Portal milling machine

STARVISION DH 2012

Condition: used, Year of construction: 2004, Technical details: x-travel: 750 mm y-travel: 600 mm z-travel: 520 mm table surface area: D 700 x 500 mm turning speeds: 42.000 1/min tool taper: HSK E50 control: HEIDENHAIN iTNC 530 tool change unit: 60 pos. rapid traverse: 50 m/min table load capacity - central/maximum: 350 kg total power requirement: 50 kVA weight of the machine ca.: 9 t dimensions of the machine ca.: 3,2 x 2,65 x 2,8 m 5-axis simultaneously HSC-machining center, NC-round-swivelling table B-axis 180°, C-axis 360°, chip conveyor, el. handwheel, laser, prepared for 3D touchprobe HEIDENHAIN TS 641 (without touchprobe), mode 4, oilmist suction, spindle chiller, no internal coolant supply, approx. 141.300 hours "machine on", approx. 64.500 hours "spindle on" in total machine in good condition (test report available) Fodpfewzx Nmjx Adaepd *

Condition: good (used), Year of construction: 2020, 5-Axis CNC Machining Center - Universal - Manufacturer: MAZAK Machine Model: Variaxis J-500 Control Unit: Mazatrol SmoothG Year of Manufacture: 2020 Number of Controlled Axes: 5 TECHNICAL DATA Travel - X-Axis (mm): 350 - Y-Axis (mm): 550 - Z-Axis (mm): 510 - Swivel Range A-Axis (degrees): -120 / +30 - C-Axis (rotary axis, rotary and tilt table): (degrees): 360 Feed Rate X/Y/Z (mm/min): 8,000 Rapid Traverse - X-Axis (mm/min): 30,000 - A-/C-Axis: 10,800 degrees/min. Spindle - Max. Spindle Speed (rpm): 12,000 - Drive Power (ED) 100 / 40 (kW): 7.5 / 11.0 Tool Magazine - Tool Holder: BT40/CAT40 - Pull Stud: Yamazaki ANSI Type - Number of Tool Positions: 30 - Tool Diameter (mm): 90 - Tool Length (mm): 300 Machine Table: Swivel rotary table Pallet System - Pallet Changer: 2-position - Clamping Table Dimensions (mm): 500 x 400 Swivel Rotary Table - Rotary Table Diameter (mm): 500 x 400 - Max. Workpiece Weight (kg): 200 FEATURES Fsdpfx Aeyabu Ijdajpd + Through-spindle coolant 70 bar + Hinged belt chip conveyor + Oil mist extractor + Tool length measurement and breakage control + Additional interior lighting + Signal tower (3-color) Subject to change and errors in technical details and specifications.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Multifunctional CNC Turning, Boring and Milling Centre / Manufacturer: WFL Type: M120 MILLTURN x 3000 / Year of construction: 2008, Overhauld in 2025 TECHNICAL DATA: Working range: - Centre distance / turning length (depending on clamping device): 3.000 mm - Swing diameter over bed (max. nominal dimension): 1.220 mm - Swing diameter over top of slide: 1.140 mm Accessories / Equipment: - Siemens SINUMERIK 840D CNC control pl - Turning/drilling/milling unit - NC tailstock - External tool magazine, 90-positions - Pick-up station - Cooling system - Chip conveyor - Further extensive equipment ... Detailed technical data sheet and information on equipment available on request. Fpodpfx Asxt Uqhedajd There is no guarantee for correctness and completeness of the technical details and accessories. - Subject to prior sale -

Year of construction: 2006, condition: ready for operation (used), Travel X/Y/Z: 800mm/800mm/800mm, feed force X/Y/Z: 15000N/15000N/17500N, feed speed X/Y/Z: 50m/min, max. rotary table speed: 25rpm, spindle diameter: 100mm, tool holder: HSK 100, spindle power S1-100%: 40kW, spindle speed: 6000rpm. Magazine capacity for a maximum tool diameter of 280mm: 23. Max. pallet dimensions X/Y: 630mm/630mm, max. pallets in the system: 6, coolant tank volume: 1500l, 50bar high-pressure pump delivery rate: 22l/min. Machine dimensions X/Y/Z: approx. 6300mm/4900mm/4000mm, weight: approx. 19,300kg, control: Siemens 840D powerline, operating hours: 74,637h. Includes integrated tool monitoring IPM, remote diagnostics via modem, Renishaw MP10 touch probe, RSP 4-position round storage, chip removal, coolant system with Knoll VRF 250 vacuum rotary filter, pallet changing device, 6 pallets, 4 of which are clamping towers with universal clamping bars, approx. 100 HSK 100 tool holders, and Losma filter system. Documentation available. On-site inspection is possible. Expected to be available from the end of January 2025. Fodpfx Adouxdhusajpd

Condition: new, Year of construction: 2025, 0330 mm 210 mm Fedpewp Tq Uefx Adaepd 1000 mm 167 mm 40 mm 2,2 kW

Condition: used, Column drilling machine ALZMETALL type AB 4 SV Machine no. No. 14805 Year of construction approx. 1980 drilling capacity 40 mm Spindle holder MK 4 - short quill throat 340 mm Quill stroke 180 mm Table size 710 x 560 mm Column diameter 160 mm Spindle speed 30 - 765 rpm infinitely variable Motor power 2.3 and 3.4 kW pole-changing Fpsdpfen N Ekcex Adaed Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and infinitely variable via variator gearbox - Reduction gear with 2 gear stages for high torque at low speeds - Spindle on/off via rotary switch or electric foot switch - Automatic feed 0.1 - 0.2 - 0.3 mm/rev - Table height adjustment via hand crank - Machine base with machined workpiece support surface - LED lighting device Space requirement L x W x H 1200 x 725 x 2050 mm Weight 615 kg good condition

Condition: excellent (used), CNC Lathe with y-axis DMG MORI - CTX BETA 800 4A MACH-ID 9282 Make: DMG MORI Type: CTX BETA 800 4A Control: Siemens 840 D-SL Fjdpoxuqw Hsfx Adaepd Year: 2012 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2013, condition: ready for operation (used), Turning length: 6000mm, orbital diameter over bed/support: 820mm/515mm, spindle bore: 128mm, speed: 1600rpm, spindle power: 46kW, center height: 400mm, bed width: 560mm, quill diameter: 125mm, quill stroke: 280mm, connected load: 62kW. Machine dimensions X/Y/Z: approx. 6500mm/2500mm/2300mm, control: Heidenhain, operating hours: approx. 9000h. Including accessories such as a steady rest. Documentation available. On-site inspection is possible. Fodpfsvwcwuex Adajpd

Condition: new, Year of construction: 2025, machine/vehicle number: JEWELliner XS30-PRO Std, input voltage: 230 V, type of input current: AC, laser power: 30 W, type of cooling: air, total width: 400 mm, total height: 500 mm, total length: 600 mm, overall weight: 55 kg, warranty duration: 12 months, height adjustment type: electric, door opening width: 400 mm, door opening height: 200 mm, laser wavelength: 1,064 nm, Developed, produced and checked in Germany. JEWELliner "XS-PRO" model series "Standard" with 30W CW laser power equiped with an electric lift door, an auto-focus function and is builded in a compact machine dimension to fit into most rooms. - Developed and produced in Germany - Other models, laser power and options on request. Fsdpfx Aec Rmy Nodaopd Engraving Laser (fiber technology) with security housing „LASER CLASS 1“. Compact designed, all components are in the housing and will be air cooled. Maintenance free! Materials: metals, ceramic and some plastics. Applications can found in the jewellery ans also in other production areas. machine dimension: L60xW40H50cm, to integrade simple into a production area. Samples of material: steel, stainless steel, gold, silver, titan, aluminium, brass, copper, brounce, carbon, ceramic, makrolon Possibilities of application: - graphic engraving (logo, draw, handdraws, signatures) - serial numbers - barcode, datamatrix, QR-code - ring inside (f.e. name, date, symbol, handwrite) optional - ring outside (f.e. name, endless graphic, endless pattern) optional - bangles inside/outside - optional - text (text straight, circled text, bowed text, text symbols) - handwrite - finger print - photo engraving (photos, pictures) - micro engraving (micro text till 0.25mm character high) - round engraving (engraving on round or bowed surfaces) optional main parts of JEWELliner "XS" PRO Modell "Standard" : - fiber laser unit with scan head and focus pointer - security housing „Laser Class 1“ with 200x140mm security glass - manual door opening - emergency button - 180° view area to the marking field - electrical z-axis for focus positioning - configured engraving software "BNMARK5" ! Made in Germany ! developed by BN Laser - optional - rotary axis with removable jewelry jaw chuck Specification: - laser technology: fiber laser - outputpower CW: 30W - available frequency: 1.8 - 2000kHz - connection type data: USB 2.0 - wave length: 1064nm - lens (delivery): F-Theta 163 - marking field size: 110 x 110 mm – smaller possible - focus range: ca. 1.7 mm - min character high: 0.25 mm - min. line width: 0.023 mm - cooling: air cooled - maintenance: no service necessary - power: AC 110V / 240V – 50/60Hz – short cut save - dimension: L600 x W400 x H500 mm - weight: 55kg The engraving laser is after the delivery immediately ready to use. In this way, the machine can be integrated in the production very fast. The machines can be inspected and tested by appointment. Pictures can be different!

Condition: excellent (used), Year of construction: 2022, CNC Lathe Doosan Puma 700 M II Control: Siemens Sinumeric 828 Year of manufacture: 2022 Turning length: 1,600 mm Turning diameter: 900 mm X-axis travel: 470 mm Z-axis travel: 1,650 mm Spindle speed: 3 – 1,500 rpm Tool turret: 12 stations (all driven) Tool holder: BMT 85P Equipment: Self-centering steady rest Chip conveyor Touch setter 3-jaw chuck Fedpfx Aeyk Tdisdajpd Programmable tailstock Extraction system Coolant pump 20 bar with cyclone filter Oil mist extractor