Automatic Binding

Bindomatic 9000

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, 1 used steam boiler ----- - mounted on frame - Manufacturer: LOOS, Gunzenhausen Type: UL-S 1250 Output: 1,000 kg/h Permissible operating pressure: 13 bar Increased test pressure: 24.7 bar Total water capacity approx.: 2,320 l Duodoxnxflspfx Aa Not Year of manufacture: 10 / 2006 CE marking: CE 0036 Equipped with Weishaupt gas/oil burner GL5/1-D/ZMD, separate control cabinet, feedwater pump, and the existing coarse and fine fittings.

Condition: new, functionality: fully functional, Fervi T047/400VDA Gear-Driven Milling and Drilling Machine with Tapping 400V 1.5kW BRAND NEW “CE” CERTIFIED Promo price – single unit available while stocks last. The machine can be used for: Milling Drilling Tapping Drilling capacity in cast iron (with pilot hole): ø 40 mm Max drilling capacity in steel (with pilot hole): ø 32 mm Milling capacity with indexable cutter: ø 80 mm Djdpfx Aaog Npiwo Nout Milling capacity: ø 25 mm Tapping capacity: Ø 22 mm Taper: MT 4 Quill stroke: 130 mm Quill diameter: ø 76 mm Column diameter: ø 115 mm Head tilt: ± 60° Spindle speed: (12) 75 ÷ 3200 rpm Three-phase motor: 400 V 50 Hz 1.1 – 1.5 kW Table dimensions: 585 x 190 mm T-slot: 12 mm Base dimensions: 648 x 412 mm Overall dimensions: 740 x 790 x 1960h mm Weight: 390 kg.

Condition: good (used), Year of construction: 1962, High speed radial drilling machine, radial drilling machine, drilling machine, boom drilling machine, high speed radial drilling machine -Clamping table: 400 x 1100 mm -Projection: 930 mm -Taper mount: MK4 Duodpsirax Ujfx Aa Njt -Engine power: 1.35/1.8 kW -Speed: 41-1700 rpm -Columns: Ø 200 mm -Spindle stroke: 125 mm -Thread cutting device: YES -Feed: 0.075 - 0.3 mm/rev -Dimensions: 1800/1235/H2240 mm -Weight: 1500kg

Condition: used, Pillar drilling machines Dodpfx Aob N Ezroa Njut

Condition: used, machine/vehicle number: 87 54 41 57, Grinding wheel Ø: 200 mm grinding wheel width: 30 mm grinding wheel bore: 51 mm grinding wheel speed: 3000 rpm electrical connection: 380 V, 630 W space requirement: 600 x 260 x 320 mm Duodpfsdc Swuox Aa Nst Weight approx.: 23 kg

Year of construction: 1993, condition: excellent (used), 2 centrifugal pumps Manufacturer: KSB Model: WKF 50/7 Flow rate: 5.5 l/s (19.8 m³/h) Head: 214 meters (21.4 bar) Max. temperature: 130°C Seal: Mechanical seal with flushing water connection Electric motor: VEM Drive power: 30 kW Dujdpfxsibwaro Aa Not Speed: 2935 rpm ! Price per unit !

Condition: like new (used), functionality: fully functional, overall weight: 277 kg, total width: 650 mm, total length: 1,940 mm, total height: 1,050 mm, Plockmatic PBM 500 including BookFold Module and Trimmer Module. Dedpfx Ajyi Ta Uea Nout This booklet maker is in very good, lightly used condition! Counter readings: PBM 500: 86,305 BookFold Module: 173,595 Trimmer Module: 204,306 - Produces professional booklets inline or offline with stapling and folding. - Capacity: up to 50 sheets of paper (80 gsm) for folded booklets of approx. 200 pages - Supported paper sizes: width from approx. 206 mm to 320 mm, length up to approx. 457 mm - Compatible with A and B formats as well as many custom sizes. Looking for other configurations on the machine? We are flexible and can tailor the machine to your requirements! This machine has been inspected and thoroughly tested by our own specialized technical team. If you would like further information, please feel free to contact us. Worldwide shipping available.

Condition: excellent (used), Year of construction: 2017, Ref:11049 . 2017 Ideal 5221-95 EP Guillotine. 52cm programable guillotine Equipped with: Electro-mechanical blade and clamp drive Power ‘EP’ back gauge Control module Electronic hand wheel for manual back gauge positioning Infinitely variable speed control (from very slow to very fast) Optical cutting line Adjustable back gauge with narrow separations and plastic gliders Two side lays each on front and rear tables High-quality blade made from “Solingen steel” Solid steel blade carrier and adjustable blade guides Automatic clamping system, guided on both sides for evenly distributed clamping pressure Duodpfx Aaex Nfr Dj Njt Clamp can be lowered or raised independently from blade Machine and stand can be separated for transportation through narrow doors (70 cm) Side tables (left and right) SCS (Safety Cutting System): hinged, electronically controlled safety guard on the front table Transparent safety cover on the rear table Main switch and safety lock with key Electronically controlled true two-hand operation 24V controls (low voltage) Disk brake for instant blade stop Blade changing device with covered cutting edge Blade depth adjustment from the outside of the machine Easy blade change from the front of the machine without removing covers. Digital display for measurement readout in cm or inches (display accurate to 1/10 mm or 1/100 inch) 10-button keypad for presetting of measurement Memory key for repeat cuts | 9 programs with 9 steps in each program (up to 9 repeat cuts can be integrated into a program as one single program step) Setting of program steps via “Start” button ‘SET’ function key for reference measurement Programmable eject function – for pushing out the paper Two programmable keys for quick setting of frequently needed measurements Self-diagnosis system with error indication on display Specification: Cutting length: 520 mm Cutting height: 80 mm Narrow cut: 35 mm Table depth: 520 mm Power supply: 230 V / 50 Hz

Condition: new, Year of construction: 2023, operating hours: 1 h, functionality: fully functional, overall weight: 5,200 kg, fuel type: diesel, color: beige, power: 513 kW (697.49 HP), output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 408 kW (554.72 HP), nominal power (apparent): 510 kVA, continuous power: 368 kW (500.34 HP), total length: 4,460 mm, total width: 1,606 mm, total height: 2,493 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Doosan, type of cooling: water, AVS diesel generator set - stationary Type: DW 460 DO2 15 AK14A PRP output: 368 kW / 460 kVA ESP output: 408 kW / 510 kVA Operating hours: 1 Engine: DOOSAN DP158LC Power standby: 513 kW Speed: 1,500 rpm Operating voltage: 24 V Cooling: water-cooled Generator: Mecc Alte ECO 40-3S/4 B Voltage: 400/231 V Voltage regulator: DER-1/A Control panel: DSE 7320 - automatic emergency power supply Dimensions: 4460 x 1606 x 2493 mm (LxWxH) Weight: 5200 kg Dsdpfx Ajua Tl Aja Njut Equipment: Battery charger 5 Amper, battery disconnect switch

Condition: used, Year of construction: 1982, spindle diameter 90 mm Dedpstv H Ucjfx Aa Nsut x-travel 900 mm y-travel 900 mm z-axis 1200 mm w-axis 800 mm table surface area 900 x 1200 mm rotation movement 360 Grad table load 6,0 t turning speeds 25 - 1400 U/min spindle taper ISO 40 voltage 380 V / 50 Hz drive milling spindle 9,2 kW total power requirement 35 KVA weight of the machine ca. 10 t dimensions of the machine ca. 4,5 x 2,8 x 2,5 m • Machine had been completely refurbished in 1994 by the manufacturer • new switch cabinet, • new Servo-drive BOSCH and HEIDENHAIN-control TNC 360,(3D control) • valve plate Ø 600 mm. • traverse distance: 150 mm The machine is currently not ready for demonstration due to a fault in the electrical system.