 30,000 m/min, feed rate Y-axis: 30,000 m/min, feed rate Z-axis: 30,000 m/min, table length: 1,900 mm, table width: 1,100 mm, spindle speed (max.): 6,000 rpm, table load: 4,000 kg, position of the milling head: Vertikal, torque: 1,356 Nm, spindle nose: SK 50 - DIN 69871A, Equipment: rotational speed infinitely variable, The STARVISION DH 2012 impresses with its robust portal design, powerful drives, and high-quality components. It offers high precision, rigidity, and reliable machining – even for demanding machining tasks. Ideally suited for mold making, mechanical engineering, and contract manufacturing. Your advantages: ✔ Delivery and commissioning by JMT technicians ✔ Technical support and on-site service in Germany ✔ Training and instruction of operating personnel ✔ Flexible financing options: leasing or hire purchase Technical equipment: Control system: ✔ HEIDENHAIN TNC 7 control ✔ HEIDENHAIN TFT screen 19" ✔ HEIDENHAIN motors, measuring systems, and electronic handwheel Cooling: Internal coolant supply (IKZ) 70 bar Tool changer: 60-position chain magazine with dual gripper Chip removal: Hinged belt chip conveyor (transverse) Double screw conveyor (longitudinal) Preparation: Preparation for 4th axis (rotary table) Enclosure: Full enclosure, closed at the top Accuracy: Positioning accuracy: ± 0.025 mm Repeatability: ± 0.020 mm Rcsdpfx Aoq Ixc Tsirsh Contact us – we will be happy to advise you and prepare a customized offer for you.