Wheel loader

Blanche TW36 / 2024 / Palletbord / Shovel - Radlader - ...

Condition: ready for operation (used), Forklift truck Manufacturer: Jumbo Type: J60 DC12 Diesel Year of manufacture 1994 Payload: 6,000 kg Own weight: 9,260 kg Lifting height: 4300 mm approx. 25,000 operating hours Gbjdpfxovtwuas Ah Hsg Sold due to switching to wheel loader All service and lubrication intervals verifiably completed according to the inspection book! All filters (hydraulic, fuel, converter, air) replaced annually. Engine oil filter including oil every 250 operating hours. Only B0 was used as diesel fuel. (no B7) immediately available - fully functional Location: Austria, near St. Pölten

Condition: not inspected (used), Working length max. 400 mm Working width max. 150 mm Wood thickness max. 25 mm Hydraulic motor 2,2 kW 2 milling motors à 2,2 kW Godpfx Ahok Tyrwo Hjbg Spindle speed 12.000 rpm. Frequency converter 8 kVA, 200 Hz Weight ab. 1200 kg

Condition: not inspected (used), Year of construction: 1984, Turning length max. 1200 mm Gbodpep Dt Twsfx Ah Hog turning Ø max. 250 mm 2 hydraulic scanning supports spindle motor 5,5 kW hydraulic motor 2,2 kW

Condition: used, No. 3231 Extraction unit with briquetting press Spänex SHB 50 Used Complete disposal system for waste materials made of wood, paper, plastic, cotton, etc. The sawdust enters the chip bunker of the hydraulic briquetting press directly after the filter system. After compression, the briquettes are transported directly to the heating system. Technical data according to manufacturer's brochure: Capacity 50 kg/h (depending on material) Throughput 0.45 m3/h Briquette shape 8-cornered, 125 x 70 mm Motor power 5.5 kW Compaction 1:10 Moisture min. 8%, max. 20% Sale on behalf of customer, ex location near 69124 Heidelberg, without dismantling, without transportation and assembly Dismantling, loading and transportation by us optionally possible Errors in description and price reserved To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical information, description of condition, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale Any warranty is excluded for used machines, the following applies: “purchased as viewed” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Gjdpfx Ahjwqhwlj Hobg Terms of delivery: ex location

Condition: as good as new (ex-display), Year of construction: 2024, cutting length (max.): 12,000 mm, cutting width (max.): 1,000 mm, Small horizontal saw bench WRAVOR WRC 1000, the smallest in the range, fixed: 1000mm diameter solid wheels for a cutting diameter of 1M, sawing length adaptable according to the possible extensions of the chassis: currently 8M (12M chassis) Hydraulic equipment (claws/rollers, centerers, log turners) and mechanical • 4 hydraulic loading arms attached to the chassis • 3 pairs of claws / space for 3 others possible as an option • hydraulic lifting of the log on clamps, with 2 mechanical rollers and 1 driven roller, with the possibility of adjusting the height • Hydraulic centerers (up/down movement): 4 • Mechanical supports: 3 • Hydraulic lifting rollers: 3 • 90° angle centerers up/down movement: 3 • Standard hydraulic turners: 2 • 40l hydraulic generator tank and 16l for the 4Kw pump • Overhead electric cable fixed on rail and rollers • Mechanical table for outputting wood (2.5M, possible in hydraulic, tilting, 4M, connected to the control station as an option) Godsvr Ez Eepfx Ah Hebg Control station currently separate from the saw bench, Basic control system, Wravor program, Joysticks and head sawdust suction system as options Hydraulic adjustment of the blade tension / Electric scoring saw / Hydraulic hand for pushing sawn wood / Right/Left blade guides: centralization of blade lubrication / Head movement (worm screw)... PV 45 blade, length 6390, width 110mm

Condition: used, Year of construction: 2018, operating hours: 8,000 h, * JCB TM320S telescopic wheel loader Gsdoxy Uuaspfx Ah Hebg * Year of manufacture: 2018 * 8,000 operating hours * 108 kW JCB engine * Approx. 8,000 kg operating weight * Articulated steering * Hydraulic quick coupler * 3rd hydraulic circuit * 1.5 m telescopic reach * Max. lift height: 5.20 m * Max. dump height: 4.50 m

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, cutting length (max.): 6,000 mm, cutting width (max.): 1,050 mm, Versatile HORIZONTAL SAWMILL, DOUBLE CUT / in WRC 1050 "VENEER" version AUTOMATIC CUTTING and specific of THIN VENEER SLATS • Frame length: 11M for 6.5M log length, possible extensions • DOUBLE CUT SAW HEAD with adjustable mobile pressure guides to hold the blade during cutting. • STATION & CONTROL SYSTEM SEPARATE from the saw bench TO BE POSITIONED ACCORDING TO THE PLAN TO BE DEFINED – on the existing site, open station with or without seat integrating the control system • 45KW MAIN MOTOR WITH FREQUENCY INVERTER option • WORM SCREW provided in each of the side pillars / or 2 worm screws / with or without FREQUENCY INVERTER for faster up and down movement and more precise • MORE POWERFUL HYDRAULIC GENERATOR ON THE CHASSIS: 18KW + 200L TANK + FREQUENCY INVERTER - so that the hydraulic equipment on the chassis moves faster • FastSmartCut CONTROL SYSTEM, SCHNEIDER 4.0 base, / WRAVOR PROGRAM / 2 joysticks + touch screen is encrypted instead of the initial standard PLC 1040 system • Automatic HANDS sawn timber thrust - including the GUILLOTINE option which is priced: vertical arm for DIFFICULT timber, for more SPEED • 1 CAMERA - 1 screen, additional cameras possible as an option • HYDROFOR COOLING SYSTEM • LUBRICATION SYSTEM - in ELECTRIC version or mechanical pump • 5 pairs of hydraulic SPINDLES, including the option with hydraulic cylinder • 5 hydraulic ROLLERS up/down movement • 3 NEW CENTERING DEVICES (not at 90° angle) new generation • 3 NEW LOG TURNERS, new generation, V system (cradle) • ELECTRICAL wiring: flat cables, cased in a chute • SILON BELT output belt, 4M, automatic up/down movement controlled from the control system • Sawdust EVACUATION system by ZIPPER: by capture (vacuum cleaner on the frame) as close as possible to the cutting blade and possible connection with the existing EBT suction circuit: completes the VENEER system, more powerful than the standard • The CABLE SAW head traction system, SEW Asynchronous system for greater speed and precision: optional Differences between the standard horizontal saw bench and the specific saw bench for veneer: the saw has the following adapted equipment: - a reinforced fairing at the head to prevent any intrusion of sawdust between the flywheel and the blade. - additional protective shields due to more powerful and voluminous sawdust extraction Gbsdjvtqtvjpfx Ah Hog - double-cut blade - graphite blade guides (bakelite for the standard model) - special system for changing graphic blade guides - special protection of the chassis and sensors, plexi in the cover (different design of the saw head cover compared to the standard band saw) - additional sensors for blade deviation - pneumatic jet cleaning for the entire length of the saw bench OPTIONAL add-ons on request

Condition: new, Year of construction: 2025, Dealer wanted! Tariff number: 84659600 Briquette diameter: 70 mm Front bushing: 120 mm Briquette stroke max.: 100 mm Briquette stroke opt.: 80 mm Throughput (depending on material): up to max. 150 kg/h* Gbsdpfx Ahjvuccle Hsg *depending on bulk density *based on a bulk density of 200 kg per cubic meter Motor power: 5.5 kW Length: 2095 mm Width: 1300 mm Height: 1700 mm Weight: 1250 kg Oil quantity: 220 liters Silo diameter: 1200 mm Silo shape: 12-corner Silo content: approx. 1.0 qbm Pump: 75 liters Hydraulic pre-compressor The feed must be free of metals and mineral contamination. Damage to the pressing tools and/or increased wear may result.

Condition: used, functionality: fully functional, operating hours: 3,443 h, CLARK FORKLIFT LOAD CAPACITY: 50 Q. DIESEL NEW FORKS LENGTH: 1.80 MT. ORIGINAL FORKS LENGTH: 1.20 MT. (ALWAYS SUPPLIED) NEW SEAT WITH ELBOW REST MAX. LIFTING HEIGHT: 4.80 MT. WORKING HOURS: 3,443 Gbodewtffxepfx Ah Hjg SERVICE CARRIED OUT IN MAY 2025 READY FOR DELIVERY

Condition: like new (used), Year of construction: 2026, operating hours: 1 h, Super special price, as it was on display at our in-house exhibition. Operating hours: 2 Available immediately - subject to prior sale If gone - then gone Compact design, high reliability and an excellent price-performance ratio excellent price-performance ratio: these are the advantages of this machine, which is perfect for briquetting materials such as wood such as wood, polystyrene, foam or paper. Special feature: the screw pre-compaction, which guarantees a guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. mounted on a stable base frame Overall dimensions: 1900 x 1410 mm Hopper opening: 1044 x 1044 mm Hopper height: 1010 mm Hopper capacity: 1.1 m³ Drive power: 4 kW Briquette diameter (mm) 40 Throughput capacity (kg/h) 30-40 Hydraulic oil volume (l) 100 Weight (kg) 530 Equipment: Press Powerful pressing mechanism with low-wear, chrome-plated tongs Pre-compressor with end-sensitive cylinder and screwed cover Control box with PLC control Hydraulics Gbedpfetnz Hbsx Ah Hjg Separate oil tank with pump motor and valve control Safety switch for oil temperature Container with agitator and gear motor Screw channel with discharge screw and gear motor gear motor Accessories: Briquette length monitoring Automatic on - off Location: 54634 Bitburg