Belt sander

Bernardo MS 75 x 2000 S-2

Condition: new, width of the strips 75.0 mm band length 2000 mm Nwedpfxoxaarqe Ag Nsc band speed 14.5 + 29 m/sek grinding width 460 x 75 Plantisch mm Dust suction hood 100 mm total power requirement 3.0 kW 100% ED weight of the machine ca. 67.0 kg range L-W-H 1080 x 440 x 1000 mm Standard with 2 speeds, ideal for grinding stainless steel properties - Good sanding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous flat grinding surface for optimal grinding of long workpieces - Constant belt tension through spring-loaded tensioning device - Universally applicable for grinding edges, surfaces and for cylindrical grinding - Including quick-release system for quick strap changes - Simple adjustment of the parallel belt run by means of an adjusting screw - Graphite coating on the flat grinding surface increases the sliding properties of the Sanding belt scope of delivery - Sanding belt K 80 - Hinged protective screen - Sanding and support table - workpiece stop - Dust extraction nozzle - Separate off button - underframe

Condition: new, Year of construction: 2025, OSTAS PRE-MACHINERY TYPE KM 1,2 - Capacity 1,2 mm - Unloading 250 mm - With 8 sets of rolls CALL FOR MORE INFO DUTCHMACH Metalworking machines Nwjdpogg Nrkefx Ag Njc ENSCHEDE

Condition: new, Bernardo belt sander MS 75 x 2000 S-2 Technical specifications Belt dimensions 75 x 2000 mm Belt speed of 14.5 / 29 m / sec. How to contact with washer ø x W 200 / 80 mm Plan grinding table 460 x 75 mm Suction connection ø 100 mm S1 motor power output 100% 1.5 / 2.2 kW Motor power S6 40% 2,2 / 3,0 kW Voltage 400 V Length 1080 mm Width 440 mm Height 1000 mm Weight 67 kg Scope of delivery • Grinding belt grit 80 • Hinged safety glass • Grinding and supporting table Nsdpfxed Du S Uo Ag Njwc • Workpiece stop • Dust exhaust port • Motor protection switch • Rubber sanding drum • Graphite surface • Separate buttons • Base

Condition: new, MAXION BT 20 Bench drill Powerful MK2 machine with easy-scroll control wheel and large display. Digital drilling depth, piece counter, drill depth fine adjustment and LED light are already part of the standard equipment. Thus, the new BT20 combines innovative features with proven drive technology. Technical data: Njdpfx Agjf Nrbfj Njwc Normal drilling capacity 20 mm Tapping capacity M 16 Spindle MK 2 drilling depth 100 mm throat 215 mm distance spindle/base plate 185 - 541 mm table surface 340 x 445 mm T-slot width 12 mm column diameter 90 mm total height 990 mm weight 120 kg Motor pole-changing 0,6/1,2 kW Mains connection 400 V/50 Hz Two spindle speeds possible: MAXION BT 20 (M00027) Spindle speeds infinitely variable 100 - 1,800 min-1 MAXION BT 20 (M00028) Spindle speeds infinitely variable 240 - 3,600 min-1 Optional accessories Drilling package Tapping device with digital depth display 200 mm longer column Cross table MF3 base cabinet electric cooling device Note: ALSO AVAILABLE AS A COLUMN PIPE MACHINE

Condition: new, Special offer price for stock goods! Only while stocks last! Price ex stock, plus VAT. Belt sander: Bernardo type/model: MS 75 x 2000 S Condition: new belt dimensions: 75 x 2000 mm belt speed: 29 m/sec. contact wheel Ø x W: 200 / 80 mm surface grinding table: 460 x 75 mm suction connection: 100 mm motor output power S1 100%: 3,0 kW motor input power S6 40%: 4,0 kW Voltage: 400 V length: 1080 mm width: 440 mm height: 1000 mm Weight approx.: 66 kg Features: Good grinding performance due to high belt speed Quick adjustment for horizontal and inclined position Continuous plane grinding surface for optimum grinding of long workpieces Constant belt tension due to spring-loaded tensioning device Universally applicable for sanding edges, surfaces and for cylindrical sanding Including quick tensioning system for fast belt change Easy adjustment of parallel belt run by means of adjusting screw Graphite coating on the face grinding surface increases the sliding properties of the grinding belt Scope of delivery: - Sanding belt K 80 - Hinged protective disc - Grinding and support table Nsdpfx Ajfnr Aiog Newc - Workpiece stop - Dust extraction nozzle - Separate off button - Base frame

Condition: new, Bernardo universal lathe Titan 660 x 2000 Technical Specifications Centre distance 2000 mm Centre height 330 mm Swing diameter over bed 660 mm Swing diameter over cranking 900 mm Swing diameter over cross slide 460 mm Bed width 400 mm Spindle bore 105 mm Spindle mounting DIN 55029, D1-8 Speed range (16) 25 - 1600 rpm Range of longitudinal feeds (25) 0.044 - 1.48 mm/U Plan feed range (25) 0.022 - 0.740 mm/U Metric threads (54) 0.45 - 120 mm inch thread (54) 7/16 - 80 Gg/1″ Pinol diameter 90 mm Sleeve travel 235 mm Sleeve holder MK 5 Engine power 7,5 kW (10,0 PS) Machine dimensions (W x D x H) 3630 x 1200 x 1520 mm Weight approx. 2900 kg Features & Benefits Versatile application possibilities in general mechanical engineering, production, single part production, ... Central, handy switch for feeds and threads with guide and feed spindle Prism bed made of grey cast iron, inductively hardened and precision ground Modern main spindle bearings with angular contact roller bearings in precision design Hardened and ground gears and shafts, also in the feed gear Rapid traverse lengthwise and flat as standard to reduce non-productive times Large spindle bore (105 mm) for large diameter workpieces Soft start due to the mechanical multi-disc clutch Electromechanical foot brake to reduce non-productive time Nwsdpfsfbbx Rex Ag Noc Best cutting performance even during face turning For stiffening the bed guide and for minimizing

Condition: good (used), Year of construction: 2000, total height: 47,000 mm, total width: 27,000 mm, total length: 25,000 mm, table width: 1,000 mm, table length: 1,800 mm, overall weight: 43,000 kg, ram plate width: 600 mm, die cushion stroke: 200 mm, Siemens Simatic OP 27 control system Nwedpfxetiwgie Ag Noc Light barrier Sick Separate control cabinet Ritta Side passages Ground level installation

Condition: new, Wet exhaust system Nwedpoci Tlrefx Ag Nsc - available in steel and stainless steel - suction output 1650, 3750 or 7000 m3/h - engine 3,5.5 or 15 kW

Condition: new, Year of construction: 2025, PROFILE BENDING ATTACHMENT PB20 The PB20 profile bending attachment is the optimal supplement for tube bending on the 3000 and 6000 models. The device can be easily and quickly mounted on the bending shaft without the use of tools. The workpiece is clamped onto the turntable with the clamping device and pulled around the bending tool. With this system, leg lengths to be bent can be accurately measured in conjunction with a length stop and can be bent with repeatable accuracy. TECHNICAL DATA: Nedpfx Agjnh R Eke Nswc - Bending capacity steel 37: 100 x 10 mm, Ø 20 mm. - Many standard tools available - Special tools possible - Sharp-edged tools with bending radius R2 or 5 mm - round tools R 10 to 25 mm for bends max. 260° optional OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2024, cutting height (max.): 150 mm, cutting range round steel at 45°: 108 mm, cutting range round steel at 90°: 108 mm, BERG+SCHMID GBS 218 Eco AutoCut double mitre bandsaw Speed: 25-80 m/min - Mitre left 60° - For cutting steel, stainless steel and aluminum profiles - Quick-clamping vice with quick-clamping device a. - Built-in blade tension control b. - Saw blade guide made of carbide c. - Electric automatic cooling system - Machine base (supplied disassembled) The AutoCut system consists of: - Hydraulic cylinder, feed control, spring assembly, Nwedet I R Edopfx Ag Nsc limit switch and enables three work sequences: 1. automatic lowering of the saw frame via hydraulic cylinder with infinitely adjustable feed control valve and limit switch at the end of the cut 2. high-speed lowering of the saw frame from the rest position up to the workpiece, then switching to normal saw feed 3. manual operation - hydraulic cylinder works as a brake cylinder Saw blade dimensions: 2455x27x0.9mm Further accessories such as saw bands, roller conveyors, measuring stops, minimum quantity lubrication etc. available on request! Delivery time: ex stock Waiblingen Beinstein