Cold Circular Saw

BERG & SCHMID MINI COMPACT

Year of construction: 2018, condition: ready for operation (used), Various metalworking machines are available as remaining stock. 1/2/3) Three wobble riveting presses Thielicke GmbH & Co. KG WN6, year of manufacture: 1998. 4) Schlenker & Cie Atlas W4 high-speed planer, year of manufacture: 1961, weight: approx. 1700kg. 5) Spot welding machine J.u.W. Müller GmbH Opladen OMP67F, year of construction: 1960. 6) Ring welding machine Ing. G. Wenninger/BAPO KH III, year of construction: 1940s, conversion: 1964. 7) Cross-cut saw Berg & Schmid Mini Compact, year of construction: 2018. 8/9/10) Three presses. Including vices and lathe accessories. On-site inspection is possible. Individual sale possible. Bsdpfeu Tuvcsx Ak Hewl

Condition: used, turning length 800 mm turning diameter 280 mm turning diameter over slide rest 150 mm spindle bore 42.0 mm tailstock quill taper MT 3 MK bed width 208 mm turning speeds 42 - 2022 U/min spindle taper DIN 55027/5 quill stroke 90.0 mm voltage 380 V total power requirement 3.0 kW weight of the machine ca. 750 kg range L-W-H 1800 x 800 x 1250 mm Due to its design (type, performance, feed rates, etc.) it can be used successfully in training workshops, but also for toolmaking and repair shops. Bodpfoxacg Rox Ak Howl Equipment: - robust conventional lead/spindle lathe - WMW 3-jaw chuck Ø 150 mm - faceplate 280 mm - MULTIFIX quick-change holder, with insert - movable tailstock - chuck key - machine base with storage area - pole-changing drive motor - operating instructions

Condition: good (used), functionality: fully functional, Price reduction!!! For mitre cuts to the left up to 45° For sawing steel, stainless steel, and limited aluminium profiles Automatic cooling directly onto the saw blade 24 V safety switch in the handle with restart protection Total weight 38 kg = easy to transport Saw blade included Bwjdpfexx Dcwex Ak Hjl Accessories: Table with clamping device

Condition: new, current intensivity 200 A capacity at 100% load 150 A 230 V weight of the machine ca. 9,0 t dimensions of the machine ca. 0,46 x 0,15 x 0,32 m TIG welding system - New - 3m hose package - Additional 8m hose package - Ground cable - Gas connection hose Bjdpfewrzrxex Ak Hswl - Documentation

Condition: used, Year of construction: 2013, operating hours: 869 h, ----Construction: Travel speed 2.2-4.2 km/h, hydraulically adjustable undercarriage 1300-1500 mm, dozer blade 1500, trench depth 2320 mm, 3 cylinder water-cooled diesel engine type D1105-E2-BH-12, 1123 cm³, 19 HP, chain width 250 mm. Mechanical quick coupler, 2 additional hydraulic connections, grapple 450 mm with teeth. Sale only to commercial customers. ONLY THE NET PRICE IS TO BE PAYED FOR EXPORT !!!!! ALL INFORMATION IS PROVIDED WITHOUT GUARANTEE FOR EQUIPMENT + ACCESSORIES. Our general terms and conditions form the basis of all purchase contracts, invoices, pro forma invoices, orders and sales talks (see legal notice). Bwedpoidar Tsfx Ak Hel

Condition: new, table length 430 mm table width 240 mm x-travel 225 mm y-travel 160 mm table height 160 mm T-slots 12 mm weight 45 kg dimensions 0,6 x 0,45 x 0,2 mm Cross table with turntable Bwodoupw T Repfx Ak Hol

Condition: good (used), Year of construction: 2000, turning diameter 340 mm turning length 2000 mm control FAGOR 8055 swing diameter 550 mm spindle bore 108 mm spindle turning speed - stepless 2500 U/min power capacity 16.5 kW quill stroke 220 mm diameter of quill 100 mm total power requirement 19 kW weight of the machine ca. 4300 kg dimensions of the machine ca. 4300 x 1600 x 1800 m Bwsdjvwgpbspfx Ak Hel This EMCO E 300x2000 cycle lathe is supplied complete with all accessories. Description: - Coolant device - 1 piece Luenette open 20-145mm - 1 piece closed guide 15-185mm - 1 piece face plate - 1 piece three-jaw chuck - 1 piece wedge bar chuck D=400mm - Parat 4-fold tool holder - Various tool holders

Condition: used, Technical details: bore capacity in steel (diameter): 16 mm throat: 190 mm bore stroke: 60 mm Distance spindle/table max.: 250 mm range of revolution per miute: 410 / 725 / 1100 / 1700 bei 4step U/min spindle taper MT: MK 2 table surface area: 155 x 155 mm vertical adjustment: Tisch/table = 180 mm table rotating: 360 ° base plate surface area: 175 x 175 mm distance spindle center to floor plate:: max. 360 mm Bodpfx Asu Id Dzok Howl column diameter: 70 mm machine weight ab.: 65 kg dimensions L x W x H: 0,6 x 0,3 x 0,85 m Drill sleeve equipped with drill chuck 1 - 16 mm table rotatable *

Condition: good (used), Year of construction: 1992, machine/vehicle number: 145 K, Offer 24018 Technical data: - Drilling capacity in steel ST 60 28 mm - Drilling capacity in steel ST 60 32 mm - Drill spindle holder MK 3 - Drill spindle stroke 150 mm - 9 drill spindle speeds 104 - 1400 rpm - 2 feeds 0.1 / 0.2 mm/rev - throat depth 290 mm Bwodpfx Aou At Thek Hol - max distance table - drill spindle 780 mm - Table with 2 T-slots 480 x 400 mm - Height adjustable via rack and pinion with hand crank - Drive 400 V / 1.1 / 1.3 kW - Space requirement approx. W 600 x H 2100 x D 900 mm - Weight approx. 420 kg - with: - right - left rotation - Coolant device - Quick-action drill chuck 1-13 - lighting

Condition: used, WIG Welding Machine MESSER GRIESHEIM Type Combitig GW 23 AC/DC Unit functions only with DC welding and contact ignition Serial no.: 445276 Year of manufacture: approx. 1990 Output: 230 amps = 35% duty cycle 180 amps = 60% duty cycle 140 amps = 100% duty cycle Adjustment range: stepless Bjdpfx Akedzqa Is Hewl Current type: DC Mains connection: 400 V, 50 Hz, 32 A plug - 2-stroke / 4-stroke welding function - DC welding with contact ignition operational - AC welding and high-frequency ignition not operational - 7 meter hose package with TIG torch - Connector for remote potentiometer (foot pedal) - foot pedal not included - Air cooled - Gas pressure regulator Space requirements (L x W x H): 850 x 480 x 600 mm Weight: approx. 90 kg The welding test produces good results when welding stainless steel with DC current; high-frequency ignition is non-functional, but the arc can be triggered via a short contact. When welding aluminum with AC current, no arc is formed.