Eccentric press double column

BENELLI 2MR/2.12TE3

Condition: used, Year of construction: 1973, pressure 1600 t distance between columns 3160 mm ram stroke 1450 mm Bljdpfxovxwhws Aptep distance table/blankh.,max. stroke up,adjustm. up 2250 mm table surface area 4000 x 2200 mm ram pressure 1000 t pressure of blank holder 600 t stroke of blankholder at the bottom 1000 mm stroke of blankholder with adjustment 0-100 mm 1450 mm blank holder size 4000 x 2200 mm die-cushion pressure inside the table 360 t stroke of drawing cushion in table 275 / 400 mm ram surface 4000 x 2200 mm column travel -side 1100 mm die-cushion inside the table hydraulic, controlled die-cushion in pusher hydraulic, controlled oil volume 9000 l total power requirement 390 kW weight of the machine ca. 250 t dimensions of the machine ca. 6,0 x 4,3 x 10,5 m Head press (1600 tons) of a press line with five subsequent presses (800 tons)

Condition: used, Year of construction: 2021, functionality: fully functional, machine/vehicle number: A/18031, SCHULER - MSP2-800- 4,5x1,8-400 Kapasite: 800 ton Hava Tüketimi: 30 m³/saat Güç: 296 kW Bodpjzxqz Tsfx Aptjlp Üst Tabla Ebatları: 4500 mm x 1700 mm Alt Tabla Ebatları: 4500 mm x 1800 mm Pres Yükseklik: 7,5 m Pres En: 6,50 m Pres Genişlik: 4,50 m Dakikadaki Vuruş Sayısı(maksimum): 70 spm Çalışma Reglajı: 300 Kurs Değeri: 80-360 Used machine

Condition: used, Year of construction: 2006, functionality: fully functional, year of last overhaul: 2022, SCHULER GRÄBENER TMK 2-630 – 630 t Punching and Forming Press with Coil Feeding System Manufacturer: SCHULER / Gräbener Pressensysteme Type: TMK 2-630-3.0-50/210 S Year of Construction: 2006 Press Force: 6,300 kN / 630 t Design: Mechanical Punching and Forming Press / Single-Action Press For sale is a SCHULER GRÄBENER TMK 2-630 mechanical single-action press / punching and forming press with a press force of 6,300 kN, including a complete SCHULER automation strip guiding, straightening, and coil feeding system. The system was used for the mass production of punched and formed parts and is currently still fully assembled on site. Technical Data Press Rated Force: 6,300 kN Rated Stroke: 12 mm Stroke: 50–210 mm Stroke Rate: 15–60 strokes/min Max. Flywheel Speed: 960 1/min Ram Adjustment: 200 mm Max. Installation Height: 800 mm Table / Tooling Area: approx. 3,000 × 1,500 mm Max. Tool Dimensions: 3,000 × 1,500 × 800 mm Max. Tool Weight: 12,000 kg Blsdezv Utnepfx Aptjp Drive Power: max. 280 kW Rated Current: 420 A Compressed Air: 6 bar Hydraulic System: 400 bar Clutch / Brake: 6 bar Permissible Switching Rate Clutch / Brake: 16/min Machine Weight without Accessories: approx. 138,000 kg Coil and Feeding System SCHULER Automation / Gräbener Pressensysteme, Year of Construction 2006. Coil / Uncoiling Unit: Type AC-LH-160-0650 Strip Width: 40–600 mm Coil Outer Diameter: 900–1,800 mm Spreading Range: 470–530 mm Coil Uptake / Uncoiling Strip Guiding and Straightening System Threading / Strip Guiding Devices Automated Material Feeding Roller Guides Conveying / Removal Technology Complete Protective Enclosure Control / Operation SCHULER System Control Siemens SIMATIC Operating Components Siemens SIMATIC OP17 Touch Panel Separate Operating Panel for the Feeding System Setup Operator Devices Unidor Process / System Monitoring Condition and Maintenance The system was overhauled in 2022 for approximately €85,000. The maintenance history has been regularly recorded. Current maintenance and repair records are also available for 2026. The system is fully assembled on site and can be inspected by appointment. Scope of Supply The press system is sold, including the associated SCHULER automation and the existing coil, strip guiding, straightening, feeding, and removal technology, as well as the associated protective enclosure and operating / control devices, according to the existing system scope. Complete Service from a Single Source Upon request, we offer a complete project management service for this system – from financing to installation and commissioning at the new location. Possible Services: Individual financing and leasing solutions Organization and support for disassembly Heavy-load loading and transport International transport and export processing Organization of crane and heavy-load operations Reconstruction and assembly at the new location Support during commissioning Coordination of required service and specialist companies This allows the system to be taken over not only at the current location, but also as a completely organized machine project, depending on the customer's requirements. Location: Germany Availability: by arrangement Inspection: by appointment Disassembly / Transport / Reconstruction: can be completely organized upon request Financing / Leasing: upon request Technical data based on available documents and nameplates, subject to change and prior sale.

Condition: used, Year of construction: 2008, Manufacturer: Fritz Müller Bsdpfjy Ndz Rox Aptolp Machine type: Hydraulic drawing press Type: BZE 1200 – 35.1.1 Year of manufacture: 1972 General overhaul: 2008 Total drawing force, press ram: 1,000 – 12,000 kN Drawing force: 7,000 kN Holding force per cylinder: 200 – 1,250 kN Ram surface area: 3,500 × 2,200 mm Max. ram stroke: 1,330 mm Max. drawing depth: 430 mm Distance, table – holding cylinder, top dead center: 2,700 mm Distance, table – holding cylinder, bottom dead center: 1,420 mm Distance, table – ram, top dead center: 2,500 mm Distance, table – ram, bottom dead center: 1,200 / 1,600 mm Hydraulic table cushion, one-piece: Displacement force: 800 – 2,500 kN Stroke: 0 – 300 mm Cushion surface area: 2,700 × 1,200 mm Table clamping surface: 3,500 × 2,200 mm Clear width between guides: 3,550 mm Max. tool weight: 32 t Max. plate width: 2,200 mm Max. plate length: 1,600 mm Sheet metal thickness: 0.5 – 2.5 mm Feeding height above table: 650 – 900 mm Max. single part weight: 40 kg Max. stack height: 450 mm Max. weight per plate stack: 4.5 t Single or double plate feeding possible Electronic double sheet control available Rapid descent speed: max. 500 mm/s, unregulated Working speed: 30 – 115 mm/s Return speed: 30 – 600 mm/s Documentation: No digital data available Drawings: Partially available as ink drawings; on-site inspection possible Packing lists: No packing lists with individual weights available

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Two-crank mechanical press with a rigid frame structure. Manufactured by: SIMPAC INC., South Korea – 2019. 3-in-1 feeder line TAE IN TECH TNCL-5042 with an unwinder. Pressing force: 300 tons. Maximum pressing point (R.T.P.): 6.0 mm before the lower dead center. Slider stroke: 250 mm. Working speed: 22 – 45 strokes/minute (continuously adjustable with a frequency converter). Maximum die height: 650 mm. Slider adjustment: 120 mm. Work table: 2650 x 1100 mm, thickness 200 mm. Slider: 2350 x 1000 mm. Air pressure: 5 bar. Overall dimensions (L x W x H): 3600 x 2800 x 4650 mm. Machine weight: 50,000 kg. Motor power: 37 kW. Total weight of the line: approximately 56 tons. Total power consumption of the line: approximately 55-60 kW. Bodpfoy Twk Tjx Aptslp